ABSTRACT
Plasmonic Au-Cu nanostructures composed of Au and Cu metals, have demonstrated advantages over their monolithic counterparts, which have recently attracted considerable attention. Au-Cu nanostructures are currently used in various research fields, including catalysis, light harvesting, optoelectronics, and biotechnologies. Herein, recent developments in Au-Cu nanostructures are summarized. The development of three types of Au-Cu nanostructures is reviewed, including alloys, core-shell structures, and Janus structures. Afterwards, we discuss the peculiar plasmonic properties of Au-Cu nanostructures as well as their potential applications. The excellent properties of Au-Cu nanostructures enable applications in catalysis, plasmon-enhanced spectroscopy, photothermal conversion and therapy. Lastly, we present our thoughts on the current status and future prospects of the Au-Cu nanostructures research field. This review is intended to contribute to the development of fabrication strategies and applications relating to Au-Cu nanostructures.
ABSTRACT
Colloidal nanocrystals (NCs) play an important role in the field of optoelectronic devices such as photovoltaic cells, photodetectors, and light-emitting diodes (LEDs). The properties of NC films are strongly affected by ligands attached to them, which constitute a barrier for charge transport between adjacent NCs. Therefore, the method of surface modification by ligand exchange has been used to improve the electrical conductivity of NC films. However, surface modification to NCs in LEDs can also affect emission characteristics. Among NCs, nanorods have unique properties, such as suppression of nonradiative Auger recombination and linearly polarized light emission. In this work, CdSe/CdS nanorods (NRs) were prepared by the hot injection method. To increase the charge transport into CdSe/CdS NRs, we adopted ligand modification to CdSe/CdS NRs. Using this technique, we could shorten the injection barrier length between CdSe/CdS NRs and adjacent layers. It leads to a more balanced charge injection of electron/hole and a greatly increased current efficiency of CdSe/CdS NR-LEDs. In the NR-LEDs, the ligand exchange boosted the electroluminance, reaching a sixfold increase from 848 cd/m2 of native surfactants to 5600 cd/m2 of the exchanged n-octanoic acid ligands at 12 V. The improvement of CdSe/CdS NR-LED performance is closely correlated to the efficient control of charge balance via ligand modification strategy, which is expected to be indispensable to the future NR-LED-based optoelectronic system.
ABSTRACT
The preparation and modification of crystal structures in cryogenic environments with conventional methods is challenging, but it is essential for the development of composite materials, energy savings, and future human space exploration. Plasmon induced hot carriers and local thermal effects help to overcome the challenges of chemical reactions under extreme conditions, for which molecular reactions have attracted considerable research attention. In this work, the plasmon thermal effect enables fast and efficient nanocrystal transformation in cryogenic environments, which was previously unattainable with conventional heating methods. The transformation of NaYF4 nanocrystals on gold nanoparticle island films can be achieved even in a low temperature environment of 11 K. Compared with the structure with gold nanoparticles adhered to NaYF4 nanocrystals directly, the structure of gold nanoparticle island films with an Al2O3 layer offered better heat trapping properties, which allows the complete transformation to take place of NaYF4 nanocrystals into Y2O3 nanocrystals in low temperature environments. This work explores the potential of applying the photothermal effect of a plasmon to induce rapid transformation of nanocrystals in extreme environments and provides insight into the process of crystal transformation and growth.
ABSTRACT
Plasmonic nanocavity is widely used for enhancing light-matter interaction. Here, an efficient plasmonic nanocavity of the cube-plate system is constructed for the fluorescence enhancement of rice-like CdSe/CdS nanorods (NRs) with tunable emission wavelength. Over ten thousand times fluorescence enhancement is achieved with the assistance of the plasmonic nanocavity. Additionally, a small splitting effect is observed in both photoluminescence and scattering spectra of the NRs in the nanocavity owing to the intermediate coupling effect between the NRs and plasmonic nanocavity, which provides a potential application for optical signal enhancement and strong light-matter interaction.
ABSTRACT
[This corrects the article DOI: 10.1039/D1NA00777G.].
ABSTRACT
Oxide-supported Ag nanoparticles have been widely reported as a good approach to improve the stability and reduce the cost of photocatalysts. In this work, a Ag-nanoparticles-doped porous ZnO photocatalyst was prepared by using metal-organic frameworks as a sacrificial precursor and the catalytic activity over 4-nitrophenol was determined. The Ag-nanoparticles-doped porous ZnO heterostructure was evaluated by UV, XRD, and FETEM, and the catalytic rate constant was calculated by the change in absorbance value at 400 nm of 4-nitrophenol. The photocatalyst with a heterogeneous structure is visible, light-responsive, and beneficial to accelerating the catalytic rate. Under visible light irradiation, the heterostructure showed excellent catalytic activity over 4-nitrophenol due to the hot electrons induced by the localized surface plasmon resonance of Ag nanoparticles. Additionally, the catalytic rates of 4 nm/30 nm Ag nanoparticles and porous/nonporous ZnO were compared. We found that the as-prepared Ag-nanoparticles-doped porous ZnO heterostructure catalyst showed enhanced catalytic performance due to the synergetic effect of Ag nanoparticles and porous ZnO. This study provides a novel heterostructure photocatalyst with potential applications in solar energy and pollutant disposal.
ABSTRACT
The metallic Janus nanoparticle is an emerging plasmonic nanostructure that has attracted attention in the fields of materials science and nanophotonics. The instability of the Cu nanostructure leads to very complex nucleation and growth kinetics, and synthesis of Cu Janus nanoparticle has challenges. Here, we report a new method for synthesis of Au-Cu Janus nanojellyfish (JNF) by using twinned tips of Au nanoflower (NF) as seeds. The twinned nanotip of the Au NF and the large lattice mismatch between Au and Cu can induce formation of twin defects during the growth process, resulting in asymmetric deposition of Cu atoms. The symmetry-breaking using different sizes of Au NF and Cu nanodomains within the Au-Cu JNF can controllably change the localized surface plasmon resonance (LSPR) modes. The asymmetric Au-Cu JNF can induce plasmon coupling between dipolar and multipolar modes, which leads to clear electric-field enhancement in the near-infrared region. An Au-Cu JNF with multiple LSPR modes was chosen to simultaneously match the excitation and emission bands of the lanthanide-doped upconversion nanoparticles (UCNPs). A 5000-fold enhancement of the upconversion luminescence was achieved by using single plasmonic Au-Cu JNF. The Au-Cu JNF can also provide a guide for new metallic Janus nanoparticles in the fields of plasmonic, photothermal conversion, and nanomotors.
ABSTRACT
Plasmonic nanostructures with sharp tips are widely used for optical signal enhancement because of their strong light-confining abilities. These structures have a wide range of potential applications, for example, in sensing, bioimaging, and surface-enhanced Raman scattering. Au nanoparticles, which are important plasmonic materials with high photothermal conversion efficiencies in the visible to near-infrared region, have contributed greatly to the development of photothermal catalysis. However, the existing methods for synthesizing nanostructures with tips need the assistance of poly(vinylpyrrolidone), thiols, or biomolecules. This greatly hinders signal detection because of stubborn residues. Here, we propose an efficient binary surfactant-mediated method for controlling nanotip growth on Au nanoparticle surfaces. This avoids the effects of surfactants and can be used with other Au nanostructures. The Au architecture tip growth process can be controlled well by adjusting the ratio of hexadecyltrimethylammonium bromide to hexadecyltrimethylammonium chloride. This is due to the different levels of attraction between Br-/Cl- and Au3+ ions. The surface-enhanced Raman scattering and catalytic abilities of the synthesized nanoparticles with tips were evaluated by electromagnetic simulation and photothermal catalysis experiments (with 4-nitrothiophenol). The results show good potential for use in surface-enhanced Raman scattering applications. This method provides a new strategy for designing plasmonic photothermal nanostructures for chemical and biological applications.
ABSTRACT
Surface modified NaYF4:Yb3+/Er3+/Zn2+ upconversion nanoparticles were obtained by using branched polyethylenimine (PEI). Strong fluorescence emission was observed and the influence of copper ions on the fluorescence emission of the PEI-modified NaYF4:Yb3+/Er3+/Zn2+ nanoparticles was investigated. It was found that the fluorescence emission can be quenched through luminescence resonance energy transfer from the particle to the copper ions. The results show that the PEI modified NaYF4:Yb3+/Er3+/Zn2+ nanoparticle can be used as a fluorescent probe for highly sensitive and selective detection of copper ions.
