Tick-Borne Bacterial Diseases in Europe: Threats to public health.

BACKGROUND: Tick-borne diseases, caused by bacterial pathogens, pose a growing threat to public health in Europe. This paper provides an overview of the historical context of the discovery of the most impactful pathogens transmitted by ticks, including Borrelia burgdorferi sensu lato, Rickettsia spp., Anaplasma spp., Francisella spp., Ehrlichia spp., and Neoehrlichia mikurensis. Understanding the historical context of their discovery provides insight into the evolution of our understanding of these pathogens. METHODS AND RESULTS: Systematic investigation of the prevalence and transmission dynamics of these bacterial pathogens is provided, highlighting the intricate relationships among ticks, host organisms, and the environment. Epidemiology is explored, providing an in-depth analysis of clinical features associated with infections. Diagnostic methodologies undergo critical examination, with a spotlight on technological advancements that enhance detection capabilities. Additionally, the paper discusses available treatment options, addressing existing therapeutic strategies and considering future aspects. CONCLUSIONS: By integrating various pieces of information on these bacterial species, the paper aims to provide a comprehensive resource for researchers and healthcare professionals addressing the impact of bacterial tick-borne diseases in Europe. This review underscores the importance of understanding the complex details influencing bacterial prevalence and transmission dynamics to better combat these emerging public health threats.

Milling and comilling Praziquantel at cryogenic and room temperatures: Assessment of the process-induced effects on drug properties.

This study is a comprehensive evaluation of praziquantel (PZQ) behavior upon grinding considering the influence of milling temperature (cryogenic vs room temperature), frequency and time and presence of polymers (milled raw PZQ vs comilled PZQ/povidone and PZQ/crospovidone at 50:50 w/w) on two experimental responses (residual crystallinity and PZQ recovery). To this aim a full factorial design was set up and the responses of the experimental design were statistically assessed. The powder temperature, measured in different milling conditions, was found to increase with increasing milling frequency and time, up to a maximum recorded value of 46.9 °C (after 90 min at R.T.), for all the three powder systems. When PZQ was ground in RT environment, the recovery was 100%, independently from frequency and time of milling. Its residual crystallinity remained pronounced (>70%) upon milling, even if treated at the most severe conditions. Conversely, when the drug was milled in presence of the polymers, it showed a higher tendency to degradation and amorphysation, independently from the choice of the polymer. The use of cryogenic conditions, operating at temperatures lower than PZQ glass transition, permitted to dramatically reduce PZQ residual crystallinity when the drug was ground by itself. In the case of binary mixtures, the switch to a cryogenic environment did not affect significantly the experimental responses, but permitted to obtain a more predictable trend of both drug recovery and residual crystallinity when varying time and frequency of milling.

In vivo evaluation of thiolated chitosan tablets for oral insulin delivery.

Chitosan-6-mercaptonicotinic acid (chitosan-6-MNA) is a thiolated chitosan with strong mucoadhesive properties and a pH-independent reactivity. This study aimed to evaluate the in vivo potential for the oral delivery of insulin. The comparison of the nonconjugated chitosan and chitosan-6-MNA was performed on several studies such as mucoadhesion, release, and in vivo studies. Thiolated chitosan formulations were both about 80-fold more mucoadhesive compared with unmodified ones. The thiolated chitosan tablets showed a sustained release for 5 h for the polymer of 20 kDa and 8 h for the polymer of 400 kDa. Human insulin was quantified in rats' plasma by means of ELISA specific for human insulin with no cross-reactivity with the endogenous insulin. In vivo results showed thiolation having a tremendous impact on the absorption of insulin. The absolute bioavailabilities were 0.73% for chitosan-6-MNA of 20 kDa and 0.62% for chitosan-6-MNA 400 kDa. The areas under the concentration-time curves (AUC) of chitosan-6-MNA formulations compared with unmodified chitosan were 4.8-fold improved for the polymer of 20 kDa and 21.02-fold improved for the polymer of 400 kDa. The improvement in the AUC with regard to the most promising aliphatic thiomer was up to 6.8-fold. Therefore, chitosan-6-MNA represents a promising excipient for the oral delivery of insulin.

Development of thiolated poly(acrylic acid) microparticles for the nasal administration of exenatide.

The purpose of this study was to develop a microparticulate formulation for nasal delivery of exenatide utilizing a thiolated polymer. Poly(acrylic acid)-cysteine (PAA-cys) and unmodified PAA microparticles loaded with exenatide were prepared via coprecipitation of the drug and the polymer followed by micronization. Particle size, drug load and release of incorporated exenatide were evaluated. Permeation enhancing properties of the formulations were investigated on excised porcine respiratory mucosa. The viability of the mucosa was investigated by histological studies. Furthermore, ciliary beat frequency (CBF) studies were performed. Microparticles displayed a mean size of 70-80 µm. Drug encapsulation was ∼80% for both thiolated and non-thiolated microparticles. Exenatide was released from both thiolated and non-thiolated particles in comparison to exenatide in buffer only within 40 min. As compared to exenatide dissolved in buffer only, non-thiolated and thiolated microparticles resulted in a 2.6- and 4.7-fold uptake, respectively. Histological studies performed before and after permeation studies showed that the mucosa is not damaged during permeation studies. CBF studies showed that the formulations were cilio-friendly. Based on these results, poly(acrylic acid)-cysteine-based microparticles seem to be a promising approach starting point for the nasal delivery of exenatide.

Enzymatic degradation of thiolated chitosan.

The objective of this study was to evaluate the biodegradability of thiolated chitosans in comparison to unmodified chitosan. Mediated by carbodiimide, thioglycolic acid (TGA) and mercaptonicotinic acid (MNA) were covalently attached to chitosan via formation an amide bond. Applying two different concentrations of carbodiimide 50 and 100 mM, two chitosan TGA conjugates (TGA A and TGA B) were obtained. According to chitosan solution (3% m/v) thiomer solutions were prepared and chitosanolytic enzyme solutions were added. Lysozyme, pectinase and cellulase were examined in chitosan degrading activity. The enzymatic degradability of these thiomers was investigated by viscosity measurements with a plate-plate viscometer. The obtained chitosan TGA conjugate A displayed 267.7 µmol and conjugate B displayed 116.3 µmol of immobilized thiol groups. With 325.4 µmol immobilized thiol groups, chitosan MNA conjugate displayed the most content of thiol groups. In rheological studies subsequently the modification proved that chitosan TGA conjugates with a higher coupling rate of thiol groups were not only degraded to a lesser extent by 20.9-26.4% but also more slowly. Chitosan mercaptonicotinic acid was degraded by 31.4-50.1% depending the investigated enzyme and even faster than unmodified chitosan. According to these results the biodegradability can be influenced by various modifications of the polymer which showed in particular that the rate of biodegradation is increased when MNA is the ligand, whereas the degradation is hampered when TGA is used as ligand for chitosan.

Thiolated chitosans: influence of various sulfhydryl ligands on permeation-enhancing and P-gp inhibitory properties.

PURPOSE: The influence of various sulfhydryl ligands on permeation-enhancing and P-glycoprotein (P-gp) inhibitory properties of the six established thiolated chitosan conjugates was investigated using Rhodamine-123 (Rho-123) and fluorescein isothiocyanate-dextran 4 (FD4) as model compounds. METHODS: Permeation of these compounds was tested on freshly excised rat intestine in Ussing-type chambers. Apparent permeability coefficients (Papp) were calculated and compared to values obtained from the buffer only control. RESULTS: The lyophilized polymers had a thiol group content in the range of 230-520 µmol/g. Results of this study led to the following rank order in permeation enhancement: chitosan-6-mercaptonicotinic acid (chitosan-6MNA) > chitosan-cysteine (chitosan-Cys) > chitosan-glutathione (chitosan-GSH) > chitosan-4-thiobutylamidine (chitosan-TBA) > chitosan-thioglycolic acid (chitosan-TGA) > chitosan-N-acetyl cysteine (chitosan-NAC). In P-gp inhibition studies, 0.5% (m/v) chitosan-NAC showed the highest inhibitory effect on P-gp, where the Papp was determined to be 3.78-fold increased compared with the buffer control. Among these thiolated chitosans, chitosan-NAC and chitosan-6MNA are the most effective polymers being responsible for P-gp inhibition and permeation enhancement, respectively. CONCLUSION: These thiolated chitosans would therefore be advantageous tools for enhancing the noninvasive bioavailability of active pharmaceutical ingredients.

Bioadhesive properties of poly(anhydride) nanoparticles coated with different molecular weights chitosan.

The aim of this study was to develop and characterize the bioadhesive properties of poly(anhydride) nanoparticles coated with two types of low-molecular weight chitosan (CH20 of 20 kDa or CH50 of 50 kDa) or their thiolated conjugates. Nanoparticles were prepared by a solvent displacement method and characterized by measuring the size, zeta potential, morphology and composition. For bioadhesion studies, nanoparticles were fluorescently labelled with rhodamine B isothiocyanate. In all cases, coated nanoparticles showed a slightly higher size and lower negative zeta potential than uncoated nanoparticles. Nanoparticles coated with CH20 showed a higher adhesive capacity than uncoated nanoparticles. On the contrary, when nanoparticles were coated with CH50, the resulting carriers displayed a decreased ability to develop adhesive interactions within the gut. Finally, the coating of nanoparticles with thiolated chitosan improved their adhesive abilities. Poly(anhydride) nanoparticles coated with thiolated chitosan can be considered as promising bioadhesive particulate carriers for oral delivery strategies.

The use of chitosan-6-mercaptonicotinic acid nanoparticles for oral peptide drug delivery.

The aim of this study was to develop a novel nanoparticulate formulation and test its potential for oral peptide drug delivery. Chitosan-6-mercaptonicotinic acid is a novel thiolated chitosan with strong mucoadhesive properties. Nanoparticles were developed by an ionic gellation method. The obtained particles were characterized in terms of mucoadhesion, stability, toxicity, and in vitro release. Human insulin (HI) was chosen as a model peptide drug, incorporated in the particles and orally administered to rats. Human insulin was quantified in the blood by means of ELISA. The size of the obtained particles was in the range of 200-300 nm and the zeta potential was determined to be +8-+23 depending on the amount of thiol groups attached on the polymer. After 3 h of incubation up to 60% of the thiolated chitosan nanoparticles remained attached to the mucosa in contrast to 20% of unmodified chitosan particles. The AUC of HI after oral administration of thiolated chitosan nanoparticles was 4-fold improved compared to unmodified chitosan nanoparticles. Due to these improvements, chitosan-6-mercaptonicotinic acid nanoparticles are promising vehicles for oral delivery of peptide drugs.

The impact of vehicles on the mucoadhesive properties of orally administrated nanoparticles: a case study with chitosan-4-thiobutylamidine conjugate.

The aim of this study was to evaluate the impact of various vehicles on mucoadhesive properties of thiolated chitosan nanoparticles both in vitro and in vivo. Nanoparticles (NPs) were prepared by in situ gelation technique followed by labeling with fluorescein diacetate. Comparative studies on mucoadhesion were done with these thiolated chitosan NPs and unmodified chitosan NPs (control). The obtained nanoparticles displayed a mean diameter of 164.2 ± 6.9 nm and a zeta potential of 21.5 ± 5 mV. In an in vitro adhesion study, unhydrated thiolated NPs adhered strongly to freshly excised porcine small intestine, which was more than threefold increase compared to the control. In contrast, in the presence of various vehicles (PEG 300, miglyol 840, PEG 6000, cremophor EL, and caprylic triglyceride), the mucoadhesive properties of thiolated NPs were comparatively weak. Thiolated NPs suspended in caprylic triglyceride, for example, had a percent mucoadhesion of 22.50 ± 5.35% on the mucosa. Furthermore, results from in vivo mucoadhesion studies revealed that the dry form of nanoparticles exhibits the strongest mucoadhesion, followed by nanoparticles suspended in PEG 300, miglyol, and 100 mM phosphate buffer, in that order. Three hours after administration, the gastrointestinal residence time of the dry form of thiolated NPs was up to 3.6-fold prolonged. These findings should contribute to the design of highly effective oral mucoadhesive nanoparticulate drug delivery systems.

Chitosan-graft-6-mercaptonicotinic acid: synthesis, characterization, and biocompatibility.

Thiolated chitosans are relatively new thiolated biopolymers exhibiting mucoadhesive, enzyme inhibitory, and permeation enhancing properties. A drawback, however, is their pH dependent reactivity. The aim of this study was therefore to develop a novel thiolated chitosan showing a non pH dependent reactivity of its thiol groups. For this purpose, 6-mercaptonicotinic acid (6-MNA) was covalently attached to chitosan by a carbodiimide mediated reaction. The obtained conjugate was characterized in vitro by quantification of immobilized thiol groups, cytotoxicity, in situ gelling properties, and disulfide bond formation at different pH. The synthesized conjugate displayed up to 973.80 micromol thiol groups per gram of polymer in reduced form. The polymer was nontoxic and showed in situ gelling properties. Furthermore, disulfide bond formation and therefore gelling properties occurred at various pH ranges. The reactivity of thiol groups was in the same range at pH 3 and pH 6.8. According to these results, chitosan-6 mercaptonicotinic acid seems to have some promising features to be used particularly for mucoadhesive formulations.