Alkylphenol and bisphenol A contamination of urban runoff: an evaluation of the emission potentials of various construction materials and automotive supplies.

Alkylphenol (AP) and bisphenol A (BPA) contamination of urban runoff has already been established. Potential sources of these contaminants in runoff are endogenous to the urban watershed and are mainly related to traffic and leaching from construction materials. This article summarizes the results of experimental work carried out on a selection of building materials, automotive materials, and consumables, which can be in contact with rain, to assess their potential emission of alkylphenols, alkylphenol ethoxylates, and bisphenol A into runoff. 36 samples of materials, new and used, across 7 major families of building materials (PVC, concrete, polycarbonate, SBS-modified bitumen, drainage materials) and automotive materials (body, tires) were subjected to leaching tests with methanol and then, for a selection of them, with water. Automotive fluids were also directly analyzed. The results demonstrate the ubiquitous presence of APs and BPA in urban materials and their extractable character with water. The compounds with the strongest emission rates were bisphenol A and nonylphenol. The most important BPA emissions into water (10 to 300 ng/g) were measured for polycarbonate, tires, some car bodies, and PVC. Nonylphenol was leached in large quantities (1 to 10 ng/g) from PVC, some concretes, SBS-modified bitumen, and body samples. The tires were the only materials having a strong emission in octylphenol (1 to 10 ng/g). The analysis of automotive fluids confirmed the presence of BPA (0.3 to 5.5 g/L) and nonylphenol (2.3 to 2.9 mg/L) in brake fluids, while APs and BPA were found at trace levels in coolants and windscreen washer. Graphical abstract ᅟ.

Assessing the relation between anthropogenic pressure and PAH concentrations in surface water in the Seine River basin using multivariate analysis.

Understanding the relation between polycyclic aromatic hydrocarbons (PAHs) in freshwater and anthropogenic pressure is fundamental to finding a solution to reduce the presence of PAHs in water, and thus their potential impact on aquatic life. In this paper we propose to gain greater insight into the variability, sources and partitioning of PAHs in labile (or freely dissolved=not associated to the organic matter), dissolved and particulate phases in freshwater. This study was conducted using land use data as a marker of anthropogenic pressure and coupling it with chemical measurements. This study was conducted on 30 sites in the Seine River basin, which is subjected to a strong human impact and exhibits a wide range of land uses. Half of the sites were studied twice. Labile PAHs were measured by semi-permeable membrane devices (SPMDs), and dissolved and particulate phases by grab samples. Partial least squares regressions were performed between chemical measurements and data of anthropogenic pressure. The results indicate different sources for the dissolved phase and particles. Dissolved and labile phases were more related to the population density of the watershed, while particles were more related to a local pressure. Season and land use data are necessary information to correctly interpret and compare PAH concentrations from different sites. Furthermore, the whole data set of the 45 field deployments comprising labile, dissolved, total and particulate PAH concentrations as well as the physico-chemical parameters is available in the supplementary information.