Doxorubicin Interaction with Lipid Monolayers Leads to Decreased Membrane Stiffness when Experiencing Compression-Expansion Dynamics.

Physical membrane models permit to study and quantify the interactions of many external molecules with monitored and simplified systems. In this work, we have constructed artificial Langmuir single-lipid monolayers with dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylethanolamine (DPPE), dipalmitoylphosphatidylserine (DPPS), or sphingomyelin to resemble the main lipid components of the mammalian cell membranes. We determined the collapse pressure, minimum area per molecule, and maximum compression modulus (Cs-1) from surface pressure measurements in a Langmuir trough. Also, from compression/expansion isotherms, we estimated the viscoelastic properties of the monolayers. With this model, we explored the membrane molecular mechanism of toxicity of the well-known anticancer drug doxorubicin, with particular emphasis in cardiotoxicity. The results showed that doxorubicin intercalates mainly between DPPS and sphingomyelin, and less between DPPE, inducing a change in the Cs-1 of up to 34% for DPPS. The isotherm experiments suggested that doxorubicin had little effect on DPPC, partially solubilized DPPS lipids toward the bulk of the subphase, and caused a slight or large expansion in the DPPE and sphingomyelin monolayers, respectively. Furthermore, the dynamic viscoelasticity of the DPPE and DPPS membranes was greatly reduced (by 43 and 23%, respectively), while the reduction amounted only to 12% for sphingomyelin and DPPC models. In conclusion, doxorubicin intercalates into the DPPS, DPPE, and sphingomyelin, but not into the DPPC, membrane lipids, inducing a structural distortion that leads to decreased membrane stiffness and reduced compressibility modulus. These alterations may constitute a novel, early step in explaining the doxorubicin mechanism of action in mammalian cancer cells or its toxicity in non-cancer cells, with relevance to explain its cardiotoxicity.

Interaction mechanism of chitosan oligomers in pure water with cell membrane models studied by SFG vibrational spectroscopy.

Chitosan is a versatile and biocompatible cationic antimicrobial polymer obtained from sustainable sources that is effective against a wide range of microorganisms. Although it is soluble only at low pH, chitosan oligomers (ChitO) are soluble in pure water and thus more appropriate for antibacterial applications. Although there is a vast literature on chitosan's antimicrobial activity, the molecular details of its interaction with biomembranes remain unclear. Here we investigate these molecular interactions by resorting to phospholipid Langmuir films (zwitterionic DPPC and anionic DPPG) as simplified membrane models (for mammalian and bacterial membranes, respectively), and using SFG vibrational spectroscopy to probe lipid tail conformation, headgroup dynamics and interfacial water orientation. For comparison, we also investigate the interactions of another simple cationic antimicrobial polyelectrolyte, poly(allylamine) hydrochloride - PAH. By forming the lipid films over the polyelectrolyte solutions, we found that both have only a very small interaction with DPPC, but PAH adsorption is able to invert the interfacial water orientation (membrane potential). This might explain why ChitO is compatible with mammalian cells, while PAH is toxic. In contrast, their interaction with DPPG films is much stronger, even more so for ChitO, with both insertion within the lipid film and interaction with the oppositely charged headgroups. Again, PAH adsorption inverts the membrane potential, while ChitO does not. Finally, ChitO interaction with DPPG is weaker if the antimicrobial is injected underneath a pre-assembled Langmuir film, and its interaction mode depends on the time interval between end of film compression and ChitO injection. These differences between ChitO and PAH effects on the model membranes highlight the importance of molecular structure and intermolecular interactions for their bioactivity, and therefore this study may provide insights for the rational design of more effective antimicrobial molecules.

Enhanced chitosan effects on cell membrane models made with lipid raft monolayers.

Langmuir monolayers have been used as cell membrane models, where lipid composition is normally varied to mimic distinct types of membranes. For eukaryotic membranes, for instance, rather than using only zwitterionic phospholipids there is now a trend to employ mixtures to simulate the lipid rafts known to be relevant for various cellular processes. In this study, we demonstrate that effects from chitosans on Langmuir monolayers are considerably higher if lipid raft compositions (ternary mixtures of dipalmitoyl phosphatidyl choline (DPPC), sphingomyelin (SM) and cholesterol) are used. Significantly, measurable effects on the surface pressure isotherms start at 10-6 mg mL-1 for chitosans in lipid rafts, to be compared with 10-2 mg mL-1 for neat dipalmitoyl phosphatidylcholine (DPPC). This applies to both a commercial chitosan and chitosans soluble at physiological pH. Incorporation of these chitosans in the raft monolayers was confirmed in polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) experiments, where both the tail groups and headgroups were found to interact with chitosan. Since the effects on membrane models may be observed at such small concentrations for chitosans and probably other molecules, some studies may have to be revisited where neat phospholipids should be replaced by lipid raft compositions.

Genosensor made with a self-assembled monolayer matrix to detect MGMT gene methylation in head and neck cancer cell lines.

DNA methylation is involved in the oncogenesis of head and neck squamous cell carcinoma and could be used for early detection of cancer to increase the chances of cure, but unfortunately diagnosis is usually made at late stages of the disease. In this work we developed genosensors to detect DNA methylation of the MGMT gene in head and neck cancer cell lines. The probe for MGMT promoter methylation was immobilized on gold electrodes modified with 11-mercaptoundecanoic acid (11-MUA) self-assembled monolayers (SAM). Detection was performed with electrochemical impedance spectroscopy, with clear distinction between methylated and non-methylated DNA from head and neck cell lines. The genosensor is sensitive with a low detection limit of 0.24 × 10-12 mol L-1. In addition, the cell lines FaDu, JHU28 and SCC25 for the MGMT gene, could be distinguished from the HN13 cell line which has a high degree of MGMT methylation (97%), thus confirming the selectivity. Samples with different percentages of MGMT DNA methylation could be separated in multidimensional projections using the visualization technique interactive document mapping (IDMAP). The genosensor matrix and the immobilization procedures are generic, and can be extended to other DNA methylation biomarkers.

Polymer Solar Cells-Interfacial Processes Related to Performance Issues.

Harnessing solar energy with solar cells based on organic materials (in particular polymeric solar cells) is an attractive alternative to silicon-based solar cells due to the advantages of lower weight, flexibility, lower manufacturing costs, easier integration with other products, low environmental impact during manufacturing and operations and short energy payback times. However, even with the latest efficiencies reported up to 17%, the reproducibility of these efficiencies is not up to par, with a significant variation in the efficiencies reported across the literature. Since these devices are based on ultrathin multilayer organic films, interfaces play a major role in their operation and performance. This review gives a concise account of the major interfacial issues that are responsible for influencing the device performance, with emphasis on their physical mechanisms. After an introduction to the basic principles of polymeric solar cells, it briefly discusses charge generation and recombination occurring at the donor-acceptor bulk heterojunction interface. It then discusses interfacial morphology for the active layer and how it affects the performance and stability of these devices. Next, the formation of injection and extraction barriers and their role in the device performance is discussed. Finally, it addresses the most common approaches to change these barriers for improving the solar cell efficiency, including the use of interface dipoles. These issues are interrelated to each other and give a clear and concise understanding of the problem of the underperformance due to interfacial phenomena occurring within the device. This review not only discusses some of the implemented approaches that have been adopted in order to address these problems, but also highlights interfacial issues that are yet to be fully understood in organic solar cells.

Interaction of Water with the Gypsum (010) Surface: Structure and Dynamics from Nonlinear Vibrational Spectroscopy and Ab Initio Molecular Dynamics.

Water-mineral interfaces are important for several environmental, industrial, biological, and geological processes. Gypsum, CaSO4·2H2O, is a widespread mineral of high technological, medical, and environmental relevance, but little is known about its surface structure and its interaction with water. A molecular-level understanding of gypsum/water interface is given here by a combined experimental/theoretical study. We investigate the structure and dynamics of water adsorbed from vapor on the gypsum (010) single-crystal surface at room temperature, combining sum-frequency generation (SFG) vibrational spectroscopy experiments and ab initio molecular dynamics (AIMD) simulations. The SFG spectra of gypsum at low relative humidity (RH) show an anisotropic arrangement of structural water molecules and the presence of dangling OH groups. The AIMD simulations allow a detailed assignment of the SFG spectra and show that the cleaved (010) surface rearranges to have only 25% of the OH groups pointing away from the surface. At higher RHs, the first adsorbed water layer binds to these OH groups and forms an anisotropic arrangement, but with the amount of free OH groups significantly suppressed and without any significant diffusion. Upon adsorption of a second water layer, although the topmost layer of molecules is more disordered and dynamic than the previous one, its structure is still influenced by the gypsum surface underneath because it has a much reduced amount of free OH groups with respect to the free surface of water, and a slower surface diffusion with respect to bulk water. The theoretical results corroborate the experimental ones and provide an accurate atomic characterization of the surface structure.

Differences in the Aspect Ratio of Gold Nanorods that Induce Defects in Cell Membrane Models.

Understanding the interactions between biomolecules and nanomaterials is of great importance for many areas of nanomedicine and bioapplications. Although studies in this area have been performed, the interactions between cell membranes and nanoparticles are not fully understood. Here, we investigate the interactions that occur between the Langmuir monolayers of dipalmitoylphosphatidyl glycerol (DPPG) and dipalmitoylphosphatidyl choline (DPPC) with gold nanorods (NR)-with three aspect ratios-and gold nanoparticles. Our results showed that the aspect ratio of the NRs influenced the interactions with both monolayers, which suggest that the physical morphology and electrostatic forces govern the interactions in the DPPG-NR system, whereas the van der Waals interactions are predominant in the DPPC-NR systems. Size influences the expansion isotherms in both systems, but the lipid tails remain conformationally ordered upon expansion, which suggests phase separation between the lipids and nanomaterials at the interface. The coexistence of lipid and NP regions affects the elasticity of the monolayer. When there is coexistence between two phases, the elasticity does not reflect the lipid packaging state but depends on the elasticity of the NP islands. Therefore, the results corroborate that nanomaterials influence the packing and the phase behavior of the mimetic cell membranes. For this reason, developing a methodology to understand the membrane-nanomaterial interactions is of great importance.

Molecular ordering of PAH/MA-co-DR13 azopolymer layer-by-layer films probed by second-harmonic generation.

Molecular orientation within azopolymer thin films is important for their nonlinear optical properties and photonic applications. We have used optical second-harmonic generation (SHG) to study the molecular orientation of Layer-by-Layer (LbL) films of a cationic polyelectrolyte (poly(allylamine hydrochloride)) and an anionic polyelectrolyte containing azochromophore side groups (MA-co-DR13) on a glass substrate. The SHG measurements indicate that there is a preferential orientation of the azochromophores in the film, leading to a significant optical nonlinearity. However, both the signal strength and its anisotropy are not homogeneous throughout the sample, indicating the presence of large orientational domains. This is corroborated with Brewster angle microscopy. The average SHG signal does not increase with film thickness, in contrast to some reports in the literature, indicating an independent orientational order for successive bilayers. Analyzing the SHG signal as a function of the input and output polarizations, a few parameters of the azochromophore orientational distribution can be deduced. Fitting the SHG signal to a simple model distribution, we have concluded that the chromophores have an angular distribution with a slight in-plane anisotropy and a mean polar angle ranging from 45° to 80° with respect to substrate normal direction, with a relatively large width of about 25°. These results show that SHG is a powerful technique for a detailed investigation of the molecular orientation in azopolymer LbL films, allowing a deeper understanding of their self-assembling mechanism and nonlinear optical properties. The inhomogeneity and anisotropy of these films may have important consequences for their applications in nonlinear optical devices.

Probing the Molecular Ordering and Thermal Stability of Azopolymer Layer-by-Layer Films by Second-Harmonic Generation.

Polyelectrolyte layer-by-layer (LbL) films have many applications, but several parameters and procedures during film fabrication determine their morphology and molecular arrangement, with important practical consequences. Here we have used optical second-harmonic generation (SHG) to investigate the molecular ordering of LbL films containing the anionic azopolymer PS-119 and the cationic polyelectrolyte PAH. We show that spontaneous drying leads to laterally homogeneous and isotropic films, while the opposite occurs for nitrogen-flow drying. The effect of film thickness and pH of the assembling/rinsing solutions on the molecular ordering was also investigated. The optical nonlinearity tends to significantly decrease for thicker films (∼10 bilayers), and a slight alternation of SHG intensity for films with odd or even number of layers (complete vs incomplete bilayers) was also observed, which results from the reorientation of azopolymer groups in the last layer after adsorption of an additional PAH layer. We propose a qualitative electrostatic model to explain the pH dependence of film growth and azopolymer orientation, which is based on changes of the charge density of the substrate and PAH and on different ionic screening of electrostatic interactions at various pH values. We also found that the nonlinear response presents a gradual and significant reduction upon heating, which is inconsistent with a glass transition temperature for these ultrathin LbL films. The thermal stability is improved with a combination of low ionic strength and higher charge density of the polyelectrolytes and substrate, which promotes better interlayer complexation. The SHG signal is recovered upon cooling, although for some conditions the molecular arrangement became anisotropic after a heating/cooling cycle. Such detailed information about the structural order of thin nonlinear optical azopolymer LbL films demonstrates that SHG is a powerful technique to probe the film structure at the molecular level, with important consequences for their applications in optical devices.

Experimental evidence for the mode of action based on electrostatic and hydrophobic forces to explain interaction between chitosans and phospholipid Langmuir monolayers.

The interaction between chitosans and Langmuir monolayers mimicking cell membranes has been explained with an empirical scheme based on electrostatic and hydrophobic forces, but so far this has been tested only for dimyristoyl phosphatidic acid (DMPA). In this paper, we show that the mode of action in such a scheme is also valid for dipalmitoyl phosphatidyl choline (DPPC) and dipalmitoyl phosphatidyl glycerol (DPPG), whose monolayers were expanded and their compressibility modulus decreased by interacting with chitosans. In general, the effects were stronger for the negatively charged DPPG in comparison to DPPC, and for the low molecular weight chitosan (LMWChi) which was better able to penetrate into the hydrophobic chains than the high molecular weight chitosan (Chi). Penetration into the hydrophobic chains was confirmed with polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and sum frequency generation (SFG) spectroscopy. A slight reduction in conformational order of the lipid chains induced by the chitosans was quantitatively estimated by measuring the ratio between the intensities of the methyl (r(+)) and methylene (d(+)) peaks in the SFG spectra for DPPG. The ratio decreased from 35.6 for the closely packed DPPG monolayer to 7.0 and 6.6 for monolayers containing Chi and LMWChi, respectively. Since in both cases there was a significant phospholipid monolayer expansion, the incorporation of chitosans led to chitosan-rich and lipid-rich condensed domains, which mantained conformational order for their hydrophobic tails. The stronger effects from LMWChi are ascribed to an easier access to the hydrophobic tails, as corroborated by measuring aggregation in solution with dynamic light scattering, where the hydrodynamic radius for LMWChi was close to half of that for Chi. Taken together, the results presented here confirm that the same mode of action applies to different phospholipids that are important constituents of mammalian (DPPC) and bacterial (DPPG) cell membranes.

Semifluorinated thiols in Langmuir monolayers - a study by nonlinear and linear vibrational spectroscopies.

A series of semifluorinated thiols of the general formula CmF2m+1CnH2nSH (abbr. FmHnSH) have been synthesized and characterized in Langmuir monolayers with surface pressure-area isotherms, complemented with polarization-modulated reflection absorption spectroscopy (PM-IRRAS) and sum-frequency generation (SFG) techniques. A comparative analysis was performed for compounds having the same length of fluorinated segment (F10) and variable length of the hydrogenated part (H6, H10, H12), and having identical hydrogenated segment (H12) connected to a fluorinated moiety of different lengths (F6, F8, F10). For the sake of comparison, an alkanethiol (H18SH) was also examined, and F10H10COOH and F10H10OH molecules were used for helping the assignment of SFG spectra of CH stretches. SFG was applied to investigate the hydrocarbon chain and the terminal CF3 group, while PM-IRRAS was used to probe CF2 groups. The number of gauche defects in the hydrocarbon chain increased with the increasing length of the molecule, either by elongation of the hydrogenated or perfluorinated part. SFG measurements recorded at three polarization combinations (ppp, ssp, sps) enabled us to estimate the tilt angle of the terminal CF3 group in semifluorinated thiol molecules as ranging from 35° to 45°, which is consistent with nearly vertical fluorinated segments. Upon increasing the surface pressure, the fluorinated segment gets slightly more upright, but the hydrocarbon chain tilt increases while keeping the same average number of gauche defects. The extent of disorder in the hydrogenated segment may be controlled by varying the size of the fluorinated segment, and this could be exploited for designing functionalized surfaces with insertion of other molecules in the defect region.

Chitosan does not inhibit enzymatic action of human pancreatic lipase in Langmuir monolayers of 1,2-didecanoyl-glycerol (DDG).

In this study, we tested the hypothesis according to which chitosan reduces lipid digestion by blocking the access of lipases to ingested fat. Because lipase action takes place mostly at interfaces, we produced Langmuir films of 1,2-didecanoyl-glycerol (DDG), which is the substrate for human pancreatic lipase (HPL). The experimental assays were carried out in acidic medium, at pH 3.0, to ensure that chitosan is completely soluble. Chitosan was found to affect strongly the surface activity of HPL that forms a Gibbs monolayer at the air/water interface, but did not inhibit the enzymatic action of HPL toward the DDG monolayer. The latter was observed using two surface-specific spectroscopic techniques, namely polarization-modulated infrared reflection-absorption and sum-frequency generation (SFG). The extension of DDG hydrolysis calculated using SFG spectroscopy was 33% in the absence of chitosan, and ranged from 29 to 50% in the presence of chitosan at concentrations of 0.20 g L(-1) and 0.30 g L(-1), respectively. Therefore, fat "protection" by chitosan is unlikely to be an important factor in fat reduction.

Interaction of para-tert-butylcalix[6]arene molecules in Langmuir films with cadmium ions and their effects on molecular conformation and surface potential.

In this paper, we employ the surface-specific polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and sum-frequency generation (SFG) methods with surface pressure and surface potential isotherms to determine the organization of p-tert-butylcalix[6]arene molecules and their interaction with Cd(2+) ions in Langmuir monolayers. The area per molecule was estimated to be 135 Å(2), which corresponds to the Calix6 axis perpendicular to the air-water interface with most OH groups parallel to the interface. This area is larger than predicted by molecular modeling with quantum chemical calculations with a PM3 Hamiltonian (109 Å(2)), which is ascribed to the repulsion between Calix6 molecules. The incorporation of Cd(2+) ions in the subphase leads to drastic changes in the dipole moment contribution of the monolayer surface potential. Rather than increasing with incorporation of Cd(2+) ions owing to a decrease in the negative double-layer potential, the measured surface potential decreased monotonically with increasing ion concentration. This unexpected result was ascribed to a strong interaction with Cd(2+) ions that induced the calyx of the molecule to adopt a more open conformation at the air/water interface and affected the orientation of hydration water molecules, according to the SFG data. This finding allows us to understand the reason why the Gouy-Chapman model fails to explain surface potential results for subphases containing divalent or trivalent ions, and may be relevant for the application of calixarenes in sensing.

Amperometric detection of lactose using ß-galactosidase immobilized in layer-by-layer films.

A direct, low-cost method to determine the concentration of lactose is an important goal with possible impact in various types of industry. In this study, a biosensor is reported that exploits the specific interaction between lactose and the enzyme ß-galactosidase (ß-Gal) normally employed to process lactose into glucose and galactose for lactose-intolerant people. The biosensor was made with ß-Gal immobilized in layer-by-layer (LbL) films with the polyelectrolyte poly(ethylene imine) (PEI) and poly(vinyl sufonate) (PVS) on an indium tin oxide (ITO) electrode modified with a layer of Prussian Blue (PB). With an ITO/PB/(PEI/PVS)1(PEI/ß-Gal)30 architecture, lactose could be determined with an amperometric method with sensitivity of 0.31 µA mmol(-1) cm(-2) and detection limit of 1.13 mmol L(-1), which is sufficient for detecting lactose in milk and for clinical exams. Detection occurred via a cascade reaction involving glucose oxidase titrated as electrolytic solution in the electrochemical cell, while PB allowed for operation at 0.0 V versus saturated calomel electrode, thus avoiding effects from interfering species. Sum-frequency generation spectroscopy data for the interface between the LbL film and a buffer containing lactose indicated that ß-Gal lost order, which is the first demonstration of structural effects induced by the molecular recognition interaction with lactose.

Vibrational spectroscopy for probing molecular-level interactions in organic films mimicking biointerfaces.

Investigation into nanostructured organic films has served many purposes, including the design of functionalized surfaces that may be applied in biomedical devices and tissue engineering and for studying physiological processes depending on the interaction with cell membranes. Of particular relevance are Langmuir monolayers, Langmuir-Blodgett (LB) and layer-by-layer (LbL) films used to simulate biological interfaces. In this review, we shall focus on the use of vibrational spectroscopy methods to probe molecular-level interactions at biomimetic interfaces, with special emphasis on three surface-specific techniques, namely sum frequency generation (SFG), polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and surface-enhanced Raman scattering (SERS). The two types of systems selected for exemplifying the potential of the methods are the cell membrane models and the functionalized surfaces with biomolecules. Examples will be given on how SFG and PM-IRRAS can be combined to determine the effects from biomolecules on cell membrane models, which include determination of the orientation and preservation of secondary structure. Crucial information for the action of biomolecules on model membranes has also been obtained with PM-IRRAS, as is the case of chitosan removing proteins from the membrane. SERS will be shown as promising for enabling detection limits down to the single-molecule level. The strengths and limitations of these methods will also be discussed, in addition to the prospects for the near future.

The elasticity of soap bubbles containing wormlike micelles.

Slow-motion imaging of the rupture of soap bubbles generally shows the edges of liquid films retracting at a constant speed (known as the Taylor-Culick velocity). Here we investigate soap bubbles formed from simple solutions of a cationic surfactant (cetyltrimethylammonium bromide - CTAB) and sodium salicylate. The interaction of salicylate ions with CTAB leads to the formation of wormlike micelles (WLM), which yield a viscoelastic behavior to the liquid film of the bubble. We demonstrate that these elastic bubbles collapse at a velocity up to 30 times higher than the Taylor-Culick limit, which has never been surpassed. This is because during the bubble inflation, the entangled WLM chains stretch, storing elastic energy. This extra energy is then released during the rupture of the bubble, yielding an additional driving force for film retraction (besides surface tension). This new mechanism for the bursting of elastic bubbles may have important implications to the breakup of viscoelastic sprays in industrial applications.

Cholesterol mediates chitosan activity on phospholipid monolayers and Langmuir-Blodgett films.

The polysaccharide chitosan has been largely used in many biological applications as a fat and cholesterol reducer, bactericide agent, and wound healing material. While the efficacy for some of such uses is proven, little is known about the molecular-level interactions involved in these applications. In this study, we employ mixed Langmuir and Langmuir-Blodgett (LB) films of negatively charged dimyristoyl phosphatidic acid (DMPA) and cholesterol as cell membrane models to investigate the role of cholesterol in the molecular-level action of chitosan. Chitosan does not remove cholesterol from the monolayer. The interaction with chitosan tends to expand the DMPA monolayer due to its interpenetration within the film. On the other hand, cholesterol induces condensation of the DMPA monolayer. The competing effects cause the surface pressure isotherms of mixed DMPA-cholesterol films on a chitosan subphase to be unaffected by the cholesterol mole fraction, due to distinct degrees of chitosan penetration into the film in the presence of cholesterol. By combining polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and sum-frequency generation spectroscopy (SFG), we showed that chitosan induces order into negatively charged phospholipid layers, whereas the opposite occurs for cholesterol. In conclusion, chitosan has its penetration in the film modulated by cholesterol, and electrostatic interactions with negatively charged phospholipids, such as DMPA, are crucial for the action of chitosan.

Molecular ordering of layer-by-layer polyelectrolyte films studied by sum-frequency vibrational spectroscopy.

The molecular arrangement in organic thin films is crucial for their increasing technological applications. Here, we use vibrational spectroscopy by sum-frequency generation (SFG) to study the ordering of polyelectrolyte layers adsorbed on silica for all steps of layer-by-layer (LbL) self-assembly. In situ measurements during adsorption and rinsing showed that the adsorbed polymer has a disordered conformation and confirmed surface charge overcompensation upon polyelectrolyte adsorption by probing the interfacial electric field. In dry films, the polymer chains acquired a net orientational ordering, which was affected, however, by the adsorption of subsequent layers. Such a detailed characterization may allow the control of LbL film structure and functionality with unprecedented power.

Molecular view of the interaction between iota-carrageenan and a phospholipid film and its role in enzyme immobilization.

Proteins incorporated into phospholipid Langmuir-Blodgett (LB) films are a good model system for biomembranes and enzyme immobilization studies. The specific fluidity of biomembranes, an important requisite for enzymatic activity, is naturally controlled by varying phospholipid compositions. In a model system, instead, LB film fluidity may be varied by covering the top layer with different substances able to interact simultaneously with the phospholipid and the protein to be immobilized. In this study, we immobilized a carbohydrate rich Neurospora crassa alkaline phosphatase (NCAP) in monolayers of the sodium salt of dihexadecylphosphoric acid (DHP), a synthetic phospholipid that provides very condensed Langmuir films. The binding of NCAP to DHP Langmuir-Blodgett (LB) films was mediated by the anionic polysaccharide iota-carrageenan (iota-car). Combining results from surface isotherms and the quartz crystal microbalance technique, we concluded that the polysaccharide was essential to promote the interaction between DHP and NCAP and also to increase the fluidity of the film. An estimate of DHP:iota-car ratio within the film also revealed that the polysaccharide binds to DHP LB film in an extended conformation. Furthermore, the investigation of the polysaccharide conformation at molecular level, using sum-frequency vibrational spectroscopy (SFG), indicated a preferential conformation of the carrageenan molecules with the sulfate groups oriented toward the phospholipid monolayer, and both the hydroxyl and ether groups interacting preferentially with the protein. These results demonstrate how interfacial electric fields can reorient and induce conformational changes in macromolecules, which may significantly affect intermolecular interactions at interfaces. This detailed knowledge of the interaction mechanism between the enzyme and the LB film is relevant to design strategies for enzyme immobilization when orientation and fluidity properties of the film provided by the matrix are important to improve enzymatic activity.

Stability and interface properties of thin cellulose ester films adsorbed from acetone and ethyl acetate solutions.

Stability and interface properties of cellulose acetate propionate (CAP) and cellulose acetate butyrate (CAB) films adsorbed from acetone or ethyl acetate onto Si wafers have been investigated by means of contact angle measurements and atomic force microscopy (AFM). Surface energy (gamma(S)(total)) values determined for CAP adsorbed from acetone are larger than those from ethyl acetate. In the case of CAB films adsorbed from ethyl acetate and acetone were similar. Dewetting was observed by AFM only for CAP films prepared from ethyl acetate. Positive values of effective Hamaker constant (A(eff)) were found only for CAP prepared from ethyl acetate, corroborating with dewetting phenomena observed by AFM. On the contrary, negative values of A(eff) were determined for CAP and CAB prepared from acetone and for CAB prepared from ethyl acetate, corroborating with experimental observations. Sum frequency generation (SFG) vibrational spectra indicated that CAP and CAB films prepared from ethyl acetate present more alkyl groups oriented perpendicularly to the polymer-air interface than those films prepared from acetone. Such preferential orientation corroborates with macroscopic contact angle measurements. Moreover, SFG spectra showed that acetone binds strongly to Si wafers, creating a new surface for CAP and CAB films.