Photon echoes using atomic frequency combs in Pr:YSO - experiment and semiclassical theory.

Photon echoes in rare-earth-doped crystals are studied to understand the challenges of making broadband quantum memories using the atomic frequency comb (AFC) protocol in systems with hyperfine structure. The hyperfine structure of Pr3+ poses an obstacle to this goal because frequencies associated with the hyperfine transitions change the simple picture of modulation at an externally imposed frequency. The current work focuses on the intermediate case where the hyperfine spacing is comparable to the comb spacing, a challenging regime that has recently been considered. Operating in this regime may facilitate storing quantum information over a larger spectral range in such systems. In this work, we prepare broadband AFCs using optical combs with tooth spacings ranging from 1 MHz to 16 MHz in fine steps, and measure transmission spectra and photon echoes for each. We predict the spectra and echoes theoretically using the optical combs as input to either a rate equation code or a density matrix code, which calculates the redistribution of populations. We then use the redistributed populations as input to a semiclassical theory using the frequency-dependent dielectric function. The two sets of predictions each give a good, but different account of the photon echoes.

Low-noise photon counting above 100 million counts per second with a high-efficiency reach-through single-photon avalanche diode system.

We demonstrate a method that allows a high-efficiency single-photon-avalanche diode (SPAD) with a thick absorption region (> 10 µm) to count single photons at rates significantly higher than previously demonstrated. We apply large (> 30 V) AC bias gates to the SPAD at 1 GHz and detect minute avalanches with a discrimination threshold of 5(1) mV by means of radio-frequency (RF) interferometry. We measure a reduction by a factor of ≈ 500 in the average charge per avalanche when compared to operation in its traditional active-quenching module, and a relative increase of >19 % in detection efficiency at 850 nm. The reduction in charge strongly suppresses self-heating effects in the diode that can degrade performance at high avalanche rates. We show that the single-photon detection system maintains high efficiency at count rates exceeding 108s-1.

A post-processing-free single-photon random number generator with ultra-low latency.

The low-latency requirements of a practical loophole-free Bell test preclude time-consuming post-processing steps that are often used to improve the statistical quality of a physical random number generator (RNG). Here we demonstrate a post-processing-free RNG that produces a random bit within 2.4(2) ns of an input trigger. We use weak feedback to eliminate long-term drift, resulting in 24 hour operation with output that is statistically indistinguishable from a Bernoulli process. We quantify the impact of the feedback on the predictability of the output as less than 6.4×10-7 and demonstrate the utility of the Allan variance as a tool for characterizing non-idealities in RNGs.

Statistically background-free, phase-preserving parametric up-conversion with faint light.

We demonstrate up-conversion with no statistically significant background photons and a dynamic range of 15 decades. Near-infrared 920 nm photons were converted into the visible at 577 nm using periodically poled lithium niobate waveguides pumped by a 1550 nm laser. In addition to achieving statistically noiseless frequency up-conversion, we report a high degree of phase preservation (with fringe visibilities ≥ 0.97) at the single-photon level using an up-converting Mach-Zehnder interferometer. This background-free process opens a path to single-photon detection with no intrinsic dark count. Combined with a demonstrated photon-number preserving property of an up-converter, this work demonstrates the feasibility of noiseless frequency up-conversion of entangled photon pairs.

Absolute calibration of a variable attenuator using few-photon pulses.

We demonstrate the ability to calibrate a variable optical attenuator directly at the few-photon level using a superconducting Transition Edge Sensor (TES). Because of the inherent linearity of photon-number resolving detection, no external calibrations are required, even for the energy of the laser pulses, which ranged from means of 0.15 to 18 photons per pulse at the detector. To verify this method, calibrations were compared to an independent conventional calibration made at much higher photon fluxes using analog detectors. In all cases, the attenuations estimated by the two methods agree within their uncertainties.Our few-photon measurement determined attenuations using the Poisson-Influenced K-Means Algorithm (PIKA) to extract mean numbers of photons per pulse along with the uncertainties of these means. The robustness of the method is highlighted by the agreement of the two calibrations even in the presence of significant drifts in the optical power over the course of the experiment.Work of the United States Government. Not subject to copyright.

Strong Loophole-Free Test of Local Realism.

We present a loophole-free violation of local realism using entangled photon pairs. We ensure that all relevant events in our Bell test are spacelike separated by placing the parties far enough apart and by using fast random number generators and high-speed polarization measurements. A high-quality polarization-entangled source of photons, combined with high-efficiency, low-noise, single-photon detectors, allows us to make measurements without requiring any fair-sampling assumptions. Using a hypothesis test, we compute p values as small as 5.9×10^{-9} for our Bell violation while maintaining the spacelike separation of our events. We estimate the degree to which a local realistic system could predict our measurement choices. Accounting for this predictability, our smallest adjusted p value is 2.3×10^{-7}. We therefore reject the hypothesis that local realism governs our experiment.

Polarization-entangled photon pairs from a periodically poled crystalline waveguide.

A proposal is made for the generation of polarization-entangled photon pairs from a periodically poled crystal allowing for high collection efficiency, high entanglement, and stable operation. The theory is formulated for colinear propagation for application to waveguides. The key feature of the theory is the use of type II phase matching using both the +1 and -1 diffraction orders of the poling structure. Although these conditions are fairly restrictive in terms of operating parameters, practical operating conditions can be found. For example, we find that a HeNe pump laser may be used for a periodically poled rubidium-doped potassium titanyl phosphate (Rb:KTP) waveguide to yield single mode polarization-entangled pairs. Fidelities of 0.98 are possible under practical conditions.

Frequency-bin entangled comb of photon pairs from a Silicon-on-Insulator micro-resonator.

We present a quantum-mechanical theory to describe narrowband photon-pair generation via four-wave mixing in a Silicon-on-Insulator (SOI) micro-resonator. We also provide design principles for efficient photon-pair generation in an SOI micro-resonator through extensive numerical simulations. Microring cavities are shown to have a much wider dispersion-compensated frequency range than straight cavities. A microring with an inner radius of 8 µm can output an entangled photon comb of 21 pairwise-correlated peaks (42 comb lines) spanning from 1.3 µm to 1.8 µm. Such on-chip quantum photonic devices offer a path toward future integrated quantum photonics and quantum integrated circuits.

A versatile waveguide source of photon pairs for chip-scale quantum information processing.

We demonstrate a bright, bandwidth-tunable, quasi-phase-matched single-waveguide source generating photon pairs near 900 nm and 1300 nm. Two-photon coincidence spectra are measured at a range of operating temperatures of a periodically-poled KTiOPO(4) (PPKTP) waveguide, which supports both type-0 and type-II spontaneous parametric down-conversion. We map out relative contributions of two-photon to one-photon fluorescence for a range of operating parameters. Such a versatile device is highly promising for future chip-scale quantum information processing.

High accuracy verification of a correlated-photon- based method for determining photoncounting detection efficiency.

We have characterized an independent primary standard method to calibrate detection efficiency of photon-counting detectors based on twophoton correlations. We have verified this method and its uncertainty by comparing it to a substitution method using a conventionally calibrated transfer detector tied to a national primary standard detector scale. We obtained a relative standard uncertainty for the correlated-photon method of 0.18 % (k=1) and for the substitution method of 0.17 % (k=1). From a series of measurements we found that the two independent calibration techniques differ by 0.14 (14) %, which is within the established uncertainty of comparison. We believe this is the highest accuracy characterization and independent verification of the correlated-photon method yet achieved.

Linearity of a Silicon Photodiode at 30 MHz and Its Effect on Heterodyne Measurements.

The effect of optical irradiance on the linearity of a Si photodiode was studied. These results are compared for light modulated at 30 MHz and at dc as the optical irradiance was varied over a 9 decade range. We discuss how these results affect the use of this detector as a heterodyne receiver. As the optical irradiance varied from 10-2 to 10+3 mW/cm2, while maintaining constant total power, the photocurrent was constant to about 1%, but as the power density increased further, the photocurrent increased about 13%. At the highest densities that we could achieve, about 6×107 mW/cm2 there was only slight evidence of the onset of saturation. These results are of importance in our work to use optical heterodyne detection to measure filter transmittances over a wide dynamic range. The results provide guidelines for achieving maximum accuracy when using this particular diode as an optical heterodyne receiver.