Monitoring of heparin and its low-molecular-weight analogs by silicon field effect.

Heparin is a highly sulfated glycosaminoglycan that is used as an important clinical anticoagulant. Monitoring and control of the heparin level in a patient's blood during and after surgery is essential, but current clinical methods are limited to indirect and off-line assays. We have developed a silicon field-effect sensor for direct detection of heparin by its intrinsic negative charge. The sensor consists of a simple microfabricated electrolyte-insulator-silicon structure encapsulated within microfluidic channels. As heparin-specific surface probes the clinical heparin antagonist protamine or the physiological partner antithrombin III were used. The dose-response curves in 10% PBS revealed a detection limit of 0.001 units/ml, which is orders of magnitude lower than clinically relevant concentrations. We also detected heparin-based drugs such as the low-molecular-weight heparin enoxaparin (Lovenox) and the synthetic pentasaccharide heparin analog fondaparinux (Arixtra), which cannot be monitored by the existing near-patient clinical methods. We demonstrated the specificity of the antithrombin III functionalized sensor for the physiologically active pentasaccharide sequence. As a validation, we showed correlation of our measurements to those from a colorimetric assay for heparin-mediated anti-Xa activity. These results demonstrate that silicon field-effect sensors could be used in the clinic for routine monitoring and maintenance of therapeutic levels of heparin and heparin-based drugs and in the laboratory for quantitation of total amount and specific epitopes of heparin and other glycosaminoglycans.

Immobilized N-alkylated polyethylenimine avidly kills bacteria by rupturing cell membranes with no resistance developed.

Several critical mechanistic and phenomenological aspects of the microbicidal surface coatings based on immobilized hydrophobic polycations, previously developed by us, are addressed. Using Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria, remarkable bactericidal action (up to a 10(9)-fold reduction in live bacteria count in the surface-exposed solution and a 100% inactivation of the surface-adhered bacteria) of an amino-glass slide covalently derivatized with N-hexyl,methyl-polyethylenimine (PEI) is found to be due to rupturing bacterial cell membranes by the polymeric chains. The bacteria fail to develop noticeable resistance to this lethal action over the course of many successive generations. Finally, the immobilized N-alkyl-PEI, while deadly to bacteria, is determined to be harmless to mammalian (monkey kidney) cells.

Conjugate of palladium(II) complex and beta-cyclodextrin acts as a biomimetic peptidase.

We combined the newly discovered ability of [Pd(H2O)4]2+ to residue-selectively hydrolyze X-Pro bonds in peptides at 6

Transition-metal complexes as enzyme-like reagents for protein cleavage: complex cis-[Pt(en)(H2O)2]2+ as a new methionine-specific protease.

Complex cis-[Pt(en)(H(2)O)(2)](2+) promotes selective hydrolytic cleavage of two proteins, horse cytochrome c and bovine beta-casein. The cleavage is completed in 24 h under relatively mild conditions, at about pH 2.5, and a temperature as low as 40 degrees C. The results of HPLC and TSDS PAGE separations, MALDI mass spectrometry, and Edman sequencing showed that cleavage occurred exclusively at the peptide bond involving the C-terminus of each methionine residue, both such residues in cytochrome c and all six such residues in beta-casein. While having the same selectivity as cyanogen bromide (CNBr), the most common chemical protease, cis-[Pt(en)(H(2)O)(2)](2+) has several advantages. It is nonvolatile, easy to handle, and recyclable. Its cleavage is residue-selective, the rest of the polypeptide backbone remains intact, and the other side chains remain unmodified. It is applied in approximately equimolar amounts with respect to methionine residues, creates free amino and carboxylic groups, and cleaves even the Met-Pro bond, which is resistant to CNBr and most proteolytic enzymes. Finally the complex also works in the presence of the denaturing reagent sodium dodecyl sulfate. Experiments with the synthetic peptides, AcAla-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala (termed Met-peptide) and AcVal-Lys-Gly-Gly-His-Ala-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala (termed HisMet-peptide) as substrates, revealed structural and mechanistic features of the proteolytic reactions. We explain why two similar complexes with similar metal ions, cis-[Pt(en)(H(2)O)(2)](2+) and cis-[Pd(en)(H(2)O)(2)](2+), differ in selectivity as proteolytic reagents. The selectivity of cleavage is governed by the selectivity of the cis-[Pt(en)(H(2)O)(2)](2+) binding to the methionine side chain. The proteolytic activity is governed by the modes of coordination, which control the approach of the anchored Pt(II) ion to the scissile peptide bond. The cleavage occurs with a small, but significant, catalytic turnover of more than 18 after 7 days. The ability of cis-[Pt(en)(H(2)O)(2)](2+) to cleave proteins at relatively few sites, with explicable selectivity and catalytic turnover, bodes well for its use in biochemical practice.

Combined use of platinum(II) complexes and palladium(II) complexes for selective cleavage of peptides and proteins.

This study shows, for the first time, the advantages of combining two transition-metal complexes as selective proteolytic reagents. In this procedure, cis-[Pt(en)(H(2)O)(2)](2+) is followed by [Pd(H(2)O)(4)](2+). In the peptide AcAla-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala, the Pt(II) reagent cleaves the Met6-Ala7 peptide bond, whereas the Pd(II) reagent cleaves the Gly4-Gly5 bond. In the peptide AcVal-Lys-Gly-Gly-His-Ala-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala, the Pt(II) reagent cleaves the Met11-Ala12 peptide bond, whereas the Pd(II) reagent cleaves the Gly3-Gly4 bond. All cleavage reactions are regioselective and complete at pH 2.0 and 60 degrees C. Each metal ion binds to an anchoring side chain and then, as a Lewis acid, activates a proximal peptide bond toward hydrolysis by the solvent water. The selectivity in cleavage is a consequence of the selectivity in this initial anchoring. Both Pt(II) and Pd(II) reagents bind to the methionine side chain, whereas only the Pd(II) reagent binds to the histidine side chain under the reaction conditions. Consequently, only methionine residues direct the cleavage by the Pt(II) reagent, whereas both methionine and histidine residues direct the cleavage by the Pd(II) reagent. The Pt(II) reagent cleaves the first bond downstream from the anchor, i.e., the Met-Z bond. The Pd(II) reagent cleaves the second bond upstream from the anchor, i.e., the X-Y bond in the X-Y-Met-Z and in the X-Y-His-Z segments. The diethylenetriamine complex [Pt(dien)(H(2)O)](2+) cannot promote cleavage. Its prior binding to the Met11 residue in the second peptide prevents the Pd(II) reagents from binding to Met11 and cleaving the Gly9-Gly10 bond and directs the cleavage by the Pd(II) reagent exclusively at the Gly3-Gly4 bond. Our new method was tested on equine myoglobin, which contains 2 methionine residues and 11 histidine residues. The complete methionine-directed cleavage of the Met55-Lys56 and Met131-Thr132 bonds by the Pt(II) reagent produced three fragments, suitable for various biochemical applications because they are relatively long and contain amino and carboxylic terminal groups. The deliberately incomplete histidine-directed cleavage of the long fragments 1.55 and 56.131 at many sites by the Pd(II) reagent produced numerous short fragments, suitable for protein identification by mass spectrometry. The ability of combined Pt(II) and Pd(II) complexes to cleave proteins with explicable and adjustable selectivity and with good yields bodes well for their greater use in biochemical and bioanalytical practice.

Palladium(II) complex as a sequence-specific peptidase: hydrolytic cleavage under mild conditions of X-Pro peptide bonds in X-Pro-Met and X-Pro-His segments.

The X-Pro peptide bond (in which X represents any amino acid residue) in peptides and proteins is resistant to cleavage by most proteolytic enzymes. We show that [Pd(H(2)O)(4)](2+) ion can selectively hydrolyze this tertiary peptide bond within the X-Pro-Met and X-Pro-His sequence segments. The hydrolysis requires an equimolar amount of the Pd(II) reagent and occurs under mild conditions-at temperature as low as 20 degrees C (with half-life of 1.0 h at pH 2.0) and at pH as high as 7.0 (with half-life of 4.2 h at pH 7.0 and 40 degrees C). The secondary peptide bond, exemplified by X-Gly in the X-Gly-Met and X-Gly-His sequence segments, however, is cleaved only in weakly acidic solution (pH < 4.0) and more slowly (half-life is 4.2 h at pH 2.0 and 60 degrees C). We explain the sequence-specificity of X-Pro cleavage by NMR spectroscopic analysis of the coordination of the X-Pro-Met segment to the Pd(II) ion. We give indirect evidence for the mechanism of cleavage by analyzing the conformation of the scissile X-Pro peptide bond, and by comparing the rate constants for the cleavage of the tertiary X-Pro peptide bond, the tertiary X-Sar peptide bond (Sar is N-methyl glycine), and the typical secondary X-Gly peptide bond in a set of analogous oligopeptides. Methionine and histidine side chains provide the recognition by selectively binding (anchoring) the Pd(II) ion. The proline residue provides the enhanced activity because its tertiary X-Pro peptide bond favors the cleavage-enhancing binding of the Pd(II) ion to the peptide oxygen atom and prevents the cleavage-inhibiting binding of the Pd(II) ion upstream of the anchoring (histidine or methionine) residue. Cleavage can be switched from the residue-selective to the sequence-specific mode by simply adjusting the pH of the aqueous solution. In acidic solutions, any X-Y bond in X-Y-Met and X-Y-His segments is cleaved because the cleavage is directed by anchoring methionine and histidine residues. In mildly acidic and neutral solutions, only the X-Pro bond in X-Pro-Met and X-Pro-His sequences is cleaved because of an interplay between the anchoring residue and the proline residue preceding it. Because Pro-Met and Pro-His sequences are rare in proteins, this sequence-specific cleavage is potentially useful for the removal of the fusion tags from the bioengineered fusion proteins.

Interplay of terminal amino group and coordinating side chains in directing regioselective cleavage of natural peptides and proteins with palladium(II) complexes.

Palladium(II) ions anchored to side chains of histidine and methionine residues in peptides and proteins in weakly acidic aqueous solutions promote hydrolytic cleavage of proximate amide bonds in the backbone. In this study, we determine how attachment of Pd(II) ions to histidine and methionine anchors and also to the terminal amino group in six natural peptides (chains A and B of insulin, segment 11-14 of angiotensinogen, pentagastrin, angiotensin II, and segment 3-8 of angiotensin II) and two proteins (ubiquitin and cytochrome c) affects regioselectivity and rate of backbone cleavage. These Pd(II)-promoted reactions follow a clear pattern of regioselectivity, directed by the anchoring side chains. When the Pd(II) reagent is nonspecifically anchored to the terminal amino group, the ligating site that is present in almost all proteins, the cleavage is fortunately absent. When the reagent is anchored to a residue in positions 1, 2, or 3, cleavage is absent, because the terminal amino group and deprotonated amide nitrogen atom(s) interposed between it and the anchor "lock" the Pd(II) ion in hydrolytically inactive chelate complexes. When the reagent is anchored to residues in positions beyond 3, the second amide bond upstream from the anchor is regioselectively cleaved in all cases when the anchor was "isolated," that is, flanked by noncoordinating side chains. Segment 3-8 of angiotensin II undergoes additional cleavage, which we explain by determining the rate constants for the cleavage, identifying the rate-limiting displacement of ethylenediamine ligand from the Pd(II) ion, and detecting several intermediates. Experiments with cytochrome c demonstrate that the number of cleavage sites can be controlled by adjusting the mole ratio of the Pd(II) reagent to the substrate. Our inorganic peptidases are useful for biochemical applications because their regioselectivity and reactivity set them apart from proteolytic enzymes and organic chemical reagents.

Palladium(II) complexes, as synthetic peptidases, regioselectively cleave the second peptide bond "upstream" from methionine and histidine side chains.

Palladium(II) complexes promote hydrolysis of natural and synthetic oligopeptides with unprecedented regioselectivity; the only cleavage site is the second peptide bond upstream from a methionine or a histidine side chain, that is, the bond involving the amino group of the residue that precedes this side chain. We investigate this regioselectivity with four N-acetylated peptides as substrates: neurotransmitter methionine enkephalin (Ac-Tyr-Gly-Gly-Phe-Met) and synthetic peptides termed Met-peptide (Ac-Ala-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala), His-peptide (Ac-Val-Lys-Gly-Gly-His-Ala-Lys-Tyr-Gly-Gly-Met(OX)-Ala-Ala-Arg-Ala), in which a Met is oxidized to sulfone, and HisMet-peptide (Ac-Val-Lys-Gly-Gly-His-Ala-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala). While maintaining protein-like properties, these substrates are suitable for quantitative study since their coordination to Pd(II) ion can be determined (by NMR spectroscopy), and the cleavage fragments can be separated (by HPLC methods) and identified (by MALDI mass spectrometry). The only peptide bonds cleaved were the Gly3-Phe4 bond in methionine enkephalin, Gly4-Gly5 bond in Met-peptide, Gly3-Gly4 in His-peptide, and Gly3-Gly4 and Gly9-Gly10 bonds in HisMet-peptide. We explain this consistent regioselectivity of cleavage by studying the modes of Met-peptide coordination to the Pd(II) ion in [Pd(H(2)O)(4)](2+) complex. In acidic solution, the rapid attachment of the Pd(II) complex to the methionine side chain is followed by the interaction of the Pd(II) ion with the peptide backbone upstream from the anchor. In the hydrolytically active complex, Met-peptide is coordinated to Pd(II) ion as a bidentate ligand - via sulfur atom in the methionine side chain and the first peptide nitrogen upstream from this anchor - so that the Pd(II) complex approaches the scissile peptide bond. Because the increased acidity favors this hydrolytically active complex, the rate of cleavage guided by either histidine or methionine anchor increased as pH was lowered from 4.5 to 0.5. The unwanted additional cleavage of the first peptide bond upstream from the anchor is suppressed if pH is kept above 1.2. Four Pd(II) complexes cleave Met-peptide with the same regioselectivity but at somewhat different rates. Complexes in which Pd(II) ion carries labile ligands, such as [Pd(H(2)O)(4)](2+) and [Pd(NH(3))(4)](2+), are more reactive than those containing anionic ligands, such as [PdCl(4)](2)(-), or a bidentate ligand, such as cis-[Pd(en)(H(2)O)(2)](2+). When both methionine and histidine residues are present in the same substrate, as in HisMet-peptide, 1 molar equivalent of the Pd(II) complex distributes itself evenly at both anchors and provides partial cleavage, whereas 2 molar equivalents of the promoter completely cleave the second peptide bond upstream from each of the anchors. The results of this study bode well for growing use of palladium(II) reagents in biochemical and bioanalytical practice.