Unexpected nascent atmospheric emissions of three ozone-depleting hydrochlorofluorocarbons.

Global and regional atmospheric measurements and modeling can play key roles in discovering and quantifying unexpected nascent emissions of environmentally important substances. We focus here on three hydrochlorofluorocarbons (HCFCs) that are restricted by the Montreal Protocol because of their roles in stratospheric ozone depletion. Based on measurements of archived air samples and on in situ measurements at stations of the Advanced Global Atmospheric Gases Experiment (AGAGE) network, we report global abundances, trends, and regional enhancements for HCFC-132b ([Formula: see text]), which is newly discovered in the atmosphere, and updated results for HCFC-133a ([Formula: see text]) and HCFC-31 ([Formula: see text]ClF). No purposeful end-use is known for any of these compounds. We find that HCFC-132b appeared in the atmosphere 20 y ago and that its global emissions increased to 1.1 Gg⋅y-1 by 2019. Regional top-down emission estimates for East Asia, based on high-frequency measurements for 2016-2019, account for ∼95% of the global HCFC-132b emissions and for ∼80% of the global HCFC-133a emissions of 2.3 Gg⋅y-1 during this period. Global emissions of HCFC-31 for the same period are 0.71 Gg⋅y-1 Small European emissions of HCFC-132b and HCFC-133a, found in southeastern France, ceased in early 2017 when a fluorocarbon production facility in that area closed. Although unreported emissive end-uses cannot be ruled out, all three compounds are most likely emitted as intermediate by-products in chemical production pathways. Identification of harmful emissions to the atmosphere at an early stage can guide the effective development of global and regional environmental policy.

Improvement of safflower oil quality for biodiesel production by integrated application of PGPR under reduced amount of NP fertilizers.

Safflower is an important industrial oil seed and bioenergy crop in semi-arid subtropical regions due to its potential to grow on marginal land and having good percentage of seed oil contents which is an important parameter for biofuel production. However, it is an ignored crop in Pakistan. In order to improve the crop productivity and reduce the use of agrochemicals for sustainable biodiesel feedstock production, an experiment was conducted for two years to improve the fatty acid composition and oil quality of Carthamus tinctorius L. (safflower) by the inoculation of Azospirillum and Azotobacter alone as well as in combined application with nitrogen and phosphate (NP) fertilizers on cultivars Thori and Saif-32 under field conditions. Separation and quantification of fatty acids were done on precise comprehensive two-dimensional gas chromatography (GC×GC). The results showed that fatty acid profile specifically monounsaturated fatty acids i-e oleic acid (C18:1) was significantly improved by Azospirillum supplemented with the quarter dose of NP fertilizers (SPQ) with concomitant decrease in polyunsaturated fatty acids by the respective treatment. Oil quality attributes such as acid value, saponification number, iodine value, refractive index and free fatty acid contents were reduced by the application of Azotobacter and Azospirillum in combination with half and quarter doses of NP fertilizers treatments (BTH, SPH, BTQ and SPQ). The reduction in these variables is positively linked with improved biodiesel yield and quality. It can be concluded that application of Azospirillum and Azotobacter not only reduced the use of NP fertilizers up to 50%-75% but also improved the oil quality in order to obtain environment friendly, sustainable and green fuel.

Evaluation of quadrupole-time-of-flight mass spectrometry in comprehensive two-dimensional gas chromatography.

Quadrupole time-of-flight mass spectrometry (Q-TOFMS) has been evaluated with respect to its applicability in comprehensive two-dimensional gas chromatography (GC×GC). At a maximum acquisition frequency, while approximately 50 full accurate mass spectra on disk were acquired per s (50Hz) in scan mode, the sampling rate in target mode (MS/MS) was strongly dependent on the number of target ions selected. The number of selected precursor ions per time window proportionally decreased the acquisition rate for each ion; one precursor ion ≅31.35Hz; two ions ≅16.68Hz; and for 8 precursor ions, a sampling rate of just 4.18Hz was found. When Q-TOFMS was used in simultaneous mode, where in addition to the acquisition of target ion MS/MS signals, it also collects the full mass spectrum, sampling rates were even lower. It is demonstrated that Q-TOFMS generates sufficient data points over each peak in GC×GC operation in scan mode using TOFMS acquisition only, or is able to collect sufficient data points for relatively wide chromatographic peaks (≥600ms) in the target mode (MS/MS), however only if one or two precursor ions are selected per time window. Mass accuracy was found to perform within specification (<5ppm), even for the fastest acquisition operation (50Hz). Spectral deconvolution is demonstrated to work better in GC×GC than in 1D GC mode. Data visualisation in target GC×GC mode presents difficulties when there are overlapping target windows comprising different numbers of precursor ions.

Combined effects of gamma-irradiation and modified atmosphere packaging on quality of some spices.

Thyme (Thymus vidgaris L.), rosemary (Rosmarinus officinalis L.), black pepper (Piper nigrum L.) and cumin (Cuminum cyminum L.) in ground form were packaged in either air or 100% N2 and γ-irradiated at 3 different irradiation levels (7kGy, 12kGy, 17kGy). Total viable bacterial count, yeast and mould count, colour, essential oil yield and essential oil composition were determined. Microbial load was not detectable after 12kGy irradiation of all samples. Irradiation resulted in significant changes in colour values of rosemary and black pepper. The discolouration of the irradiated black pepper was lower in modified atmosphere packaging (MAP) compared to air packaging. Essential oil yield of irradiated black pepper and cumin was lower in air packaging compared to MAP. Gamma-irradiation generally decreased monoterpenes and increased oxygenated compounds, but the effect was lower in MAP. Overall, spices should be irradiated under an O2-free atmosphere to minimise quality deterioration.

Multidimensional and comprehensive two-dimensional gas chromatography of dichloromethane soluble products from a high sulfur Jordanian oil shale.

A high sulfur Jordanian oil shale was converted into liquid hydrocarbons by reaction at 390 °C under N2, and the dichloromethane soluble fraction of the products was isolated then analyzed by using gas chromatography (GC). Comprehensive two-dimensional GC (GC×GC) and multidimensional GC (MDGC) were applied for component separation on a polar - non-polar column set. Flame-ionization detection (FID) was used with GC×GC for general sample profiling, and mass spectrometry (MS) for component identification in MDGC. Multidimensional GC revealed a range of thiophenes (th), benzothiophenes (bth) and small amounts of dibenzothiophenes (dbth) and benzonaphthothiophenes (bnth). In addition, a range of aliphatic alkanes and cycloalkanes, ethers, polar single ring aromatic compounds and small amounts of polycyclic aromatics were also identified. Some of these compound classes were not uniquely observable by conventional 1D GC, and certainly this is true for many of their minor constituent members. The total number of distinct compounds was very large (ca.>1000). GC×GC was shown to be appropriate for general sample profiling, and MDGC-MS proved to be a powerful technique for the separation and identification of sulfur-containing components and other polar compounds.

Evaluation of comprehensive two-dimensional gas chromatography with flame photometric detection: potential application for sulfur speciation in shale oil.

Flame photometric detection in the sulfur channel has been evaluated for sulfur speciation and quantification in comprehensive two-dimensional gas chromatography [GC × GC-FPD(S)] for S-compound speciation in shale extracts. Signal non-linearity and potential quenching effects were reportedly major limitations of this detector for analysis of sulfur in complex matrices. However, reliable linear relationships with correlation coefficient >0.99 can be obtained if the sum of the square root of each modulation slice in GC × GC is plotted vs. sulfur concentration. Furthermore, the quenching effects are reduced due to essentially complete separation of S-containing components from the hydrocarbon matrix. An increase of S/N of up to 150 times has been recorded for benzothiophene and dibenzothiophene in GC × GC-FPD when compared to GC-FPD due to the modulation process. As a consequence, 10 times lower detection limits were observed in the former mode. The applicability of the method was demonstrated using shale oil sample extracts. Three sulfur classes were completely separated and the target class (thiophenes) was successfully quantified after the rest of the sample was diverted to the second detector by using a heart-cut strategy. Based on the proposed method, 70% of the sulfur in the shale oil was assigned to the thiophenes, 24% to benzothiophenes, and 5% to dibenzothiophene compounds.

Fast comprehensive two-dimensional gas chromatography method for fatty acid methyl ester separation and quantification using dual ionic liquid columns.

Safflower oil is a complex mixture of C18 saturated and unsaturated fatty acids amongst other fatty acids, and achieving separation between these similar structure components using one dimensional gas chromatography (GC) may be difficult. This investigation aims to obtain improved separation of fatty acid methyl esters in safflower oil, and their quantification using comprehensive two-dimensional GC (GC×GC). Here, GC×GC separation is accomplished by the coupling of two ionic liquid (IL) column phases: the combination of SLB-IL111 with IL59 column phases was finally selected since it provided excellent separation of a FAME standard mixture, as well as fatty acids in safflower and linseed oil, compared to other tested column sets. Safflower oil FAME were well separated in a short run of 16min. FAME validation was demonstrated by method reproducibility, linearity over a range up to 500mgL(-1), and limits of detection which ranged from 1.9mgL(-1) to 5.2mgL(-1) at a split ratio of 20:1. Quantification was carried out using two dilution levels of 200-fold for major components and 20-fold for trace components. The fatty acids C15:0 and C17:0 were not reported previously in safflower oil. The SLB-IL111/IL59 column set proved to be an effective and novel configuration for separation and quantification of vegetable and animal oil fatty acids.

Quantitative preparative gas chromatography of caffeine with nuclear magnetic resonance spectroscopy.

Caffeine test solute was employed in combination with an internal standard (IS), 1,4-dimethoxybenzene, in preparative-gas chromatography (prep-GC), with nuclear magnetic resonance (NMR) experiments. The IS served to: (i) quantify the trapping efficiency of an external trapping assembly, consisting of a capillary column cryotrap at the end of the analytical column; (ii) quantify the solute response in different NMR samples; and (iii) permit correlation of expected level of response of a compound in the NMR experiment, based on relative responses of the IS and solute in the GC result. The recovery rate of caffeine from multiple injections of sample (1×, 2×, 5× and 10×) was 69.6 ± 1.3%, which correlated well (R(2) = 0.999) with the number of injections of compound. The (1)H-NMR spectrum was sufficient to enable structural characterisation of the reference caffeine compound, and was achieved with recovery of amounts of ≤10 µg from a single aliquot. Less than 400 µg of collected caffeine (40 replicate injections) was sufficient for structural characterisation by (13)C-NMR spectral analysis. The method allows development of approaches to separate unknown compounds in complex samples, and to separately use MS and NMR for their characterisation.

Novel hybrid comprehensive 2D-multidimensional gas chromatography for precise, high-resolution characterization of multicomponent samples.

A novel hybrid (sequential) comprehensive 2D-multidimensional gas chromatography (GC × GC-MDGC) method for complex sample manipulation and separation is described. It incorporates a separation step that approximates slow modulation GC × GC, prior to microfluidic Deans switch heart-cutting of a targeted region(s) into a third analytical column. It allows discrete single or multiple components, bands or regions, or any combination of these to be selected and excised from within the 2D GC × GC separation space. The excised individual components can be further collected and studied. Alternatively, any unresolved or poorly resolved components, or regions that require further separation, can be transferred to an additional (third) column separation step. The method is applied to separation and quantitative analysis of oxygenates in a thermally stressed algae-derived biofuel oil by using flame ionization detection (FID), without any prefractionation. This permits oxygenated compounds to be fully resolved from saturated (matrix) compounds, which are completely excluded from the third column. Improved separation was obtained between target classes (aldehydes, 2-ketones, alcohols, acids). Excellent calibration linearity, and retention time and peak area reproducibility were obtained for 14 oxy-compounds present in trace amount in the complex biofuel matrix. Accuracy of microfluidic transfer to the third column, and the profile reproducibility before and after heart-cut operations, was demonstrated by extracting single components from a complex coffee volatile sample.

Multidimensional gas chromatography of oxidative degradation products in algae-derived fuel oil samples using narrow heartcuts and rapid cycle times.

To characterize a fuel's thermal and storage stability an understanding of the process of oxidation and oxidation pathways is essential. Oxidation pathways commence with hydroperoxides which quickly decompose to form a range of alcohols, acids and other oxygen-containing species. In the presence of significant levels of hydrocarbon-based matrix, analysis of these heteroatomic species is difficult. Applying multidimensional gas chromatography with very narrow heart-cut windows (0.20 min) minimizes the number of compounds transferred to the second dimension (2D) column during each heart-cut. Successive heart-cuts every 2.00 min are taken throughout the analytical run, since each heart-cut has a maximum retention on 2D of <2.00 min on the fast elution 2D column. Subsequent analyses involve incrementing or offsetting the heart-cut windows by 0.20 min, so after 10 analyses, a complete coverage of the sample components can be obtained. On the polar 1D and non-polar 2D phase column arrangement, non-polar matrix compounds elute last on the 2D column, and this determines the largest (2t)R; i.e., (2t)R < P(M) to ensure retained components on 2D will not overlap with subsequent heart-cuts. Heartcutting is supported by cryotrapping at the start of the 2D column in order to provide significantly better resolution. Good quality MS library match data generally demonstrate the high resolution separation of oxygenates achieved. Whilst 1D GC-MS was unsuccessful in identifying any of the oxygen-containing compounds reported here, good correlation of MS data (with average MS library similarity data) for acids (903), alcohols (909), ketones (941) and aldehydes (938) in the sample is obtained. The method requires ten sequential runs, and this can be accomplished automatically once the events table is set up. However if fewer target compounds are to be transferred, a reduced number of sequential runs can be implemented.

Comprehensive two-dimensional gas chromatography applied to illicit drug analysis.

Multidimensional gas chromatography (MDGC), and especially its latest incarnation--comprehensive two-dimensional gas chromatography (GC × GC)--have proved advantageous over and above classic one-dimensional gas chromatography (1D GC) in many areas of analysis by offering improved peak capacity, often enhanced sensitivity and, especially in the case of GC × GC, the unique feature of 'structured' chromatograms. This article reviews recent advances in MDGC and GC × GC in drug analysis with special focus on ecstasy, heroin and cocaine profiling. Although 1D GC is still the method of choice for drug profiling in most laboratories because of its simplicity and instrument availability, GC × GC is a tempting proposition for this purpose because of its ability to generate a higher net information content. Effluent refocusing due to the modulation (compression) process, combined with the separation on two 'orthogonal' columns, results in more components being well resolved and therefore being analytically and statistically useful to the profile. The spread of the components in the two-dimensional plots is strongly dependent on the extent of retention 'orthogonality' (i.e. the extent to which the two phases possess different or independent retention mechanisms towards sample constituents) between the two columns. The benefits of 'information-driven' drug profiling, where more points of reference are usually required for sample differentiation, are discussed. In addition, several limitations in application of MDGC in drug profiling, including data acquisition rate, column temperature limit, column phase orthogonality and chiral separation, are considered and discussed. Although the review focuses on the articles published in the last decade, a brief chronological preview of the profiling methods used throughout the last three decades is given.

Headspace solid-phase microextraction combined with GC×GC-TOFMS for the analysis of volatile compounds of Coptis species rhizomes.

In this study, the investigation of the volatile compounds of dried rhizomes of Coptis chinensis Franch, C. deltoidea C. Y. Cheng et Hsiao, and C. teeta Wall was carried out to complete the chemical composition of these valuable natural products. Volatile profiles were established and compared after headspace solid-phase microextraction (HS-SPME) using a polydimethylsiloxane/divinylbenzene (PDMS/DVB, 65 µm) fibre coupled to comprehensive 2D gas chromatography time-of-flight mass spectrometry (GC×GC-TOFMS). Analyses were performed and compared on two column-phase combinations (non-polar/polar and polar/non-polar). The majority of the identified compounds eluted as well-separated (pure) components as a result of high-resolution capability of the GC×GC method, which significantly reduces co-elution. Therefore, this increases the likelihood that pure mass spectra can be obtained. More than 290 volatile and semi-volatile organic compounds were tentatively characterized by means of GC×GC in tandem with TOFMS detection. Improved result interpretations were obtained in terms of compound classification based on the organized structure of the peaks of structurally related compounds in the GC×GC contour plot. These compounds are distributed over the chemical groups of hydrocarbons, acids, alkenes, alkynes, aldehydes, ketones, alcohols, esters, furans, and terpenoids. Among all the chemical groups, terpenoids present the higher number of identified compounds (44), alkenes (41), and aldehydes and ketones (28). This study completed the volatile phytochemical analysis of the headspace composition of various Coptis species rhizomes, and should serve as a means to identify the difference between the rhizomes and may also be useful to confirm individual species based on their volatile chemical profile.

Chemical signature of ecstasy volatiles by comprehensive two-dimensional gas chromatography.

A method for ecstasy volatiles 'signature' analysis based on two-dimensional gas chromatography separation and time-of-flight mass spectrometry detection (GC×GC-TOFMS) is presented. Organic impurity volatiles were extracted by head space solid phase microextraction (HS-SPME). The final column phase choice of the four different column combinations tested was a low-polarity 5% phenyl polysilphenylene-siloxane coupled with a polyethylene glycol phase, which best displayed the complex impurity profile. Second dimension ((2)D) retention time reproducibility was found to be about 1% RSD, and area reproducibility of SPME sampling was just over 5% RSD for compounds with S/N ratio of about 100. High similarity of TOFMS spectra of impurities was obtained against commercial MS libraries. 16 components from the two-dimensional profiles were selected for comparison of the 24 ecstasy tablets, most of which proved to be benzodioxole derived compounds. All tablets were correctly classified in eight groups according to their post-tabletting characteristics, when appropriate data pre-treatment was applied. Principal component analysis revealed clustering of samples according to the country of origin. Samples from Macedonia were elevated in N-formyl-MDMA and N-acetyl-MDMA while samples from Australia were elevated in 3,4-methylenedioxypropane and 3,4-methylenedioxyacetophenone. Furthermore, three components were found to be unique for one of the source countries. The additional separation of components on the (2)D column, increased response due to modulation, high acquisition rate with full mass spectra using TOFMS detection, and MS deconvolution extend the possibility of detecting additional markers and route-specific components, especially of low abundant, polar components.

Evaluation of World Anti-Doping Agency criteria for anabolic agent analysis by using comprehensive two-dimensional gas chromatography-mass spectrometry.

This work presents the validation study of the comprehensive two-dimensional gas chromatography (GC x GC)-time-of-flight mass spectrometry method performance in the analysis of the key World Anti-Doping Agency (WADA) anabolic agents in doping control. The relative abundance ratio, retention time, identification and other method performance criteria have been tested in the GC x GC format to confirm that they comply with those set by WADA. Furthermore, tens of other components were identified with an average similarity of >920 (on the 0-999 scale), including 10 other endogenous sterols, and full mass spectra of 5,000+ compounds were retained. The testosterone/epitestosterone ratio was obtained from the same run. A new dimension in doping analysis has been implemented by addressing separation improvement. Instead of increasing the method sensitivity, which is accompanied by making the detector increasingly "blind" to the matrix (as represented by selected ion monitoring mode, high-resolution mass spectrometry (MS) and tandem MS), the method capabilities have been improved by adding a new "separation" dimension while retaining full mass spectral scan information. Apart from the requirement for the mass spectral domain that a minimum of three diagnostic ions with relative abundance of 5% or higher in the MS spectra, all other WADA criteria are satisfied by GC x GC operation. The minimum of three diagnostic ions arises from the need to add some degree of specificity to the acquired mass spectrometry data; however, under the proposed full MS scan method, the high MS similarity to the reference compounds offers more than the required three diagnostic ions for an unambiguous identification. This should be viewed as an extension of the present criteria to a full-scan MS method.

Comprehensive two-dimensional gas chromatography improves separation and identification of anabolic agents in doping control.

The application of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GCxGC-TOFMS) for the analysis of six anabolic agents (AAs) in doping control is investigated in this work. A non-polar-polar column configuration with 0.2microm film thickness (d(f)) second dimension ((2)D) column was employed, offering much better spread of the components on (2)D when compared to the alternative 0.1microm d(f)(2)D column. The proposed method was tested on the "key" AA that the World Anti-Doping Agency (WADA) had listed at the low ngmL(-1) levels (clenbuterol, 19-norandrosterone, epimethendiol, 17alpha-methyl-5alpha-androstane-3alpha,17beta-diol, 17alpha-methyl-5beta-androstane-3alpha,17beta-diol and 3'-OH-stanozolol). The compounds were spiked in a blank urine extract obtained by solid-phase extraction, hydrolysis and liquid-liquid extraction; prior to analysis they were converted to the corresponding trimethylsilyl (TMS) derivatives. The limit of detection (LOD) was below or equal to the minimum required performance limit (MRPL) of 2ngmL(-1) defined by WADA, and the correlation coefficient was in the range from 0.995 to 0.999. The method allows choosing an ion from the full mass spectra which shows the least interference from the matrix and/or the best sensitivity; this can only be done if full scan mass spectral data are available. The advantage of GCxGC over classical one-dimensional GC (1D GC), in terms of separation efficiency and sensitivity, is demonstrated on a positive urine control sample at a concentration of 5ngmL(-1). The obtained similarity to the in-house created TOFMS spectra library at this level of concentration was in the range from 822 to 932 (on the scale from 0 to 999). Since full mass spectral information are recorded, the method allows the retro-search of non-target compounds or new "designer steroids", which cannot be detected with established GC-MS methods that use selected ion monitoring (SIM) mode.

Peak modeling approach to accurate assignment of first-dimension retention times in comprehensive two-dimensional chromatography.

Modeling of first-dimension retention of peaks based on modulation phase and period allows reliable prediction of the modulated peak distributions generated in the comprehensive two-dimensional chromatography experiment. By application of the inverse process, it is also possible to use the profile of the modulated peaks (their heights or areas) to predict the shape and parameters of the original input chromatographic band (retention time, standard deviation, area) for the primary column dimension. This allows an accurate derivation of the first-dimension retention time (RSD 0.02%) which is equal to that for the non-modulated experiment, rather than relying upon the retention time of the major modulated peak generated by the modulation process (RSD 0.16%). The latter metric can produce a retention time that differs by at least the modulation period employed in the experiment, which displays a discontinuity in the retention time vs modulation phase plot at the point of the 180 degrees out-of-phase modulation. In contrast, the new procedure proposed here gives a result that is essentially independent of modulation phase and period. This permits an accurate value to be assigned to the first-dimension retention. The proposed metric accounts for the time on the second-dimension, the phase of the distribution, and the hold-up time that the sampled solute is retained in the modulating interface. The approach may also be based on the largest three modulated peaks, rather than all modulated peaks. This simplifies the task of assigning the retention time with little loss of precision in band standard deviation or retention time, provided that these peaks are not all overloaded in the first or second dimension.

Accelerating analysis for metabolomics, drugs and their metabolites in biological samples using multidimensional gas chromatography.

Gas chromatography (GC) with mass spectrometry (MS) is one of the great enabling analytical tools available to the chemical and biochemical analyst for the measurement of volatile and semi-volatile compounds. From the analysis result, it is possible to assess progress in chemical reactions, to monitor environmental pollutants in a wide range of soil, water or air samples, to determine if an athlete or horse trainer has contravened doping laws, or if crude oil has migrated through subsurface rock to a reservoir. Each of these scenarios and samples has an associated implementation method for GC-MS. However, few samples and the associated interpretation of data is as complex or important as biochemical sample analysis for trace drugs or metabolites. Improving the analysis in both the GC and MS domains is a continual search for better separation, selectivity and sensitivity. Multidimensional methods are playing important roles in providing quality data to address the needs of analysts.

Application of comprehensive two-dimensional gas chromatography to sterols analysis.

The applicability of comprehensive two-dimensional gas chromatography (GCxGC) for sterol analysis was investigated by separation and identification of endogenous sterols in standards, and spiked in human urine. The modulation temperature was optimized to achieve the best separation and signal enhancement. The separation pattern of trimethylsilyl (TMS) derivatives of sterols was compared on two complementary column sets. Whilst the BPX5/BPX50 column set offers better overall separation, BPX50/BPX5 provides better peak shape and sensitivity. Comparison of the identification power of GCxGC-TOFMS against both the NIST05 MS library and a laboratory created (in-house) TOFMS library was carried out on a free sterols extract of urine, derivatised and spiked at the World Anti-Doping Agency (WADA) limit of 2 ng mL(-1). The average match quality for 19 analysed sterols on the BPX50/BPX5 column set was 950/1000 when searched against the in-house library; only four were identified against the NIST05 library, at a match threshold of 800. The match quality of GCxGC-TOFMS spectra was superior to that for analysis using 1D GC-TOFMS for sterols spiked in urine at 10 ng mL(-1). An r(2)>0.997 was obtained for the concentration range between 0.25 ng mL(-1) and 10 ng mL(-1) for three selected sterols. The lowest limit of detection (LOD) was obtained for estrone (0.1 ng mL(-1)) and the highest LOD was for 5alpha-androstan-3alpha,11beta-diol-17-one, epitestosterone and cholesteryl butyrate (1 ng mL(-1)), using a match threshold of at least 800 and signal-to-noise ratio of at least 10. TOFMS coupled to GCxGC enabled satisfactory identification of sterols in urine at their LOD. A minimum acceptable match (MAM) criterion for urinary sterols using 2D retention times and TOF mass spectra is introduced. This study shows that GCxGC-TOFMS yields high specificity for steroids derived from urine, with detection limits appropriate for use in doping control.

Rapid and simple method for direct determination of several amphetamines in seized tablets by GC--FID.

A simple and rapid method for direct simultaneous determination of amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxy-N-ethylamphetamine (MDEA) and N-methyl-1-(3,4-methylenedioxyphenyl)-2-butanamine (MBDB) in seized tablets was developed using gas chromatography with flame ionization detection. Separation of all six underivatized amphetamines, including diphenylamine as internal standard, was performed in about 6 min, using SPB-50 capillary column. Amphetamine and methamphetamine eluted with negligible tailing while the other amphetamines had highly symmetrical peaks. Sensitivity per component on-column was in the nanogram range, and reproducibility from 2.6 to 6.6% at low concentration (2.4 microg/mL) and from 1.2 to 2.6% at high (70 microg/mL) concentration. The method has a wide linear range, from Limit of detection (LOD) to almost 200 microg/mL, thus allowing analysis of different samples across a wide range of possible concentrations of amphetamines. This simple, fast and precise method using gas chromatography--flame ionization detector (GC--FID), in conjunction with other methods (TLC, IR, HPLC), can be used for identification of amphetamines and direct determination in seized tablets, especially in laboratories with heavy workload.