Strategic Realignment in Healthcare Simulation Education: Shifting Focus From Assistants to Technician Training Pathways.

Simulation is vital for healthcare training, yet workforce challenges persist. This article details the development of an undergraduate minor program to address these issues and enhance simulation education. Initially conceived for simulation assistants, the program shifted focus to training simulation technicians. Informed by industry insights, the curriculum aligns with accreditation standards, emphasizing practical knowledge. Integrated knowledge translation (iKT) fosters collaboration, ensuring program relevance. Stakeholder feedback guided program refinement, addressing concerns of role delineation and alignment with certification frameworks. The program's evolution involved enhancing competency frameworks, validation through surveys, and forming partnerships for practical training. A certification committee ensures ongoing alignment with industry standards. This collaborative effort aims to produce graduates prepared for the dynamic field of healthcare simulation technology, thereby improving patient outcomes and advancing simulation education.

Adapting the Gamified Educational Networking Online Learning Management System to Test a Decentralized Simulation-Based Education Model to Instruct Paramedics-in-Training on the Emergency Intraosseous Access and Infusion Skill.

Intraosseous (IO) access and infusion is a safe and rapid alternative to intravenous access in obtaining vascular access for administering fluids and drugs. Healthcare professionals, such as primary and advanced care paramedics, use IO access and infusion in emergency circumstances where peripheral intravenous routes are inaccessible. IO access skills require hands-on training, which can be done remotely if the participants have access to simulation, instructions, guidance, and feedback. For the purpose of moving the training outside of the simulation laboratories, we have developed (1) an inexpensive and scalable three-dimensional (3D) printed and silicone-based advanced adult proximal tibial IO access and infusion simulator and (2) a unique learning management system (LMS) for remote simulation-based training. The LMS was built using the Django platform and supports experiential learning by providing access to educational and instructional content (including virtual simulation and serious games), allowing peers to communicate among themselves and with subject-matter experts, provide and receive feedback asynchronously, and engage in learning using gamification elements. The aim of this technical report is to describe the process of development and the final product of the LMS as a research and educational tool to scaffold remote learning of emergency IO skills by paramedics-in-training.

The Iterative Design and Development of an Affordable Ultrasound Simulator.

Simulation-based medical education (SBME) offers a secure and controlled environment for training in ultrasound-related clinical skills such as nerve blocking and intravenous cannulation. Sonographer training for point-of-care ultrasound often adopts the train-the-trainer (TTT) model, wherein a select group of sonographers receive on-site training to subsequently instruct others. This model traditionally relies on expensive commercial ultrasound simulators, which presents a barrier to the scale-up of the TTT model. This study aims to address the need for cost-effective ultrasound simulators suitable for both initial and cascaded TTT. The objective of this report is to present the design and development of an affordable ultrasound simulator, which mimics anatomical features under ultrasound. The simulator was created using additive manufacturing techniques, including 3D printing, ballistic gel, and silicone work. We report on three development-feedback iterations, with feedback provided by an experienced sonographer from FUJIFILM Sonosite Canada Inc. using the think-aloud approach. Overall the results indicate that de-gassed silicone may serve as a good medium; vessels are best produced as hollow canals within the de-gassed silicone; 3D-printed bones cast acoustic shadows, which are reduced by increasing rigidity of the structures, and 3D printing filament and silicone can be used for nerve bundles. Future developments will focus on achieving anatomical accuracy, exploring alternative materials and printing parameters for the bones, and analyzing embedded structures at varying depths within the silicone. The next steps involve integrating the simulator into ultrasound curricula for a formal assessment of its effectiveness as a training tool.

The Perceived Effectiveness of Various Forms of Feedback on the Acquisition of Technical Skills by Advanced Learners in Simulation-Based Health Professions Education.

Simulation-based health professions education (SBHPE) is a valuable approach for healthcare professionals to develop and refine technical skills in a safe environment. Feedback plays a crucial role in the acquisition of these skills, but little research has explored the effectiveness of augmented (knowledge of results (KR) and knowledge of performance (KP) versus intrinsic feedback types for advanced learners. Therefore, this study aimed to determine what type of feedback is perceived to be most effective by advanced learners when acquiring complex technical skills in SBHPE. The study followed the test and evaluated phases of the design-based research (DBR) framework. A total of 23 advanced care paramedics (ACPs) participated in the study and received feedback in the form of KR, KP, and intrinsic feedback while using the intraosseous (IO) access simulator. Participants completed a survey to evaluate their learning experience and rank the perceived effectiveness of each feedback type. The results of this study indicated that KP was perceived as the most effective type of feedback and KR was perceived as the least effective feedback, with intrinsic feedback being in the middle. This work provides insights into the use of augmented and intrinsic feedback for advanced learners in an SBHPE environment, but future work to assess the actual learning effects of these types of feedback is needed.

Defining the Nature of Augmented Feedback for Learning Intraosseous Access Skills in Simulation-Based Health Professions Education.

In the field of health professions education, acquiring technical skills involves three stages: 1) receiving instructions, 2) engaging in practice, and 3) receiving feedback. Simulation serves as a valuable tool that encompasses all three stages, enhancing the effectiveness of health professions education. This work focuses on feedback, which can be categorized as intrinsic (perceived by the learner through their senses) or augmented (provided by an external perspective). Augmented feedback can take the form of knowledge of results (information regarding the outcome) or knowledge of performance (information about the actions leading to the outcome). The overall objective of this work was to evaluate the perceived efficacy of these types of feedback in learning technical skills using a simulation, specifically an intraosseous access simulator, among advanced care paramedics. The primary focus of this article and the initial step towards achieving the aforementioned objective of this work was to determine the possible knowledge of results and knowledge of performance that paramedic facilitators could offer to advanced care paramedics during the use of an existing intraosseous access simulator. This research was conducted following the design-based research framework, employing a combination of design thinking and Delphi methods to generate a comprehensive list of augmented feedback, in both the form of knowledge of results and knowledge of performance, that can be provided to advanced care paramedics while learning intraosseous access skills through a simulator. The design thinking session was carried out to generate an initial inventory of augmented feedback, which was then refined through two rounds of Delphi consensus-building with paramedic experts. This process resulted in an eight-step list of feedback for knowledge of results and knowledge of performance that can be delivered to advanced care paramedics by paramedic facilitators using an intraosseous access simulator.

Maternal and co-parental experiences and satisfaction with a co-parenting breastfeeding eHealth intervention in Canada.

BACKGROUND: Suboptimal breastfeeding rates are a public health priority. Interventions that include both breastfeeding women and their co-parents can increase breastfeeding initiation, duration, and exclusivity. eHealth can be an effective means of designing such interventions, as parents increasingly use the internet to access health information. The objective of this study was to determine maternal and co-parent satisfaction with an eHealth intervention. METHODS: The study was part of a larger randomized controlled trial that took place in Canada between March 2018 and April 2020. Data was collected from mothers (n = 56) and co-parents (n = 47). INTERVENTION: The eHealth intervention group received: 1) continued access to an eHealth breastfeeding co-parenting resource from the prenatal period to 52 weeks postpartum; 2) a virtual meeting with a research assistant; and 3) 6 weekly emails reminders. Follow-up data were collected via online questionnaires completed at 2 weeks post enrollment and 4, 12, 26, and 52 weeks postpartum to determine use and satisfaction with the intervention components. FINDINGS: The majority of mothers and co-parents independently reviewed the eHealth resource (95% and 91%, respectively), with higher use in the prenatal period. Participants found the resource to be useful (92%), informative (93%), targeted both parents (90%), and easy to understand (97%). Participants indicated the resource was comprehensive, easily navigated, convenient, and engaging. APPLICATION TO PRACTICE: Providing mothers and their co-parents with breastfeeding co-parenting support via an eHealth intervention delivers accessible, comprehensive information which may assist them in meeting their breastfeeding goals.

Empowering Non-healthcare Students as Simulation Assistants in the Digital Era of Simulation-Based Healthcare Education: Bridging the Gap.

Simulation-based education plays a pivotal role in various high-stakes fields, notably in healthcare, where simulation technicians are crucial for the effective operation of simulation technology. Currently, these roles are often filled by healthcare professionals who transition from patient care, exacerbating shortages in the healthcare workforce. This editorial addresses the current gap by proposing an alternative solution, creating educational pathways for undergraduate students in science and health science programs to become "simulation assistants". Leveraging their foundational knowledge in biological and physical sciences, research skills, and attributes developed through health sciences programs, these students could support simulation activities while entering an ever-evolving field with copious growth opportunities. Paralleling the historical development of medical laboratory sciences, which saw the creation of distinct roles for technologists and assistants, the editorial suggests a collaborative model wherein simulation technicians and assistants work together to enhance simulation-based education in the healthcare sector. This paradigm shift has the potential to alleviate the growing healthcare personnel shortages. While acknowledging the challenges, the editorial envisions the transformative impact of integrating simulation assistants into the healthcare workforce, echoing the historical evolution of specialized roles in response to the changing demands of healthcare.

Hacking Intraosseous Infusion Skills Training With 3D Printing: maxSIMIO Drilling System.

Intraosseous (IO) infusion is an alternative way to access the vascular system to administer drugs and fluids, which is particularly helpful when the commonly used peripheral intravenous route is inaccessible. The IO procedure can be done using a drill that involves disinfecting the area, landmarking the insertion point, seating the needle in a firm and stable position in the bone, and then delivering a smooth fluid flush. However, in the current medical training landscape, access to commercially available IO drills such as the Arrow® EZ-IO® Power Driver (EZ-IO; Teleflex, Morrisville, North Carolina, United States) is difficult, especially for rural and remote areas, due to the high costs. Furthermore, the EZ-IO is not rechargeable and does not clearly indicate the remaining battery life, which could potentially put patients at risk during the IO procedure. This technical report aims to address these concerns by describing the development of an alternative, affordable, and reliable IO drilling system for training use: the maxSIMIO Drilling System. This system consists of a cordless and rechargeable IKEA screwdriver which connects to a conventional, hexagon-shaped 3D-printed drill bit needle adapter. Two needle adapters were created: Version A was designed to use a friction-based mechanism to couple the screwdriver with the EZ-IO training needle, while Version B relies on a magnetic mechanism. The major differences between the EZ-IO and the screwdriver are that a) the EZ-IO has only one rotation to advance the cannula while the screwdriver features both directions, b) the EZ-IO is not rechargeable while the screwdriver is, and c) the EZ-IO has a custom needle holder that can fit any EZ-IO training needle size while the screwdriver needs to have a custom needle adapter made to connect to the EZ-IO training needle. Overall, through this exploration, the features of the maxSIMIO Drilling System in comparison to the EZ-IO appear more accessible for IO training. Future considerations for this development include gathering clinical expertise through rigorous testing of this novel system.

Development of Simple and Advanced Adult Proximal Tibia Simulators for a Decentralized Simulation-Based Education Model to Teach Paramedics-in-Training the Intraosseous Infusion Procedure.

Introduction During the COVID-19 pandemic, public health had advised practicing social distancing which led to the temporary shutdown of simulation laboratories or centralized simulation-based education model, shared spaces that healthcare workers such as paramedics use to train on important hands-on clinical skills for the job. One such skill is intraosseous (IO) access and infusion, the delivery of fluids and medication through the marrow or medullary cavity of the bone which provides fast and direct entry into the central venous system. This skill is critical in emergencies when peripheral access is not immediately available. To continue the training of paramedics in life-saving skills like IO infusion in the post-pandemic era, a decentralized simulation-based education (De-SBE) model was proposed. The De-SBE relies on the availability of inexpensive and flexible simulators that can be used by learners outside of the simulation laboratory. However, to date, there is a paucity of simulation design methods that stimulate creativity and ideation, and at the same time, provide evidence of validity for these simulators. Our exploratory research aimed to test a novel approach that combines components of development-related constraints, ideation, and consensus (CIC) approach to develop and provide content validity for simulators to be used in a De-SBE model. Materials and methods The development of the IO simulators was constrained to follow a design-to-cost approach. First, a modified design thinking session was conducted with three informants from paramedicine and medicine to gather ideas for the development of two IO simulators (simple and advanced). Next, to sort through, refine, and generate early evidence of the content validity of the simulators, the initial ideas were integrated into a two-round, modified Delphi process driven by seven informants from paramedicine and medicine. In addition, we surveyed the participants on how well they liked the CIC approach. Results The CIC approach generated a list of mandatory and optional features that could be added to the IO simulators. Specifically, six features (one mandatory and four optional) for the existing simple IO simulator and eight (three mandatories and five optional) for the advanced IO simulators were identified. Following a design-to-cost approach, the features classified as mandatory for the simple and advanced IO simulators were integrated into the final designs to maintain the feasibility of production for training purposes. The surveys with the participants showed that the CIC approach worked well in the group setting by allowing for various perspectives to be shared freely and ending with a list of features for IO simulator designs that could be used in the future. Some improvements to the approach included flagging for potential users to determine what works best concerning the mode of delivery (online or in person), and duration of the stages to allow for more idea generation.  Conclusion The CIC approach led to the manufacturing of simple and advanced IO simulators that would suit a training plan catered to teach the IO access and infusion procedure decentrally to paramedics-in-training. Specifically, they have been designed in a manner that allows them to be made easily accessible to the trainees i.e., low costs and high mobility, and work cohesively with online learning management systems which further facilitates the use of a De-SBE model.

Development and Initial Assessment of a Novel and Customized Bile Duct Simulator for Handsewn Anastomosis Training.

Simulation-based medical education allows for the training and maintenance of healthcare skills in a safe and controlled environment. In this technical report, the development and initial evaluation of a bile duct anastomosis simulator are described. The simulator was developed using additive manufacturing techniques such as three-dimensional (3D) printing and silicone work. The final product was produced by maxSIMhealth, a research lab at Ontario Tech University (Oshawa, ON, Canada), and included four individual silicone bile ducts, based on the expert opinions from surgeons at the Centre Hospitalier de l'Université de Montréal (Montreal, QC, Canada), and a 3D-printed maxSIMclamp, which was described in a previous report. The evaluation was conducted by nine individuals consisting of surgeons, surgical residents, and medical students to assess the fidelity, functionality, and teaching quality of the simulator. The results from the evaluation indicate that the simulator needs to improve its fidelity by being softer, thinner, and beige. On the other hand, the results also indicate that this simulator is extremely durable and can be used as a training tool for surgical residents with some minor improvements.

Hands-On Practice on Sustainable Simulators in the Context of Training for Rural and Remote Practice Through a Fundamental Skills Workshop.

Simulation-based education (SBE) is a sustainable method to allow healthcare professionals to develop competencies in clinical skills that can be difficult to maintain in rural and remote settings. Simulation-based skills training is necessary for healthcare professionals that experience difficulties accessing skills development and maintenance courses to address the needs of rural communities. However, simulators, a key element of simulation, are often prohibitively expensive and follow a "one-size-fits-all" approach. Using additive manufacturing (AM) techniques, more specifically three-dimensional (3D) printing, to produce inexpensive yet functional and customizable simulators is an ideal solution for learners to practice and improve their procedural skills anywhere and anytime. AM allows for the customization of simulators to fit any context while reducing costs and is an economic solution that moves away from the use of animal products to a more ethical, sustainable method for training. This technical report describes the delivery of a fundamental skills workshop to provide hands-on training to rural and remote healthcare professionals using 3D-printed simulators purposefully designed following design-to-cost principles. The workshop was delivered at a three-hour session hosted at a rural and remote medicine course in Ottawa, Canada. The workshop consisted of four technical skills: suturing, cricothyrotomy, episiotomy, and intraosseous infusion (tibial) (IO) and used a blended learning approach to train healthcare professionals and trainees who practice in rural and remote areas. In addition, the learners were granted access to a custom-designed learning management system, which provided a repository of instructional materials, and enabled them to record and upload personal practice sessions, review other learners' practice sessions, collaborate, and provide feedback to other learners. The feedback collected from participants, instructors, and observations on the delivery of the workshop will help improve the structure and training provided to learners. The delivery of this workshop annually is an ideal solution to ensure parsimonious delivery of simulation training for rural and remote healthcare professionals.

From Centralized to Decentralized Model of Simulation-Based Education: Curricular Integration of Take-Home Simulators in Nursing Education.

In a centralized model of simulation-based education (Ce-SBE), students practice skills in simulation laboratories, while in a decentralized model (De-SBE), they practice skills outside of these laboratories. The cost of "take-home" simulators is a barrier that can be overcome with additive manufacturing (AM). Our objective was to develop and evaluate the quality of education when year one nursing students practiced clinical skills from home following normal curricular activities but in the De-SBE format. A group of expert educators, designers, and researchers followed a two-cycle, iterative design-to-cost approach to develop three simulators: wound care and urethral catheterization (male and female). The total cost of manufacturing all three simulators was USD 5,000. These were sent to all year one nursing students who followed an online curriculum. Twenty-nine students completed the survey, which indicated that the simulators supported the students' learning needs, and several changes were requested to improve the educational value. The results indicate that substituting traditional simulators with AM-simulators provided an acceptable alternative for nursing students to learn wound care and urethral catheterization off-campus in De-SBE. The feedback also provided suggestions to improve each of the simulators to make the experience more authentic.

Application of 3D Printing in Training Health Care Providers; the Development of Diverse Facial Overlays for Simulation-Based Medical Training.

The medical simulation manikins used by healthcare learners provide the training of numerous clinical skills but often lack diversity with respect to race, ethnicity, age, and sex. Having a diverse medical education environment is imperative for exposing learners to the diverse population of patients they may encounter when in practice. In this technical report, the development of diverse and cost-effective facial overlays produced using 3D scanning, 3D printing, and silicone to be used on top of the current medical manikins at Lakeridge Health Hospital (Oshawa, Ontario, Canada) is described. To obtain consistent feedback throughout the development process, an advisory committee was consulted monthly at Lakeridge Health Hospital. The process began by determining that two facial overlays would be developed based on the two groups that represent the highest percentage of visible minorities in the Durham Region (Ontario, Canada). Facial overlays representing the South Asian (31.8%) and Black (29.6%) races were chosen. To prevent the generalizability of the facial features of these two races, volunteers who identified as specific ethnicities (East Indian and Jamaican) within each race were selected. To add variation in age for the facial overlays, the East Indian facial overlay was edited to represent an adolescent teenager (15 to 17 years old) and the Jamaican overlay was edited to represent an elderly citizen (over 60 years old). The facial overlays were developed from the 3D scans of the two volunteers and were used to create the design of 3D printed molds, in which silicone was poured in. Pigments were added to the silicone to match the skin tones of the two volunteers, and these specific tones were used as the base color for each facial overlay. Details, such as wrinkles, eyebrows, and lip color, were painted on top of the base using additional pigmented silicone. Additionally, neck overlays were created to provide continuity of the skin tone of the facial overlay. To retain the functionality of the medical manikins, the eyes of the facial overlays were cut out, and the mouth was cut open to allow for intubation training. For stability purposes, Velcro attachments were added to the facial and neck overlays so that they could be secured onto the medical manikins. Overall, the costs to manufacture both facial overlays resulted in CAD 235.65, including local taxes. Once manufactured, both facial overlays were tested by medical students (n=18) during two separate advanced cardiovascular life support (ACLS) training sessions in the local, hospital-based simulation laboratory at Lakeridge Health Hospital. The feedback obtained suggested a need to improve the functionality of the facial overlays by making the mouths bigger and less stiff for easier intubation. However, the overlays were accepted overall as a means to add diversity to the current medical manikins. In the end, cost-effective and diverse facial overlays were created to be used on top of the medical manikins that are currently being used by healthcare learners at Lakeridge Health Hospital.

The Development and Initial End-Point User Feedback of a 3D-Printed Adult Proximal Tibia IO Simulator.

Intraosseous infusion (IO) remains an underutilized technique for obtaining vascular access in adults, despite its potentially life-saving benefits in trauma patients. In rural and remote areas, shortage of training equipment and human capacity (i.e., simulators) are the main contributors to the shortage of local training courses aiming at the development and maintenance of IO skills. Specifically, current training equipment options available for trainees include commercially available simulators, which are often expensive, or animal tissues, which lack human anatomical features that are necessary for optimal learning and pose logistical and ethical issues related to practice on live animals. Three-dimensional (3D) printing provides the means to create cost-effective, anatomically correct simulators for practicing IO where existing simulators may be difficult to access, especially in remote areas. This technical report aims to describe the development of maxSIMIO, a 3D-printed adult proximal tibia IO simulator, and present feedback on the design features from a clinical co-design team consisting of 18 end-point users.  Overall, the majority of the feedback was positive and highlighted that the maxSIMIO simulator was helpful for learning and developing the IO technique. The majority of the clinical team responders also agreed that the simulator was more anatomically accurate compared to other simulators they have used in the past. Finally, the survey results indicated that on average, the simulator is acceptable as a training tool. Notable suggestions for improvement included increasing the stability of the individual parts of the model (such as tightening the skin and securing the bones), enhancing the anatomical accuracy of the experience (such as adding a fibula), making the bones harder, increasing the size of the patella, making it more modular (to minimize costs related to maintenance), and improving the anatomical positioning of the knee joint (i.e., slightly bent in the knee joint). In summary, the clinical team, located in rural and remote areas in Canada, found the 3D-printed simulator to be a functional tool for practicing the intraosseous technique. The outcome of this report supports the use of this cost-effective simulator for simulation-based medical education for remote and rural areas anywhere in the world.

Development and Initial Assessment of a Novel Customized Deep Laceration Simulator for Suturing Training.

Suturing of different layers, such as deep lacerations, is a challenging clinical skill for residents. Currently, there is a lack of general suturing instructions and practice in undergraduate medicine curricula which would add to the education required during residency and could be impactful to patient safety. Therefore, in order to adequately prepare trainees for clinical practice, training in suturing needs to be made more robust and executable. One way to facilitate this is to provide easy access to equipment that can offer good educational value while allowing for adequate repetition of suturing deep lacerations outside of clinical settings, similar to how it has been done for superficial lacerations. Simulation-based medical education addresses this by training residents in healthcare skills in a safe and controlled environment. Our technical report aims to describe the development and initial evaluation of a deep laceration simulator designed to train residents in suturing. The simulator was made using additive manufacturing techniques such as three-dimensional printing and silicone. Feedback on the simulator was provided by Centre Hospitalier de l'Université de Montréal clinicians from various specialties and residents. The simulator was assessed mainly as being easy to use, durable, and having anatomically accurate characteristics. The main improvements suggested were to make the skin thinner, divide the epidermis and dermis, add a fascia, and create a looser and friable layer of fat. Overall, the respondents rated the simulator as a good educational tool with a few minor adjustments.

Design of an Intramuscular Injection Simulator: Accommodating Cultural Differences.

We had developed an inexpensive intramuscular (IM) injection simulator and gathered feedback from Canadian hospital-based practicing nurses about the design features of the simulator. While the feedback critiqued the density of the simulator as being too stiff and suggested making the shape more realistic, it was also unanimously agreed that this IM injection simulator is more realistic than any other previous models they have used, therefore deeming it an acceptable training tool for nursing students in Canada. For this simulator to serve as a training tool in other countries, such as Singapore, we partnered with SingHealth, a hospital network in Singapore, to conduct identical product testing in a different ethnic context and compare the data to our previous work. This article is based on this study. We had 21 nurses from Singapore General Hospital test the IM injection simulator and fill out the same survey the Canadian nurses had done. With a 100% response rate, only 26% of the Singapore hospital-based nurses agreed that this IM injection simulator is a more ethnically appropriate representation of anatomy than previous simulators they have used. There were numerous other differences in feedback compared to the Canadian nurses, such as the fat layer being too thick. These differences in feedback highlight the importance of including ethnicity as a factor during the design of simulators. Therefore, despite the silicone IM injection simulator being a cost-effective solution to practice IM injections, the features of the simulator need to be improved to make it a valuable teaching tool for nursing students, especially those in Singapore.

The Development of a Cost-Effective Infant Intraosseous Infusion Simulator for Neonatal Resuscitation Program Training.

Simulation-based medical education (SBME) employs realistic simulators to allow physicians and medical students to learn and practice high acuity, low occurrence (HALO) skills such as the intraosseous (IO) infusion. Previous research was done to develop and evaluate a three-dimensional (3D)-printed adult proximal tibia IO simulator and was rated as a valuable and realistic medical education training tool. This report focuses on implementing this IO simulator for neonatal resuscitation program (NRP) training purposes, as well as to explain the process of redeveloping the previous adult IO simulator and the development of a stand, called the maxSIMbox, to hold the simulators, as well as the tools needed to perform an IO infusion. The feedback provided from stakeholders was helpful, with an emphasis on providing stability to both the infant IO simulator and the maxSIMbox. From this feedback, a functional and cost-effective simulator was developed to practice this HALO skill and is currently being used for NRP training.

The Development of an Intramuscular Injection Simulation for Nursing Students.

Intramuscular (IM) injections are preferred over subcutaneous injections for administering medicine such as epinephrine and vaccines as the muscle tissue contains an increased vascular supply that provides ideal absorption of the drug being administered. However, administering an IM injection requires clinical judgment when choosing the injection site, understanding the relevant anatomy and physiology as well as the principles and techniques for administering an IM injection. Therefore, it is essential to learn and perform IM injections using injection simulators to practice the skill before administering to a real patient. Current IM injection simulators either favor realism at the expense of standardization or are expensive but do not provide a realistic experience. Therefore, it is imperative to develop an inexpensive but realistic intramuscular injection simulator that can be used to train nursing students so that they can be prepared for when they enter the clinical setting. This technical report aims to provide an overview of the development of an inexpensive and realistic deltoid simulator geared to teach nursing students the skill of IM injections. After development, the IM simulators were tested and validated by practicing nurses. An 18-item survey was administered to the nurses, and results indicated positive feedback about the realism of the simulator, in comparison to previous models used, such as the Wallcur® PRACTI-Injecta Pads (Wallcur LLC, San Diego, CA). Feedback to improve the density of the simulator as well as the shape and size to make it a more realistic experience was provided.