Antibacterial efficacy and osteogenic potential of mineral trioxide aggregate-based retrograde filling material incorporated with silver nanoparticle and calcium fluoride.

Background/purpose: The retrograde filling material, particularly mineral trioxide aggregate (MTA) employed in apicoectomy, should possess high antibacterial efficacy and osteogenic potential. We evaluated the antibacterial efficacy, biocompatibility, and osteogenic potential following the addition of silver nanoparticles (AgNPs) and calcium fluoride (CaF2) in retrograde filling material of MTA. Materials and methods: MTA was mixed with four different solvents. Group 1 (G1): distilled water, Group 2 (G2): 50 ppm AgNPs, Group 3 (G3): 1 wt% CaF2, and Group 4 (G4): 50 ppm AgNPs and 1 wt% CaF2. The pH variation of each group was monitored, while the surface roughness was measured. The antibacterial efficacy against Enterococcus faecalis (E. faecalis) and the viability of murine pre-osteoblast (MC3T3) were evaluated for each group using colorimetric assays. The gene expression levels of osteogenic potential marker (OCN, ALPL, and RUNX2) in MC3T3 cells for each group were quantified using real-time-qPCR. Statistical analysis was performed at α = 0.05 level of significance. Results: When comparing the levels of antibacterial efficacy, the order of effectiveness was G4>G2>G3>G1 (P < 0.05). In the cell viability test, owing to MTA-eluted growth medium having a positive effect on MC3T3 cell proliferation, G1-4 exhibited a statistically increased cell viability compared to the control (P < 0.05). However, G2-4 did not result in a statistically significant difference when compared to G1 (P < 0.05). Moreover, G4 exhibited the highest gene expression among the four groups (P < 0.05). Conclusion: The addition of AgNPs and CaF2 to MTA could be a promising option for use as a new retrograde filling material.

Mineral trioxide aggregate in membrane form as a barrier membrane in guided bone regeneration.

Background/purpose: In the field of conservative dentistry and endodontics, mineral trioxide aggregate (MTA), commonly used, possesses advantages such as biocompatibility, antimicrobial properties and osteogenic potential. This study investigated the feasibility of utilizing membrane form mineral trioxide aggregate (MTA) as a barrier membrane in guided bone regeneration (GBR) procedures. Materials and methods: Membranes were electrospun from three different formulations: 15 w/v% Polycaprolactone (PCL), 13 w/v% PCL + 2 w/v% MTA (2MTA), and 11 w/v% PCL + 4 w/v% MTA (4MTA). Physicochemical and mechanical properties of the electrospun membrane were compared, encompassing parameters such as surface morphology, fiber diameter distribution, chemical composition, phase identification, tensile stress, pH variation, and water contact angle. Moreover, the antimicrobial properties against of the electrospun membranes were assessed through direct exposure to streptococcus aureus (S. aureus) and candida albicans (C. albicans). Additionally, on the 7th day, biocompatibility and cell attachment were investigated with respect to L929 (fibroblast) and MC3T3 (pre-osteoblast) cells. Inhibition of L929 cell infiltration and the expression of osteogenic related genes including osteocalcin (OCN), alkaline phosphatase (ALP), and runt related transcription factor 2 (RUNX2) in MC3T3 cells on 7th and 14th days were also investigated. Results: PCL, 2MTA, and 4MTA exhibited no statistically differences in fiber diameter distribution and tensile stress. However, as the MTA content increased, wettability and pH also increased. Due to the elevated pH, 4MTA demonstrated the lowest viability S.aureus and C.albicans. All membranes were highly biocompatibility and promoted cell attachment, while effectively preventing L929 cell infiltration. Lastly 4MTA showed increase in OCN, ALP, and RUNX2 expression on both 7th and 14th day. Conclusion: The membrane form MTA possessed characteristics essential for a novel barrier membrane.

The efficacy of therapeutic hypothermia in patients with poor-grade aneurysmal subarachnoid hemorrhage: a systematic review and meta-analysis.

BACKGROUND: This study evaluates the effectiveness of Therapeutic Hypothermia (TH) in treating poor-grade aneurysmal subarachnoid hemorrhage (SAH), focusing on functional outcomes, mortality, and complications such as vasospasm, delayed cerebral ischemia (DCI), and hydrocephalus. METHODS: Adhering to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 guidelines, a comprehensive literature search was conducted across multiple databases, including Medline, Embase, and Cochrane Central, up to November 2023. Nine studies involving 368 patients were selected based on eligibility criteria focusing on TH in poor-grade SAH patients. Data extraction, bias assessment, and evidence certainty were systematically performed. RESULTS: The primary analysis of unfavorable outcomes in 271 participants showed no significant difference between the TH and standard care groups (risk ratio [RR], 0.87). However, a significant reduction in vasospasm was observed in the TH group (RR, 0.63) among 174 participants. No significant differences were found in DCI, hydrocephalus, and mortality rates in the respective participant groups. CONCLUSIONS: TH did not significantly improve primary unfavorable outcomes in poor-grade SAH patients. However, the reduction in vasospasm rates indicates potential specific benefits. The absence of significant findings in other secondary outcomes and mortality highlights the need for further research to better understand TH's role in treating this patient population.

Suppressing Organic Bromine but Promoting Bromate: Is the Ultraviolet/Ozone Process a Double-Edged Sword for the Toxicity of Wastewater to Mammalian Cells?

Brominated byproducts and toxicity generation are critical issues for ozone application to wastewater containing bromide. This study demonstrated that ultraviolet/ozone (UV/O3, 100 mJ/cm2, 1 mg-O3/mg-DOC) reduced the cytotoxicity of wastewater from 14.2 mg of pentol/L produced by ozonation to 4.3 mg of pentol/L (1 mg/L bromide, pH 7.0). The genotoxicity was also reduced from 1.65 to 0.17 µg-4-NQO/L by UV/O3. Compared with that of O3 alone, adsorbable organic bromine was reduced from 25.8 to 5.3 µg/L by UV/O3, but bromate increased from 32.9 to 71.4 µg/L. The UV/O3 process enhanced the removal of pre-existing precursors (highly unsaturated and phenolic compounds and poly aromatic hydrocarbons), while new precursors were generated, yet the combined effect of UV/O3 on precursors did not result in a significant change in toxicity. Instead, UV radiation inhibited HOBr concentration through both rapid O3 decomposition to reduce HOBr production and decomposition of the formed HOBr, thus suppressing the AOBr formation. However, the hydroxyl radical-dominated pathway in UV/O3 led to a significant increase of bromate. Considering both organic bromine and bromate, the UV/O3 process effectively controlled both cytotoxicity and genotoxicity of wastewater to mammalian cells, even though an emphasis should be also placed on managing elevated bromate. Futhermore, other end points are needed to evaluate the toxicity outcomes of the UV/O3 process.

Modulation of Bone Mineral Density and Its Response to Menopausal Hormone Therapy according to the Apolipoprotein E Genotype in Postmenopausal Korean Women.

OBJECTIVES: Genetic factors are a major cause of osteoporosis. The present study evaluated the association of the apolipoprotein E (ApoE) genotype with bone mineral density (BMD) and its response to menopausal hormone therapy (MHT) in postmenopausal Korean women. METHODS: This retrospective cohort study included 172 postmenopausal women with no endocrine diseases, medications, or lifestyles that would affect bone metabolism and who were continuously treated with MHT for at least 2 years. BMDs were measured at baseline and periodically. RESULTS: Linear regression analysis demonstrated similar baseline BMDs at the lumbar spine, but significantly lower at the femur neck and total hip in the ApoE ε4 carrier than in the noncarrier group, after controlling for age, body mass index, and history of MHT usage. Overall, the Wilcoxon signed rank test demonstrated that MHT increased the BMD percentage change at all three regions, and the Generalized Estimating Equation (GEE) demonstrated significant time trends at the lumbar spine and femur neck. ApoE ε4 noncarriers exhibited a significant time trend in BMD changes at the femur neck, whereas ε4 carriers exhibited a time trend at the lumbar spine. However, BMD changes at each time point were comparable at all regions between the groups. Notably, GEE adjusted for baseline characteristics and BMD revealed a significant interaction effect of time and ApoE ε4 allele in BMD changes at the femur neck. CONCLUSIONS: Postmenopausal Korean women carrying the ApoE ε4 allele demonstrated a lower hip BMD compared with ε4 noncarriers. Furthermore, the ε4 allele may modulate hip BMD responses to MHT.

Suppression of photoreactivation of E. coli by excimer far-UV light (222 nm) via damage to multiple targets.

Low-pressure mercury lamps emitting at 254 nm (UV254) are used widely for disinfection. However, subsequent exposure to visible light results in photoreactivation of treated bacteria. This study employed a krypton chloride excimer lamp emitting at 222 nm (UV222) to inactivate E. coli. UV222 and UV254 treatment had similar E. coli-inactivation kinetics. Upon subsequent irradiation with visible light, E. coli inactivated by UV254 was reactivated from 2.71-log to 4.75-log, whereas E. coli inactivated by UV222 showed negligible photoreactivation. UV222 treatment irreversibly broke DNA strands in the bacterium, whereas UV254 treatment primarily formed nucleobase dimers. Additionally, UV222 treatment caused cell membrane damage, resulting in wizened, pitted cells and permeability changes. The damage to the cell membrane was mainly due to the photolysis of proteins and lipids by UV222. Furthermore, the photolysis of proteins by UV222 destroyed enzymes, which blocked photoreactivation and dark repair. The multiple damages can be further evidenced by 4.0-61.1 times higher quantum yield in the photolysis of nucleobases and amino acids for UV222 than UV254. This study demonstrates that UV222 treatment damages multiple sites in bacteria, leading to their inactivation. Employing UV222 treatment as an alternative to UV254 could be viable for inhibiting microorganism photoreactivation in water and wastewater.

Floating electrode-dielectric barrier discharge-based plasma promotes skin regeneration in a full-thickness skin defect mouse model.

Wound healing involves a complex and dynamic interplay among various cell types, cytokines, and growth factors. Macrophages and transforming growth factor-ß1 (TGF-ß1) play an essential role in different phases of wound healing. Cold atmospheric plasma has a wide range of applications in the treatment of chronic wounds. Hence, we aimed to investigate the safety and efficacy of a custom-made plasma device in a full-thickness skin defect mouse model. Here, we investigated the wound tissue on days 6 and 12 using histology, qPCR, and western blotting. During the inflammation phase of wound repair, macrophages play an important role in the onset and resolution of inflammation, showing decreased F4/80 on day 6 of plasma treatment and increased TGF-ß1 levels. The plasma-treated group showed better epidermal epithelialization, dermal fibrosis, collagen maturation, and reduced inflammation than the control group. Our findings revealed that floating electrode-dielectric barrier discharge (FE-DBD)-based atmospheric-pressure plasma promoted significantly faster wound healing in the plasma-treated group than that in the control group with untreated wounds. Hence, plasma treatment accelerated wound healing processes without noticeable side effects and suppressed pro-inflammatory genes, suggesting that FE-DBD-based plasma could be a potential therapeutic option for treating various wounds.

Chemical effect on the Van Hove singularity in superconducting kagome metal AV3Sb5 (A = K, Rb, and Cs).

To understand the alkali-metal-dependent material properties of recently discovered AV3Sb5 (A = K, Rb, and Cs), we conducted a detailed electronic structure analysis based on first-principles density functional theory calculations. Contrary to the case of A = K and Rb, the energetic positions of the low-lying Van Hove singularities are reversed in CsV3Sb5, and the characteristic higher-order Van Hove point gets closer to the Fermi level. We found that this notable difference can be attributed to the chemical effect, apart from structural differences. Due to their different orbital compositions, Van Hove points show qualitatively different responses to the structure changes. A previously unnoticed highest lying point can be lowered, locating close to or even below the other ones in response to a reasonable range of bi- and uni-axial strain. Our results can be useful in better understanding the material-dependent features reported in this family and in realizing experimental control of exotic quantum phases.

Relationship between in-stent restenosis following carotid artery stenting and platelet reactivity to clopidogrel.

OBJECTIVE: To analyze the relationship between in-stent restenosis (ISR) following carotid artery stenting (CAS) and platelet clopidogrel reactivity confirmed by the P2Y12 reaction unit (PRU) and inhibition rate (IR). METHODS: We retrospectively analyzed 171 patients who underwent CAS with extracranial carotid stenosis from January 2016 to December 2019. Dual antiplatelet therapy with 100 mg aspirin and 75 mg clopidogrel was started ≥5 days before CAS. Clopidogrel resistance was measured with the PRU and IR the day before CAS. The ISR degree was classified into R1, R2, and R3 (moderate to severe luminal stenosis of ≥50% or occlusion) by carotid CT angiography after 24-30 months. The degree of quantitative association between platelet reactivity and ISR R3 was determined by the receiver operating characteristic curve method. The optimal cut-off values of PRU and IR were derived using the maximum Youden index. RESULTS: There were 33 R3 degrees of ISR (19.3%) and nine ipsilateral ischemic strokes (5.3%). The PRU and IR were different between R1+R2 degrees (176.4±50.1, 27.5±18.7%) and R3 degree (247.5±55.0, 10.3±13.4%) (P<0.001). The areas under the curves of PRU and IR were 0.841 and 0.781, and the optimal cut-off values were 220.0 and 14.5%, respectively. Multivariate logistic regression analysis showed that PRU ≥220 and IR ≤14.5% were significant predictive factors for ISR R3 (P<0.001 and P=0.017, respectively). ISR R3 was independently associated with ipsilateral ischemic stroke after CAS (P=0.012). CONCLUSIONS: High PRU (≥220) and low IR (≤14.5%) are related to ISR R3 following CAS, which may cause ipsilateral ischemic stroke.

Assessing the Chemical-Free Oxidation of Trace Organic Chemicals by VUV/UV as an Alternative to Conventional UV/H2O2.

Low-pressure mercury lamps with high-purity quartz can emit both vacuum-UV (VUV, 185 nm) and UV (254 nm) and are commercially available and promising for eliminating recalcitrant organic pollutants. The feasibility of VUV/UV as a chemical-free oxidation process was verified and quantitatively assessed by the concept of H2O2 equivalence (EQH2O2), at which UV/H2O2 showed the same performance as VUV/UV for the degradation of trace organic contaminants (TOrCs). Although VUV showed superior H2O activation and oxidation performance, its performance highly varied as a function of light path length (Lp) in water, while that of UV/H2O2 proportionally decreased with decreasing H2O2 dose regardless of Lp. On increasing Lp from 1.0 to 3.0 cm, the EQH2O2 of VUV/UV decreased from 0.81 to 0.22 mM H2O2. Chloride and nitrate hardly influenced UV/H2O2, but they dramatically inhibited VUV/UV. The competitive absorbance of VUV by chloride and nitrate was verified as the main reason. The inhibitory effect was partially compensated by •OH formation from the propagation reactions of chloride or nitrate VUV photolysis, which was verified by kinetic modeling in Kintecus. In water with an Lp of 2.0 cm, the EQH2O2 of VUV/UV decreased from 0.43 to 0.17 mM (60.8% decrease) on increasing the chloride concentration from 0 to 15 mM and to 0.20 mM (53.5% decrease) at 4 mM nitrate. The results of this study provide a comprehensive understanding of VUV/UV oxidation in comparison to UV/H2O2, which underscores the suitability and efficiency of chemical-free oxidation with VUV/UV.

Exploring the impedance-matching effect in terahertz reflection imaging of skin tissue.

Terahertz (THz) electromagnetic waves, known for their unique response to water, offer promising opportunities for next-generation biomedical diagnostics and novel cancer therapy technologies. This study investigated the impedance-matching effect, which enhances the efficiency of THz wave delivery into tissues and compensates for the signal distortion induced by the refractive index mismatch between the target and the sample substrate. Three candidate biocompatible materials, water, glycerol, and petroleum jelly were applied to a skin phantom and compared using THz two-dimensional imaging and time-of-flight imaging methods. Finally, we successfully demonstrated impedance-matching effect on mouse skin tissues.

3-(Methylthio)Propionic Acid from Bacillus thuringiensis Berliner Exhibits High Nematicidal Activity against the Root Knot Nematode Meloidogyne incognita (Kofoid and White) Chitwood.

Root knot nematodes cause serious damage to global agricultural production annually. Given that traditional chemical fumigant nematicides are harmful to non-target organisms and the environment, the development of biocontrol strategies has attracted significant attention in recent years. In this study, it was found that the Bacillus thuringiensis Berliner strain NBIN-863 exhibits strong fumigant nematicidal activity and has a high attraction effect on Meloidogyne incognita (Kofoid and White) Chitwood. Four volatile organic compounds (VOCs) produced by NBIN-863 were identified using solid-phase microextraction and gas chromatography-mass spectrometry. The nematicidal activity of four VOCs, namely, N-methylformamide, propenamide, 3-(methylthio)propionic acid, and phenylmalonic acid, was detected. Among these compounds, 3-(methylthio)propionic acid exhibited the highest direct contact nematicidal activity against M. incognita, with an LC50 value of 6.27 µg/mL at 24 h. In the fumigant bioassay, the mortality rate of M. incognita treated with 1 mg/mL of 3-(methylthio)propionic acid for 24 h increased to 69.93%. Furthermore, 3-(methylthio)propionic acid also exhibited an inhibitory effect on the egg-hatching of M. incognita. Using chemotaxis assays, it was determined that 3-(methylthio)propionic acid was highly attractive to M. incognita. In pot experiments, the application of 3-(methylthio)propionic acid resulted in a reduction in gall numbers, decreasing the number of galls per gram of tomato root from 97.58 to 6.97. Additionally, the root length and plant height of the treated plants showed significant increases in comparison with the control group. The current study suggests that 3-(methylthio)propionic acid is a novel nematicidal virulence factor of B. thuringiensis. Our research provides evidence for the potential use of NBIN-863 or its VOCs in biocontrol against root knot nematodes.

Ozone, hydrogen peroxide, and peroxymonosulfate disinfection of MS2 coliphage in water.

The control of viruses in water is critical to preventing the spread of infectious viral diseases. Many oxidants can inactivate viruses, and this study aims to systematically compare the disinfection effects of ozone (O3), peroxymonosulfate (PMS), and hydrogen peroxide (H2O2) on MS2 coliphage. The effects of oxidant dose and contact time on disinfection were explored, as were the disinfection effects of three oxidizing agents in secondary effluent. The 4-log inactivation of MS2 coliphage required 0.05 mM O3, 0.5 mM PMS, or 25 mM H2O2 with a contact time of 30 min. All three oxidants achieved at least 4-log disinfection within 30 min, and O3 required only 0.5 min. In secondary effluent, all three oxidants also achieved 4-log inactivation of MS2 coliphage. Excitation-emission matrix (EEM) results indicate that all three oxidants removed dissolved organic matter synchronously and O3 oxidized dissolved organic matter more thoroughly while maintaining disinfection efficacy. Considering the criteria of oxidant dose, contact time, and disinfection efficacy in secondary effluent, O3 is the best choice for MS2 coliphage disinfection among the three oxidants.

Applying machine learning random forest (RF) method in predicting the cement products with a co-processing of input materials: Optimizing the hyperparameters.

Co-processing recycled waste during cement production, i.e., using alternative materials such as secondary raw materials or secondary raw fuels, is widely practiced in developed countries. Alternative raw materials or fuels contain high concentrations of heavy metals and other hazardous chemicals, which might lead to the potential for dangerous heavy metals and hazardous chemicals to be transferred to clinker or cement products, resulting in exposure and emissions to people or the environment. Managing input materials and predicting which inputs affect the final concentration is essential to prevent potential hazards. We used the data of six heavy metals by input raw materials and input fuels of cement manufacturers in 2016-2017. The concentrations of Pb and Cu in cement were about 10-200 times and 4 to 200 times higher than other heavy metals (Cr, As, Cd, Hg), respectively. We profiled the influence of heavy metal concentration of each input material using the principal component analysis (PCA), which analyzed the leading causes of each heavy metal. The Random Forest (RF) ensemble model predicted cement heavy metal concentrations according to input materials. In the case of Cu, Cd, and Cr, the training performance showed R square values of 0.71, 0.71, and 0.92, respectively, as a result of predicting the cement heavy metal concentration according to the heavy metal concentration of each cement input material using the RF model, which is a machine learning model. The results of this study show that the RF model can be used to predict the amount and concentration of alternative raw materials and alternative fuels by controlling the concentration of heavy metals in cement through the concentration of heavy metals in the input materials.

Thermophysical properties and bonding with composite resin of premixed mineral trioxide aggregate for use as base material.

Dental bases require low thermal conductivity and good mechanical properties, such as bonding with composite resins. This study aims to elucidate the physicochemical properties of premixed mineral trioxide aggregate (MTA) for its suitability as a dental base and to explore the optimal adhesive strategy with composite resin. The thermal conductivity and compressive strength of this premixed MTA are 0.12 W/(m•K) and 93.76 MPa, respectively, Which are deemed adequate for its application as dental base. When bonded to composite resin, the use of 37% phosphoric acid etching before applying the Clearfil SE bond significantly reduced the bonding strength between composite resin and premixed MTA. This was because the compressive strength and Vickers hardness of premixed MTA decreased, and tricalcium silicate was dissolved from the surface during acid etching. Therefore, it is recommended to avoid using 37% phosphoric acid etching when bonding premixed MTA and composite resin as a dental base.

Multiplexed Quantitative Proteomics Reveals Proteomic Alterations in Two Rodent Traumatic Brain Injury Models.

In many cases of traumatic brain injury (TBI), conspicuous abnormalities, such as scalp wounds and intracranial hemorrhages, abate over time. However, many unnoticeable symptoms, including cognitive, emotional, and behavioral dysfunction, often last from several weeks to years after trauma, even for mild injuries. Moreover, the cause of such persistence of symptoms has not been examined extensively. Recent studies have implicated the dysregulation of the molecular system in the injured brain, necessitating an in-depth analysis of the proteome and signaling pathways that mediate the consequences of TBI. Thus, in this study, the brain proteomes of two TBI models were examined by quantitative proteomics during the recovery period to determine the molecular mechanisms of TBI. Our results show that the proteomes in both TBI models undergo distinct changes. A bioinformatics analysis demonstrated robust activation and inhibition of signaling pathways and core proteins that mediate biological processes after brain injury. These findings can help determine the molecular mechanisms that underlie the persistent effects of TBI and identify novel targets for drug interventions.

Efficient wastewater disinfection using a novel microwave discharge electrodeless ultraviolet system with ozone at an ultra-low dose.

Microwave discharge electrodeless lamp (MDEL) is a novel ultraviolet (UV) light source. Synergistic disinfection using UV light emitted by MDEL (MWUV) coupled with ozone (O3) at an ultra-low dose was investigated. Escherichia coli and Bacillus subtilis were deactivated more effectively by MWUV/O3 than by either MWUV or O3 alone. MWUV/O3 treatment using an O3 concentration of 0.4 mg/L gave an E. coli inactivation rate of 5.52 log. The photoreactivation degree and rate of E. coli were lower after inactivation by MWUV/O3 treatment than after MWUV treatment alone. The maximum photoreactivation rates after the MWUV/O3 and MWUV treatments were 2.90% and 16.08%, respectively. MWUV/O3 disinfection also inhibited dark resurrection of E. coli and gave a maximum dark resurrection rate of 0.0036%. Electron paramagnetic resonance spectroscopy indicated that more hydroxyl radicals were generated during MWUV/O3 treatment. Scanning electron microscopy and laser confocal scanning microscopy observations indicated that O3 played a key role in breaking down the cell structure. MWUV/O3 treatment gave a good disinfection effect on fecal coliform bacteria in actual domestic wastewater. The results indicated that inactivation of bacteria can be more effectively achieved by MWUV treatment with O3.

Determination of N-nitroso folic acid in folic acid and multivitamin supplements by LC-MS/MS.

Analysis of N-nitroso folic acid, a nitrosamine impurity found in folic acid, is challenging due to the complex sample matrices. Many of such supplements contain not only a variety of vitamins, including vitamin A, Bs, C, D and E, but also other ingredients such as minerals, docosahexaenoic acid (DHA), glucose syrup, sugar, and herbs. On the other hand, the strength of folic acid is typically low, ranging from 50 µg to 5 mg per unit. In this study, a highly selective and sensitive LC-MS/MS method was developed to accurately quantify N-nitroso folic acid in supplements containing folic acid. The sample was extracted by 0.1% ammonia solution: MeOH (9:1, v/v) containing 5 ng/mL of N-nitroso folic acid-d4 (Isotope internal standard). The quantification was performed by MRM in negative ionization mode. Mobile phases A and B were 0.1% formic acid in deionized water and methanol, respectively. The method was validated and found to have sufficient linearity (R2 > 0.995), accuracy (recovery 83-110%), precision (RSD 3%) and low LOD, LOQ (4 and 10 µg/g respectively, with respect to folic acid). The method was applied to the determination of N-nitroso folic acid in 40 supplements containing folic acid with different strengths and formulation. The content of N-nitroso folic acid was found to be up to 898 ng/unit (1794 µg/g with respect to folic acid). It enabled regulatory actions, such as product recall, to safeguard public health from unsafe products.

Whole genome sequencing data of the submerged macrophytes growth promoting and aerobic denitrifying bacterium Bacillus velezensis NBNZ-0060.

The Bacillus velezensis strain NBNZ-0060 was isolated from the bottom sediment samples of the lake Jin in Wuhan, China. This strain is an aerobic denitrifying bacterium and able to promote growth of submerged macrophytes. The 3,929,784 bp entire genome contains 3,781 coding sequences (CDS), 27 rRNAs, 85 tRNAs, 5 ncRNAs, with an average G + C content of 46.5%. The average nucleotide identity and digital DNA-DNA values between strain NBNZ-0060 and Bacillus velezensis NRRL B-41580T were 98.28% and 84.5%, respectively. The genome data have been deposited in NCBI with the accession number CP133277.1.