Effect of Sol-Gel Silica Matrices on the Chemical Properties of Adsorbed/Entrapped Compounds.

The sol-gel process enables the preparation of silica-based matrices with tailored composition and properties that can be used in a variety of applications, including catalysis, controlled release, sensors, separation, etc. Commonly, it is assumed that silica matrices prepared via the sol-gel synthesis route are "inert" and, therefore, do not affect the properties of the substrate or the catalyst. This short review points out that porous silica affects the properties of adsorbed/entrapped species and, in some cases, takes an active part in the reactions. The charged matrix affects the diffusion of ions, thus affecting catalytic and adsorption processes. Furthermore, recent results point out that ≡Si-O. radicals are long-lived and participate in redox processes. Thus, clearly, porous silica is not an inert matrix as commonly considered.

Tailoring the oxidizing intermediate in the Fenton reaction, OH• or FeIV=Oaq, by modifying the pKa of the (H2O)5FeII(H2O2) complex, and the case of PDS - a DFT study.

A DFT analysis of the Fenton and Fenton-like reactions points out that the pH effect on the nature of the oxidizing intermediate formed is due to a pKa of the peroxide when hydroperoxides are used. When S2O82- is used, the pH effect is due to the pKa of one of the water ligands of the central iron cation. The results suggest that the choice of the hydroperoxide and the ligands present affects the pH at which the transition from the formation of hydroxyl radicals to the formation of FeIV=Oaq occurs.

First-row transition metal carbonates catalyze the electrochemical oxygen evolution reaction: iron is master of them all.

In pursuing green hydrogen fuel, electrochemical water-splitting emerges as the optimal method. A critical challenge in advancing this process is identifying a cost-effective electrocatalyst for oxygen evolution on the anode. Recent research has demonstrated the efficacy of first-row transition metal carbonates as catalysts for various oxidation reactions. In this study, Earth-abundant first-row transition metal carbonates were electrodeposited onto nickel foam (NF) electrodes and evaluated for their performance in the oxygen evolution reaction. The investigation compares the activity of these carbonates on NF electrodes against bare NF electrodes. Notably, Fe2(CO3)3/NF exhibited superior oxygen evolution activity, characterized by low overpotential values, i.e. Iron is master of them all (R. Kipling, Cold Iron, Rewards and Fairies, Macmillan and Co. Ltd., 1910). Comprehensive catalytic stability and durability tests also indicate that these transition metal carbonates maintain stable activity, positioning them as durable and efficient electrocatalysts for the oxygen evolution reaction.

Unique activity of a Keggin POM for efficient heterogeneous electrocatalytic OER.

Polyoxometalates (POMs) have been well studied and explored in electro/photochemical water oxidation catalysis for over a decade. The high solubility of POMs in water has limited its use in homogeneous conditions. Over the last decade, different approaches have been used for the heterogenization of POMs to exploit their catalytic properties. This study focused on a Keggin POM, K6[CoW12O40], which was entrapped in a sol-gel matrix for heterogeneous electrochemical water oxidation. Its entrapment in the sol-gel matrix enables it to catalyze the oxygen evolution reaction at acidic pH, pH 2.0. Heterogenization of POMs using the sol-gel method aids in POM's recyclability and structural stability under electrochemical conditions. The prepared sol-gel electrode is robust and stable. It achieved electrochemical water oxidation at a current density of 2 mA/cm2 at a low overpotential of 300 mV with a high turnover frequency (TOF) of 1.76 [mol O2 (mol Co)-1s-1]. A plausible mechanism of the electrocatalytic process is presented.

Hydrogen adsorption on various transition metal (111) surfaces in water: a DFT forecast.

The hydrogen adsorption and hydrogen evolution at the M(111), (M = Ag, Au Cu, Pt, Pd, Ni & Co) surfaces of various transition metals in aqueous suspensions were studied computationally using the DFT methods. The hydrogens are adsorbed dissociatively on all surfaces except on Ag(111) and Au(111) surfaces. The results are validated by reported experimental and computational studies. Hydrogen atoms have large mobility on M(111) surfaces due to the small energy barriers for diffusion on the surface. The hydrogen evolution via the Tafel mechanism is considered at different surface coverage ratios of hydrogen atoms and is used as a descriptor for the hydrogen adsorption capacity on M(111) surfaces. All calculations are performed without considering how the hydrogen atoms are formed on the surface. The hydrogen adsorption energies decrease with the increase in the surface coverage of hydrogen atoms. The surface coverage for the H2 evolution depends on each M(111) surface. Among the considered M(111) surfaces, Au(111) has the least hydrogen adsorption capacity and Ni, Co and Pd have the highest. Furthermore, experiments proving that after the H2 evolution reaction (HER) on Au0-NPs, and Ag0-NPs surfaces some reducing capacity remains on the M0-NPs is presented.

Heterogeneous Electrocatalytic Oxygen Evolution Reaction by a Sol-Gel Electrode with Entrapped Na3 [Ru2 (µ-CO3 )4 ]: The Effect of NaHCO3.

The Na3 [Ru2 (µ-CO3 )4 ] complex is acting as a water oxidation catalyst in a homogeneous system. Due to the significance of heterogeneous systems and the effect of bicarbonate on the kinetic, we studied the bicarbonate effect on the heterogeneous electrocatalyst by entrapping the Na3 [Ru2 (µ-CO3 )4 ] complex in a sol-gel matrix. We have developed two types of sol-gel electrodes, which differ by the precursor, and are demonstrating their stability over a minimum of 200 electrochemical cycles. The pH increases affected the currents and kcat for both types of electrodes, and their hydrophobicity, which was obtained from the precursor type, influenced the electrocatalytic process rate. The results indicate that NaHCO3 has an important role in the catalytic activity of the presented heterogeneous systems; without NaHCO3 , the diffusing species is probably OH- , which undergoes diffusion via the Grotthuss mechanism. To the best of our knowledge, this is the first study to present a simple and fast one-step entrapment process for the Na3 [Ru2 (µ-CO3 )4 ] complex by the sol-gel method under standard laboratory conditions. The results contribute to optimizing the WSP, ultimately helping expand the usage of hydrogen as a green and more readily available energy source.

The Competition between 4-Nitrophenol Reduction and BH4- Hydrolysis on Metal Nanoparticle Catalysts.

Assessing competitive environmental catalytic reduction processes via NaBH4 is essential, as BH4- is both an energy carrier (as H2) and a reducing agent. A comprehensive catalytic study of the competition between the borohydride hydrolysis reaction (BHR, releasing H2) and 4-nitrophenol reduction via BH4- on M0- and M/M' (alloy)-nanoparticle catalysts is reported. The results reveal an inverse correlation between the catalytic efficiency for BH4- hydrolysis and 4-nitrophenol reduction, indicating that catalysts performing well in one process exhibit lower activity in the other. Plausible catalytic mechanisms are discussed, focusing on the impact of reaction products such as 4-aminophenol and borate on the rate and yield of BH4- hydrolysis. The investigated catalysts were Ag0, Au0, Pt0, and Ag/Pt-alloy nanoparticles synthesized without any added stabilizer. Notably, the observed rate constants for the 4-nitrophenol reduction on Ag0, Ag-Pt (9:1), and Au0 are significantly higher than the corresponding rate constants for BH4- hydrolysis, suggesting that most reductions do not proceed through surface-adsorbed hydrogen atoms, as observed for Pt0 nanoparticles. This research emphasizes the conflicting nature of BH4- hydrolysis and reduction processes, provides insights for designing improved catalysts for competitive reactions, and sheds light on the catalyst properties required for each specific process.

On The Nature of FeIV =Oaq in Aqueous Media: A DFT analysis.

FeIV =Oaq is a key intermediate in many advanced oxidation processes and probably in biological systems. It is usually referred to as FeIV =O2+ . The pKa's of FeIV =Oaq as derived by DFT are: pKa1=2.37 M06 L/6-311++G(d,p) (SDD for Fe) and pKa2=7.79 M06 L/6-311++G(d,p) (SDD for Fe). This means that in neutral solutions, FeIV =Oaq is a mixture of (H2 O)4 (OH)FeIV =O+ and (H2 O)2 (OH)2 FeIV =O. The oxidation potential of FeIV =Oaq in an acidic solution, E0 {(H2 O)5 FeIV =O2+ /FeIII (H2 O)6 3+ , pH 0.0} is calculated with and without a second solvation sphere and the recommended value is between 2.86 V (B3LYP/Def2-TZVP, with a second solvation sphere) and 2.23 V (M06 L/Def2-TZVP without a second solvation sphere). This means that FeIV =Oaq is the strongest oxidizing agent formed in systems involving FeVI O4 2- even in neutral media.

Overlooked Formation of Carbonate Radical Anions in the Oxidation of Iron(II) by Oxygen in the Presence of Bicarbonate.

Iron(II), (Fe(H2 O)6 2+ , (FeII ) participates in many reactions of natural and biological importance. It is critically important to understand the rates and the mechanism of FeII oxidation by dissolved molecular oxygen, O2 , under environmental conditions containing bicarbonate (HCO3 - ), which exists up to millimolar concentrations. In the absence and presence of HCO3 - , the formation of reactive oxygen species (O2 ⋅- , H2 O2 , and HO⋅) in FeII oxidation by O2 has been suggested. In contrast, our study demonstrates for the first time the rapid generation of carbonate radical anions (CO3 ⋅- ) in the oxidation of FeII by O2 in the presence of bicarbonate, HCO3 - . The rate of the formation of CO3 ⋅- may be expressed as d[CO3 ⋅- ]/dt=[FeII [[O2 ][HCO3 - ]2 . The formation of reactive species was investigated using 1 H nuclear magnetic resonance (1 H NMR) and gas chromatographic techniques. The study presented herein provides new insights into the reaction mechanism of FeII oxidation by O2 in the presence of bicarbonate and highlights the importance of considering the formation of CO3 ⋅- in the geochemical cycling of iron and carbon.

Reaction of FeaqII with Peroxymonosulfate and Peroxydisulfate in the Presence of Bicarbonate: Formation of FeaqIV and Carbonate Radical Anions.

Many advanced oxidation processes (AOPs) use Fenton-like reactions to degrade organic pollutants by activating peroxymonosulfate (HSO5-, PMS) or peroxydisulfate (S2O82-, PDS) with Fe(H2O)62+ (FeaqII). This paper presents results on the kinetics and mechanisms of reactions between FeaqII and PMS or PDS in the absence and presence of bicarbonate (HCO3-) at different pH. In the absence of HCO3-, FeaqIV, rather than the commonly assumed SO4•-, is the dominant oxidizing species. Multianalytical methods verified the selective conversion of dimethyl sulfoxide (DMSO) and phenyl methyl sulfoxide (PMSO) to dimethyl sulfone (DMSO2) and phenyl methyl sulfone (PMSO2), respectively, confirming the generation of FeaqIV by the FeaqII-PMS/PDS systems without HCO3-. Significantly, in the presence of environmentally relevant concentrations of HCO3-, a carbonate radical anion (CO3•-) becomes the dominant reactive species as confirmed by the electron paramagnetic resonance (EPR) analysis. The new findings suggest that the mechanisms of the persulfate-based Fenton-like reactions in natural environments might differ remarkably from those obtained in ideal conditions. Using sulfonamide antibiotics (sulfamethoxazole (SMX) and sulfadimethoxine (SDM)) as model contaminants, our study further demonstrated the different reactivities of FeaqIV and CO3•- in the FeaqII-PMS/PDS systems. The results shed significant light on advancing the persulfate-based AOPs to oxidize pollutants in natural water.

What Are the Oxidizing Intermediates in the Fenton and Fenton-like Reactions? A Perspective.

The Fenton and Fenton-like reactions are of major importance due to their role as a source of oxidative stress in all living systems and due to their use in advanced oxidation technologies. For many years, there has been a debate whether the reaction of FeII(H2O)62+ with H2O2 yields OH• radicals or FeIV=Oaq. It is now known that this reaction proceeds via the formation of the intermediate complex (H2O)5FeII(O2H)+/(H2O)5FeII(O2H2)2+ that decomposes to form either OH• radicals or FeIV=Oaq, depending on the pH of the medium. The intermediate complex might also directly oxidize a substrate present in the medium. In the presence of FeIIIaq, the complex FeIII(OOH)aq is formed. This complex reacts via FeII(H2O)62+ + FeIII(OOH)aq → FeIV=Oaq + FeIIIaq. In the presence of ligands, the process often observed is Ln(H2O)5-nFeII(O2H) → L•+ + Ln-1FeIIIaq. Thus, in the presence of small concentrations of HCO3- i.e., in biological systems and in advanced oxidation processes-the oxidizing radical formed is CO3•-. It is evident that, in the presence of other transition metal complexes and/or other ligands, other radicals might be formed. In complexes of the type Ln(H2O)5-nMIII/II(O2H-), the peroxide might oxidize the ligand L without oxidizing the central cation M. OH• radicals are evidently not often formed in Fenton or Fenton-like reactions.

On the reactions of Cu(II/I)ATP complexes with methyl radicals.

The CuI/IIATP react with methyl radicals to form methane and methanol, where CuIATP reacts with •CH3 in a process that is surprisingly slow. The low-rate constant of this process is attributed to the significant rearrangement of the chelating ligand required for the transient's formation. These results were corroborated by DFT calculations of the relevant compounds.

DFT Study of the BH4 - Hydrolysis on Au(111) Surface.

The mechanism of the catalytic hydrolysis of BH4 - on Au(111) as studied by DFT is reported. The results are compared to the analogous process on Ag(111) that was recently reported. It is found that the borohydride species are adsorbed stronger on the Au0 -NP surface than on the Ag0 -NP surface. The electron affinity of the Au is larger than that of Ag. The results indicate that only two steps of hydrolysis are happening on the Au(111) surface and the reaction mechanism differs significantly from that on the Ag(111) surface. These remarkable results were experimentally verified. Upon hydrolysis, only three hydrogens of BH4 - are transferred to the Au surface, not all four, and H2 generation is enhanced in the presence of surface H atoms. Thus, it is proposed that the BH4 - hydrolysis and reduction mechanisms catalyzed by M0 -NPs depend considerably on the nature of the metal.

Visible Light-Induced Catalyst-Free Activation of Peroxydisulfate: Pollutant-Dependent Production of Reactive Species.

Activation of peroxydisulfate (PDS, S2O82-) via various catalysts to degrade pollutants in water has been extensively investigated. However, catalyst-free activation of PDS by visible light has been largely ignored. This paper reports effective visible light activation of PDS without any additional catalyst, leading to the degradation of a wide range of organic compounds of high environmental and human health concerns. Importantly, the formation of reactive species is distinctively different in the PDS visible light system with and without pollutants [e.g., atrazine (ATZ)]. In addition to SO4•- generated via S2O82- dissociation under visible light irradiation, O2•- and 1O2 are also produced in both systems. However, in the absence of ATZ, H2O2 and O2•- are key intermediates and precursors for 1O2, whereas in the presence of ATZ, a different pathway was followed to produce O2•- and 1O2. Both radical and nonradical processes contribute to the degradation of ATZ in the PDS visible light system. The active role of 1O2 in the degradation of ATZ besides SO4•- is manifested by the enhanced degradation of contaminants and electron paramagnetic resonance spectroscopy measurements in D2O.

Reactions of methyl, hydroxyl and peroxyl radicals with the DOTA chelating agent used in medical imaging.

The mechanism of reaction of DOTA (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid) with ·CH3, CH3O2· and ·OH radicals were studied. The radicals were formed in situ radiolytically. The methyl radicals react orders of magnitude slower with DOTA and with MIII(DOTA)- than the hydroxyl radicals. The various final products were identified and mechanisms for their formation are proposed. CH3O2· radicals do not react, or react too slowly to be observed, with DOTA and with MIII(DOTA)- as long as the central cation is not oxidized by the peroxyl radical. The results imply that synthesis of the MIII(DOTA)-(MIII = radioisotope) complexes in a water-organic solvent (ethanol or 2-propanol or acetonitrile) mixture is not only kinetically desired but the so formed complex also decreases the radiolytic decomposition of DOTA.

Calculating the adsorption energy of a charged adsorbent in a periodic metallic system - the case of BH4- hydrolysis on the Ag(111) surface.

The hydrolysis of borohydride on the Ag(111) surface is explored theoretically to obtain the in-depth reaction mechanism. Many heterogeneously catalyzed reactions like this involve the adsorption of charged species on metals. DFT calculations of charged systems, with periodic boundaries, face serious problems, concerning convergence and reliability of the results. To study the heterogeneously catalyzed reactions, a simple method to calculate the adsorption energy of charged systems in metallic periodic cells is proposed. In this method, a counter ion is placed at a non-interactive distance, in an aqueous medium, so that the calculated system is neutral. Bader analysis is used to validate that the calculated couple is charged correctly. Adsorption energies of F-, Cl-, Br-, OH-, BH4-, ClO4- and H- ions on the Ag(111) surface in an aqueous medium were determined using Na+ and K+ as counter ions, to evaluate the performance of this method. The adsorption of the divalent ions S2-, Se2- and SO42- on different surfaces was studied as well. Then this method was used to explore the hydrolysis of BH4- ions, which have a high theoretical hydrogen storage capacity, on the Ag(111) surface. The results point out that during the catalytic hydrolysis only one hydrogen atom from borohydride is transferred to the surface. In the first step one hydrogen atom from BH4- is transferred to the silver surface; this H atom reacts with a hydrogen atom that is released from an adsorbed water molecule; in addition, a hydrogen molecule is released in the second step (one atom from *BH4- and one from *H2O). Thus, the mechanisms of the catalyzed reductions by BH4- and the hydrogen evolution reactions must be reconsidered.

The Role of Common Alcoholic Sacrificial Agents in Photocatalysis: Is It Always Trivial?

Photocatalytic hydrogen production is proposed as a sustainable energy source. Simultaneous reduction and oxidation of water is a complex multistep reaction with high overpotential. Photocatalytic processes involving semiconductors transfer electrons from the valence band to the conduction band. Sacrificial substrates that react with the photochemically formed holes in the valence band are often used to study the mechanism of H2 production, as they scavenge the holes and hinder charge carrier recombination (electron-hole pairs). Here, we show that the desired sacrificial agent is one forming a radical that is a fairly strong reducing agent, and whose oxidized form is not a good electron acceptor that might suppress the hydrogen evolution reaction (HER). In an acidic medium, methanol was found to fulfill both these requirements better than ethanol and propan-2-ol in the TiO2 -(M0 -NPs) (M=Au or Pt) system, whereas in an alkaline medium, the alcohols exhibit a reverse order of activity. Moreover, we report that CH2 (OH)2 is by far the most efficient sacrificial agent in a nontrivial mechanism in acidic media. Our study provides general guidelines for choosing an appropriate sacrificial substrate and helps to explain the variance in the performance of alcohol scavenger-based photocatalytic systems.

Advanced sol-gel process for efficient heterogeneous ring-closing metathesis.

Olefin metathesis, a powerful synthetic method with numerous practical applications, can be improved by developing heterogeneous catalysts that can be recycled. In this study, a single-stage process for the entrapment of ruthenium-based catalysts was developed by the sol-gel process. System effectiveness was quantified by measuring the conversion of the ring-closing metathesis reaction of the substrate diethyl diallylmalonate and the leakage of the catalysts from the matrix. The results indicate that the nature of the precursor affects pore size and catalyst activity. Moreover, matrices prepared with tetraethoxysilane at an alkaline pH exhibit a better reaction rate than in the homogenous system under certain reaction conditions. To the best of our knowledge, this is the first study to present a one-step process that is simpler and faster than the methods reported in the literature for catalyst entrapment by the sol-gel process under standard conditions.

Redox Properties of CeIVDOTA in Carbonated Aqueous Solutions. A Radiolytic and an Electrochemical Study.

The redox chemistry of CeIIIDOTA in cage in carbonate solutions was studied using electrochemistry and radiolysis techniques (continuous radiolysis and pulse radiolysis). Spectroscopic measurements point out that the species present in the solutions at high bicarbonate concentrations are [CeIIIDOTA(CO3)]3- (or less plausible [CeIIIDOTA(HCO3)]2-) with the carbonate (bicarbonate) anion as the ninth ligand versus [CeIIIDOTA(H2O)]- present in the absence of bicarbonate. Electrochemical results show a relatively low increase in the thermodynamic stabilization of the redox couple CeIV/III in the presence of carbonate versus its aqueous analogue. [CeIVDOTA(CO3)]2- and [CeIVDOTA(H2O)], prepared electrochemically, decompose photolytically. However, kept in the dark, both are relatively long lived; [CeIVDOTA(H2O)], though, is orders of magnitude kinetically more stable (a considerably longer half-life). Thus, one concludes that the carbonate species have a different mechanism of decomposition depending also on the presence of dioxygen after its preparation (in deaerated/aerated solutions). The [CeIVDOTA(CO3)]2- species is produced radiolytically by oxidation of the trivalent species by CO3•- with a rate constant, measured using pulse radiolysis, of 3.3 × 105 M-1 s-1. This rate constant is at least 1 order of magnitude smaller than most of the rate constants so far reported for the reaction of CO3•- with transition metal/lanthanide (cerium)/actinide complexes. This result together with the bulkiness of the reactants might suggest an outer-sphere electron transfer rather than the inner-sphere one so far proposed. The lifetime of the tetravalent cerium species obtained radiolytically in the presence of carbonate is shorter than the electrochemical one, suggesting a different conformer involved.