Chemical welding of binary nanoparticles: room temperature sintering of CuSe and In2S3 nanoparticles for solution-processed CuInS(x)Se(1-x) solar cells.

Chemical welding of oppositely charged dissimilar metal chalcogenide nanomaterials is reported to produce a quaternary metal chalcogenide. CuSe and In2S3 nanoparticles were synthesized with opposite surface charges by stabilizing with polyacrylic acid and polydiallyldimethylammonium chloride. Upon mixing these nanoparticles at room temperature, the electrostatic attraction induced coalescence of these nanoparticles and led to the formation of CuInSxSe1-x nanoparticles.

Label-free electronic detection of bio-toxins using aligned carbon nanotubes.

A facile route for sensitive label-free detection of bio-toxins using aligned single walled carbon nanotubes is described. This approach involves patterning of a catalyst on the surface of a quartz substrate using a sub-100 µm stripe-patterned polydimethylsiloxane stamp for aligned carbon nanotube generation followed by fabrication of field effect transistor (FET). Atomic force microscopy, field emission scanning electron microscopy and Raman spectroscopy are employed to characterize the synthesized nanotubes. Unlike previous reports, the adopted approach enables direct electronic detection of bio-toxins with sensitivities comparable to ELISA. As a proof of concept, the fabricated FET responds to nM concentration levels (with a LOD of ∼2 nM) of epsilon toxin produced by Clostridium perfringens and a prominent food toxin. This facile approach could be customized to detect other classes of toxins and biomarkers upon appropriate functionalization of the aligned carbon nanotubes. Finally, we demonstrate the use of the FET-platform for detection of toxin in more complex matrices such as orange juice.

Effect of Organic and Inorganic Passivation in Quantum-Dot-Sensitized Solar Cells.

The effect of semiconductor passivation on quantum-dot-sensitized solar cells (QDSCs) has been systematically characterized for CdS and CdS/ZnS. We have found that passivation strongly depends on the passivation agent, obtaining an enhancement of the solar cell efficiency for compounds containing amine and thiol groups and, in contrast, a decrease in performance for passivating agents with acid groups. Passivation can induce a change in the position of TiO2 conduction band and also in the recombination rate and nature, reflected in a change in the ß parameter. Especially interesting is the finding that ß, and consequently the fill factor can be increased with the passivation treatment. Applying this strategy, record cells of 4.65% efficiency for PbS-based QDSCs have been produced.

Novel hollow mesoporous 1D TiO2 nanofibers as photovoltaic and photocatalytic materials.

Hollow mesoporous one dimensional (1D) TiO(2) nanofibers are successfully prepared by co-axial electrospinning of a titanium tetraisopropoxide (TTIP) solution with two immiscible polymers; polyethylene oxide (PEO) and polyvinylpyrrolidone (PVP) using a core-shell spinneret, followed by annealing at 450 °C. The annealed mesoporous TiO(2) nanofibers are found to having a hollow structure with an average diameter of 130 nm. Measurements using the Brunauer-Emmett-Teller (BET) method reveal that hollow mesoporous TiO(2) nanofibers possess a high surface area of 118 m(2) g(-1) with two types of mesopores; 3.2 nm and 5.4 nm that resulted from gaseous removal of PEO and PVP respectively during annealing. With hollow mesoporous TiO(2) nanofibers as the photoelectrode in dye sensitized solar cells (DSSC), the solar-to-current conversion efficiency (η) and short circuit current (J(sc)) are measured as 5.6% and 10.38 mA cm(-2) respectively, which are higher than those of DSSC made using regular TiO(2) nanofibers under identical conditions (η = 4.2%, J(sc) = 8.99 mA cm(-2)). The improvement in the conversion efficiency is mainly attributed to the higher surface area and mesoporous TiO(2) nanostructure. It facilitates the adsorption of more dye molecules and also promotes the incident photon to electron conversion. Hollow mesoporous TiO(2) nanofibers with close packing of grains and crystals intergrown with each other demonstrate faster electron diffusion, and longer electron recombination time than regular TiO(2) nanofibers as well as P25 nanoparticles. The surface effect of hollow mesoporous TiO(2) nanofibers as a photocatalyst for the degradation of rhodamine dye was also investigated. The kinetic study shows that the hollow mesoporous surface of the TiO(2) nanofibers influenced its interactions with the dye, and resulted in an increased catalytic activity over P25 TiO(2) nanocatalysts.

Effect of gas pressure on electron field emission from carbon nanotube forests.

This article quantifies the effect of the operating pressure of the H2 + C2H4 gas mixture on the current density and threshold voltage of the electron emission from dense forests of multiwalled carbon nanotubes synthesized using thermal catalytic Chemical Vapor Deposition under near atmospheric pressure process conditions. The results suggest that in the pressure range of interest 400-700 Torr the field emission properties can be substantially improved by operating the process at lower gas pressures when the nanostructure aspect ratios are higher. The obtained threshold voltage approximately 1.75 V/microm and the emission current densities approximately 10 mA/cm2 offer competitive advantages compared with the results reported by other authors.

Aligned carbon nanotubes on quartz substrate for liquid gated biosensing.

A facile and high performance biosensing platform using aligned carbon nanotubes on quartz substrate is reported in this communication. Single walled carbon nanotubes are grown on quartz substrates by a chemical vapor deposition process and are characterized with field emission scanning electron microscopy and atomic force microscopy in order to verify the quality of the material. The quartz substrate is then directly used as a biosensor in a field effect transistor configuration. In order to demonstrate the sensing capabilities of the fabricated sensor devices, electronic detection of prostate specific antigen, a potential cancer biomarker, is carried out by adopting liquid gated configuration. A conductivity change due to the specific binding of target antigen with the immobilized receptor antibody demonstrates the sensing capabilities of the fabricated device. Sub-nM detection sensitivities have been obtained using the adopted direct immunoassay approach, which shows that the device responds to clinically relevant concentration regimes.

Pulse electroplating of copper film: a study of process and microstructure.

Copper films with high density of twin boundaries are known for high mechanical strength with little tradeoff in electrical conductivity. To achieve such a high density, twin lamellae and spacing will be on the nanoscale. In the current study, 10 microm copper films were prepared by pulse electrodeposition with different applied pulse peak current densities and pulse on-times. It was found that the deposits microstructure was dependent on the parameters of pulse plating. Higher energy pulses caused stronger self-annealing effect on grain recrystallization and growth, thus leading to enhanced fiber textures, while lower energy pulses gave rise to more random microstructure in the deposits and rougher surface topography. However in the extremes of pulse currents we applied, the twin densities were not as high as those resulted from the medium or relatively high pulse currents. The highest amount of nanoscale twinning was found to form from a proper degree of self-annealing induced grain structure evolution. The driving force behind the self-annealing is discussed.

DNA sensing by field-effect transistors based on networks of carbon nanotubes.

We report on the sensing mechanism of electrical detection of deoxyribonucleic acid (DNA) hybridization for Au- and Cr-contacted field effect transistors based on single-walled carbon nanotube (SWCNT) networks. Barrier height extraction via low-temperature electrical measurement provides direct evidence for the notion that the energy level alignment between electrode and SWCNTs can be affected by DNA immobilization and hybridization. The study of location-selective capping using photoresist provides comprehensive evidence that the sensing of DNA is dominated by the change in metal-SWCNT junctions rather than the channel conductance.