A "Solution" for Patients Unable to Swallow a Pill: Crushed Terbinafine Mixed With Syrup.

Because oral terbinafine is now formulated only as a tablet, there is a barrier to treatment of superficial fungal infections in patients who are unable to swallow a pill such as young children and patients with pill dysphagia. We describe a preparation method that allows this population to safely and effectively use oral terbinafine.

Acral Fibrochondromyxoid Tumor Presenting as Enlarging Nodule Involving the Distal Fingertip and Hyponychium: A Case Report.

An acral fibrochondromyxoid tumor is a newly described type of benign soft tissue neoplasm that presents as a single nodular lesion on a finger or toe. There has only been one previous report on this tumor, a case series that described the initial pathologic and clinical findings; however, details on clinical history, physical examination, and outcome are unknown. In this report, we describe a case of a 39-year-old male who presented with a painful enlarging mass involving the distal right 3rd finger and hyponychium. Punch biopsy was performed and the lesion was identified as an acral fibrochondromyxoid tumor on microscopic examination. X-ray showed no bony involvement. The tumor was successfully excised with complete resolution of pain symptoms. We discuss the clinical features and immunohistochemistry findings of our case in the context of the current limited knowledge about this very rare tumor.

Mid-Flexion Instability After Total Knee Arthroplasty: Diagnosis, Implant Design, and Outcomes.

Mid-flexion instability (MFI) in total knee arthroplasty refers to a distinct clinical entity where the knee is stable at full extension and 90° of flexion, but unstable somewhere between these 2 points. The presentation of MFI is often vague, and studies defining objective clinical or intraoperative measurements are limited. In this review, we aim to properly define the condition, describe diagnostic criteria and risk factors contributing to MFI, review current implant design, and present outcomes of revision surgery performed for MFI. [Orthopedics. 2023;46(1):e13-e19.].

Treatment of Fingernail Onychomycosis with Efinaconazole 10% Solution in a Patient with Scleroderma: A Case Report.

Introduction: Oral antifungals are typically preferred over topicals for moderate to severe onychomycosis due to efficacy and shorter treatment courses. However, systemics are contraindicated or cautioned in patients with liver dysfunction and with some autoimmune diseases, and in those taking interacting medications. Efinaconazole 10% solution is a topical antifungal therapy, but application for fingernail onychomycosis has not been adequately studied. Case Presentation: We present a case of a 78-year-old female with scleroderma and moderate onychomycosis of the right 4th fingernail successfully treated with topical efinaconazole 10% solution. Conclusion: We review the literature on contraindications to oral antifungals for onychomycosis, precautions with terbinafine in patients with some autoimmune diseases, and topical onychomycosis therapies. Topical efinaconazole may represent an effective alternative for patients with fingernail onychomycosis who have contraindications to oral medications.

Educational assortative mating and time use in the home.

This study examines the association between individuals' educational assortative mating and time spent on child care and housework. Focus is put on hypogamous couples, or couples in which wives have more education than their husbands. Relative resources and gender revolution frameworks are considered as contexts to explain why hypogamous couples may share their time differently than other couples. A series of ordinary least squares regressions with population and sampling weights are employed using American Time Use Survey data from 2003 to 2018. Three, separate analyses using relative education, gender, and all educational pairings as the independent variables of interest are presented with child care and housework as the dependent variables. The current findings show that men in hypogamous marriages perform about 10 min more of child care per day on average than their peers in hypergamous and homogamous marriages, and that this comes primarily from basic care activities. This accounts for approximately 43% of the difference between men and women in the average amount of time spent on child care. No clear pattern of significance is apparent comparing individuals' time spent on housework by relative education, suggesting that housework and child care have evolved differently in the context of gendered domestic responsibilities. Men in hypogamous marriages are more egalitarian in their sharing of child care. However, this is only true for couples in which men have at least a high school diploma and women are highly educated.

A Novel MRI Tool for Evaluating Cortical Bone Thickness of the Proximal Femur.

BACKGROUND: Osteoporotic hip fractures heavily cost the health care system. Clinicians and patients can benefit from improved tools to assess bone health. Herein, we aim to develop a three-dimensional magnetic resonance imaging (MRI) method to assess cortical bone thickness and assess the ability of the method to detect regional changes in the proximal femur. METHODS: Eighty-nine patients underwent hip magnetic resonance imaging. FireVoxel and 3DSlicer were used to generate three-dimensional proximal femur models. ParaView was used to define five regions: head, neck, greater trochanter, intertrochanteric region, and subtrochanteric region. Custom software was used to calculate the cortical bone thickness and generate a color map of the proximal femur. Mean cortical thickness values for each region were calculated. Statistical t-tests were performed to evaluate differences in cortical thickness based on proximal femur region. Measurement reliability was evaluated using coefficient of variation, intraclass correlation coefficients, and overlap metrics. RESULTS: Three-dimensional regional cortical thickness maps for all subjects were generated. The subtrochanteric region was found to have the thickest cortical bone and the femoral head had the thinnest cortical bone. There were statistically significant differences between regions (p < 0.01) for all possible comparisons. CONCLUSIONS: Cortical bone is an important contributor to bone strength, and its thinning results in increased hip fracture risk. We describe the development and measurement reproducibility of an MRI tool permitting assessment of proximal femur cortical thickness. This study represents an important step toward longitudinal clinical trials interested in monitoring the effectiveness of drug therapy on proximal femur cortical thickness.

The reproducibility of measuring trabecular bone parameters using a commercially available high-resolution magnetic resonance imaging approach: A pilot study.

Bone imaging is currently the best non-invasive way to assess changes to bone associated with aging or chronic disease. However, common imaging techniques such as dual energy x-ray absorptiometry are associated with limitations. Magnetic resonance imaging (MRI) is a radiation-free technique that can measure bone microarchitecture. However, published MRI bone assessment protocols use specialized MRI coils and sequences and therefore have limited transferability across institutions. We developed a protocol on a Siemens 3 Tesla MRI machine, using a commercially available coil (Siemens 15 CH knee coil), and manufacturer supplied sequences to acquire images at the tibia. We tested the reproducibility of the FSE and the GE Axial sequences and hypothesized that both would generate reproducible trabecular bone parameters. Eight healthy adults (age 25.5 ±â€¯5.4 years) completed three measurements of each MRI sequence at the tibia. Each of the images was processed for 8 different bone parameters (such as volumetric bone volume fraction). We computed the coefficient of variation (CV) and intraclass correlation coefficients (ICC) to assess reproducibility and reliability. Both sequences resulted in trabecular parameters that were reproducible (CV <5% for most) and reliable (ICC >80% for all). Our study is one of the first to report that a commercially available MRI protocol can result in reproducible data, and is significant as MRI may be an accessible method to measure bone microarchitecture in clinical or research environments. This technique requires further testing, including validation and evaluation in other populations.

Magnetic resonance imaging based assessment of bone microstructure as a non-invasive alternative to histomorphometry in patients with chronic kidney disease.

BACKGROUND: Chronic kidney disease (CKD) adversely affects bone microarchitecture and increases fracture risk. Historically, bone biopsy has been the 'gold standard' for evaluating renal bone disease but is invasive and infrequently performed. High-resolution magnetic resonance imaging (MRI) quantifies bone microarchitecture noninvasively. In patients with CKD, it has not been compared with results derived from bone biopsy or with imaging using dual energy X-ray absorptiometry (DXA). METHODS: Fourteen patients with end-stage kidney disease (ESKD) underwent MRI at the distal tibia, bone mineral density (BMD) by dual energy X-ray absorptiometry (DXA; hip and spine) and transiliac bone biopsies with histomorphometry and microcomputed tomography (micro-CT). All patients had biomarkers of mineral metabolism. Associations were determined by Spearman's or Pearson's rank correlation coefficients. RESULTS: MRI indices of trabecular network integrity, surface to curve ratio (S/C) and erosion index (EI), correlated to histomorphometric trabecular bone volume (S/C r = 0.85, p = 0.0003; EI r = -0.82, p = 0.001), separation (S/C r = -0.58, p = 0.039; EI r = 0.79, p = 0.0012) and thickness (S/C, r = 0.65, p = 0.017). MRI EI and trabecular thickness (TbTh) also correlated to micro-CT trabecular separation (EI r = 0.63, p = 0.02; TbTh r = -0.60, p = 0.02). Significant correlations were observed between histomorphometric mineralization and turnover indices and various MRI parameters. MRI-derived trabecular parameters were also significantly related to femoral neck BMD. CONCLUSIONS: This study highlights the heterogeneity of bone microarchitecture at differing skeletal sites. MRI demonstrates significant, relevant associations to important bone biopsy and DXA indices and warrants further investigation to assess its potential to non-invasively evaluate changes in bone structure and quality over time.

Patient-specific Hip Fracture Strength Assessment with Microstructural MR Imaging-based Finite Element Modeling.

Purpose To describe a nonlinear finite element analysis method by using magnetic resonance (MR) images for the assessment of the mechanical competence of the hip and to demonstrate the reproducibility of the tool. Materials and Methods This prospective study received institutional review board approval and fully complied with HIPAA regulations for patient data. Written informed consent was obtained from all subjects. A nonlinear finite element analysis method was developed to estimate mechanical parameters that relate to hip fracture resistance by using MR images. Twenty-three women (mean age ± standard deviation, 61.7 years ± 13.8) were recruited from a single osteoporosis center. To thoroughly assess the reproducibility of the finite element method, three separate analyses were performed: a test-retest reproducibility analysis, where each of the first 13 subjects underwent MR imaging on three separate occasions to determine longitudinal variability, and an intra- and interoperator reproducibility analysis, where a single examination was performed in each of the next 10 subjects and four operators independently performed the analysis two times in each of the subjects. Reproducibility of parameters that reflect fracture resistance was assessed by using the intraclass correlation coefficient and the coefficient of variation. Results For test-retest reproducibility analysis and inter- and intraoperator analyses for proximal femur stiffness, yield strain, yield load, ultimate strain, ultimate load, resilience, and toughness in both stance and sideways-fall loading configurations each had an individual median coefficient of variation of less than 10%. Additionally, all measures had an intraclass correlation coefficient higher than 0.99. Conclusion This experiment demonstrates that the finite element analysis model can consistently and reliably provide fracture risk information on correctly segmented bone images. © RSNA, 2016 Online supplemental material is available for this article.