SARS-CoV-2 Impact on Red Blood Cell Morphology.

Severe COVID-19 alters the biochemical and morphological characteristics of blood cells in a wide variety of ways. To date, however, the vast majority of research has been devoted to the study of leukocytes, while erythrocyte morphological changes have received significantly less attention. The aim of this research was to identify erythrocyte morphology abnormalities that occur in COVID-19, compare the number of different poikilocyte types, and measure erythrocyte sizes to provide data on size dispersion. Red blood cells obtained from 6 control donors (800-2200 cells per donor) and 5 COVID-19 patients (800-1900 cells per patient) were examined using low-voltage scanning electron microscopy. We did not discover any forms of erythrocyte morphology abnormalities that would be specific to COVID-19. Among COVID-19 patients, we observed an increase in the number of acanthocytes (p = 0.01) and a decrease in the number of spherocytes (p = 0.03). In addition, our research demonstrates that COVID-19 causes an increase in the median (p = 0.004) and interquartile range (p = 0.009) when assessing erythrocyte size. The limitation of our study is a small number of participants.

Diagnosis of Prostate Cancer through the Multi-Ligand Binding of Prostate-Derived Extracellular Vesicles and miRNA Analysis.

BACKGROUND: The development of new non-invasive markers for prostate cancer (PC) diagnosis, prognosis, and management is an important issue that needs to be addressed to decrease PC mortality. Small extracellular vesicles (SEVs) secreted by prostate gland or prostate cancer cells into the plasma are considered next-generation diagnostic tools because their chemical composition might reflect the PC development. The population of plasma vesicles is extremely heterogeneous. The study aimed to explore a new approach for prostate-derived SEV isolation followed by vesicular miRNA analysis. METHODS: We used superparamagnetic particles functionalized by five types of DNA-aptamers binding the surface markers of prostate cells. Specificity of binding was assayed by AuNP-aptasensor. Prostate-derived SEVs were isolated from the plasma of 36 PC patients and 18 healthy donors and used for the assessment of twelve PC-associated miRNAs. The amplification ratio (amp-ratio) value was obtained for all pairs of miRNAs, and the diagnostic significance of these parameters was evaluated. RESULTS: The multi-ligand binding approach doubled the efficiency of prostate-derived SEVs' isolation and made it possible to purify a sufficient amount of vesicular RNA. The neighbor clusterization, using three pairs of microRNAs (miR-205/miR-375, miR-26b/miR375, and miR-20a/miR-375), allowed us to distinguish PC patients and donors with sensitivity-94%, specificity-76%, and accuracy-87%. Moreover, the amp-ratios of other miRNAs pairs reflected such parameters as plasma PSA level, prostate volume, and Gleason score of PC. CONCLUSIONS: Multi-ligand isolation of prostate-derived vesicles followed by vesicular miRNA analysis is a promising method for PC diagnosis and monitoring.

3D Nanocomposite with High Aspect Ratio Based on Polyaniline Decorated with Silver NPs: Synthesis and Application as Electrochemical Glucose Sensor.

In this paper, we present a new methodology for creating 3D ordered porous nanocomposites based on anodic aluminum oxide template with polyaniline (PANI) and silver NPs. The approach includes in situ synthesis of polyaniline on templates of anodic aluminum oxide nanomembranes and laser-induced deposition (LID) of Ag NPs directly on the pore walls. The proposed method allows for the formation of structures with a high aspect ratio of the pores, topological ordering and uniformity of properties throughout the sample, and a high specific surface area. For the developed structures, we demonstrated their effectiveness as non-enzymatic electrochemical sensors on glucose in a concentration range crucial for medical applications. The obtained systems possess high potential for miniaturization and were applied to glucose detection in real objects-laboratory rat blood plasma.

Tuning the Optical Properties and Conductivity of Bundles in Networks of Single-Walled Carbon Nanotubes.

The films of single-walled carbon nanotubes (SWCNTs) are a promising material for flexible transparent electrodes, which performance depends not only on the properties of individual nanotubes but also, foremost, on bundling of individual nanotubes. This work investigates the impact of densification on optical and electronic properties of SWCNT bundles and fabricated films. Our ab initio analysis shows that the optimally densified bundles, consisting of a mixture of quasi-metallic and semiconducting SWCNTs, demonstrate quasi-metallic behavior and can be considered as an effective conducting medium. Our density functional theory calculations indicate the band curving and bandgap narrowing with the reduction of the distance between nanotubes inside bundles. Simulation results are consistent with the observed conductivity improvement and shift of the absorption peaks in SWCNT films densified in isopropyl alcohol. Therefore, not only individual nanotubes but also the bundles should be considered as building blocks for high-performance transparent conductive SWCNT-based films.

Direct Laser Writing of Copper Micropatterns from Deep Eutectic Solvents Using Pulsed near-IR Radiation.

In this study, we developed a method for the fabrication of electrically conductive copper patterns of arbitrary topology and films on dielectric substrates, by improved laser-induced synthesis from deep eutectic solvents. A significant increase in the processing efficiency was achieved by acceptor substrate pretreatment, with the laser-induced microplasma technique, using auxiliary glass substrates and optional laser post-processing of the recorded structures; thus, the proposed approach offers a complete manufacturing cycle, utilizing a single, commercially available, pulsed Yb fiber laser system. The potential implications of the presented research are amplified by the observation of laser-induced periodic surface structures (LIPSSs) that may be useful for the further tuning of tracks' functional properties.

Phylogenetic position and morphology of Raphidiophrys elongata sp. nov. (Haptista: Centroplasthelida) with notes on cyst wall structure and evolution.

The majority of centrohelids bear external coverings consisting of organic spicules or siliceous scales. Cyst coverings are usually reinforced with additional layers of modified scales. The cyst wall of Raphidiophrys heterophryoidea has an unusual and complex structure. It consists of three different types of scales and includes the mosaic scale layer not known in other centrohelids. During excystment, the cyst wall fragments along the sutures of the mosaic layer. For other Raphidiophrys species, cyst coverings are not studied. The present paper describes a new Raphidiophrys species, R. elongata, belonging to the NC7 environmental clade. Trophozoites bore thin plate scales with reduced upper plate. Under starvation, cysts emerged in clonal cultures. Cyst coverings of R. elongata and R. heterophryoidea were studied in comparison with the use of FIB-SEM. Cyst wall of R. elongata was significantly thinner than in R. heterophryoidea and was formed with 3-5 layers of uniform overlapping scales. No mosaic scale layer was present. During excystment, trophozoite exited cyst shell through random fissure. Possible evolutionary events and driving forces behind the complication of cyst wall within Raphidiophrys were discussed.

Optical Studies and Transmission Electron Microscopy of HgCdTe Quantum Well Heterostructures for Very Long Wavelength Lasers.

HgTe/CdHgTe quantum well (QW) heterostructures have attracted a lot of interest recently due to insights they provided towards the physics of topological insulators and massless Dirac fermions. Our work focuses on HgCdTe QWs with the energy spectrum close to the graphene-like relativistic dispersion that is supposed to suppress the non-radiative Auger recombination. We combine various methods such as photoconductivity, photoluminescence and magneto-optical measurements as well as transmission electron microscopy to retrofit growth parameters in multi-QW waveguide structures, designed for long wavelengths lasing in the range of 10-22 µm. The results reveal that the attainable operating temperatures and wavelengths are strongly dependent on Cd content in the QW, since it alters the dominating recombination mechanism of the carriers.

Bright Single-Photon Emitters with a CdSe Quantum Dot and Multimode Tapered Nanoantenna for the Visible Spectral Range.

We report on single photon emitters for the green-yellow spectral range, which comprise a CdSe/ZnSe quantum dot placed inside a semiconductor tapered nanocolumn acting as a multimode nanoantenna. Despite the presence of many optical modes inside, such a nanoantenna is able to collect the quantum dot radiation and ensure its effective output. We demonstrate periodic arrays of such emitters, which are fabricated by focused ion beam etching from a II-VI/III-V heterostructure grown using molecular beam epitaxy. With non-resonant optical pumping, the average count rate of emitted single photons exceeds 5 MHz with the second-order correlation function g(2)(0) = 0.25 at 220 K. Such single photon emitters are promising for secure free space optical communication lines.

Room-Temperature Lasing from Mie-Resonant Nonplasmonic Nanoparticles.

Subwavelength particles supporting Mie resonances underpin a strategy in nanophotonics for efficient control and manipulation of light by employing both an electric and a magnetic optically induced multipolar resonant response. Here, we demonstrate that monolithic dielectric nanoparticles made of CsPbBr3 halide perovskites can exhibit both efficient Mie-resonant lasing and structural coloring in the visible and near-IR frequency ranges. We employ a simple chemical synthesis with nearly epitaxial quality for fabricating subwavelength cubes with high optical gain and demonstrate single-mode lasing governed by the Mie resonances from nanocubes as small as 310 nm by the side length. These active nanoantennas represent the most compact room-temperature nonplasmonic nanolasers demonstrated until now.

Heterogeneity of the nucleic acid repertoire of plasma extracellular vesicles demonstrated using high-sensitivity fluorescence-activated sorting.

The aim of this study was to investigate cell source-dependent nucleic acids repertoire of diverse subpopulations of plasma extracellular vesicles (EVs). Blood plasma from nine healthy volunteers was used for the analysis. Samples of EVs were obtained by differential centrifugation of plasma. The application of high-sensitivity fluorescence-activated vesicles sorting (hs-FAVS) using fluorophore-conjugated anti-CD41-FITC (Fluorescein isothiocyanate) and anti-CD235a-PE antibodies allowed the isolation of three subpopulations of EVs, namely CD41+ CD235a-, CD41-CD235a+ and CD41-CD235a dim. The high purity (>97%) of the sorted subpopulations was verified by high-sensitivity flow cytometry. Presence of nanosized objects in sorted samples was confirmed by combination of low-voltage scanning electron microscopy and dynamic light scattering. The amount of material in sorted samples was enough to perform Quantitative polymerase chain reaction (qPCR)-based nucleic acid quantification. The most prominent differences in the nucleic acid repertoire were noted between CD41+ CD235- vs. CD41-CD235a+ vesicles: the former contained significantly (p = 0.004) higher amount of mitochondrial DNA, and platelet enriched miR-21-5p (4-fold), miR-223-3p (38-fold) and miR-199a-3p (187-fold), but lower amount of erythrocyte enriched miR-451a (90-fold). CD41-CD235a+ and CD41-CD235a dim vesicles differed in levels of miR-451a (p = 0.016) and miR-21-5p (p = 0.031). Nuclear DNA was below the limit of detection in all EV subpopulations. The hs-FCM-based determination of the number of sorted EVs allowed the calculation of per single-event miRNA concentrations. It was demonstrated that the most abundant marker in CD41+ CD235a- subpopulation was miR-223-3p, reaching 38.2 molecules per event. In the CD41-CD235+ subpopulation, the most abundant marker was miR-451a, reaching 24.7 molecules per event. Taken together, our findings indicate that erythrocyte- and platelet-derived EVs carry different repertoires of nucleic acids, which were similar to the composition of their cellular sources.

Application of high-sensitivity flow cytometry in combination with low-voltage scanning electron microscopy for characterization of nanosized objects during platelet concentrate storage.

Platelet concentrates are used in clinic for therapy and prophylaxis of conditions associated with platelet deficiency or malfunction. The characteristics of platelet concentrates gradually change during pretransfusion storage, affecting their clinical effectiveness and the risk of adverse transfusion reactions. The presence of platelet-derived membrane vesicles is an important characteristic of platelet concentrates. Due to their functionality, changes in the number and molecular compositions of platelet-derived vesicles have major effects on the clinical properties of platelet preparations. The existence of different subpopulations of membrane vesicles requires analytical methods capable of providing information at the individual vesicle level. Such methods include flow cytometry and electron microscopy. However, conventional flow cytometry has certain limitations, since the diameters of many platelet-derived membrane vesicles are smaller than its detection limit. The use of classical scanning electron microscopy is also limited due to the requirement for coating with a layer of conductive material, which impedes the detection of small extracellular vesicles. Here, a combination of high-sensitivity flow cytometry and low-voltage scanning electron microscopy was used to increase sensitivity and resolution in the detection of nanosized objects present in platelet concentrates during storage. Apheresis platelet concentrates from eight healthy adult donors were investigated on days 2 and 7 of storage. Fractions of nanosized objects were obtained by differential centrifugation. Fluorophore-conjugated antibodies were used to detect marker-positive vesicles derived from platelets (CD41), red blood cells (CD235a), leukocytes (CD45), and endothelial cells (VEGFR2). Near-spherical objects with diameters ranging from 25 to 700 nm were observed by low-voltage scanning electron microscopy in platelet concentrates and its fractions. On day 7 of storage, objects with diameters of less than 100 nm were attached to and clustered near the terminal ends of pseudopod-like projections. High-sensitivity flow cytometry showed that during storage numbers of CD41(pos) vesicles elevated more than fivefold and numbers of marker-negative nanosized objects, which did not carry any of the investigated cell type-specific markers elevated more than twofold. Major changes in both CD41(pos) vesicles and marker-negative nanosized objects abundances were observed for objects with diameters around 100 nm bead equivalents. Overall, these results emphasized the importance of application of high-sensitivity methods for monitoring the characteristics of cell-derived nanosized objects during platelet concentrate storage.

Interface-Assisted Synthesis of the Mn3-xFexO4 Gradient Film with Multifunctional Properties.

Anisotropic gradient materials are considered as promising and novel in that they have numerous functional properties and are able to transform into hierarchical microstructures. We report a facile method of gradient inorganic thin film synthesis through diffusion-controlled deposition at the gas-solution interface. To investigate the reaction of interfacial phase boundary controllable hydrolysis by gaseous ammonium, an aqueous solution of FeCl3 and MnCl2 was chosen, as the precipitation pH values for the hydroxides of these metals differ gradually. As a result of synthesis using the gas-solution interface technique (GSIT), a thin film is formed on the surface of the solution that consists of Mn2+(Fe,Mn)23+O4 nanoparticles with hausmannite crystal structure. The ratio between iron and manganese in the film can be adjusted over a wide range by varying the synthetic procedure. Specific conditions are determined that allow the formation of a Mn-Fe mixed oxide film with a gradient of composition, morphology, and properties, as well as its further transformation into microscrolls with a diameter of 10-20 µm and a length of up to 300 µm, showing weak superparamagnetic properties. The technique reported provides a new interfacial route for the development of functional gradient materials with tubular morphology.

Nanosecond-Laser Generation of Nanoparticles in Liquids: From Ablation through Bubble Dynamics to Nanoparticle Yield.

A comprehensive picture of the nanosecond-laser generation of colloidal nanoparticles in liquids is nowadays the demand of their high-throughput industrial fabrication for diverse perspective biomedical, material science, and optoelectronic applications. In this study, using silicon as an example, we present a self-consistent experimental visualization and theoretical description of key transient stages during nanosecond-laser generation of colloidal nanoparticles in liquids: plasma-mediated injection of ablated mass into the liquid and driving the vapor bubble, finalized by the colloid appearance in the liquid. The explored fundamental transient stages envision the basic temporal and spatial scales, as well as laser parameter windows, for the demanded high-throughput nanosecond-laser generation of colloidal nanoparticles in liquids.

Nanoporous water oxidation electrodes with a low loading of laser-deposited Ru/C exhibit enhanced corrosion stability.

For the oxidation of water to dioxygen, oxide-covered ruthenium metal is known as the most efficient catalyst, however, with limited stability. Herein, we present a strategy for incorporating a Ru/C composite onto a novel nanoporous electrode surface with low noble metal loading and improved stability. The Ru/C is coated on the pore walls of anodic alumina templates in a one-step laser-induced deposition method from Ru3(CO)12 solutions. Scanning electron microscopy proves the presence of a continuous Ru/C layer along the inner pore walls. The amorphous material consists of metallic Ru incorporated in a carbonaceous C matrix as shown by X-ray diffraction combined with Raman and X-ray photoelectron spectroscopies. These porous electrodes reveal enhanced stability during water oxidation as compared to planar samples at pH 4. Finally, their electrocatalytic performance depends on the geometric parameters and is optimized with 13 µm pore length, which yields 2.6 mA cm-2, or 49 A g-1, at η = 0.20 V.

Highly Reversible Water Oxidation at Ordered Nanoporous Iridium Electrodes Based on an Original Atomic Layer Deposition.

Nanoporous iridium electrodes are prepared and electrochemically investigated towards the water oxidation (oxygen evolution) reaction. The preparation is based on 'anodic' aluminum oxide templates, which provide straight, cylindrical nanopores. Their walls are coated using atomic layer deposition (ALD) with a newly developed reaction which results in a metallic iridium layer. The ALD film growth is quantified by spectroscopic ellipsometry and X-ray reflectometry. The morphology and composition of the electrodes are characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction. Their catalytic activity is quantified for various pore geometries by cyclic voltammetry, steady-state electrolysis, and electrochemical impedance spectroscopy. With an optimal pore length of L≈17-20 µm, we achieve current densities of J=0.28 mA cm-2 at pH 5 and J=2.4 mA cm-2 at pH 1. This platform is particularly competitive for achieving moderate current densities at very low overpotentials, that is, for a high degree of reversibility in energy storage.

Copper-Stabilized Si/Au Nanowhiskers for Advanced Nanoelectronic Applications.

We report here the growth and functional properties of silicon-based nanowhisker (NW) diodes produced by the vapor-liquid-solid process using a pulsed laser deposition technique. For the first time, we demonstrate that this method could be employed to control the size and shape of silicon NWs by using a two-component catalyst material (Au/Cu ≈ 60:1). During the NW growth, copper is distributed on the outer surface of the NW, whereas gold sticks as a droplet to its top. The length of NWs is defined by the total amount of copper in the catalyst alloy droplet. The measurements of the electrical transport properties revealed that in contact with the substrate, individual NWs demonstrate typical I-V diode characteristics. Our approach can become an important new tool in the design of novel electronic components.