Efficient saccharification of wheat straw pretreated by solid particle-assisted ball milling with waste washing liquor recycling.

Wheat straw was pretreated using ball milling (BM) promoted by solid particles (NaOH, NaCl, citric acid). NaOH showed the best synergistic interaction effect, due to the breakage of ß-1,4-glycosidic bonds among cellulose molecules by the alkali solid particles induced by BM. NaOH-BM pretreatment decreased the straw crystallinity from 46% to 21.4% and its average particle size from 398.3 to 50.6 µm in 1 h. After 4 h milling, the reducing-end concentration of cellulose increased by 3.8 times from 12.5 to 60.2 µM, with glucose yield increased by 2.1 times from 26.6% to 82.4% for 72 h enzymatic hydrolysis at cellulase loading of 15 FPU/g dry substrate. The pretreatment washing liquor was recycled for the re-treatment of partially pretreated biomass at 121 °C for 30 min, resulting in 99.4% glucose yield by enzymatic hydrolysis. BM assisted with alkali particles was an effective approach for improving biomass enzymatic saccharification.

High-concentrated substrate enzymatic hydrolysis of pretreated rice straw with glycerol and aluminum chloride at low cellulase loadings.

Rice straw was pretreated with glycerol and AlCl3 for enzymatic hydrolysis at low cellulase loadings. Based on a central composite design, 83% delignification, 94% hemicellulose removal, and 92% cellulose recovery (or 76% cellulose in solid residue) were achieved under the optimized pretreatment conditions (0.08 mol/L AlCl3 as catalyst at 146.8 °C for 20 min with 90% glycerol). During glycerol-AlCl3 pretreatment, the lignin-carbohydrate complex was depolymerized, resulting in the complex and recalcitrant construction of straw effectively being destroyed. The enzyme adsorption ability of pretreated straw was 16.5 times that for the original sample. After pretreatment, glucose yield was increased by 2.4 times to 74% for 48 h. Moreover, concentrated solid (15%) with low cellulase loading (3.3 FPU/g dry substrate) achieved 58.6% glucose yield, and further increased by 12% to 65.7% by adding Tween 80. Glycerol-AlCl3 pretreatment was a promising approach to realize high-concentrated solid hydrolysis for sugars at low cellulase loadings.

Complete recovery of cellulose from rice straw pretreated with ethylene glycol and aluminum chloride for enzymatic hydrolysis.

Rice straw was pretreated with ethylene glycol (EG) and AlCl3 for enzymatic hydrolysis. EG-AlCl3 pretreatment had an extremely good selectivity for component fractionation, resulting in 88% delignification and 90% hemicellulose removal, with 100% cellulose recovered or 76% (w/w) cellulose content in solid residue at 150 °C with 0.055 mol/L AlCl3. The pretreated residue (5%, w/v) presented a higher enzymatic hydrolysis rate (glucose yield increased 2 times to 94%) for 24 h at cellulase loading of 10 FPU/g. The hydrolysis behavior was correlated with the composition and structure of substrates characterized by SEM, FT-IR, BET, XRD and TGA. The enzyme adsorption ability of pretreated straw was 12-folds that for the original sample. EG-AlCl3 solution was further cycled for 3 times with 100% cellulose recovery but only 29% lignin removal due to the loss of AlCl3. EG-AlCl3 pretreatment is an efficient method with little loss of cellulose for lignocelluloses.