A standardized, incremental protocol to increase human tolerance to the cross-coupled illusion.

BACKGROUND: Humans can adapt to the "Coriolis" cross-coupled illusion with repeated exposure, improving the tolerability of faster spin rates and enabling short-radius, intermittent centrifugation for artificial gravity implementation. OBJECTIVE: This investigation assesses the criticality of personalization in acclimation to the cross-coupled illusion. METHODS: We used the median stimulus sequence of our previous effective and tolerable personalized, threshold-based protocol to develop a standardized (non-personalized) approach. During each of 10, 25-minute sessions, the spin rate was incremented independent of whether each subject reported experiencing the cross-coupled illusion. RESULTS: In comparison to the previous personalized protocol, the standardized protocol resulted in significantly reduced acclimation to the cross-coupled illusion (17.7 RPM threshold for the personalized protocol versus 11.8 RPM threshold for the standardized) and generally increased motion sickness reports (average reporting of 1.08/20 (personalized) versus 1.98/20 (standardized)), on average. However, the lack of individualization also leads to significantly less variance in subjects' acclimation. CONCLUSIONS: These findings are critical for future missions that may require several astronauts to be acclimated concurrently, due to resource and time constraints. Assessing feasibility of fast spin rate, short-radius centrifugation is crucial for the future of artificial gravity implementation during spaceflight.

Tolerable acclimation to the cross-coupled illusion through a 10-day, incremental, personalized protocol.

BACKGROUNDArtificial gravity (AG) has the potential to provide a comprehensive countermeasure mitigating deleterious effects of microgravity. However, the cross-coupled "Coriolis" illusion has prevented using a more feasible and less costly short-radius centrifuge, as compared to large, slowly spinning systems.OBJECTIVEWe assessed tolerability of a personalized, incremental protocol to acclimate humans to the cross-coupled illusion, enabling faster spin rates.METHODSTen subjects were exposed to the illusion by performing roll head tilts while seated upright and spun about an Earth-vertical axis. The spin rate was incremented when head tilts did not subjectively elicit the illusion. Subjects completed one 25-minute session on each of 10 days.RESULTSThe spin rate at which subjects felt no cross-coupled illusion increased in all subjects from an average of 1.8 rotations per minute (RPM) (SD: ±0.9) at the beginning of the protocol to 17.7 RPM (SD: ±9.1) at the end. For off-axis centrifugation producing 1G at the rider's feet, this corresponds to a reduction in the required centrifuge diameter from 552.2 to 5.7 meters. Subjects reported no more than slight motion sickness.CONCLUSIONSAcclimation to the cross-coupled illusion, such as that accomplished here, is critical for feasibility of short-radius centrifugation for AG implementation.

Reducing the Dispersion of Periodic Structures with Twist and Polar Glide Symmetries.

In this article, a number of guiding structures are proposed which take advantage of higher symmetries to vastly reduce the dispersion. These higher symmetries are obtained by executing additional geometrical operations to introduce more than one period into the unit cell of a periodic structure. The specific symmetry operations employed here are a combination of p-fold twist and polar glide. Our dispersion analysis shows that a mode in a structure possessing higher symmetries is less dispersive than in a conventional structure. It is also demonstrated that, similar to the previously studied Cartesian glide-symmetric structures, polar glide-symmetric structures also exhibit a frequency independent response. Promising applications of these structures are leaky-wave antennas which utilize the low frequency dependence.

Omnidirectional surface wave cloak using an isotropic homogeneous dielectric coating.

The field of transformation optics owes a lot of its fame to the concept of cloaking. While some experimental progress has been made towards free-space cloaking in three dimensions, the material properties required are inherently extremely difficult to achieve. The approximations that then have to be made to allow fabrication produce unsatisfactory device performance. In contrast, when surface wave systems are the focus, it has been shown that a route distinct from those used to design free-space cloaks can be taken. This results in very simple solutions that take advantage of the ability to incorporate surface curvature. Here, we provide a demonstration in the microwave regime of cloaking a bump in a surface. The distortion of the shape of the surface wave fronts due to the curvature is corrected with a suitable refractive index profile. The surface wave cloak is fabricated from a metallic backed homogeneous dielectric waveguide of varying thickness, and exhibits omnidirectional operation.

Lenses on curved surfaces.

This Letter presents a theory that allows graded index lenses to be mapped onto arbitrary rotationally symmetric curved surfaces. Examples of the Luneburg and Maxwell fish-eye lens are given, for numerous surfaces, always resulting in isotropic permittivity requirements. The performance of these lenses is initially illustrated with full-wave simulations utilizing a waveguide structure. A transformation of the refractive index profiles is then performed to design surface-wave lenses, where the dielectric layer is not only isotropic but also homogenous, demonstrating the applicability and ease of fabrication.

Removing singular refractive indices with sculpted surfaces.

The advent of Transformation Optics established the link between geometry and material properties, and has resulted in a degree of control over electromagnetic fields that was previously impossible. For waves confined to a surface it is known that there is a simpler, but related, geometrical equivalence between the surface shape and the refractive index, and here we demonstrate that conventional devices possessing a singularity - that is, the requirement of an infinite refractive index - can be realised for waves confined to an appropriately sculpted surface. In particular, we redesign three singular omnidirectional devices: the Eaton lens, the generalized Maxwell Fish-Eye, and the invisible sphere. Our designs perfectly reproduce the behaviour of these singular devices, and can be achieved with simple isotropic media of low refractive index contrast.

Perfect surface wave cloaks.

This Letter presents a method for making an uneven surface behave as a flat surface. This allows an object to be concealed (cloaked) under an uneven portion of the surface, without disturbing the wave propagation on the surface. The cloaks proposed in this Letter achieve perfect cloaking that only relies upon isotropic radially dependent refractive index profiles, contrary to those previously published. In addition, these cloaks are very thin, just a fraction of a wavelength in thickness, yet can conceal electrically large objects. While this paper focuses on cloaking electromagnetic surface waves, the theory is also valid for other types of surface waves. The performance of these cloaks is simulated using dielectric filled waveguide geometries, and the curvature of the surface is shown to be rendered invisible, hiding any object positioned underneath. Finally, a transformation of the required dielectric slab permittivity was performed for surface wave propagation, demonstrating the practical applicability of this technique.

Antimicrobial activity of tryptanthrins in Escherichia coli.

Tryptanthrins have potential therapeutic activity against a wide variety of pathogenic organisms, although little is known about their mechanism. Activity against Escherichia coli, however, has not been examined. The effects of tryptanthrin (indolo[2,1-b]quinazolin-6,12-dione) and nine derivatives on growth, survival, and mutagenesis in E. coli were examined. Analogues with a nitrogen atom at the 4-position of tryptanthrin stopped log phase growth of E. coli cultures at concentrations as low as 5 microM. Tryptanthrins decreased viability during incubation with cells in buffer by factors of 10(-2) to <10(-6) at 0.2-40 microM. Derivatives with an oxime group at the 6-position exhibited the greatest bactericidal activity. Most tryptanthrins were not mutagenic in several independent assays, although the 4-aza and 4 aza-8-fluoro derivatives increased frameshift mutations about 22- and 4-fold, respectively. Given the structure of trypanthrins, binding to DNA may occur by intercalation. From analysis using a sensitive linking number assay, several tryptanthrins, especially the 4-aza and 6-oximo derivatives, intercalate into DNA.