Abnormal gait pattern in downhill hiking is related to muscular deficits of the knee flexors and extensors in active patients with total knee arthroplasty.

BACKGROUND: To assess the in-field walking mechanics during downhill hiking of patients with total knee arthroplasty five to 14 months after surgery and an age-matched healthy control group and relate them to the knee flexor and extensor muscle strength. METHODS: Participants walked on a predetermined hiking trail at a self-selected, comfortable pace wearing an inertial sensor system for recording the whole-body 3D kinematics. Sagittal plane hip, knee, and ankle joint angles were evaluated over the gait cycle at level walking and two different negative slopes. The concentric and eccentric lower extremity muscle strength of the knee flexors and extensors isokinetically at 50 and 120°/s were measured. FINDINGS: Less knee flexion angles during stance have been measured in patients in the operated limb compared to healthy controls in all conditions (level walking, moderate downhill, steep downhill). The differences increased with steepness. Muscle strength was lower in patients for both muscle groups and all measured conditions. The functional hamstrings to quadriceps ratio at 120°/sec correlated with knee angle during level and downhill walking at the moderate slope in patients, showing higher ratios with lower peak knee flexion angles. INTERPRETATION: The study shows that even if rehabilitation has been completed successfully and complication-free, five to 14 months after surgery, the muscular condition was still insufficient to display a normal gait pattern during downhill hiking. The muscle balance between quadriceps and hamstring muscles seems related to the persistence of a stiff knee gait pattern after knee arthroplasty. LoE: III.

Influence of different CCD angles on osseointegration and radiological changes after total hip arthroplasty of a triple wedge shape cementless femoral stem: a prospective cohort study.

PURPOSE: The purpose of this study was to evaluate the osseointegration and radiological outcomes in patients after total hip arthroplasty, hypothesizing different load patterns with one cementless stem design and different CCD angles (CLS Spotorno femoral stem 125° vs 135°). METHODS: All cases of degenerative hip osteoarthritis fulfilling strict inclusion criteria were treated with cementless hip arthroplasty between 2008 and 2017. Ninety-two out of one hundred six cases were clinically and radiologically examined three and 12 months after implantation. Two groups with each 46 patients were rendered prospectively and compared in clinical (Harris Hip Score) and radiological outcome. RESULTS: At final follow-up, no significant difference regarding Harris Hip Score was detected between the two groups (mean 99.2 ± 3.7 vs. 99.3 ± 2.5; p = 0.73). Cortical hypertrophy was found in none of the patients. Stress shielding was seen in a total of 52 hips (n = 27 vs. n = 25; 57% of the 92 hips). No significant difference regarding stress shielding was detected when comparing both groups (p = 0.67). Significant bone density loss was detected in Gruen zone one and two in the 125° group. The 135° group showed significant radiolucency in Gruen zone seven. No overall radiological loosening or subsidence of the femoral component was observed. CONCLUSION: According to our results, the use of a femoral component with a 125° CCD angle versus a 135° CCD did not result in a different osseointegration and load transfer with a clinically relevant significance.

Impact of keel saw blade design and thickness on the incidence of tibial plateau fracture and tibial implant-loosening in cementless medial UKR.

BACKGROUND: Tibial plateau fractures and tibial implant- loosening are severe complications in cementless unicompartmental knee replacement (UKR). The tibial keel preparation is particularly demanding and different saw blades can be used. It was hypothesized that different blade designs and thickness have an influence on the frequency of tibial plateau fractures and implant-loosening in cementless medial UKR. METHODS: 1258 patients with cementless medial UKR were included in this retrospective study between 2013 and 2020. The tibial keel cut was performed either with a double keel saw blade (DKS; 2.8 mm) and added hand guided pick or a mono reciprocating saw blade (RKB) of different thickness (2.5 mm; 2.65 mm; 2.75 mm). Tibial plateau fracture and loosening were demonstrated by standard two-plane radiographs. Tibial implant-loosening was defined as complete radiolucency and implant migration. Fracture and loosening were combined with pain and loss of function. RESULTS: In 126 patients (10%) the tibial keel was prepared with DKS, in 407 patients (32.4%) with RKB 2.5 mm, in 330 patients (26.2%) with RKB 2.65 mm and in 395 patients (31.4%) with 2.75 mm. In 4 patients (3.17%) with DKS tibial plateau fracture occurred, in 4 patients (0.99%) with 2.5 mm RKB, in 3 patients (0.92%) with 2.65 mm RKB and in 1 patient (0.25%) with 2.75 mm RKB. Significantly fewer fractures occurred with a RKB design (p = 0.007). A negative correlation between fracture incidence and RKB saw blade thickness was found (Spearman-r = - 0.93). No difference for tibial implant-loosening was shown (p = 0.51). CONCLUSION: Different blade designs and thickness have a significant influence on the incidence of tibial plateau fractures and aseptic tibial implant-loosening. The incidence of tibial plateau fractures in cementless medial UKR can be reduced by changing the design and thickness of the tibial keel saw blade. Greater thickness of RKB leads to significantly fewer tibial plateau fractures while the incidence of implant-loosening is not increasing. TRIAL REGISTRATION: This study was retrospectively registered and ethical approval was waived by the local ethical committee (No. 2020-1174).

Implantation Accuracy of a Lateral Unicompartmental Knee Arthroplasty: A Hoffa´s Fat Pad-Preserving Medial Approach Versus the Transpatellar Lateral Approach.

BACKGROUND: A small proportion of patients suffer from isolated lateral osteoarthritis where the sole lateral unicompartmental knee arthroplasty (UKA) is a possible treatment option. There, both a medial and a lateral surgical approach can be considered. This study should answer the question whether the lateral approach is superior to a modified medial approach in terms of implantation accuracy and subjective outcome. METHODS: In this retrospective study, 175 patients with lateral UKA were included between 2015 and 2020. In 82 patients, the lateral approach was used, and in 93 patients, the medial approach was used. To assess implantation accuracy, different imaging criteria on postoperative radiographs were analyzed. Postoperative patient-related outcome measurements (PROMs) (OKS, LEFS, and EQ5D) were evaluated. Statistical significance was assumed for P < .05. RESULTS: The tibial implant relation to the tibial plateau diameter in the lateral approach was significantly larger than in the medial approach (23.6% vs 22.2%; P < .001). Significantly more deviations >15° regarding flexion position of the femoral implant (P = .002) and a higher number of deviations of the slope was found (P = .06) in the lateral approach. The lateral approach showed a significantly higher rate of lateral positioning of the femoral component (P = .007). Post-PROMs showed significant improvement in both approaches. CONCLUSION: The lateral approach is not superior regarding different radiological accuracy criteria. The Hoffa´s fat pad-preserving medial approach showed good results in implantation accuracy and therefore is a good alternative to implant lateral UKA. In addition, significant improvement in PROMs could be demonstrated.

Effects of knee orthosis adjustment on biomechanical performance and clinical outcome in patients with medial knee osteoarthritis.

BACKGROUND: Valgus bracing in medial knee osteoarthritis aims to improve gait function by reducing the loading of the medial compartment. Orthosis composition and optimal adjustment is essential to achieve biomechanical and clinical effectiveness. OBJECTIVES: To investigate biomechanical functionality during gait, pain relief and compliance in patients with knee osteoarthritis using a lightweight adjustable knee unloader orthosis. STUDY DESIGN: Prospective observational clinical trial. METHODS: Instrumented gait analysis in 22 patients with unilateral medial knee osteoarthritis was performed after a 2-week orthosis acclimatisation period. Kinematics and kinetics during gait as well as force transmission from the orthosis to the knee were analysed. Measurements were performed without, at individualised and at reduced orthosis setting. The assessment was supplemented by patient-related pain sensation and compliance questionnaires. RESULTS: Orthosis wear significantly reduced the knee adduction moment by up to 20% depending on orthosis adjustment, whereas pain sensation was significantly reduced by 16%. A significant positive correlation was found between force transmissions and knee adduction moment as well as for frontal knee angle. Compliance was good with a main daily use of 2-6 h. CONCLUSION: The orthosis provides significant biomechanical improvements, pain relief and good patient compliance. Patients had a biomechanical benefit for the individualised and reduced orthosis adjustments. Clinical relevance In patients with medial knee osteoarthritis, a lightweight medial unloader orthosis effectively reduced external knee adduction moment and pain sensation during daily activities. Thus, use of lightweight orthoses effectively supports conservative treatment in medial knee osteoarthritis.