Soft 3D hybrid network for delivery and controlled release of poorly soluble dihydropyrimidinone compound: An insight into the novel system for potential application in leukemia treatment.

Researchers are faced with everyday demands for safer and more efficient therapy for many diseases, especially serious one such as various types of cancer. Numerous anticancer drugs are poorly-water soluble and therefore their encapsulation and controlled release remain quite challenge. In present study, we deepened our research of hydrophilic carrier based on poly(methacrylic acid) and casein (PMAC) by investigating its potential for encapsulation and controlled release of novel poorly water-soluble dihydropyrimidion-azo-pyridon compound (DHPMP). DHPMP is a dye that has been proven to show cytotoxic activity against chronic myeloid leukemia K562 cells. By encapsulating DHPMP into the carrier and delivering it into the intestines, DHPMP absorption could be the fastest and the number of therapeutic doses and side effects can be reduced. Carriers based on PMAC and DHPMP (PMAC-DHPMP) were synthetized and characterized by FTIR, SEM and single compression tests. The swelling behavior of PMAC-DHPMP carriers and cumulative DHPMP release were investigated depending on the amount of crosslinker and encapsulated DHPMP in two media which were simulating pH environments in human stomach and intestines. The prolonged and controlled release of DHPMP was achieved. In vitro cytotoxic activity of PMAC-DHPMP carriers against K562 cells and the cell cycle analysis showed great potential of the carriers for application in leukemia treatment.

Improvement of theoretical UV-Vis spectra calculations by empirical solvatochromic parameters: Case study of 5-arylazo-3-cyano-1-ethyl-6-hydroxy-4-methyl-2-pyridones.

In order to improve the performance of theoretical UV-Vis spectra predictions, a theoretical and experimental study of solvatochromic properties of ten azo pyridone dyes has been performed. For quantitative estimation of intermolecular solvent-solute interactions, a concept of the linear solvation energy relationships has been applied using Kamlet-Taft and Catalán models. Theoretical UV-Vis spectra for all dyes have been calculated using four TD-DFT methods in nine different solvents with the aim to define the most reliable model. Finally, new polylinear equations for more accurate theoretical prediction of UV-Vis maxima are developed using empirical Kamlet-Taft and Catalán solvent parameters as additive corrections for specific and nonspecific solvent-solute interactions.

Immobilization of horseradish peroxidase onto Purolite® A109 and its anthraquinone dye biodegradation and detoxification potential.

Horseradish peroxidase (HRP) is a highly specific enzyme with great potential for use in the decolorization of synthetic dyes. A comprehensive study of HRP immobilization using various techniques such as adsorption and covalent immobilization on the novel carrier Purolite® A109 with a special focus on enzymatic decolorization and toxicity of artificially colored wastewater. The immobilized preparations with an activity of 156.21 ± 1.41 U g-1 and 85.71 ± 1.62 U g-1 after the HRP adsorption and covalent immobilization, respectively, were obtained. Stability and reusability of the immobilized preparations were also evaluated. A noteworthy decolorization level (~90%) with immobilized HRP was achieved. Phytotoxicity testing using Mung bean seeds and acute toxicity assay with Artemia salina has confirmed the applicability of the obtained immobilized preparation in industrial wastewater plants for the treatment of colored wastewater.

Voltammetric Investigation of Inclusion Complexes of the Selected Succinimides with ß-Cyclodextrin and (2-Hydroxypropyl)-ß-Cyclodextrin.

The inclusion complexes of the selected, potentially biologically active, succinimides with ß-cyclodextrin (µCD) and (2-hydroxypropyl)-ß-cyclodextrin (HPµCD) were prepared. the formation of the inclusion complexes of the investigated monophenyl and diphenyl succinimide derivatives was confirmed using attenuated total reflection (ATR) study. Their electrochemical behavior was examined by cyclic voltammetry (CV) and square wave voltammetry (SWV) in 0.05 M NaHCO3 on a gold electrode. The stability constants for compound 1 were determined by cyclic voltammetry and calculated as KµCD = 350.87 M-1 and KHPµCD = 250.67 M-1. The SWV measurements reveal well defined peak at potential Ep = ~ 60 mV and the higher currents at Ep for both inclusion complex of the succinimides compared to the free compounds. The impact of chlorine atom in the phenyl moiety of succinimide derivatives on the activity in electrooxidation reaction is presented. Among the studied succinimides, according to SWV measurements, the most active is the monophenyl succinimide derivative (compound 1) in complex with µCD. The difference of peak current of compound 1 + µCD compared to compound 1 + HPµCD and free compound is 6.3 and 35.2 µA cm-2, respectively.

The photocatalytic degradation of carbofuran and Furadan 35-ST: the influence of inert ingredients.

A comparative study on photocatalytic degradation of the pesticide carbofuran and its commercial product Furadan 35-ST in an aqueous suspension of ZnO, irradiated by long-wave light (315-400 nm), is presented in this study. In order to assess the effects of inert ingredients present in the commercial product Furadan 35-ST, non-competitive and competitive adsorption and kinetic studies of carbofuran degradation processes were conducted. A higher photochemical degradation rate was found for pure carbofuran in comparison to a two-component system, carbofuran and single addition of ingredients at appropriate concentrations, and the commercial product Furadan 35-ST. The overall effect of inert ingredients was evaluated from a competitive study using the model system of Furadan 35-ST. The results of a mineralization study, obtained by ion chromatography (IC) and total organic carbon (TOC) analyses, revealed the formation of acetate, oxalate, and formate ions. Photodegradation products of carbofuran, three of them detected for the first time, were identified based on high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) and gas chromatography-mass spectrometry (GC-MS) results, and their photodegradation pathways were proposed.

Covalent Immobilization of Enzymes on Eupergit® Supports: Effect of the Immobilization Protocol.

A selection of best combination of adequate immobilization support and efficient immobilization method is still a key requirement for successful application of immobilized enzymes on an industrial level. Eupergit® supports exhibit good mechanical and chemical properties and allow establishment of satisfactory hydrodynamic regime in enzyme reactors. This is advantageous for their wide application in enzyme immobilization after finding the most favorable immobilization method. Methods for enzyme immobilization that have been previously reported as efficient considering the obtained activity of immobilized enzyme are presented: direct binding to polymers via their epoxy groups, binding to polymers via a spacer made from ethylene diamine/glutaraldehyde, and coupling the periodate-oxidized sugar moieties of the enzymes to the polymer beads. The modification of the conventionally immobilized enzyme with ethylenediamine via the carbodiimide route seems to be a powerful tool to improve its stability and catalytic activity.

Immobilization of horseradish peroxidase onto kaolin.

Kaolin showed as a very perspective carrier for the enzyme immobilization and it was used for the adsorption of horseradish peroxidase (HRP). The effects of the enzyme concentration and pH on the immobilization efficiency were studied in the reaction with pyrogallol and anthraquinone dye C.I. Acid Violet 109 (AV 109). In addition, Fourier transform infrared spectroscopy, scanning electron microscopy and analysis by Brunauer-Emmett-Teller were performed for kaolin, thermally activated kaolin and the immobilized enzyme. It has been shown that 0.1 IU of HRP-kaolin decolorized 87 % of dye solution, under the optimal conditions (pH 5.0, temperature 24 °C, dye concentration 40 mg/L and 0.2 mM of H2O2) within 40 min. The immobilized HRP decolorization follows the Ping Pong Bi-Bi mechanism with dead-end inhibition by the dye. The biocatalyst retained 35 ± 0.9 % of the initial activity after seven cycles of reuse in the decolorization reaction of AV 109 under optimal conditions in a batch reactor. The obtained kinetic parameters and reusability study confirmed improvement in performances of k-HRP compared to free, indicating that k-HRP has a great potential for environmental purposes.

Computational and spectroscopic data correlation study of N,N'-bisarylmalonamides (Part II).

To complement a previous UV study, we present a quantitative evaluation of substituent effects on spectroscopic data ((1)H and (13)C NMR chemical shifts as well as FT-IR absorption frequency) applied to N,N'-bisarylmalonamides, using simple and extended Hammett equations as well as the Swain-Lupton equation. Furthermore, the DFT CAM-B3LYP/6-311+G(d,p) method was applied to study the impact of different solvents on the geometry of the molecules and their spectral data. Additionally, experimental data are correlated with theoretical results; excellent linear dependence was obtained. The overall results presented in this paper show that N,N'-bisarylmalonamides are prominent candidates for model molecules.

Solvent and structural effects in tautomeric 2(6)-hydroxy-4-methyl-6(2)-oxo-1-(substituted phenyl)-1,2(1,6)-dihydropyridine-3-carbonitriles: UV, NMR and quantum chemical study.

The state of the tautomeric equilibria of 2(6)-hydroxy-4-methyl-6(2)-oxo-1-(substituted phenyl)-1,2(1,6)-dihydropyridine-3-carbonitriles, 2-PY/6-PY, was evaluated using experimental and theoretical methodology. The experimental data were interpreted with the aid of time-dependent density functional (TD-DFT) method. Electron charge density was obtained by the use of Quantum Theory of Atoms in Molecules, i.e. Bader's analysis. Linear solvation energy relationships (LSER) rationalized solvent influence on tautomeric equilibrium. Linear free energy relationships (LFERs) were applied to the substituent-induced NMR chemical shifts (SCS) using SSP (single substituent parameter) and DSP (dual substituent parameter) model. Theoretical calculations and obtained correlations gave insight into the influence of molecular conformation on the transmission of substituent electronic effects, as well as on different solvent-solute interactions, and the state of tautomeric equilibrium.

Decolorization of anthraquinonic dyes from textile effluent using horseradish peroxidase: optimization and kinetic study.

Two anthraquinonic dyes, C.I. Acid Blue 225 and C.I. Acid Violet 109, were used as models to explore the feasibility of using the horseradish peroxidase enzyme (HRP) in the practical decolorization of anthraquinonic dyes in wastewater. The influence of process parameters such as enzyme concentration, hydrogen peroxide concentration, temperature, dye concentration, and pH was examined. The pH and temperature activity profiles were similar for decolorization of both dyes. Under the optimal conditions, 94.7% of C.I. Acid Violet 109 from aqueous solution was decolorized (treatment time 15 min, enzyme concentration 0.15 IU/mL, hydrogen peroxide concentration 0.4 mM, dye concentration 30 mg/L, pH 4, and temperature 24°C) and 89.36% of C.I. Acid Blue 225 (32 min, enzyme concentration 0.15 IU/mL, hydrogen peroxide concentration 0.04 mM, dye concentration 30 mg/L, pH 5, and temperature 24°C). The mechanism of both reactions has been proven to follow the two substrate ping-pong mechanism with substrate inhibition, revealing the formation of a nonproductive or dead-end complex between dye and HRP or between H2O2 and the oxidized form of the enzyme. Both chemical oxygen demand and total organic carbon values showed that there was a reduction in toxicity after the enzymatic treatment. This study verifies the viability of use of horseradish peroxidase for the wastewaters treatment of similar anthraquinonic dyes.

Nanocrystalline CeO2-δ as effective adsorbent of azo dyes.

Ultrafine CeO2-δ nanopowder, prepared by a simple and cost-effective self-propagating room temperature synthesis method (SPRT), showed high adsorption capability for removal of different azo dyes. Batch type of adsorption experiments with fixed initial pH value were conducted for the removal of Reactive Orange 16 (RO16), Methyl Orange (MO), and Mordant Blue 9 (MB9). The equilibrium adsorption data were evaluated using Freundlich and Langmuir isotherm models. The Langmuir model slightly better describes isotherm data for RO16 and MO, whereas the Freundlich model was found to best fit the isotherm data for MB9 over the whole concentration range. The maximum adsorption capacities, determined from isotherm data for MO, MB9, and RO16 were 113, 101, and 91 mg g(-1) respectively. The adsorption process follows the pseudo-second-order kinetic model indicating the coexistence of chemisorption and physisorption. The mechanism of azo dye adsorption is also discussed.

Spectroscopic and quantum mechanical investigation of N,N'-bisarylmalonamides: solvent and structural effects.

The UV absorption spectra of ten N,N'-bisarylmalonamides have been recorded in the range 200-400 nm in a set of selected solvents. The solute-solvent interactions have been analyzed on the basis of the linear solvation energy relationship (LSER) concept proposed by Kamlet and Taft. The effects of substituents on the absorption spectra have been interpreted by correlating absorption frequencies with Hammett substituent constants. Furthermore, the experimental findings have been interpreted using the DFT CAM-B3LYP/6-311+G(d,p) method. Electronic energies have been calculated using the same method in combination with the implicit solvation model (conductor-like polarizable continuum model, CPCM) as well as with the explicit addition of two molecules of solvent.

Synthesis of aliphatic esters of cinnamic acid as potential lipophilic antioxidants catalyzed by lipase B from Candida antarctica.

Immobilized lipase from Candida antarctica (Novozyme 435) was tested for the synthesis of various phenolic acid esters (ethyl and n-butyl cinnamate, ethyl p-coumarate and n-butyl p-methoxycinnamate). The second-order kinetic model was used to mathematically describe the reaction kinetics and to compare present processes quantitatively. It was found that the model agreed well with the experimental data. Further, the effect of alcohol type on the esterification of cinnamic acid was investigated. The immobilized lipase showed more ability to catalyze the synthesis of butyl cinnamate. Therefore, the process was optimized for the synthesis of butyl cinnamate as a function of solvent polarity (logP) and amount of biocatalyst. The highest ester yield of 60.7 % was obtained for the highest enzyme concentration tested (3 % w/w), but the productivity was for 34 % lower than the corresponding value obtained for the enzyme concentration of 1 % (w/w). The synthesized esters were purified, identified, and screened for antioxidant activities. Both DPPH assay and cyclic voltammetry measurement have shown that cinnamic acid esters have better antioxidant properties than cinnamic acid itself.

Synthesis, structure and solvatochromic properties of some novel 5-arylazo-6-hydroxy-4-phenyl-3-cyano-2-pyridone dyes.

BACKGROUND: A series of some novel arylazo pyridone dyes was synthesized from the corresponding diazonium salt and 6-hydroxy-4-phenyl-3-cyano-2-pyridone using a classical reaction for the synthesis of the azo compounds. RESULTS: The structure of the dyes was confirmed by UV-vis, FT-IR, 1H NMR and 13C NMR spectroscopic techniques and elemental analysis. The solvatochromic behavior of the dyes was evaluated with respect to their visible absorption properties in various solvents. CONCLUSIONS: The azo-hydrazone tautomeric equilibration was found to depend on the substituents as well as on the solvent. The geometry data of the investigated dyes were obtained using DFT quantum-chemical calculations. The obtained calculational results are in very good agreement with the experimental data.

Immobilization of lipase from Candida rugosa on Sepabeads(®): the effect of lipase oxidation by periodates.

The objective of this paper was the investigation of a suitable Sepabeads(®) support and method for immobilization of lipase from Candida rugosa. Three different supports were used, two with amino groups, (Sepabeads(®) EC-EA and Sepabeads(®) EC-HA), differing in spacer length (two and six carbons, respectively) and one with epoxy group (Sepabeads(®) EC-EP). Lipase immobilization was carried out by two conventional methods (via epoxy groups and via glutaraldehyde), and with periodate method for modification of lipase. The results of activity assays showed that lipase retained 94.8% or 87.6% of activity after immobilization via epoxy groups or with periodate method, respectively, while glutaraldehyde method was inferior with only 12.7% of retention. The immobilization of lipase, previously modified by periodate oxidation, via amino groups has proven to be more efficient than direct immobilization of lipase via epoxy groups. In such a way immobilized enzyme exhibited higher activity at high reaction temperatures and higher thermal stability.

The immobilization of enzyme on Eupergit® supports by covalent attachment.

A selection of the best combination of adequate immobilization support and efficient immobilization method is still a key requirement for successful application of immobilized enzymes on the industrial level. Eupergit) supports exhibit good mechanical and chemical properties and allow establishment of satisfactory hydrodynamic regime in enzyme reactors. This is a good recommendation for their wide application in enzyme immobilization after finding the most favorable immobilization method. Methods for enzyme immobilization that have been previously reported as efficient, considering the obtained activity of immobilized enzyme are presented: direct binding to polymers via their epoxy groups, binding to polymers via a spacer made from ethylene diamine/glutaraldehyde, and coupling the periodate-oxidized sugar moieties of the enzymes to the polymer beads.

Influence of process parameters on the photodegradation of synthesized azo pyridone dye in TiO2 water suspension under simulated sunlight.

Photocatalytic degradation of synthesized azo pyridone dye (5-(4-sulpho phenylazo)-6-hydroxy-4-methyl-3-cyano-2-pyridone), in aqueous solutions by simulated sunlight in the presence of commercial TiO(2), Aeroxide P25, was studied. The reaction kinetics analysis showed that photodegradation exhibits pseudo first-order kinetics according to Langmuir-Hinshelwood model. The effects of various process parameters on the photocatalytic degradation were investigated. The optimal catalyst content and pH were determined. A decrease in the reaction rate was observed upon the increase of the initial dye concentration. Degradation of the dye was enhanced by hydrogen peroxide, but it was inhibited by ethanol. The influence of temperature was studied, and the energy of activation was determined. According to total organic carbon (TOC) analysis, 54% of TOC remained when 100% of the dye was decolorized. Although the intermediates were not determined in this study, the TOC results clearly indicate their presence during the reaction. In addition, photocatalytic degradation of simulated dyehouse effluents, containing tested azo pyridone dye and associated auxiliary chemicals was investigated.

Use of Candida rugosa lipase immobilized on sepabeads for the amyl caprylate synthesis: batch and fluidized bed reactor study

Lipase from Candida rugosa was covalently immobilized on Sepabeads EC-EP for application for amyl caprylate synthesis in an organic solvent system. Several solvents were tested in terms of biocatalyst stability and the best result was obtained with isooctane. The lipase-catalyzed esterification in the selected system was performed in batch and fluidized bed reactor systems. The influence of several important reaction parameters including temperature, initial water content, enzyme loading, acid/alcohol molar ratio, and time of addition of molecular sieves is carefully analyzed by means of an experimental design. Almost complete conversion (> 99 percent) of the substrate to ester could be performed in a batch reactor system, using lipase loading as low as 37 mg g-1 dry support and in a relatively short time (24 hrs) at 37°C, when high initial substrate molar ratio of 2.2 is used. Kinetics in a fluidized bed reactor system seems to still have a slightly better profile than in the batch system (90.2 percent yields after 14 hrs). The fluidized bed reactor operated for up 70 hrs almost with no loss in productivity, implying that the proposed process and the immobilized system could provide a promising approach for the amyl caprylate synthesis at the industrial scale.

A QSAR study of acute toxicity of N-substituted fluoroacetamides to rats.

Acute toxicity in vivo toward rats, of nineteen N-alkyl and N-cycloalkyl fluorocetamides [F-CH(2)-C(O)-NH-R] was correlated with their structure-dependent properties. Used descriptors are: molecular weights (M(w)) and heat of formation (DeltaH(f)) of compounds; molar refractivity (CMR), lipophilicity (ClogP), Broto lipol values, virtual logP, molecular lipophilic potential (MLP), Van der Waals surfaces (VdW SAS) and hydropathicity surface (ILM) of whole molecules; Taft steric parameters (E(s)); E(s) values with Hancock corrections (E(s)(CH)) and Verloop sterimol (B(5)) and (L) parameters of alkyl and cycloalkyl residues; superdelocalizabilities and electron densities on the [NH-C(O)-CH(2)-F] fragment. Strong quantitative structure-activity relationships were assessed. Obtained correlation suggested that lipophilicity, shape and bulkiness of the alkyl and cycloalkyl substituents, particular nearest vicinity of the amide nitrogen, as well charges on the amide moiety are the main factors that influence on the acute toxicity of studied compounds toward rats. Mechanism of toxic action was proposed.