Towards continuous monitoring of TNF-α at picomolar concentrations using biosensing by particle motion.

The ability to continuously monitor cytokines is desirable for fundamental research studies and healthcare applications. Cytokine release is characterized by picomolar circulating concentrations, short half-lives, and rapid peak times. Here, we describe the characteristics and feasibility of a particle-based biosensing technique for continuous monitoring of TNF-α at picomolar concentrations. The technique is based on the optical tracking of particle motion and uses an antibody sandwich configuration. Experimental results show how the analyte concentration influences the particle diffusivity and characteristic response time of the sensor, and how the sensitivity range depends on the antibody functionalization density. Furthermore, the data clarifies how antibodies supplemented in solution can shorten the characteristic response time. Finally, we demonstrate association rate-based sensing as a first step towards continuous monitoring of picomolar TNF-α concentrations, over a period of 2 h with delay times under 15 min. The insights from this research will enable the development of continuous monitoring sensors using high-affinity binders, providing the sensitivity and speed needed in applications like cytokine monitoring.

Sandwich Immunosensor Based on Particle Motion: How Do Reactant Concentrations and Reaction Pathways Determine the Time-Dependent Response of the Sensor?

To control and optimize the speed of a molecular biosensor, it is crucial to quantify and understand the mechanisms that underlie the time-dependent response of the sensor. Here, we study how the kinetic properties of a particle-based sandwich immunosensor depend on underlying parameters, such as reactant concentrations and the size of the reaction chamber. The data of the measured sensor responses could be fitted with single-exponential curves, with characteristic response times that depend on the analyte concentration and the binder concentrations on the particle and substrate. By comparing characteristic response times at different incubation configurations, the data clarifies how two distinct reaction pathways play a role in the sandwich immunosensor, namely, analyte binding first to particles and thereafter to the substrate, and analyte binding first to the substrate and thereafter to a particle. For a concrete biosensor design, we found that the biosensor is dominated by the reaction pathway where analyte molecules bind first to the substrate and thereafter to a particle. Within this pathway, the binding of a particle to the substrate-bound analyte dominates the sensor response time. Thus, the probability of a particle interacting with the substrate was identified as the main direction to improve the speed of the biosensor while maintaining good sensitivity. We expect that the developed immunosensor and research methodology can be generally applied to understand the reaction mechanisms and optimize the kinetic properties of sandwich immunosensors with particle labels.

Glow-in-the-Dark Infectious Disease Diagnostics Using CRISPR-Cas9-Based Split Luciferase Complementation.

Nucleic acid detection methods based on CRISPR and isothermal amplification techniques show great potential for point-of-care diagnostic applications. However, most current methods rely on fluorescent or lateral flow assay readout, requiring external excitation or postamplification reaction transfer. Here, we developed a bioluminescent nucleic acid sensor (LUNAS) platform in which target dsDNA is sequence-specifically detected by a pair of dCas9-based probes mediating split NanoLuc luciferase complementation. LUNAS is easily integrated with recombinase polymerase amplification (RPA), providing attomolar sensitivity in a rapid one-pot assay. A calibrator luciferase is included for a robust ratiometric readout, enabling real-time monitoring of the RPA reaction using a simple digital camera. We designed an RT-RPA-LUNAS assay that allows SARS-CoV-2 RNA detection without the need for cumbersome RNA isolation and demonstrated its diagnostic performance for COVID-19 patient nasopharyngeal swab samples. Detection of SARS-CoV-2 from samples with viral RNA loads of ∼200 cp/µL was achieved within ∼20 min, showing that RPA-LUNAS is attractive for point-of-care infectious disease testing.

Ratiometric Bioluminescent Zinc Sensor Proteins to Quantify Serum and Intracellular Free Zn2.

Fluorescent Zn2+ sensors play a pivotal role in zinc biology, but their application in complex media such as blood serum or plate reader-based cellular assays is hampered by autofluorescence and light scattering. Bioluminescent sensor proteins provide an attractive alternative to fluorescent sensors for these applications, but the only bioluminescent sensor protein developed so far, BLZinCh, has a limited sensor response and a suboptimal Zn2+ affinity. In this work, we expanded the toolbox of bioluminescent Zn2+ sensors by developing two new sensor families that show a large change in the emission ratio and cover a range of physiologically relevant Zn2+ affinities. The LuZi platform relies on competitive complementation of split NanoLuc luciferase and displays a robust, 2-fold change in red-to-blue emission, allowing quantification of free Zn2+ between 2 pM and 1 nM. The second platform was developed by replacing the long flexible GGS linker in the original BLZinCh sensor by rigid polyproline linkers, yielding a series of BLZinCh-Pro sensors with a 3-4-fold improved ratiometric response and physiologically relevant Zn2+ affinities between 0.5 and 1 nM. Both the LuZi and BLZinCh-Pro sensors allowed the direct determination of low nM concentrations of free Zn2+ in serum, providing an attractive alternative to more laborious and/or indirect approaches to measure serum zinc levels. Furthermore, the genetic encoding of the BLZinCh-Pro sensors allowed their use as intracellular sensors, where the sensor occupancy of 40-50% makes them ideally suited to monitor both increases and decreases in intracellular free Zn2+ concentration in simple, plate reader-based measurements, without the need for fluorescence microscopy.