Reaction Dynamics of C(NH2)3SnI3 Formation from Vacuum-Deposited C(NH2)3I and SnI2 Bilayer Thin Films Investigated by In Situ Infrared Multiple-Angle Incidence-Resolved Spectroscopy.

Understanding the formation process of organic-inorganic halide perovskite (OIHP) thin films is important for the fabrication of high-quality thin films, which, in turn, are crucial for achieving high-performance devices. To address this challenge, we developed an in situ system of infrared multiple-angle incidence-resolved spectroscopy (IR-MAIRS) combined with a vacuum deposition system. "Orientation-free" isotropic spectra constructed from IR-MAIRS spectra enable us to perform quantitative analysis of the formation process of C(NH2)3SnI3 (GASnI3) thin films from unreacted C(NH2)3I (guanidine hydroiodide (GAI))/SnI2 bilayer structures predeposited in a vacuum. The analysis of the dependence of the GASnI3 formation rate on the reaction temperature using the Avrami model has revealed that a diffusion-controlled reaction process of GAI and SnI2 governs the formation kinetics. The present study points to the usefulness of in situ IR-MAIRS analysis in understanding the growth mechanisms of vacuum-deposited OIHP thin films and hence the potential to accelerate the development of vacuum processes for the fabrication of high-quality OIHP thin films.

Stability of silicon-tin alloyed nanocrystals with high tin concentration synthesized by femtosecond laser plasma in liquid media.

Nanocrystals have a great potential for future materials with tunable bandgap, due to their optical properties that are related with the material used, their sizes and their surface termination. Here, we concentrate on the silicon-tin alloy for photovoltaic applications due to their bandgap, lower than bulk Si, and also the possibility to activate direct band to band transition for high tin concentration. We synthesized silicon-tin alloy nanocrystals (SiSn-NCs) with diameter of about 2-3 nm by confined plasma technique employing a femtosecond laser irradiation on amorphous silicon-tin substrate submerged in liquid media. The tin concentration is estimated to be [Formula: see text], being the highest Sn concentration for SiSn-NCs reported so far. Our SiSn-NCs have a well-defined zinc-blend structure and, contrary to pure tin NCs, also an excellent thermal stability comparable to highly stable silicon NCs. We demonstrate by means of high resolution synchrotron XRD analysis (SPring 8) that the SiSn-NCs remain stable from room temperature up to [Formula: see text] with a relatively small expansion of the crystal lattice. The high thermal stability observed experimentally is rationalized by means of first-principle calculations.

In Situ Grown Nanocrystalline Si Recombination Junction Layers for Efficient Perovskite-Si Monolithic Tandem Solar Cells: Toward a Simpler Multijunction Architecture.

The perovskite-Si tandem is an attractive avenue to attain greater power conversion efficiency (PCE) than their respective single-junction solar cells. However, such devices generally employ complex stacks with numerous deposition steps, which are rather unattractive from an industrial perspective. Here, we develop a simplified tandem architecture consisting of a perovskite n-i-p stack on a silicon heterojunction structure without applying the typically used indium-tin-oxide (ITO) recombination junction (RJ) layer between the top and bottom cells. It is demonstrated that an n-type hydrogenated nanocrystalline silicon (nc-Si:H) grown in situ on an amorphous silicon hole contact layer of the bottom cell acts as an efficient RJ layer, leading to a high open-circuit voltage (VOC) of >1.8 V and a PCE of 21.4% without optimizing the optical design. Compared to the tandem cell with an ITO RJ layer, the nc-Si:H RJ layer not only improves light management but also achieves a higher VOC due to superior contact properties with an overlying SnO2 electron transport layer of the perovskite top cell. Omitting the costly material and its deposition step offers the opportunity toward realizing industrially feasible high-efficiency tandem solar cells.

Insights into Microscopic Crystal Growth Dynamics of CH3NH3PbI3 under a Laser Deposition Process Revealed by In Situ X-ray Diffraction.

The process dynamics for the vacuum deposition of methylammonium lead iodide (MAPbI3) perovskite was analyzed by in situ X-ray diffraction using synchrotron radiation. MAPbI3 was fabricated by alternatingly supplying PbI2 and methylammonium iodide via a laser deposition system installed at the synchrotron beamline BL46XU at SPring-8, and in situ crystallization analysis was conducted. Microscopic insights into the crystallization were obtained, including observation of Laue oscillation during the PbI2 growth and octahedral unit (PbI6) rotation during the transformation into perovskite. On the basis of this analysis, conditions that favor the construction of atomically flat MAPbI3 perovskite films were deduced.

Tuning Methylammonium Iodide Amount in Organolead Halide Perovskite Materials by Post-Treatment for High-Efficiency Solar Cells.

In this study, the composition of organic-inorganic perovskite materials is tuned by methylammonium iodide (MAI) post-treatment for high photovoltaic performance. By spin-coating MAI solutions of different concentrations, the amounts of PbI2 and MAI in perovskite layers are tuned. In perovskites, the removal of PbI2 through a reaction with MAI decreases the hysteresis in photocurrent density-voltage curves. Further, by treating perovskites with a high-concentration MAI solution, the excess MAI is incorporated into the perovskites. These perovskites with excess MAI show better power conversion efficiencies (of up to 20.7%) than perovskites with excess PbI2 because of the decrease in trap density. Since the present post-treatment can control perovskite composition without affecting the morphology and crystallinity of the perovskite crystals, this technique would be a useful tool to improve the photovoltaic performance of perovskite solar cells.

Organic Photovoltaic Devices Based on Oriented n-Type Molecular Films Deposited on Oriented Polythiophene Films.

The molecular orientation of π-conjugated molecules has been reported to significantly affect the performance of organic photovoltaic devices (OPVs) based on molecular films. Hence, the control of molecular orientation is a key issue toward the improvement of OPV performance. In this research, oriented thin films of an n-type molecule, 3,4,9,10-Perylenetetracarboxylic Bisbenzimida-zole (PTCBI), were formed by deposition on in-plane oriented polythiophene (PT) films. Orientation of the PTCBI films was evaluated by polarized UV-vis spectroscopy and 2D-Grazing incidence X-ray diffraction. Results indicated that PTCBI molecules on PT film exhibit nearly edge-on and in-plane orientation (with molecular long axis along the substrate), whereas PTCBI molecules without PT film exhibit neither. OPVs composed of PTCBI molecular film with and without PT were fabricated and evaluated for correlation of orientation with performance. The OPVs composed of PTCBI film with PT showed higher power conversion efficiency (PCE) than that of film without PT. The experiment indicated that in-plane orientation of PTCBI molecules absorbs incident light more efficiently, leading to increase in PCE.

Constructing Nanostructured Donor/Acceptor Bulk Heterojunctions via Interfacial Templates for Efficient Organic Photovoltaics.

We demonstrate that a poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)/diindenoperylene (PEDOT:PSS/DIP) interfacial bilayer could serve as a structural template to enable the morphological control of bulk heterojunctions (BHJs) by co-evaporation of tetraphenyldibenzoperiflanthene:fullerene (DBP:C60), which greatly improves the device performances. Especially, we show that isolated crystalline domains of C60 can be well-controlled at the nanoscale during the co-evaporation. Photoluminescence spectra indicate the realization of DIP/DBP cascade energy architecture, which significantly facilitates both the energy transfer and photocurrent generation. In addition, with bias-dependent external quantum efficiency analysis, we reveal that such a cascade energy device architecture greatly suppresses the energy recombination in both carrier and exciton transfer, resulting in a high open-circuit voltage and a high fill factor. By carefully optimizing the interfacial and BHJ layers, we achieved a high-performance organic photovoltaic cell with a power conversion efficiency of 5.0 ± 0.3%.

Adjustment of Conduction Band Edge of Compact TiO2 Layer in Perovskite Solar Cells Through TiCl4 Treatment.

Perovskite solar cells (PSCs) without a mesoporous TiO2 layer, that is, planar-type PSCs exhibit poorer cell performance as compared to PSCs with a porous TiO2 layer, owing to inefficient electron transfer from the perovskite layer to the compact TiO2 layer in the former case. The matching of the conduction band levels of perovskite and the compact TiO2 layer is thus essential for enhancing PSC performance. In this study, we demonstrate the shifting of the conduction band edge (CBE) of the compact TiO2 layer through a TiCl4 treatment, with the aim of improving PSC performance. The CBE of the compact TiO2 layer was shifted to a higher level through the TiCl4 treatment and then shifted in the opposite direction, that is, to a lower level, through a subsequent heat treatment. These shifts in the CBE were reflected in the PSC performance. The TiCl4-treated PSC showed an increase in the open-circuit voltage of more than 150 mV, as well as a decrease of 100 mV after being heated at 450 °C. On the other hand, the short-circuit current decreased after the treatment but increased after heating at temperatures higher than 300 °C. The treated PSC subjected to subsequent heating at 300 °C exhibited the best performance, with the power conversion efficiency of the PSC being 17% under optimized conditions.

Highly Controlled Codeposition Rate of Organolead Halide Perovskite by Laser Evaporation Method.

Organolead-halide perovskites can be promising materials for next-generation solar cells because of its high power conversion efficiency. The method of precise fabrication is required because both solution-process and vacuum-process fabrication of the perovskite have problems of controllability and reproducibility. Vacuum deposition process was expected to achieve precise control; however, vaporization of amine compound significantly degrades the controllability of deposition rate. Here we achieved the reduction of the vaporization by implementing the laser evaporation system for the codeposition of perovskite. Locally irradiated continuous-wave lasers on the source materials realized the reduced vaporization of CH3NH3I. The deposition rate was stabilized for several hours by adjusting the duty ratio of modulated laser based on proportional-integral control. Organic-photovoltaic-type perovskite solar cells were fabricated by codeposition of PbI2 and CH3NH3I. A power-conversion efficiency of 16.0% with reduced hysteresis was achieved.

Crystallization Dynamics of Organolead Halide Perovskite by Real-Time X-ray Diffraction.

We analyzed the crystallization process of the CH3NH3PbI3 perovskite by observing real-time X-ray diffraction immediately after combining a PbI2 thin film with a CH3NH3I solution. A detailed analysis of the transformation kinetics demonstrated the fractal diffusion of the CH3NH3I solution into the PbI2 film. Moreover, the perovskite crystal was found to be initially oriented based on the PbI2 crystal orientation but to gradually transition to a random orientation. The fluctuating characteristics of the crystallization process of perovskites, such as fractal penetration and orientational transformation, should be controlled to allow the fabrication of high-quality perovskite crystals. The characteristic reaction dynamics observed in this study should assist in establishing reproducible fabrication processes for perovskite solar cells.

Understanding device-structure-induced variations in open-circuit voltage for organic photovoltaics.

We investigate the structural influences on the device performance, especially on open-circuit voltage (V(OC)) in squaraine (SQ)/fullerene (C60) bilayer cells. Simply changing the SQ thickness could lead to 40% variation in V(OC) from 0.62 to 0.86 V. The ionization potential (IP) of SQ films and recombination at the anode surface as well as donor/acceptor (D/A) interface sensitively vary with film thicknesses, which account for the shifts in V(OC). The anode recombination can be effectively suppressed by preventing direct contact between C60 and the anode with a buffer layer, delivering an elevated V(OC). Through polarized infrared-multiple-angle incidence resolution spectroscopy measurement, the molecular structure of SQ films is found to gradually evolve from lying-down on indium-tin oxide substrates with noncentrosymmetric orientation at low thicknesses to random structure at high thicknesses. The different molecular orientation may yield different strengths of electronic coupling, which affects the charge-carrier recombination and thus V(OC). Moreover, the oriented SQ films would spontaneously compose aligned dipole moments at the D/A interface because of the strong dipolar effects in SQ molecules identified by density functional theory calculations, whereas no aligned interfacial dipole moment exists in the random structure. The resulting interfacial dipole moments would form an electric field at the D/A interface, leading to variations in the IP and thus impacting V(OC). Our findings demonstrate that V(OC) in organic photovoltaic cells is critically associated with the molecular orientation that affects the charge-carrier recombination and interfacial dipole alignment, which should be seriously taken into consideration for the design of organic molecules and optimization of the cell efficiency.

Templating effects in molecular growth of blended films for efficient small-molecule photovoltaics.

A strategy to control the molecular growth of coevaporated zinc phthalocyanine (ZnPc) and fullerene (C60) blended films for efficient organic photovoltaic (OPV) cells was demonstrated. Introduction of a 2,5-bis(4-biphenylyl)-bithiophene (BP2T) film or a ZnPc film on BP2T as nanostructured templates not only results in phase-separated domains in blended films with clear interpenetrating networks but also improves the crystallinity of ZnPc domains, both of which enhance photocurrent generation and charge carrier transport. Such morphology is strongly associated with the molecular growth of the templating layers. Roughness and adhesion of the templating layers are of great importance for the molecular growth of the blended films and in turn for cell characteristics. By carefully regulating the molecular growth of the blended films, the power conversion efficiency was improved by 125%, from 1.85 to 4.15% under 1 sun.

Glancing angle deposition of copper iodide nanocrystals for efficient organic photovoltaics.

We report a simple method to achieve efficient nanostructured organic photovoltaics via patterning copper iodide (CuI) nanocrystals on indium tin oxide by glancing angle deposition. The strong interfacial interaction between zinc phthalocyanine (ZnPc) and CuI leads to the formation of nanopillar arrays with lying-down molecular order, which greatly improve light absorption and surface roughness for exciton dissociation. Optimized ZnPc/C(60) bilayer cell has a power conversion efficiency of 4.0 ± 0.1%, which is about 3-fold larger than that of conventional planar cell.

Simple and scalable gel-based separation of metallic and semiconducting carbon nanotubes.

We report a rapid and scalable method for the separation of metallic and semiconducting single-wall carbon nanotubes (SWCNTs); the separation is performed by the selective adsorption of semiconducting SWCNTs on agarose gel. The most effective separation was realized by a simple procedure in which a piece of gel containing SWCNTs and sodium dodecyl sulfate was frozen, thawed, and squeezed. This process affords a solution containing 70% pure metallic SWCNTs and leaves a gel containing 95% pure semiconducting SWCNTs. Field-effect transistors constructed from the separated semiconducting SWCNTs have been demonstrated to function without any electrical breakdown.

Anisotropic polymerization of a long-chain diacetylene derivative Langmuir-Blodgett film on a step-bunched SiO2/Si surface.

Alternating facet/terrace nanostructures were fabricated on a SiO2 surface by step-bunching and thermal oxidation of a vicinal Si(111) substrate, and their influence upon the polymerization direction of a long-chain diacetylene derivative monolayer film was investigated by angle-dependent polarized near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was found that the peak intensity of the C 1s-pi transition was stronger when the electric vector plane of the incident X-ray was parallel to the direction of the periodic facet/terrace structures rather than perpendicular to them. On the contrary, a polymer film fabricated on a flat SiO2 surface showed no in-plane anisotropy of the peak intensity. These results indicate that the diacetylene groups in the diacetylene derivative monolayer are preferentially photopolymerized in the direction not across but along the periodic one-dimensional structures on the step-bunched and thermally oxidized SiO2/Si(111) surface.