Translation and Linguistic Validation of the Patient's Knee Implant Performance (PKIP) into Japanese.

Objective: The patient's knee implant performance (PKIP) is a patient-reported outcome measure, developed in the USA in English that evaluates knee functional performance before and after primary total knee arthroplasty (TKA). The PKIP assesses the level of satisfaction, confidence, and stability, while performing various activities, as well as the need for changing ways of doing activities. It comprises 24 items. The objective of this study was to present the methodology of the linguistic validation of the PKIP. Methods: The Japanese version of the PKIP was developed using a standard linguistic validation (LV) process. The LV involved the following steps: (1) conceptual analysis of the original version; (2) translation into Japanese using a dual forward/backward translation process; (3) review by an orthopaedics surgeon; (4) test on five respondents; and (5) proofreading. Results: The translation itself did not reveal major translatability issues, either cultural, semantic, or syntactic. Most of the activities listed (e.g., going up stairs, getting in/out of a car, and walking up a hill/ramp/incline) were easily translated. Only one activity was culturally sensitive and raised some discussion, i.e., "sitting down on a toilet," since the style of Japanese toilets is different from the western style. Overall, the respondents well understood the questionnaire. However, the expression "how your knee is working with your body" used in the opening sentence was an issue for both the clinician and the respondents. A compromise was found by using a Japanese equivalent of "how your knee functions with your legs." Conclusion: The rigorous translation process, which involved the collaboration of a minimum of thirteen people (sponsor, four translators, two coordinators (one in Japan and one in Europe), one clinician, and five respondents) enabled the production of a Japanese version of the PKIP conceptually equivalent to the USA English original.

A novel imageless accelerometer-based navigation system improves acetabular cup placement accuracy during total hip arthroplasty in the lateral decubitus position.

INTRODUCTION: The accuracy of acetabular cup placement using conventional portable imageless navigation systems in total hip arthroplasty (THA) in the lateral decubitus position remains challenging. Several novel portable imageless navigation systems have been developed recently to improve cup placement accuracy in THA. This study compared the accuracy of acetabular cup placement using a conventional accelerometer-based portable navigation (c-APN) system and a novel accelerometer-based portable navigation (n-APN) system during THA in the lateral decubitus position. MATERIALS AND METHODS: This retrospective cohort study compared 45 THAs using the c-APN and 45 THAs using the n-APN system. The primary outcomes were the absolute errors between the intraoperative and postoperative values of acetabular cup radiographic inclination and anteversion angles and the percentage of cases with absolute errors within 5°. Intraoperative values were shown on navigation systems, and postoperative measurements were conducted using computed tomography images. RESULTS: The median absolute errors of the cup inclination angles were significantly smaller in the n-APN group than in the c-APN group (3.9° [interquartile range 2.2°-6.0°] versus 2.2° [interquartile range 1.0°-3.3°]; P = 0.002). Additionally, the median absolute errors of the cup anteversion angles were significantly smaller in the n-APN group than in the c-APN group (4.4° [interquartile range 2.4°-6.5°] versus 1.9° [interquartile range 0.8°-2.7°]; P < 0.001). Significant differences were observed in the percentage of cases with absolute errors within 5° of inclination (c-APN group 67% versus n-APN group 84%; P = 0.049) and anteversion angles (c-APN group 62% versus n-APN group 91%; P = 0.001). CONCLUSIONS: The n-APN system improved the accuracy of the cup placement compared to the c-APN system for THA in the lateral decubitus position.

Contact states with femoral cortical bone and periprosthetic bone mineral density changes differ between traditional and newly introduced fully hydroxyapatite-coated stems.

Aims: The aim of this study was to compare the pattern of initial fixation and changes in periprosthetic bone mineral density (BMD) between patients who underwent total hip arthroplasty (THA) using a traditional fully hydroxyapatite (HA)-coated stem (T-HA group) and those with a newly introduced fully HA-coated stem (N-HA group). Methods: The study included 36 patients with T-HA stems and 30 with N-HA stems. Dual-energy X-ray absorptiometry was used to measure the change in periprosthetic BMD, one and two years postoperatively. The 3D contact between the stem and femoral cortical bone was evaluated using a density-mapping system, and clinical assessment, including patient-reported outcome measurements, was recorded. Results: There were significantly larger contact areas in Gruen zones 3, 5, and 6 in the N-HA group than in the T-HA group. At two years postoperatively, there was a significant decrease in BMD around the proximal-medial femur (zone 6) in the N-HA group and a significant increase in the T-HA group. BMD changes in both groups correlated with BMI or preoperative lumbar BMD rather than with the extent of contact with the femoral cortical bone. Conclusion: The N-HA-coated stem showed a significantly larger contact area, indicating a distal fixation pattern, compared with the traditional fully HA-coated stem. The T-HA-coated stem showed better preservation of periprosthetic BMD, two years postoperatively. Surgeons should consider these patterns of fixation and differences in BMD when selecting fully HA-coated stems for THA, to improve the long-term outcomes.

Is bone remodelling around fully hydroxyapatite-coated and tapered-wedge stems related to the stem fixation pattern?

PURPOSE: This study aimed to compare bone mineral density (BMD) changes around the femoral component after total hip arthroplasty (THA) in a fully hydroxyapatite-coated stem (CORAIL) and in a tapered-wedge stem (Taperloc complete) and identify predictors of BMD changes. METHODS: This retrospective study compared 43 hips in the CORAIL group and 40 hips in the Taperloc group. The relative changes in BMD at 2 years after THA measured using dual-energy X-ray absorptiometry and the three-dimensional quantified contact states of the stem with the femoral cortical bone were assessed. Predictors of the relative change in the BMD around the proximal part of the stem were examined using multiple regression analysis. RESULTS: The decrease in BMD in Gruen zone 7 was significantly less in the CORAIL group than in the Taperloc group (P = 0.02). In the CORAIL group, the contact area in any zone was not a significant predictor of the relative changes in BMD. The contact area between the Taperloc stem and the femoral cortical bone in zones 2 and 6 was a positive predictor of the relative changes in BMD in zones 1 (P = 0.02 and P = 0.04, respectively) and 2 (P = 0.008 and P = 0.004, respectively). CONCLUSION: The CORAIL stem suppressed the postoperative BMD loss around the stem, irrespective of the contact state. The Taperloc complete stem required contact with the proximal femoral metaphysis to suppress the postoperative BMD loss around the stem.

No Impact of Contact Between the Medial Collar of a Hydroxyapatite-Coated Triple-Tapered Stem and the Femoral Neck on Periprosthetic Bone Mineral Density.

BACKGROUND: Hydroxyapatite-coated, triple-tapered, shorter-length stems with a medial collar have been reported with good results for a few years. We investigated whether contact between the medial collar and femoral neck affects clinical outcomes and changes in bone mineral density (BMD) in patients who have this type of stem in their total hip arthroplasty construct. METHODS: This was a retrospective, single-center study involving 62 patients scheduled for unilateral total hip arthroplasty using a hydroxyapatite-coated, triple-tapered, shorter-length stem who were followed for at least 1 year postoperatively. All patients had a Dorr type B femoral canal shape. Contact between the medial collar and the femoral neck was evaluated by computed tomography at the third postoperative month, and patients were classified into 2 groups. Postoperative clinical outcomes were investigated by the Western Ontario and McMaster Universities Arthritis Index and the Japanese Orthopaedic Association scores; radiological evaluation included stem fixation, spot welds and cortical hypertrophy, postoperative 3-dimensional stem alignment, and periprosthetic BMD changes. RESULTS: There were 51 patients in the Contact + group (collar and neck contact) and 11 in the Contact-group (no contact). There were no differences between the 2 groups in the improvement of Western Ontario and McMaster Universities Arthritis Index and Japanese Orthopaedic Association scores, stem fixation, occurrence of cortical hypertrophy, or 3-dimensional stem alignment. Radiolucent lines were present in zones 3, 4, and 5 in 6 patients (12%) in the Contact + group only, who had no statistical difference between the 2 groups. Bone mineral density (BMD) decreased most in zone 7 in both groups, with no difference between the 2 groups. CONCLUSIONS: The presence or absence of contact between the medial collar and femoral neck did not affect postoperative BMD changes or radiological or clinical results. LEVEL OF EVIDENCE: Therapeutic Level III.

Improvement of rotational arc during deep flexion range of a novel designed polyethylene insert for posterior-stabilised total knee arthroplasty.

BACKGROUND: One of the remaining issues in total knee arthroplasty (TKA) is achieving sufficient rotational arc during deep flexion range of the knee for specific postures such as the 'seiza' or cross-legged sitting. This study aimed to evaluate whether there was a change in the actual in vivo rotational arc during deep flexion range before and after a design change of polyethylene (PE) inserts. METHODS: In 50 posterior-stabilised TKA cases, knee kinematics, including rotational movement, were measured intraoperatively using an image-free navigation system to compare a newly designed PE insert with reduced the posterior lip with a conventional PE insert. Femoral-tibial rotational angles at 30°, 45°, 60°, 90°, 120°, and 130° knee flexion were evaluated. Varus/valgus instability, knee range of motion, and femoral rollback were also measured. Obtained parameters were compared between new and conventional PE inserts. The independent factors associated with rotational arc during deep flexion range (120° and 130° knee flexion) were analysed using multivariate analysis. RESULTS: The newly designed PE insert demonstrated a significant increase in the rotational arc at 120° (22.9 ± 8.7° vs. 30.1 ± 11.9°, P < 0.001) and 130° (24.3 ± 9.5° vs. 32.5 ± 12.4°, P < 0.001) knee flexion compared with that with the conventionally designed posterior-stabilised insert. Multivariate analysis demonstrated that using the newly designed PE insert was an independent predictor of improved rotational arc during deep flexion range: regression coefficient was 11.2 (95% confidence interval 7.1-15.3, P < 0.001). CONCLUSION: The design change, which reduced the posterior lip of the PE insert, contributed to improved rotational arc in 120° and 130° deep flexion ranges.

Stem alignment with short tapered-wedge cementless stems affects bone mineral density continuously for at least 5 years after primary total hip arthroplasty.

AIM: This study aimed to assess the relationship between the three-dimensional (3D) alignment of short tapered-wedge cementless stems and bone mineral density (BMD) changes in patients followed up for 5 years after total hip arthroplasty (THA). METHODS: We retrospectively analysed the hips of 52 patients who underwent THA using short tapered-wedge cementless stems at our institution from 2013 to 2016 with complete 5-year follow-up data. We evaluated the relationship between stem alignment, measured using a 3D-templating software, and BMD changes in the 7 Gruen zones. RESULTS: After 1 year, significant negative correlations between varus insertion and a decrease in BMD in zone 7 and between flexed insertion and decreases in BMD in zones 3 and 4 were noted. After 5 years, significant negative correlations between varus insertion and a decrease in BMD in zone 7 and between flexed insertion and decreases in BMD zones 2, 3, and 4 were observed. With increased amounts of varus/flexion stem alignment, the amount of BMD loss decreased. There was no correlation between anteverted stem insertion and changes in BMD levels. CONCLUSIONS: Our data showed that stem alignment affects BMD based on 5-year follow-up data after surgery. Careful observation is necessary, especially when using short tapered-wedge cementless stems, as stem alignment may affect changes in BMD levels more than 5 years after surgery.

Impact of constrained humeral liner on impingement-free range of motion and impingement type in reverse shoulder arthroplasty using a computer simulation.

BACKGROUND: Dislocation is a major complication of reverse total shoulder arthroplasty (RSA). The humeral liner may be changed to a constrained type when stability does not improve by increasing glenosphere size or lateralization with implants, and patients, particularly women with obesity, have risks of periprosthetic instability that may be secondary to hinge adduction on the thorax, but there are few reports on its impact on the range of motion (ROM). This study aimed to determine the influence of humeral liner constraint on impingement-free ROM and impingement type using an RSA computer simulation model. METHODS: A virtual simulation model was created using 3D measurement software for conducting a simulation study. This study included 25 patients with rotator cuff tears and rotator cuff tear arthropathy. Impingement-free ROM and impingement patterns were measured during flexion, extension, abduction, adduction, external rotation, and internal rotation. Twenty-five cases with a total of 4 patterns of 2 multiplied by 2, making a total of 100 simulations: glenosphere (38 mm normal type vs. lateralized type) and humeral liner constraint (normal type vs. constrained type). There were 4 combinations: normal glenosphere and normal humeral liner, normal glenosphere and constrained humeral liner, lateralized glenosphere and normal humeral liner, and lateralized glenosphere and constrained humeral liner. RESULTS: Significant differences were found in all impingement-free ROM in 1-way analysis of variance (abduction: P = .01, adduction: P < .01, flexion: P = .01, extension: P = .02, external rotation: P < .01, and internal rotation: P < .01). Tukey's post hoc tests showed that the impingement-free ROM was reduced during abduction, external rotation, and internal rotation with the combination of the normal glenosphere and constrained humeral liner compared with the other combinations, and improved by glenoid lateralization compared with the combination of the lateralized glenosphere and constrained humeral liner. In the impingement pattern, the Pearson χ2 test showed significantly greater proportion of impingement of the humeral liner into the superior part of the glenoid neck in abduction occurring in the combination of the normal glenosphere and constrained humeral liner group compared with the other groups (P < .01). Bonferroni post hoc tests revealed that the combination of the normal glenosphere and constrained humeral liner was significantly different from that of the lateralized glenosphere and constrained humeral liner (P < .01). Using constrained liners resulted in early impingement on the superior part of the glenoid neck in the normal glenosphere, whereas glenoid lateralization increased impingement-free ROM. CONCLUSION: This RSA computer simulation model demonstrated that constrained humeral liners led to decreased impingement-free ROM. However, using the lateralized glenosphere improved abduction ROM.

Efficacy of Early Rehabilitation for Severe Coronavirus Disease 2019 Pneumonia: Factor Analysis Using Machine Learning.

Objectives: Patients with severe coronavirus disease 2019 (COVID-19) who develop pneumonia face the risk of ventilatory muscle disuse in the acute phase, which can result in persistent respiratory impairments in the subacute phase. Although rehabilitation during the acute phase is considered effective, there are limited reports on this topic. Therefore, this study aimed to investigate the effectiveness of acute-phase rehabilitation in patients with severe COVID-19. Methods: The study included 57 patients (45 men and 12 women; mean age: 63.2±12.1 years) admitted between April and June 2021, all of whom required intubation for respiratory management. Among them, 34 patients underwent acute-phase rehabilitation interventions based on the early goal-directed mobilization protocol. The primary objectives were to assess the occurrence of medical accidents related to acute-phase rehabilitation and evaluate their impact on survival and mobility upon hospital discharge. Statistical techniques and machine learning algorithms were employed for data analysis. Results: Remarkably, no medical accidents occurred during the acute-phase rehabilitation among the patients. Furthermore, our findings indicated that acute-phase rehabilitation did not influence survival outcomes. However, it did have a positive impact on the mobility of patients upon hospital discharge. Conclusions: Acute-phase rehabilitation can be safely administered to patients with severe COVID-19 by following an early goal-directed mobilization protocol. This approach may also contribute to improved activities of daily living after discharge.

Mobile-bearing prosthesis suppresses the postoperative rotational mismatch and improves patient-reported outcome measurements better than fixed-bearing prosthesis: rotational analysis by 3D measurement in total knee arthroplasty.

INTRODUCTION: It is preferable to reduce postoperative excessive rotational mismatch between the femur and tibia that causes poor clinical results following total knee arthroplasty (TKA). The aim of this study is to compare postoperative rotational mismatches and clinical outcomes with mobile- and fixed-bearing prostheses. MATERIALS AND METHODS: This study classified 190 TKAs into two groups equally by propensity score matching: mobile-bearing group (n = 95) and fixed-bearing group (n = 95). Computed tomography images of the whole leg were taken at 2 weeks postoperatively. The component alignments, rotational mismatches between the femur and tibia, and rotations among components were measured three-dimensionally. The knee range of motion, New Knee Society Score (KSS) subjective sores, and Forgotten Joint Score (FJS-12) were assessed at the final follow-up. RESULTS: Rotational mismatch between the femur and tibia was significantly less in the mobile- (- 0.8° ± 7.3°) than in the fixed-bearing (3.3° ± 8.5°, p < 0.001) group. New KSS functional activity score was significantly poorer in patients with excessive rotational mismatch (61.3 ± 21.4) than in those without it (49.5 ± 20.6, p = 0.02). Comparing mobile-bearing prosthesis, the use of fixed-bearing prosthesis was a risk factor for postoperative excessive rotational mismatch (odds ratio: 2.32, p = 0.03). CONCLUSION: When compared to a fixed-bearing prosthesis, TKA using a mobile-bearing prosthesis could suppress the postoperative rotational mismatch between the femur and tibia that causes poor subjective functional activity score. However, since this study was conducted for PS-TKA, the results might not be applicable to other models.

Long-term clinical results of alumina ceramic medial pivot total knee arthroplasty: a 10-year follow-up study.

BACKGROUND: The newly-designed alumina ceramic medial pivot total knee prosthesis was introduced to reduce polyethylene wear and better fit the anatomical morphology of the Asian population. This study aimed to clarify the long-term clinical results of alumina medial pivot total knee arthroplasty over a minimum follow-up period of 10 years. METHODS: The data of 135 consecutive patients who underwent primary alumina medial pivot total knee arthroplasty were analyzed in this retrospective cohort study. Patients were examined over a minimum 10-year follow-up period. The knee range of motion, Knee Society Score (KSS) knee score, Knee Society Score function score, and radiological parameters were assessed. The survival rate was also evaluated by using reoperation and revision as endpoints. RESULTS: The mean follow-up period lasted 11.8 ± 1.4 years. Patients who were not followed accounted for 7.4% of the total cohort. Knee and function scores of KSS improved significantly following total knee arthroplasty (P < 0.001). In 27 individuals (28.1%), a radiolucent line was observed. Aseptic loosening occurred in three cases (3.1%). The survival rates for reoperation and revision were 94.8% and 95.8% 10 years after the operation, respectively. CONCLUSIONS: During a minimum 10-year follow-up period, the present model of alumina medial pivot total knee arthroplasty showed good clinical outcomes and survival rates.

The modification of bone cut angle and joint line obliquity did not change the tibiofemoral kinematics and stability of knee joint after total knee arthroplasty.

INTRODUCTION: Previous reports using cadaveric knees and musculoskeletal computer simulation have shown that kinematically aligned (KA) total knee arthroplasty (TKA) provides more natural and physiological tibiofemoral kinematic patterns than mechanically aligned (MA) TKA. These reports suggested that the modification of joint line obliquity improve the knee kinematics. This study aimed to determine whether joint line obliquity change the intraoperative tibiofemoral kinematics in TKA candidates with knee osteoarthritis. METHODS: Thirty consecutive knees with varus osteoarthritis that underwent TKA using a navigation system were evaluated. Two types of trial components were prepared: (1) MA TKA model: component trial in which articulating surface was parallel to the bone cut surface (2) KA TKA model: the femoral component trial, which mimicked the KA TKA method of Dossett et al. was designed 3° valgus and 3° internal rotation to the femoral bone cut surface, and the tibial component trial was designed 3° varus to the tibial bone cut surface. These two trials were set on the same knees during the operation, and the tibiofemoral rotational kinematics and varus-valgus laxity were measured from 0° to 120° of knee flexion using a navigation system. RESULTS: The joint gap was 20 ± 2 mm and 3° ± 1° varus in extension and 20 ± 2 mm and 3° ± 1°varus in flexion. The differences in femoral component rotation between KA TKA and MA TKA were not statistically significant for any knee flexion angle. The differences in varus-valgus laxity between KA TKA and MA TKA were also not statistically significant for any knee flexion angle. CONCLUSION: Although the degree of joint line obliquity varies widely in various KA TKA methods, this study, which mimicked the method of Dossett et al. showed that the modification of joint line obliquity did not change the tibiofemoral kinematics and stability of the knee joint in TKA candidates with knee osteoarthritis.

Perioperative Essential Amino Acid Supplementation Facilitates Quadriceps Muscle Strength and Volume Recovery After TKA: A Double-Blinded Randomized Controlled Trial.

BACKGROUND: Perioperative essential amino acid (EAA) supplementation suppresses lower-limb muscle atrophy and promotes functional improvement in the first 4 weeks after total knee arthroplasty (TKA). However, its effect on the recovery of muscle volume and strength in the intermediate term is unclear. The aim of this study was to evaluate the effect of perioperative EAA supplementation on the recovery of lower-limb muscle volume and strength in the 2 years after TKA. METHODS: Sixty patients who underwent unilateral TKA for primary knee osteoarthritis were included in this double-blinded randomized controlled trial. After excluding dropouts, 26 patients assigned to the EAA group (9 g/day) and 26 assigned to the placebo group (powdered lactose, 9 g/day) were available for analysis. Patients received EAA supplementation or a placebo from 1 week prior to surgery to 2 weeks after it. The rectus femoris muscle area was measured using ultrasonography and quadriceps muscle strength was measured isometrically with a handheld dynamometer, preoperatively and periodically up to 2 years postoperatively. Knee pain, knee range of motion, functional mobility, and Knee Society Score 2011 subjective scores were measured at each time point. Perioperative management, except for supplementation, was identical in the 2 groups. RESULTS: Taking the baseline as 100%, the mean values in the EAA and placebo groups were 134% ± 31% and 114% ± 27%, respectively, for the rectus femoris muscle area and 159% ± 54% and 125% ± 40% for the quadriceps muscle strength, respectively, at 2 years after surgery. The differences were significant (p < 0.05). Clinical outcomes were not significantly different between the 2 groups. CONCLUSIONS: Perioperative EAA supplementation contributes to the recovery of rectus femoris muscle volume and quadriceps muscle strength in the 2 years after TKA. The EAA supplementation did not impact clinical outcomes. LEVEL OF EVIDENCE: Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

Measurement of spinopelvic sagittal alignment in the relaxed seated position rather than in the straight seated position is suitable for assessing spinopelvic mobility in patients before total hip arthroplasty.

PURPOSE: The relationship between spinopelvic mobility and dislocation in total hip arthroplasty (THA) has recently attracted attention. This study aimed to investigate the differences in sacral slope (SS) between two types of upright seated positions and to determine which seated position was appropriate for assessing spinopelvic mobility (change in SS from standing to sitting) before THA. MATERIALS AND METHODS: This prospective cohort study included 75 hips from 75 patients who had undergone primary THA. Each patient underwent preoperative lateral spinopelvic radiography in standing (st) and two seated positions: relaxed (rs) and straight (ss). The change in SS between each position (Δ) was measured. RESULTS: Differences in all spinopelvic sagittal alignment parameters between the two seated positions were statistically significant (p < 0.001). The range, median, and mean values of ΔSSss-rs were -2.0° to 26.5°, 6.8°, and 8.3°, respectively. ΔSSss-rs was significantly correlated with SS, LLA, and PFA in the relaxed seated position (r = -0.52, -0.39, and 0.37; p < 0.001, p < 0.001, and p = 0.001, respectively), but was not correlated to these parameters in the straight seated position. Of the 52 patients with normal spinopelvic mobility in the relaxed seated position (ΔSSst-rs > 10°), 24 (46%) patients were misrepresented as having a stiff spine in the straight seated position (ΔSSst-ss < 10°). CONCLUSION: The change in SS from the straight to the relaxed seated position widely varied in patients before THA. The spinopelvic radiograph in the relaxed seated position is appropriate when evaluating spinopelvic mobility for preoperative planning.

A comparison of accuracy and safety between stem-first and cup-first total hip arthroplasty: a prospective randomised controlled trial.

BACKGROUND: The combined anteversion theory to prevent impingement in total hip arthroplasty (THA) has been proposed. However, because stem-anteversion is influenced by the native femoral anteversion and the stem flexion/extension angle, it is often difficult to adjust stem anteversion during surgery. Therefore, the stem-first (combined anteversion) technique may be useful to adjust and achieve appropriate cup anteversion during surgery with respect to the implanted stem anteversion angle. However, the technique may adversely affect cup or stem angle accuracy and result in intra-operative bleeding, post-operative adverse events, and prolonged operative time. It is inconclusive whether either the stem-first or cup-first technique is safe or accurate. Therefore, this study assessed the accuracy and safety of stem-first THA compared to those of cup-first THA. MATERIALS AND METHODS: This prospective randomised controlled trial analysed 114 patients who were randomly divided into 2 groups (stem-first group: n = 57, cup-first group (control group): n = 57). Primary outcomes included cup and stem angle, the discrepancies from the targeted angle and combined anteversion (evaluated via CT at 3 months postoperatively). Secondary outcomes included intraoperative blood loss, operative time, WOMAC, and adverse events. RESULTS: There were no significant differences in age, gender, BMI or in the primary and secondary outcomes between the 2 groups. CONCLUSIONS: Performing stem-first in THA did not adversely affect cup and stem angle accuracy, or result in intraoperative bleeding, prolongation of operative time, or postoperative adverse events. Thus, performing stem-first may be advantageous for achieving combined anteversion theory. TRIAL REGISTRATION: University Hospital Medical Information Network (UMIN) registration number UMIN000025189.

A double tapered fully hydroxyapatite-coated stem has less contact area to femoral cortical bone than a tapered-wedge stem: a three-dimensional computed tomography-based density mapping analysis.

INTRODUCTION: It is clinically important to analyze the initial contact state between an implant and femoral cortical bone as it affects clinical outcomes, such as stress shielding, stem subsidence, thigh pain, and patient-reported outcomes after total hip arthroplasty. Whether the initial contact state of a double-tapered fully hydroxyapatite (HA)-coated stem is achieved with the preserved cancellous or cortical bone remains to be established. This study aimed to compare the contact area with the femoral cortical bone between a double-tapered fully HA-coated stem (HA group) and a tapered wedge cementless stem (TW group) using three-dimensional computed tomography (3DCT)-based templating software. MATERIALS AND METHODS: Forty-seven total hip arthroplasties in the HA and TW groups each were retrospectively analyzed. The contact area between the implant and femoral cortical bone in the whole stem and at each Gruen zone was measured using density mapping with 3DCT-based templating software. RESULTS: The demographic data were not significantly different between the two groups. The contact area in the whole stem area was lower in the HA group (HA 5.4 ± 1.8% vs. TW 9.0 ± 4.8%, p < 0.01). The HA group had a lower contact area in zone 2 (HA 6.7 ± 6.5% vs. TW 15.6 ± 10.8%, p < 0.01) and zone 6 (HA 1.8 ± 3.5% vs. TW 6.3 ± 3.6%, p < 0.01) than the TW group. The implant type (ß = 0.41, p < 0.01) and stem coronal alignment (ß = - 0.29, p < 0.01) were significant predictors of the contact area in the whole stem area in a multiple regression analysis (adjusted R2 = 0.27, p < 0.01). CONCLUSION: The contact area of the double-tapered fully HA-coated stem was significantly lower than that of the tapered wedge cementless stem.

A new accelerometer-based portable navigation system provides high accuracy of acetabular cup placement in total hip arthroplasty in both the lateral decubitus and supine positions.

INTRODUCTION: No studies have compared the accuracy of acetabular cup placement in total hip arthroplasty (THA) in the supine and lateral decubitus positions using the same portable navigation system. Thus, this study aimed to compare the accuracy of acetabular cup placement using a new accelerometer-based portable navigation system combined with an infrared stereo camera and inertial measurement unit between the supine and lateral decubitus positions. MATERIALS AND METHODS: This retrospective study compared 45 THAs performed in the supine position (supine group) and 44 THAs performed in the lateral decubitus position (lateral group) using the same portable navigation system. The primary outcome was the absolute errors of cup placement angles, defined as the absolute values of the differences between cup radiographic inclination and anteversion angles displayed on the navigation system and those measured on postoperative computed tomography images. RESULTS: No significant difference in the median absolute error of the cup inclination angle (supine group 1.7° [interquartile range 0.8°-3.1°] vs. lateral group 2.1° [interquartile range 1.0°-3.7°]; p = 0.07) was found between the two groups. Similarly, no significant difference in the median absolute error of the anteversion angle (supine group 1.9° [interquartile range 0.8°-3.4°] vs. lateral group 2.1° [interquartile range 0.9°-3.1°]; p = 0.42) was found. CONCLUSION: This new accelerometer-based portable navigation system may provide high accuracy of the cup placement in THA in the lateral decubitus and supine positions.

Association of a Wider Medial Gap (Medial Laxity) in Flexion with Self-Reported Knee Instability After Medial-Pivot Total Knee Arthroplasty.

BACKGROUND: Medial-pivot total knee arthroplasty (TKA) is designed with high articular conformity in the medial compartment in order to achieve stability. The subjective outcome of patients has been reported to be good postoperatively; however, the association between the objective and subjective knee stability and the influence of subjective stability on the overall outcomes of TKA remained unknown. Our hypothesis was that postoperative flexion joint-gap imbalance could affect subjective knee instability following TKA in medial-pivot prostheses. The purpose of this study was to analyze the association between the joint gap in flexion and subjective knee instability and between subjective knee instability and outcomes following medial-pivot TKA. METHODS: A total of 769 patients who underwent primary TKA with use of medial-pivot prostheses were enrolled. Clinical outcomes included knee range of motion, Knee Society Score-2011 (KSS-2011), Forgotten Joint Score-12 (FJS-12), patient-reported subjective knee instability, and axial knee radiography to assess flexion joint-gap balance measured at the final follow-up. Clinical outcomes were compared between patients with and without subjective knee instability. Moreover, associated factors were analyzed for postoperative subjective knee instability. RESULTS: Overall, 177 patients (23%) reported experiencing postoperative subjective knee instability. Knee flexion (p = 0.04); KSS-2011 symptom (p<0.001), satisfaction (p<0.001), expectation (p=0.008), and activity (p<0.001) subscales; and FJS-12 (p < 0.001) were significantly worse in patients with subjective knee instability. The KSS-2011 subjective score differences were greater than the minimal clinically important difference. Older age at the time of surgery (odds ratio, 1.04; p = 0.04) and a wider postoperative joint gap in flexion on the medial side (odds ratio, 1.21; p = 0.001) were significant risk factors for subjective knee instability. A gap angle of -2.9° (i.e., medial laxity) was the threshold to predict postoperative knee instability (sensitivity, 0.29; specificity, 0.91). CONCLUSIONS: Postoperative flexion joint-gap laxity on the medial side following medial-pivot TKA affected the patient-reported subjective knee instability scores. Postoperative KSS-2011 subjective scores following medial-pivot TKA were poorer in patients with subjective knee instability. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Eldecalcitol regulates the gene expressions of articular cartilage markers and differentiation markers in chondrocytes.

Vitamin D has been shown to reduce symptoms in patients with osteoarthritis (OA). In a previous study, local administration of eldecalcitol, an active vitamin D3 analog, reduced degenerative changes in articular cartilage in the early phase of experimental OA. However, the target of vitamin D in OA remains unknown. Here, we investigated the effect of eldecalcitol treatment on chondrocytes, which were divided into superficial zone chondrocytes (SZC), deep zone chondrocytes (DZC), and differentiated chondrocytes. SZC and DZC were cultured in monolayer and 3D pellet cultures treated with eldecalcitol. The gene expressions of articular cartilage and chondrocyte differentiation markers were evaluated. Histological analysis of SZC and DZC 3D pellet cultures was performed. The results showed that the articular cartilage markers ETS-related gene (Erg) and lubricin/proteoglycan 4 (PRG4) were significantly increased in SZC, but not in DZC, in the monolayer culture treated with eldecalcitol. The chondrocyte differentiation markers type X collagen and alkaline phosphatase (ALP) were significantly decreased in the DZC pellet culture treated with eldecalcitol. Immunochemical analysis also showed that Erg and lubricin/PRG4 expressions were elevated in the SZC pellet culture treated with eldecalcitol, while type X collagen and ALP expressions were decreased in the DZC pellet culture treated with eldecalcitol. In conclusion, this study showed that eldecalcitol upregulated articular cartilage markers in SZC and suppressed differentiation markers in DZC. Such regulation of chondrocytes by eldecalcitol could be potentially effective against OA progression.

A cemented mobile-bearing total knee prosthesis prevents peri-prosthetic bone mineral density loss around the femoral component: a consecutive follow-up at a mean of 11 years.

PURPOSE: Research has shown that a cemented mobile-bearing component has a favorable effect on the bone mineral density (BMD) of the distal femur at 2 years after total knee arthroplasty (TKA). This study was performed to determine whether the advantage on BMD of a cemented mobile-bearing TKA over a conventional cemented fixed-bearing TKA changes with time. This report is an update of a matched cohort study initiated in 2004 and for which the 2-year results have been published. METHODS: Twenty-eight knees that were treated with a fixed-bearing posterior stabilized (PS) prosthesis and 28 matched knees from a database of 76 knees that were treated with a mobile-bearing PS prosthesis in the same period were investigated. All knees underwent dual-energy X-ray absorptiometry (DEXA) scans around the femoral component preoperatively, 2 weeks postoperatively, 5 years postoperatively, and annually thereafter. Eighteen knees with a cemented mobile-bearing PS prosthesis and 20 knees with a cemented fixed-bearing PS prosthesis were investigated for more than 6 years. The mean follow-up period was 11 years. RESULTS: The range of motion, Knee Society Score, BMD of the lumbar spine, and follow-up period were not significantly different preoperatively and postoperatively in the two groups. In the fixed-bearing group, the BMD of the anterior part of the femoral condyle decreased postoperatively. In the mobile-bearing group, the BMD of the posterior part of the femoral condyle increased postoperatively. The postoperative change in the BMD at 5 years and the latest follow-up period was statistically significant in the two groups. CONCLUSIONS: This DEXA study revealed that a cemented mobile-bearing component had a favorable effect on the BMD of the distal femur after TKA even at a mean of 11 years postoperatively. LEVEL OF EVIDENCE: Therapeutic study, level II, prospective comparative study.