Metal-Organic Framework- and Polyoxometalate-Based Sorbents for the Uptake and Destruction of Chemical Warfare Agents.

The threat of chemical warfare agents (CWAs), assured by their ease of synthesis and effectiveness as a terrorizing weapon, will persist long after the once-tremendous stockpiles in the U.S. and elsewhere are finally destroyed. As such, soldier and civilian protection, battlefield decontamination, and environmental remediation from CWAs remain top national security priorities. New chemical approaches for the fast and complete destruction of CWAs have been an active field of research for many decades, and new technologies have generated immense interest. In particular, our research team and others have shown metal-organic frameworks (MOFs) and polyoxometalates (POMs) to be active for sequestering CWAs and even catalyzing the rapid hydrolysis of agents. In this Forum Article, we highlight recent advancements made in the understanding and evaluation of POMs and Zr-based MOFs as CWA decontamination materials. Specifically, our aim is to bridge the gap between controlled, solution-phase laboratory studies and real-world or battlefield-like conditions by examining agent-material interactions at the gas-solid interface utilizing a multimodal experimental and computational approach. Herein, we report our progress in addressing the following research goals: (1) elucidating molecular-level mechanisms of the adsorption, diffusion, and reaction of CWA and CWA simulants within a series of Zr-based MOFs, such as UiO-66, MOF-808, and NU-1000, and POMs, including Cs8Nb6O19 and (Et2NH2)8[(α-PW11O39Zr(µ-OH)(H2O))2]·7H2O, (2) probing the effects that common ambient gases, such as CO2, SO2, and NO2, have on the efficacy of the MOF and POM materials for CWA destruction, and (3) using CWA simulant results to develop hypotheses for live agent chemistry. Key hypotheses are then tested with targeted live agent studies. Overall, our collaborative effort has provided insight into the fundamental aspects of agent-material interactions and revealed strategies for new catalyst development.

Correlated Multimodal Approach Reveals Key Details of Nerve-Agent Decomposition by Single-Site Zr-Based Polyoxometalates.

Development of technologies for protection against chemical warfare agents (CWAs) is critically important. Recently, polyoxometalates have attracted attention as potential catalysts for nerve-agent decomposition. Improvement of their effectiveness in real operating conditions requires an atomic-level understanding of CWA decomposition at the gas-solid interface. We investigated decomposition of the nerve agent Sarin and its simulant, dimethyl chlorophosphate (DMCP), by zirconium polytungstate. Using a multimodal approach, we showed that upon DMCP and Sarin exposure the dimeric tungstate undergoes monomerization, making coordinatively unsaturated Zr(IV) centers available, which activate nucleophilic hydrolysis. Further, DMCP is shown to be a good model system of reduced toxicity for studies of CWA deactivation at the gas-solid interface.

Homeward bound: the safety of discharging postappendectomy patients directly home from the recovery room.

The discharge of the patients directly from the recovery room after appendectomy has only recently been described in the literature. Because the 30-day readmission rate is used as a surrogate for safety and as a means to identify complications from appendicitis, it is our aim to demonstrate that the 30-day readmission rate of patients with acute appendicitis discharged from the recovery room is not higher than that of a control group and that from other studies in the literature for traditional hospital discharge. The operating room electronic database at Kaiser Riverside and Kaiser Moreno Valley hospitals was used to identify all appendectomies from September 1, 2008, to April 30, 2013. During that span, 2044 appendectomies were performed. Eight hundred seventy (43%) were discharged from the recovery room. Of these patients, 861 (99%) had a laparoscopic appendectomy. The average time from anesthesia end time until discharge from the recovery room was 2 hours 42 minutes. There were 12 (1.4%) total readmissions with nine (1%) related to previous appendectomy compared with one (0.9%) in the control group. None of the readmissions were the result of early life-threatening problems such as bleeding, bowel injury, intraperitoneal bladder injury, or stump leak. Patients with acute appendicitis who were discharged home from the recovery room did not have an increased incidence of 30-day readmission when compared with traditional hospital discharge.

Enzymatic- and iridium-catalyzed asymmetric synthesis of a benzothiazepinylphosphonate bile acid transporter inhibitor.

A synthesis of the benzothiazepine phosphonic acid 3, employing both enzymatic and transition metal catalysis, is described. The quaternary chiral center of 3 was obtained by resolution of ethyl (2-ethyl)norleucinate (4) with porcine liver esterase (PLE) immobilized on Sepabeads. The resulting (R)-amino acid (5) was converted in two steps to aminosulfate 7, which was used for construction of the benzothiazepine ring. Benzophenone 15, prepared in four steps from trimethylhydroquinone 11, enabled sequential incorporation of phosphorus (Arbuzov chemistry) and sulfur (Pd(0)-catalyzed thiol coupling) leading to mercaptan intermediate 18. S-Alkylation of 18 with aminosulfate 7 followed by cyclodehydration afforded dihydrobenzothiazepine 20. Iridium-catalyzed asymmetric hydrogenation of 20 with the complex of [Ir(COD)2BArF] (26) and Taniaphos ligand P afforded the (3R,5R)-tetrahydrobenzothiazepine 30 following flash chromatography. Oxidation of 30 to sulfone 31 and phosphonate hydrolysis completed the synthesis of 3 in 12 steps and 13% overall yield.

Synthesis of HCV replicase inhibitors: base-catalyzed synthesis of protected α-hydrazino esters and selective aerobic oxidation with catalytic Pt/Bi/C for synthesis of imidazole-4,5-dicarbaldehyde.

A robust convergent synthesis of the prodrugs of HCV replicase inhibitors 1-5 is described. The central 5H-imidazo[4,5-d]pyridazine core was formed from acid-catalyzed cyclocondensation of an imidazole-4,5-dicarbaldehyde (20) and a α-hydrazino ester, generated in situ from the bis-BOC-protected precursors 25 and 33. The acidic conditions not only released the otherwise unstable α-hydrazino esters but also were the key to avoid facile decarboxylation to the parent drugs from the carboxylic ester prodrugs 1-5. The bis-BOC α-hydrazino esters 25 and 33 were prepared by addition of ester enolates (from 23 and 32) to di-tert-butyl azodicarboxylate via catalysis with mild inorganic bases, such as Li2CO3. A selective aerobic oxidation with catalytic 5% Pt-Bi/C in aqueous KOH was developed to provide the dicarbaldehyde 20 from the diol 27.

Copper-catalyzed asymmetric hydrogenation of aryl and heteroaryl ketones.

High throughput screening enabled the development of a Cu-based catalyst system for the asymmetric hydrogenation of prochiral aryl and heteroaryl ketones that operates at H2 pressures as low as 5 bar. A ligand combination of (R,S)-N-Me-3,5-xylyl-BoPhoz and tris(3,5-xylyl)phosphine provided benzylic alcohols in good yields and enantioselectivities. The electronic and steric characteristics of the ancillary triarylphosphine were important in determining both reactivity and selectivity.

An enyne cycloisomerization approach to the triple reuptake inhibitor GSK1360707F.

The triple reuptake inhibitor GSK1360707F was synthesized via an efficient and scalable route that features an enyne cycloisomerization reaction catalyzed by either Pt(II) or Au(I). Key aspects of this work such as the choice of the nitrogen protecting group and initial enantioselectivity studies are discussed.

Concise synthesis, preparative resolution, absolute configuration determination, and applications of an atropisomeric biaryl catalyst for asymmetric acylation.

A new three-step synthesis and resolution of nucleophilic catalyst 1 suitable for large-scale preparation has been developed, and this catalyst has been shown to be effective for the kinetic resolution and asymmetric desymmetrization of a range of sec-alcohol substrates.

The Co-CH(3) Bond in Imine/Oxime B(12) Models. Influence of the Orientation and Donor Properties of the trans Ligand As Assessed by FT-Raman Spectroscopy.

Near-IR FT-Raman spectroscopy was used to probe the properties of three types of methyl imine/oxime B(12) model compounds in CHCl(3) solution. These types differ in the nature of the 1,3-propanediyl chain and were selected to test the influence of electronic and steric effects on the Co-CH(3) stretching (nu(Co)(-)(CH)()3) frequency, a parameter related to Co-C bond strength. For the first type studied, [LCo((DO)(DOH)pn)CH(3)](0/+) ((DO)(DOH)pn = N(2),N(2)(')-propane-1,3-diylbis(2,3-butanedione 2-imine 3-oxime)), nu(Co)(-)(CH)()3 decreased from 505 to 455 cm(-)(1) with stronger electron-donating character of the trans axial ligand, L, in the order Cl(-), MeImd, Me(3)Bzm, 4-Me(2)Npy, py, 3,5-Me(2)PhS(-), PMe(3), and CD(3)(-). This series thus allows the first assessment of the effect of negative axial ligands on nu(Co)(-)(CH)()3; these ligands (L = Cl(-), 3,5-Me(2)PhS(-), CD(3)(-)) span the range of trans influence. The CH(3) bending (delta(CH3)) bands were observed at 1171, 1159, and 1150/1105 cm(-)(1), respectively. The decrease in C-H stretching frequencies (nu(CH)) of the axial methyl suggests that the C-H bond strength decreases in the order Cl(-) > 3,5-Me(2)PhS(-) > CD(3)(-). This result is consistent with the order of decreasing (13)C-(1)H NMR coupling constants obtained for the axial methyl group. The trend of lower nu(Co)(-)(CH)()3 and nu(CH) frequencies and lower axial methyl C-H coupling constant for stronger electron-donating trans axial ligands can be explained by changes in the electronic character of the Co-C bond. The symmetric CH(3)-Co-CH(3) mode (nu(CH)()3(-)(Co)(-)(CH)()3) for (CH(3))(2)Co((DO)(DOH)pn) was determined to be 456 cm(-)(1) (421 cm(-)(1) for (CD(3))(2)Co((DO)(DOH)pn). The L-Co-CH(3) bending mode (delta(L)(-)(Co)(-)(CH)()3) was detected for the first time for organocobalt B(12) models; this mode, which is important for force field calculations, occurs at 194 cm(-)(1) for ClCo((DO)(DOH)pn)CH(3) and at 186 cm(-)(1) for (CH(3))(2)Co((DO)(DOH)pn. The nu(Co)(-)(CH)()3 frequencies were all lower than those reported for the corresponding cobaloxime type LCo(DH)(2)CH(3) (DH = monoanion of dimethylglyoxime) models for planar N-donor L. This relationship is attributed to a steric effect of L in [LCo((DO)(DOH)pn)CH(3)](+). The puckered 1,3-propanediyl chain in [LCo((DO)(DOH)pn)CH(3)](+) forces the planar L ligands to adopt a different orientation compared to that in the cobaloxime models. The consequent steric interaction bends the equatorial ligand toward the methyl group (butterfly bending); this distortion leads to a longer Co-C bond. In a second imine/oxime type, a pyridyl ligand is connected to the 1,3-propanediyl chain and oriented so as to minimize butterfly bending. The nu(Co)(-)(CH)()3 frequency for this new lariat model was close to that of pyCo(DH)(2)CH(3). In a third type, a bulkier 2,2-dimethyl-1,3-propanediyl group replaces the 1,3-propanediyl chain. The nu(Co)(-)(CH)()3 bands for two complexes with L = Me(3)Bzm and py were 2-5 cm(-)(1) lower in frequency than those of the corresponding [L(Co((DO)(DOH)pn)CH(3)](+) complexes. The decrease in the axial nu(Co)(-)(CH)()3 frequencies is probably due to the steric effect of the equatorial ligand. Thus, the nu(Co)(-)(CH)()3 frequency can be useful for investigating both steric and electronic influences on the Co-C bond.