Interstitial lung disease is a dominant feature in patients with circulating myositis-specific antibodies.

BACKGROUND: Many patients with polymyositis (PM) or dermatomyositis (DM) have circulating myositis-specific antibodies (MSAs). Interstitial lung disease (ILD) is a common manifestation of PM/DM, and it can even precede the onset of characteristic muscle or skin manifestations. Furthermore, there appear to be some patients with ILD and circulating MSAs who do not develop muscle or skin disease even after prolonged follow-up. We sought to determine whether ILD is equally or more common than myositis or dermatitis at the time of initial detection of MSAs. METHODS: We identified all patients found to have circulating MSAs at our institution over a 4-year period and assessed for the presence of lung, muscle, and skin disease at the time of initial detection of MSAs. Among those found to have ILD, we compared demographic and clinical features, chest CT scan findings, and outcomes between those with PM/DM-associated ILD and those with ILD but no muscle or skin disease. RESULTS: A total of 3078 patients were tested for MSAs, and of these 40 were positive. Nine different MSAs were detected, with anti-histidyl tRNA synthetase (anti-Jo-1) being the most common (35% of MSAs). Among patients with positive MSAs, 86% were found to have ILD, compared to 39% and 28% with muscle and skin involvement, respectively (p < 0.001). Fifty percent of all MSA-positive patients had isolated ILD, with no evidence of muscle or skin disease. Those with isolated ILD were more likely to be older and have fibrotic changes on chest CT, less likely to receive immunomodulatory therapy, and had worse overall survival. CONCLUSIONS: In this study we found that individuals with circulating MSAs were more likely to have ILD than classic muscle or skin manifestations of PM/DM at the time of initial detection of MSAs. Our findings suggest that the presence of ILD should be considered a disease-defining manifestation in the presence of MSAs and incorporated into classification criteria for PM/DM.

Assessment of Correlation between Clinical Parameters and Pulp Canal Pathogens in Endodontic Pathologies: A Microbiological Study.

INTRODUCTION: Success and failure of root canal therapy is largely dependent on the clinician and the patient. Once the tooth is restored into its functional and esthetic place, the root canal therapy is considered to be complete. It is a well-known fact that root canal space acts as a rich reservoir for microorganisms. Past studies show that root canal harbors an array of different microorganisms. Streptococcus mitis and Enterococcus faecalis have been found to be the most prevalent microorganisms isolated from the infected pulp canal space. Hence, we evaluated the association of endodontic signs and symptoms with root canal pathogens. MATERIALS AND METHODS: A total of 120 patients were selected for the study and divided broadly into two groups: Group I containing patients with primary infection and group II containing patients in which retreatment was required. Both groups contained 60 patients each. Clinical parameters recorded for the study are pain, tenderness on percussion, swelling, periapical radiolucency on radiographic analysis, caries, sinus formation, and tooth mobility. After assessment, opening, and initial filing, sterile paper points were inserted into the root canal space for collection of microbiological sample, which was further send to laboratory for cultural analysis. All the results were analyzed by Statistical Package for the Social Sciences (SPSS) software. Student's t-test and Fisher's exact test were used to evaluate the level of significance. RESULTS: While comparing the mean age of the patients in the two groups, no significant association was seen. Statistically significant results were obtained while comparing the association between pain and S. mitis. Positive correlation was seen on comparing the association between tenderness on percussion and E. faecalis. Also, a positive association was seen between periapical radiolucency and S. mitis. CONCLUSION: Strong positive correlation exists between S. mitis and E. faecalis and endodontic signs and symptoms. CLINICAL SIGNIFICANCE: Sound knowledge regarding the association of microbes of root canal and specific endodontic signs and symptoms could help therapeutic management of root canal infections effectively.

A Stereomicroscopic Evaluation of Dentinal Cracks at Different Instrumentation Lengths by Using Different Rotary Files (ProTaper Universal, ProTaper Next, and HyFlex CM): An Ex Vivo Study.

Introduction. The aim of the present study was to evaluate the dentinal cracks after root canal preparation with rotary files: Gates Glidden, ProTaper Universal, ProTaper Next, and HyFlex CM at different instrumentation lengths. Methodology. Sixty-five mandibular premolars were mounted in the acrylic tube with simulated periodontal ligaments and the apex was exposed. The root canals were instrumented with different rotary files, namely, ProTaper Universal, ProTaper Next, and HyFlex CM, to the major apical foramen (AF), short AF, and beyond AF. The root apex was stained with 1% methylene blue dye and digital images of apical surface of every tooth were taken and development of dentinal defects was determined by using stereomicroscope. Multinomial logistic regression test was performed to identify influencing factors. Results. Instrumentation with rotary files terminated 2 mm short AF and did not cause any cracks. Significantly less cracks were seen when instrumentation with rotary files terminated 1 mm short apical foramen when compared with the instrumentation terminated at or beyond apical foramen (p < 0.05). Conclusion. ProTaper Universal rotary files caused more dentinal cracks than ProTaper Next and HyFlex CM. Instrumentation short AF reduced the risk of dentinal defects.

The effect of irrigating solutions on the apical sealing ability of MTA Fillapex and Adseal root canal sealers.

Background. Maximum sealing ability or adhesion of endodontic sealers can be achieved after effective removal of the smear layer. Endodontic irrigants assist in adequate removal of the smear layer, improving the retention mechanism. The aim of this study was to evaluate the effect of two different root canal irrigation solutions (5.25% NaOCl followed by 17% EDTA and QMix) on the apical sealing ability of two different root canal sealers (MTA Fillapex and Adseal). Methods. Forty-six single-canal teeth were divided into 4 experimental groups of 10 teeth each and a positive and negative group of 3 teeth each. The root canals were prepared using step-back technique. The teeth in groups 1 and 2 were irrigated with 5.25% NaOCl followed by 17% EDTA and the teeth in groups 3 and 4 were irrigated with QMix. Finally all the teeth were flushed with sterile saline and dried using paper points. Obturation was accomplished by gutta-percha using lateral condensation technique. MTA Fillapex sealer was used in groups 1 and 3 whereas Adseal was used in groups 2 and 4. Dye penetration method was used to evaluate apical leakage. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests using SPSS 14. Statistical significance was set at P < 0.05. Results. Group 3 showed maximum amount of apical leakage (3.7±0.3 mm) whereas group 2 exhibited the least amount of apical leakage (2.1 ± 0.4 mm) among all the experimental groups. Significant differences were found in the amount of apical leakage between all the groups (P = 0.00001). Conclusion. Within the limitations of this study, 5.25% sodium hypochlorite followed by 17% EDTA and Adseal resulted in the best apical seal.

Apical extrusion of debris and irrigants using ProTaper hand, M-two rotary and WaveOne single file reciprocating system: An ex vivo study.

AIMS: The purpose of this ex vivo study was to evaluate and compare the weight of debris and volume of irrigant extruded apically from teeth using different preparation techniques. SUBJECTS AND METHODS: Thirty extracted human mandibular premolars with single canals and similar lengths were instrumented using hand ProTaper F2 (25, 0.08; Dentsply Maillefer, Ballaigues, Switzerland), M-two (25, 0.06; VDW, Munich, Germany) and WaveOne Primary (25, 0.08; Dentsply Maillefer, Ballaigues, Switzerland). Debris and irrigant extruded during instrumentation were collected into preweighed Eppendorf tubes. The volume of the irrigant was measured, and then the tubes were stored in an incubator at 70°C for 2 days. The Eppendorf tubes were weighed to obtain the final weight when the extruded debris was included. Three consecutive weights were obtained for each tube. STATISTICAL ANALYSIS USED: Data were statistically analyzed by one-way analysis of variance and Student's t-test. RESULTS: There were no statistically significant differences among the groups. The WaveOne reciprocating system showed the maximum amount of apical extrusion of debris and irrigant among all the groups. The least amount of debris and irrigant was observed in ProTaper hand instrument (P > 0.05). CONCLUSION: All instrumentation techniques were associated with debris and irrigant extrusion.

A comparative evaluation of the effect of various additives on selected physical properties of white mineral trioxide aggregate.

AIMS: This study examined the setting time, compressive strength, and pH of white mineral trioxide aggregate (MTA) mixed with various additives: Calcium chloride (CaCl2), calcium formate (CaF), disodium hydrogen orthophosphate (Na2HPO4). MATERIALS AND METHODS: Group 1 (Control) was obtained by mixing MTA with distilled water. In Groups 2 and 3, MTA containing 10% CaCl2 and 20% CaF, respectively, was mixed with distilled water. In Group 4, MTA was mixed with 15% Na2HPO4. Setting time, compressive strength, and pH of each group were examined. STATISTICAL ANALYSIS USED: Analysis was done using Statistical Package for Social Sciences (SPSS) version 14. A P-value < 0.05 was considered statistically significant. Comparison of mean values was done using analysis of variance (ANOVA) with post-hoc Games-Howell test. RESULTS: The setting time of test groups were significantly shorter than that of control group (P < 0.001). The compressive strengths of test groups were lower than that of control group (P < 0.001). The pH value obtained for Groups 3 and 4 were higher than that of the control group (P < 0.001). CONCLUSIONS: Study result showed that additives significantly reduced the setting time of MTA and also maintained the pH at a high value. However, there was not much improvement in the compressive strength of the material.