Importance of the Reactant-State Potentials of Chromium(V)-Oxo Complexes to Determine the Reactivity in Hydrogen-Atom Transfer Reactions.

A new chromium(V)-oxo complex, [CrV(O)(6-COO--py-tacn)]2+ (1; 6-COO--py-tacn = 1-(6-carboxylato-2-pyridylmethyl)-4,7-dimethyl-1,4,7-triazacyclononane), was synthesized and characterized to evaluate the reactivity of CrV(O) complexes in a hydrogen-atom transfer (HAT) reaction by comparing it with that of a previously reported CrV(O) complex, [CrV(O)(6-COO--tpa)]2+ (2; 6-COO--tpa = N, N-bis(2-pyridylmethyl)- N-(6-carboxylato-2-pyridylmethyl)amine). Definitive differences of these two CrV(O) complexes were observed in resonance Raman scatterings of the Cr-O bond (ν = 911 cm-1 for 1 and 951 cm-1 for 2) and the reduction potential (0.73 V vs SCE for 1 and 1.23 V for 2); this difference should be derived from that of the ligand bound at the trans position to the oxo ligand, a tertiary amino group in 1, and a pyridine nitrogen in 2. When we employed 9,10-dihydroanthracene as a substrate, the second-order rate constant ( k) of 1 was 4000 times smaller than that of 2. Plots of normalized k values for both complexes relative to bond dissociation energies (BDEs) of C-H bonds to be cleaved in several substrates showed a pair of parallel lines with slopes of -0.91 for 1 and -0.62 for 2, indicating that the HAT reactions by the two complexes proceed via almost the same transition states. Judging from estimated BDEs of CrIV(OH)/CrV(O) (85-87 kcal mol-1 for 1 and 92-94 kcal mol-1 for 2) and the activation barrier in the HAT reaction of DHA ( Ea = 7.9 kcal mol-1 for 1 and Ea = 4.8 kcal mol-1 for 2), the reactivity of CrV(O) complexes in HAT reactions depends on the energy level of the reactant state rather than the product state.

Geometric effects on OO bond scission of copper(II)-alkylperoxide complexes.

Copper(II) complexes supported by N3-tridentate ligands, consisting of a rigid cyclic diamine (8-membered cyclic-diamine; L8 or 7-membered cyclic-diamine; L7) and a 2-(2-pyridyl)ethyl (-CH2CH2Py) group, were synthesized and structurally characterized. Reaction of the copper(II) complexes and cumene hydroperoxide (CmOOH) in the presence of triethylamine in CH3CN gave the corresponding cumylperoxide complexes L8CuIIOOCm and L7CuIIOOCm. The UV-vis and EPR spectra suggested that L8CuIIOOCm takes a tetrahedrally distorted structure, whereas L7CuIIOOCm has a planar geometry in solution. Resonance Raman spectra of these alkylperoxide complexes indicated that the O-O stretching vibration energy of L8CuIIOOCm (νO-O=878cm-1) is somewhat lower than that of L7CuIIOOCm (νO-O=881cm-1). Such a difference in O-O bond strength is reflected to the reactivity difference of these two alkylperoxide complexes. Namely, the reactivity L8CuIIOOCm toward CHD (1,4-cyclohexadiene) as well as solvent molecule (CH3CN) is higher than that of L7CuIIOOCm due to the weaker O-O bond of the former complex as compared to that of the latter complex. Geometric effects on the reactivity induced by the supporting ligands are discussed.

Specific Enhancement of Catalytic Activity by a Dicopper Core: Selective Hydroxylation of Benzene to Phenol with Hydrogen Peroxide.

A dicopper(II) complex, stabilized by the bis(tpa) ligand 1,2-bis[2-[bis(2-pyridylmethyl)aminomethyl]-6-pyridyl]ethane (6-hpa), [Cu2 (µ-OH)(6-hpa)]3+ , was synthesized and structurally characterized. This complex catalyzed selective hydroxylation of benzene to phenol using H2 O2 , thus attaining large turnover numbers (TONs) and high H2 O2 efficiency. The TON after 40 hours for the phenol production exceeded 12000 in MeCN at 50 °C under N2 , the highest value reported for benzene hydroxylation with H2 O2 catalyzed by homogeneous complexes. At 22 % benzene conversion, phenol (95.2 %) and p-benzoquinone (4.8 %) were produced. The mechanism of H2 O2 activation and benzene hydroxylation is proposed.

A Ruthenium(III)-Oxyl Complex Bearing Strong Radical Character.

Proton-coupled electron-transfer oxidation of a RuII -OH2 complex, having an N-heterocyclic carbene ligand, gives a RuIII -O. species, which has an electronically equivalent structure of the RuIV =O species, in an acidic aqueous solution. The RuIII -O. complex was characterized by spectroscopic methods and DFT calculations. The oxidation state of the Ru center was shown to be close to +3; the Ru-O bond showed a lower-energy Raman scattering at 732 cm-1 and the Ru-O bond length was estimated to be 1.77(1) Å. The RuIII -O. complex exhibits high reactivity in substrate oxidation under catalytic conditions; particularly, benzaldehyde and the derivatives are oxidized to the corresponding benzoic acid through C-H abstraction from the formyl group by the RuIII -O. complex bearing a strong radical character as the active species.

Formation and High Reactivity of the anti-Dioxo Form of High-Spin µ-Oxodioxodiiron(IV) as the Active Species That Cleaves Strong C-H Bonds.

Recently, it was shown that µ-oxo-µ-peroxodiiron(III) is converted to high-spin µ-oxodioxodiiron(IV) through O-O bond scission. Herein, the formation and high reactivity of the anti-dioxo form of high-spin µ-oxodioxodiiron(IV) as the active oxidant are demonstrated on the basis of resonance Raman and electronic-absorption spectral changes, detailed kinetic studies, DFT calculations, activation parameters, kinetic isotope effects (KIE), and catalytic oxidation of alkanes. Decay of µ-oxodioxodiiron(IV) was greatly accelerated on addition of substrate. The reactivity order of substrates is toluene

A Model for the Active-Site Formation Process in DMSO Reductase Family Molybdenum Enzymes Involving Oxido-Alcoholato and Oxido-Thiolato Molybdenum(VI) Core Structures.

New bis(ene-1,2-dithiolato)-oxido-alcoholato molybdenum(VI) and -oxido-thiolato molybdenum(VI) anionic complexes, denoted as [Mo(VI)O(ER)L2](-) (E = O, S; L = dimethoxycarboxylate-1,2-ethylenedithiolate), were obtained from the reaction of the corresponding dioxido-molybdenum(VI) precursor complex with either an alcohol or a thiol in the presence of an organic acid (e.g., 10-camphorsulfonic acid) at low temperature. The [Mo(VI)O(ER)L2](-) complexes were isolated and characterized, and the structure of [Mo(VI)O(OEt)L2](-) was determined by X-ray crystallography. The Mo(VI) center in [Mo(VI)O(OEt)L2](-) exhibits a distorted octahedral geometry with the two ene-1,2-dithiolate ligands being symmetry inequivalent. The computed structure of [Mo(VI)O(SR)L2](-) is essentially identical to that of [Mo(VI)O(OR)L2](-). The electronic structures of the resulting molybdenum(VI) complexes were evaluated using electronic absorption spectroscopy and bonding calculations. The nature of the distorted O(h) geometry in these [Mo(VI)O(EEt)L2](-) complexes results in a lowest unoccupied molecular orbital wave function that possesses strong π* interactions between the Mo(d(xy)) orbital and the cis S(p(z)) orbital localized on one sulfur donor from a single ene-1,2-dithiolate ligand. The presence of a covalent Mo-S(dithiolene) bonding interaction in these monooxido Mo(VI) compounds contributes to their low-energy ligand-to-metal charge transfer transitions. A second important d-p π bonding interaction derives from the ∼180° O(oxo)-Mo-E-C dihedral angle involving the alcoholate and thiolate donors, and this contributes to ancillary ligand contributions to the electronic structure of these species. The formation of [Mo(VI)O(OEt)L2](-) and [Mo(VI)O(SEt)L2](-) from the dioxidomolybdenum(VI) precursor may be regarded as a model for the active-site formation process that occurs in the dimethyl sulfoxide reductase family of pyranopterin molybdenum enzymes.

Influence of ligand flexibility on the electronic structure of oxidized Ni(III)-phenoxide complexes.

One-electron-oxidized Ni(III)-phenoxide complexes with salen-type ligands, [Ni(salen)py2](2+) ([1(en)-py](2+)) and [Ni(1,2-salcn)py2](2+) ([1(cn)-py](2+)), with a five-membered chelate dinitrogen backbone and [Ni(salpn)py2](2+) ([2(pn)-py](2+)), with a six-membered chelate backbone, have been characterized with a combination of experimental and theoretical methods. The five-membered chelate complexes [1(en)-py](2+) and [1(cn)-py](2+) were assigned as Ni(III)-phenoxyl radical species, while the six-membered chelate complex [2(pn)-py](2+) was concluded to be a Ni(II)-bis(phenoxyl radical) species with metal-centered reduction in the course of the one-electron oxidation of the Ni(III)-phenoxide complex [2(pn)-py](+). Thus, the oxidation state of the one-electron-oxidized Ni(III) salen-type complexes depends on the chelate ring size of the dinitrogen backbone.

Geometric control of nuclearity in copper(I)/dioxygen chemistry.

Copper(I) complexes supported by a series of N3-tridentate ligands bearing a rigid cyclic diamine framework such as 1,5-diazacyclooctane (L8, eight-membered ring), 1,4-diazacycloheptane (L7, seven-membered ring), or 1,4-diazacyclohexane (L6, six-membered ring) with a common 2-(2-pyridyl)ethyl side arm were synthesized and their reactivity toward O2 were compared. The copper(I) complex of L8 preferentially provided a mononuclear copper(II) end-on superoxide complex S as reported previously [Itoh, S., et al. J. Am. Chem. Soc. 2009, 131, 2788-2789], whereas a copper(I) complex of L7 gave a bis(µ-oxido)dicopper(III) complex O at a low temperature (-85 °C) in acetone. On the other hand, no such active-oxygen complex was detected in the oxygenation reaction of the copper(I) complex of L6 under the same conditions. In addition, O2-reactivity of the copper(I) complex supported by an acyclic version of the tridentate ligand (LA, PyCH2CH2N(CH3)CH2CH2CH2N(CH3)2; Py = 2-pyridyl) was examined to obtain a mixture of a (µ-η(2):η(2)-peroxido)dicopper(II) complex (S)P and a bis(µ-oxido)dicopper(III) complex O. Careful inspection of the crystal structures of copper(I) and copper(II) complexes and the redox potentials of copper(I) complexes has revealed important geometric effects of the supporting ligands on controlling nuclearity of the generated copper active-oxygen complexes.

A copper complex supported by an N2S-tridentate ligand inducing efficient heterolytic O-O bond cleavage of alkylhydroperoxide.

We have recently reported a copper(II)-superoxide complex supported by an N3-tridentate ligand (L(N3)), which exhibits a similar structure and reactivity to those of a putative reactive intermediate involved in the catalytic reactions of copper monooxygenases such as peptidylglycine α-hydroxylating monooxygenase (PHM) and dopamine ß-monooxygenase (DßM). In this study, we have synthesised and characterised copper complexes supported by a related sulphur-containing ligand (L(N2S)) to get insight into the notable electronic effect of the sulphur donor atom in the reaction with cumene hydroperoxide, inducing efficient heterolytic O-O bond cleavage.

Two-dimensional crystallization of intact F-ATP synthase isolated from bovine heart mitochondria.

Mitochondrial F-ATP synthase produces the majority of ATP for cellular functions requiring free energy. The structural basis for proton motive force-driven rotational catalysis of ATP formation in the holoenzyme remains to be determined. Here, the purification and two-dimensional crystallization of bovine heart mitochondrial F-ATP synthase are reported. Two-dimensional crystals of up to 1 µm in size were grown by dialysis-mediated detergent removal from a mixture of decylmaltoside-solubilized 1,2-dimyristoyl-sn-glycero-3-phosphocholine and F-ATP synthase against a detergent-free buffer. A projection map calculated from an electron micrograph of a negatively stained two-dimensional crystal revealed unit-cell parameters of a = 185.0, b = 170.3 Å, γ = 92.5°.