ABSTRACT
The hydrophobic azo dye 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR, H2L) was studied as part of a system for the centrifuge-less cloud point extraction (CL-CPE) and spectrophotometric determination of traces of cobalt. The extracted 1:2 (Co:HTAR) complex, [CoIII(HL-)(L2-)]0, shows an absorption maximum at 553 nm and contains HTAR in two different acid-base forms. Optimum conditions for its formation and CL-CPE were found as follows: 1 × 10-5 mol L-1 of HTAR, 1.64% of Triton X-114, pH of 7.8, incubation time of 20 min at ca. 50 °C, and cooling time of 30 min at ca. -20 °C. The linear range, limit of detection, and apparent molar absorptivity coefficient were 5.4-189 ng mL-1, 1.64 ng mL-1, and 2.63 × 105 L mol-1 cm-1, respectively. The developed procedure does not use any organic solvents and can be described as simple, cheap, sensitive, convenient, and environmentally friendly. It was successfully applied to the analysis of artificial mixtures and real samples, such as steel, dental alloy, rainwater, ampoules of vitamin B12, and saline solution for intravenous infusion.
Subject(s)
Azo Compounds , Cobalt , Azo Compounds/chemistry , Cobalt/analysis , Solvents/chemistry , Spectrophotometry/methodsABSTRACT
A simple, cheap, and environmentally friendly centrifuge-less cloud point extraction procedure was developed for the preconcentration of traces of Cu(II) before its spectrophotometric determination. It is based on a complexation reaction with the hydrophobic azo reagent 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR), in which a complex with a stoichiometric ratio of 1:1 and an absorption maximum at 535 nm is formed. The experimental conditions for Cu(II) determination were found: HTAR concentration (8 × 10-6 mol mL-1), mass fraction of the surfactant Triton X-114 (2.2%), pH (5.9, ammonium acetate buffer), and incubation time (10 min at 60 °C). The linear range, limit of detection, molar absorption coefficient and preconcentration factor were calculated to be 4.5-254 ng mL-1, 1.34 ng mL-1, 2.54 × 105 L mol-1 cm-1, and 10, respectively. The effect of foreign ions was studied, and the proposed procedure was applied to the analysis of water samples and a saline solution for intravenous infusion.
Subject(s)
Copper , Polyethylene Glycols , Azo Compounds , Resorcinols , SpectrophotometryABSTRACT
The quaternary ammonium salt Aliquat 336 (A336; R4N+Cl-) and the azo dye 4-(2-thiazolylazo)orcinol (ТÐÐ) were examined as constituents of a water-isobutanol extraction-chromogenic system for vanadium(V). Under the optimum conditions (cTAO = 1.6´10-3 mol dm-3, cA336 = 1.3´10-2 mol dm-3 and pH 5.0), vanadium(V) is extracted as a ternary complex which can be represented by the formula (R4N+)[VO2(TAO2-)]. The key extraction-spectrophotometric characteristics were determined. The interfering effect of foreign ions was studied as well. The wavelength of maximum absorption (λmax), molar absorptivity (εmax), constant of extraction (Kex) and fraction extracted (E) were found to be λ = 547 nm, ε = 3.1×104 dm3 mol-1 cm-1, Log Kex = 2.8 and E = 90.2%, respectively. Beer's law was obeyed in the range of 0.084-2.0 mg cm-3 and the limit of detection was 25 ng cm-3 of vanadium(V).
