Surfactant-Mediated and Morphology-Controlled Nanostructured LiFePO4/Carbon Composite as a Promising Cathode Material for Li-Ion Batteries.

The synthesis of morphology-controlled carbon-coated nanostructured LiFePO4 (LFP/Carbon) cathode materials by surfactant-assisted hydrothermal method using block copolymers is reported. The resulting nanocrystalline high surface area materials were coated with carbon and designated as LFP/C123 and LFP/C311. All the materials were systematically characterized by various analytical, spectroscopic and imaging techniques. The reverse structure of the surfactant Pluronic® 31R1 (PPO-PEO-PPO) in comparison to Pluronic® P123 (PEO-PPO-PEO) played a vital role in controlling the particle size and morphology which in turn ameliorate the electrochemical performance in terms of reversible specific capacity (163 mAh g-1 and 140 mAh g-1 at 0.1 C for LFP/C311 and LFP/C123, respectively). In addition, LFP/C311 demonstrated excellent electrochemical performance including lower charge transfer resistance (146.3 Ω) and excellent cycling stability (95 % capacity retention at 1 C after 100 cycles) and high rate capability (163.2 mAh g-1 at 0.1 C; 147.1 mAh g-1 at 1 C). The better performance of the former is attributed to LFP nanoparticles (<50 nm) with a specific spindle-shaped morphology. Further, we have also evaluated the electrode performance with the use of both PVDF and CMC binders employed for the electrode fabrication.

Defect induced electronic states and magnetism in ball-milled graphite.

The electronic structure and magnetism of nanocrystalline graphite prepared by ball milling of graphite in an inert atmosphere have been investigated using valence band spectroscopy (VB), core level near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and magnetic measurements as a function of the milling time. The NEXAFS spectroscopy of graphite milled for 30 hours shows simultaneous evolution of new states at ~284.0 eV and at ~290.5 eV superimposed upon the characteristic transitions at 285.4 eV and 291.6 eV, respectively. The modulation of the density of states is explained by evolution of discontinuities within the sheets and along the fracture lines in the milled graphite. The magnetic measurements in the temperature interval 2-300-2 K at constant magnetic field strength show a correlation between magnetic properties and evolution of the new electronic states. With the reduction of the crystallite sizes of the graphite fragments, the milled material progressively changes its magnetic properties from diamagnetic to paramagnetic with contributions from both Pauli and Curie paramagnetism due to the evolution of new states at ~284 and ~290.5 eV, respectively. These results indicate that the magnetic behaviour of ball-milled graphite can be manipulated by changing the milling conditions.

Isothermal evaporation of ethanol in a dynamic gas atmosphere.

Optimization of evaporation and pyrolysis conditions for ethanol are important in carbon nanotube (CNT) synthesis. The activation enthalpy (ΔH(‡)), the activation entropy (ΔS(‡)), and the free energy barrier (ΔG(‡)) to evaporation have been determined by measuring the molar coefficient of evaporation, k(evap), at nine different temperatures (30-70 °C) and four gas flow rates (25-200 mL/min) using nitrogen and argon as carrier gases. At 70 °C in argon, the effect of the gas flow rate on k(evap) and ΔG(‡) is small. However, this is not true at temperatures as low as 30 °C, where the increase of the gas flow rate from 25 to 200 mL/min results in a nearly 6 times increase of k(evap) and decrease of ΔG(‡) by ~5 kJ/mol. Therefore, at 30 °C, the effect of the gas flow rate on the ethanol evaporation rate is attributed to interactions of ethanol with argon molecules. This is supported by simultaneous infrared spectroscopic analysis of the evolved vapors, which demonstrates the presence of different amounts of linear and cyclic hydrogen bonded ethanol aggregates. While the amount of these aggregates at 30 °C depends upon the gas flow rate, no such dependence was observed during evaporation at 70 °C. When the evaporation was carried out in nitrogen, ΔG(‡) was almost independent of the evaporation temperature (30-70 °C) and the gas flow rate (25-200 mL/min). Thus the evaporation of ethanol in a dynamic gas atmosphere at different temperatures may go via different mechanisms depending on the nature of the carrier gas.

Unoccupied electronic structure of ball-milled graphite.

Changes in electronic and vibrational structure of well characterised macrocrystalline graphite milled by a planetary ball-mill are investigated by Raman spectroscopy and Near Edge X-ray Absorption Fine structure (NEXAFS) measurements at the C K-edge. The electronic structure changes at the surface and in the sub-surface of the particles are examined by comparing two-different NEXAFS detection modes: total fluorescence yield (TFY) and partial electron yield (PEY) respectively. When the in-plane crystallite sizes of graphite are decreased to nanosized (from approximately 160 nm to approximately 9 nm), a new spectral structure appears in TFY at 284.1 eV which is not present in the macrocrystalline graphite. This feature is assigned to electronic states associated with zigzag edges. Further the TFY shows a shift of the main graphite pi* band from 285.5 to 285.9 eV, attributed to breaking the conjugation and hence the electron localization effect during milling, The TFY spectra also show strong spectral features at 287.5 and 288.6 eV, which suggest that the local environment of carbon atoms changes from sp(2) to more sp(3) due to physical damage of the graphite sheets and formation of structures other than aromatic hexagons. Complementary Raman spectroscopic measurements demonstrate an up-shift of the graphite G band from 1575 to 1583 cm(-1)en route to nanosize. The changes in TFY NEXAFS and Raman spectra are attributed to modification of the sub-surface electronic structure due to the presence of defects in the graphite crystal produced during milling. The discovery of the strong spectral feature at 284.1 eV in nanographite and the 0.4 eV up-shift of the pi* band may open up possibilities to influence the electronic transport properties of graphite by manipulation of defects during the preparation of the nanographite.

Interactions of sodium montmorillonite with poly(acrylic acid).

The chemical-structural modifications of the natural clay sodium montmorillonite during interaction with poly(acrylic acid) were studied mainly by X-ray photoemission spectroscopy. Samples of modified montmorillonite were prepared from the reaction of sodium montmorillonite ( approximately 0.5 g) and an aqueous solution of poly(acrylic acid) (pH approximately 1.8, 50 g) at varying temperatures. X-ray diffraction indicated that the montmorillonite interlayer space ( approximately 13 A), formed by regular stacking of the silicate layers (dimension approximately 1x1000 nm), expanded to approximately 16 A as the reaction was carried out at room temperature and at 30 degrees C. At 60 degrees C, the interlayer space further expanded to approximately 20 A. The results of X-ray photoemission spectroscopy indicated that poly(acrylic acid) molecules exchange sodium ions on the surface of the silicate layers. These combined results allowed development of a reaction model that explains the dependency of the interlayer expansion with temperature. Information concerning the surface chemical reactions and systematic increases in the interlayer distances is particularly useful if montmorillonite and poly(acrylic acid) are to be used for formation of nanocomposite materials.

Precursor decomposition and nucleation kinetics during platelike apatite synthesis.

Self-organization of calcium and phosphorus precursors in solution containing acetic acid and ethylene glycol produces a nanosized lamellar acetate-phosphonate hybrid containing two acetate and one phosphonate components. The lamellar morphology of the hybrid precursor is responsible the formation of platelike apatite product after thermal treatment at or above 400 degrees C. However a preliminary preheating stage (300 degrees C, 24 h) is crucial in determining the morphology of the apatite. Activation energy measurements by nonisothermal thermogravimetric analysis show that decomposition of the hybrid precursor involves at least two steps. Among the three components, it appears that the calcium acetate bidentate chelate component is stable below or at 300 degrees C. However, the calcium phosphonate and calcium acetate monodentate components are decomposed at this temperature. Above 360 degrees C, nuclear magnetic resonance and infrared spectroscopic data reveal the decomposition of more stable calcium acetate bidentate chelate. It is evident that the bond rupture of the bidentate calcium acetate species in the precursor results in the start of crystalline apatite formation but the other components must be decomposed by heating prior to this critical step in order to produce platelike apatite.