ABSTRACT
OBJECTIVE: To elucidate potential tissue coverage of side-firing optical fibers in office-based endoscopic laser treatment of larynx, as well as to demonstrate their enhanced ability to address challenging anatomic areas. METHOD: We performed a comparative study of four different fiber designs: a traditional forward-facing fiber, and three side-firing fibers that emit light at an angle of 45°, 70°, and 90°, respectively. The study was conducted in simulation, using eight three-dimensional models of the human larynx generated from microtomography x-ray scans. A computer program simulated the insertion of the endoscope into the larynx, and the Möller-Trumbore algorithm was used to simulate the application of laser light. RESULTS: Side-firing laser fibers increased potential tissue coverage by a mean of 50.2 (standard deviation [SD] 25.8), 73.8 (SD 41.3), and 84.0 (SD 47.6) percent for angles of 45°, 70°, and 90°, respectively, compared to forward-facing fibers. Angled fibers provided access to areas of the larynx considered difficult to address by traditional methods, including the infraglottis, laryngeal ventricle, and right vocal fold. CONCLUSION: Simulation results suggest that side-firing optical fibers have the potential to enhance anatomical access during in-office endoscopic laser procedures in the larynx. Further research is needed to better understand the benefits and any potential risks or contraindications of side-firing optical fibers. LEVEL OF EVIDENCE: NA Laryngoscope, 133:1205-1210, 2023.
Subject(s)
Larynx , Laser Therapy , Humans , Optical Fibers , Larynx/diagnostic imaging , Larynx/surgery , Endoscopy , Laser Therapy/methods , Vocal Cords/diagnostic imaging , Vocal Cords/surgeryABSTRACT
This paper reports the design, construction, and experimental validation of a novel hand-held robot for in-office laser surgery of the vocal folds. In-office endoscopic laser surgery is an emerging trend in Laryngology: It promises to deliver the same patient outcomes of traditional surgical treatment (i.e., in the operating room), at a fraction of the cost. Unfortunately, office procedures can be challenging to perform; the optical fibers used for laser delivery can only emit light forward in a line-of-sight fashion, which severely limits anatomical access. The robot we present in this paper aims to overcome these challenges. The end effector of the robot is a steerable laser fiber, created through the combination of a thin optical fiber (Ï 0.225 mm) with a tendon-actuated Nickel-Titanium notched sheath that provides bending. This device can be seamlessly used with most commercially available endoscopes, as it is sufficiently small (Ï 1.1 mm) to pass through a working channel. To control the fiber, we propose a compact actuation unit that can be mounted on top of the endoscope handle, so that, during a procedure, the operating physician can operate both the endoscope and the steerable fiber with a single hand. We report simulation and phantom experiments demonstrating that the proposed device substantially enhances surgical access compared to current clinical fibers.