ABSTRACT
An injector of fast deuterium atoms for plasma heating was designed and installed at the Tokamak à Configuration Variable (TCV). The neutral beam can deliver 1 MW power to the plasma in 2 s pulses. An ion beam of the injector is formed by a triode multislit ion-optical system with spherical electrodes which provide ballistic focusing. Tests at TCV revealed that the total angular divergence of the neutral beam across the slits exceeded the expected value more than twice. It was finally established that this increase in divergence was caused by the asymmetry of the chamfers at the slit edges of the plasma electrode. The redesigned shape of the slits of the plasma grid together with precise machining significantly improved the beam quality. Experimental testing proved that the neutral beam profile in the direction across the grid slits became very close to the expected value.
ABSTRACT
A plane cathode composed of close-packed hexagonal LaB6 (lanthanum hexaboride) segments is described. The 6 cm diameter circular cathode is heated by radiation from a graphite foil flat spiral. The cathode along with a hollow copper anode is used for the arc discharge plasma production in a newly developed linear plasma device. A separately powered coil located around the anode is used to change the magnetic field strength and geometry in the anode region. Different discharge regimes were realized using this coil.
ABSTRACT
The paper reviews the results of development of steady-state arc-discharge plasma generator with directly heated LaB6 cathode. This arc-discharge plasma generator produces a plasma jet which is to be converted into an atomic one after recombination on a metallic plate. The plate is electrically biased relative to the plasma in order to control the atom energies. Such an intensive jet of hydrogen atoms can be used in negative ion sources for effective production of negative ions on a cesiated surface of plasma grid. All elements of the plasma generator have an augmented water cooling to operate in long pulse mode or in steady state. The thermo-mechanical stresses and deformations of the most critical elements of the plasma generator were determined by simulations. Magnetic field inside the discharge chamber was optimized to reduce the local power loads. The first tests of the steady-state arc plasma generator prototype have performed in long-pulse mode.
ABSTRACT
The status and the executing modernization of RUssian Diagnostic Injector (RUDI) are described. The ion source consists of arc plasma emitter and multiaperture four-electrode ion optical system. The present ion optical system with round beamlets is to be replaced by new slit apertures system for the reducing beam angular divergence in one direction. Due to enlarged dimensions and transparency of new ion optical system the extracted ion beam current will be by 50% increased. For the extension of beam pulse duration from 4 s to 8-10 s an optimized metal-ceramic arc-discharge channel is introduced. In the paper, the optical measurements results of beam parameters, including the profile of species distribution, scanned by custom-built multichannel spectroscope, are also presented.