Polyhydroxyalkanoate Copolymer Production by Recombinant Ralstonia eutropha Strain 1F2 from Fructose or Carbon Dioxide as Sole Carbon Source.

Ralstonia eutropha strain H16 is a chemoautotrophic bacterium that oxidizes hydrogen and accumulates poly[(R)-3-hydroxybutyrate] [P(3HB)], a prominent polyhydroxyalkanoate (PHA), within its cell. R. eutropha utilizes fructose or CO2 as its sole carbon source for this process. A PHA-negative mutant of strain H16, known as R. eutropha strain PHB-4, cannot produce PHA. Strain 1F2, derived from strain PHB-4, is a leucine analog-resistant mutant. Remarkably, the recombinant 1F2 strain exhibits the capacity to synthesize 3HB-based PHA copolymers containing 3-hydroxyvalerate (3HV) and 3-hydroxy-4-methyvalerate (3H4MV) comonomer units from fructose or CO2. This ability is conferred by the expression of a broad substrate-specific PHA synthase and tolerance to feedback inhibition of branched amino acids. However, the total amount of comonomer units incorporated into PHA was up to around 5 mol%. In this study, strain 1F2 underwent genetic engineering to augment the comonomer supply incorporated into PHA. This enhancement involved several modifications, including the additional expression of the broad substrate-specific 3-ketothiolase gene (bktB), the heterologous expression of the 2-ketoacid decarboxylase gene (kivd), and the phenylacetaldehyde dehydrogenase gene (padA). Furthermore, the genome of strain 1F2 was altered through the deletion of the 3-hydroxyacyl-CoA dehydrogenase gene (hbdH). The introduction of bktB-kivd-padA resulted in increased 3HV incorporation, reaching 13.9 mol% from fructose and 6.4 mol% from CO2. Additionally, the hbdH deletion resulted in the production of PHA copolymers containing (S)-3-hydroxy-2-methylpropionate (3H2MP). Interestingly, hbdH deletion increased the weight-average molecular weight of the PHA to over 3.0 × 106 on fructose. Thus, it demonstrates the positive effects of hbdH deletion on the copolymer composition and molecular weight of PHA.

Tacticity Characterization of Biosynthesized Polyhydroxyalkanoates Containing (S)- and (R)-3-Hydroxy-2-Methylpropionate Units.

Polyhydroxyalkanoates (PHAs), aliphatic polyesters synthesized by microorganisms, have gained considerable attention as biodegradable plastics. Recently, α-carbon-methylated PHAs have been shown to exhibit several interesting properties that differ from those of conventional PHAs, such as their crystallization behavior and material properties. This study investigated α-carbon methylated (S)- and (R)-3-hydroxy-2-methylpropionate (3H2MP) as new repeating units. 3H2MP units were homopolymerized or copolymerized with (R)-3-hydroxybutyrate (3HB) by manipulating the culture conditions of recombinant Escherichia coli LSBJ. Consequently, PHAs with 3H2MP units ranging from 5 to 100 mol % were synthesized by external addition of (R)- and (S)-enantiomers or the racemic form of 3H2MPNa. The (S)-3H2MP precursor supplemented into the culture medium was almost directly polymerized into PHA while maintaining its chirality. Therefore, a highly isotactic P(3H2MP) (R:S = 1:99) was synthesized, which displayed a melting temperature of 114-119 °C and a relatively high enthalpy of fusion (68 J/g). In contrast, in cultures supplemented with (R)-3H2MP, the precursor was racemized and polymerized into PHA, resulting in the synthesis of the amorphous polymer atactic P(3H2MP) (R:S = 40:60). However, racemization was not observed at a low concentration of the (R)-3H2MP precursor, thereby synthesizing P(3HB-co-8 mol % 3H2MP) with 100% (R)-3H2MP units. The thermogravimetric analysis revealed that the thermal degradation temperatures at 5% weight loss of P(3H2MP)s occurred at approximately 313 °C, independent of tacticity, which is substantially higher than that of P(3HB) (257 °C). This study demonstrates a new concept for controlling the physical properties of biosynthesized PHA by manipulating the polymers' tacticity using 3H2MP units.

Development of a Hypersensitivity Evaluation Method for Cultured Sensory Neurons Using Electrical Activity Recording.

Investigation of hypersensitivity caused by peripheral sensitization progression is important for developing novel pain treatments. Existing methods cannot record plastic changes in neuronal activity because they occur over a few days. We aimed to establish an efficient method to evaluate neuronal activity alterations caused by peripheral sensitization on high-density microelectrode arrays (HD-MEAs) which can record neuronal activity for a long time. Rat dorsal root ganglion (DRG) neurons were dissected from rat embryos and cultured on HD-MEAs. DRG neurons were labeled with NeuO, live staining dye. Neurons were detected with the fluorescence signal and electrodes were selected with the fluorescence images. The number of DRG neurons, whose activity were recorded, detected based on fluorescence observation was five times greater than that based on neuronal activity. Analysis of changes in neuronal activity observed in pharmacological stimulation experiments suggested that substance P induced peripheral sensitization and enhanced capsaicin sensitivity. In addition, results of immunofluorescence staining suggested that peripheral sensitization occurred mostly in neurons that co-expressed transient receptor potential vanilloid 1 (TRPV1) and neurokinin 1 receptor (NK1R). In conclusion, we established an efficient method for assessing the effects of peripheral sensitization on DRG neurons cultured on HD-MEAs.

Isolation and characterization of polyhydroxyalkanoate-degrading bacteria in seawater at two different depths from Suruga Bay.

IMPORTANCE: Polyhydroxyalkanoate (PHA) is a highly biodegradable microbial polyester, even in marine environments. In this study, we incorporated an enrichment culture-like approach in the process of isolating marine PHA-degrading bacteria. The resulting 91 isolates were suggested to fall into five genera (Alloalcanivorax, Alteromonas, Arenicella, Microbacterium, and Pseudoalteromonas) based on 16S rRNA analysis, including two novel genera (Arenicella and Microbacterium) as marine PHA-degrading bacteria. Microbacterium schleiferi (DSM 20489) and Alteromonas macleodii (NBRC 102226), the type strains closest to the several isolates, have an extracellular poly(3-hydroxybutyrate) [P(3HB)] depolymerase homolog that does not fit a marine-type domain composition. However, A. macleodii exhibited no PHA degradation ability, unlike M. schleiferi. This result demonstrates that the isolated Alteromonas spp. are different species from A. macleodii. P(3HB) depolymerase homologs in the genus Alteromonas should be scrutinized in the future, particularly about which ones work as the depolymerase.

Exploring Class I polyhydroxyalkanoate synthases with broad substrate specificity for polymerization of structurally diverse monomer units.

Polyhydroxyalkanoate (PHA) synthases (PhaCs) are key enzymes in PHA polymerization. PhaCs with broad substrate specificity are attractive for synthesizing structurally diverse PHAs. In the PHA family, 3-hydroxybutyrate (3HB)-based copolymers are industrially produced using Class I PhaCs and can be used as practical biodegradable thermoplastics. However, Class I PhaCs with broad substrate specificities are scarce, prompting our search for novel PhaCs. In this study, four new PhaCs from the bacteria Ferrimonas marina, Plesiomonas shigelloides, Shewanella pealeana, and Vibrio metschnikovii were selected via a homology search against the GenBank database, using the amino acid sequence of Aeromonas caviae PHA synthase (PhaCAc), a Class I enzyme with a wide range of substrate specificities, as a template. The four PhaCs were characterized in terms of their polymerization ability and substrate specificity, using Escherichia coli as a host for PHA production. All the new PhaCs were able to synthesize P(3HB) in E. coli with a high molecular weight, surpassing PhaCAc. The substrate specificity of PhaCs was evaluated by synthesizing 3HB-based copolymers with 3-hydroxyhexanoate, 3-hydroxy-4-methylvalerate, 3-hydroxy-2-methylbutyrate, and 3-hydroxypivalate monomers. Interestingly, PhaC from P. shigelloides (PhaCPs) exhibited relatively broad substrate specificity. PhaCPs was further engineered through site-directed mutagenesis, and the variant resulted in an enzyme with improved polymerization ability and substrate specificity.

Oxidation of methionine-derived 2-hydroxyalkanoate unit in biosynthesized polyhydroxyalkanoate copolymers.

In this study, 2-hydroxy-4-methylthiobutyrate (2H4MTB)-containing polyhydroxyalkanoate (PHA) copolymers were biosynthesized using methionine as the 2H4MTB precursor. 2H4MTB is a novel monomer unit that contains a sulfur atom in its side chain. The 2H4MTB-containing PHA was biosynthesized by functionalizing the leucine degradation and PHA synthesis pathways in recombinant Escherichia coli. The 2H4MTB fraction in the PHA copolymer was increased up to 30.6 mol% by increasing the methionine concentration in the medium. Using purified polymers containing 10.9 mol% 2H4MTB unit, the sulfide group of the 2H4MTB side chain was oxidized with hydrogen peroxide or peracetic acid, which resulted in the conversion of sulfide to sulfoxide and sulfone groups. The oxidized polymer was relatively hydrophilic, as revealed by water contact angle measurements, and swelled slightly when soaked in water. These results suggest that the 2H4MTB unit can be used as an oxidation site to impart hydrophilicity to the PHA copolymers.

Continuous Supply of Non-Combustible Gas Mixture for Safe Autotrophic Culture to Produce Polyhydroxyalkanoate by Hydrogen-Oxidizing Bacteria.

Polyhydroxyalkanoates (PHAs) are eco-friendly plastics that are thermoplastic and biodegradable in nature. The hydrogen-oxidizing bacterium Ralstonia eutropha can biosynthesize poly[(R)-3-hydroxybutyrate] [P(3HB)], the most common PHA, from carbon dioxide using hydrogen and oxygen as energy sources. In conventional autotrophic cultivation using R. eutropha, a gas mixture containing 75−80 vol% hydrogen is supplied; however, a gas mixture with such a high hydrogen content has a risk of explosion due to gas leakage. In this study, we aimed to develop an efficient cell culture system with a continuous supply of a non-combustible gas mixture (H2: O2: CO2: N2 = 3.8: 7.3: 13.0: 75.9) for safe autotrophic culture to produce P(3HB) by hydrogen-oxidizing bacteria, with a controlled hydrogen concentration under a lower explosive limit concentration. When the gas mixture was continuously supplied to the jar fermentor, the cell growth of R. eutropha H16 significantly improved compared to that in previous studies using flask cultures. Furthermore, an increased gas flow rate and agitation speed enhanced both cell growth and P(3HB) production. Nitrogen source deficiency promoted P(3HB) production, achieving up to 2.94 g/L P(3HB) and 89 wt% P(3HB) content in the cells after 144 h cultivation. R. eutropha NCIMB 11599, recombinant R. eutropha PHB-4, and Azohydromonas lata grew in a low-hydrogen-content gas mixture. R. eutropha H16 and recombinant R. eutropha PHB-4 expressing PHA synthase from Bacillus cereus YB-4 synthesized P(3HB) with a high weight-average molecular weight of 13.5−16.9 × 105. Thus, this autotrophic culture system is highly beneficial for PHA production from carbon dioxide using hydrogen-oxidizing bacteria as the risk of explosion is eliminated.

Characterization of an (R)-specific enoyl-CoA hydratase from Streptomyces sp. strain CFMR 7: A metabolic tool for enhancing the production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate).

Poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] [P(3HB-co-3HHx)] has a high potential to serve as a commercial bioplastic due to its biodegradability, thermoplastic and mechanical properties. The properties of this copolymer are greatly affected by the composition of 3HHx monomer. One of the most efficient ways to modulate the composition of 3HHx monomer in P(3HB-co-3HHx) is by manipulating the (R)-3HHx-CoA monomer supply. In this study, a new (R)-specific enoyl-CoA hydratase originating from a non-PHA producer, Streptomyces sp. strain CFMR 7 (PhaJSs), was characterized and found to be effective in supplying 3HHx monomer during in vivo production of P(3HB-co-3HHx) copolymer. The P(3HB-co-3HHx) copolymer produced from the Cupriavidus necator transformant that harbors phaJSs, PHB-4/pBBR1-CBP-M-CPF4JSs, showed enhanced 3HHx incorporation of up to 11 mol% without affecting the P(3HB-co-3HHx) production when palm oil was used as the carbon source. In addition, both kcat and kcat/Km of PhaJSs were higher toward the C6 than the shorter C4 substrates, underscoring the preference for 3-hydroxyhexanoyl-CoA. These results suggest that PhaJSs has a significant ability to supply 3HHx monomers for PHA biosynthesis via ß-oxidation and can be applied for metabolic engineering of robust PHA-producing strains.

Biosynthesis of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) From Glucose by Escherichia coli Through Butyryl-CoA Formation Driven by Ccr-Emd Combination.

Poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] [P(3HB-co-3HHx)] is a practical kind of bacterial polyhydroxyalkanoates (PHAs). A previous study has established an artificial pathway for the biosynthesis of P(3HB-co-3HHx) from structurally unrelated sugars in Ralstonia eutropha, in which crotonyl-CoA carboxylase/reductase (Ccr) and ethylmalonyl-CoA decarboxylase (Emd) are a key combination for generation of butyryl-CoA and the following chain elongation. This study focused on the installation of the artificial pathway into Escherichia coli. The recombinant strain of E. coli JM109 harboring 11 heterologous genes including Ccr and Emd produced P(3HB-co-3HHx) composed of 14 mol% 3HHx with 41 wt% of dry cellular weight from glucose. Further investigations revealed that the C6 monomer (R)-3HHx-CoA was not supplied by (R)-specific reduction of 3-oxohexanoyl-CoA but by (R)-specific hydration of 2-hexenoyl-CoA formed through reverse ß-oxidation after the elongation from C4 to C6. While contribution of the reverse ß-oxidation to the conversion of the C4 intermediates was very limited, crotonyl-CoA, a precursor of butyryl-CoA, was generated by dehydration of (R)-3HB-CoA. Several modifications previously reported for enhancement of bioproduction in E. coli were examined for the copolyester synthesis. Elimination of the global regulator Cra or PdhR as well as the block of acetate formation resulted in poor PHA synthesis. The strain lacking RNase G accumulated more PHA but with almost no 3HHx unit. Introduction of the phosphite oxidation system for regeneration of NADPH led to copolyester synthesis with the higher cellular content and higher 3HHx composition by two-stage cultivation with phosphite than those in the absence of phosphite.

Poly(3-mercapto-2-methylpropionate), a Novel α-Methylated Bio-Polythioester with Rubber-like Elasticity, and Its Copolymer with 3-hydroxybutyrate: Biosynthesis and Characterization.

A new polythioester (PTE), poly(3-mercapto-2-methylpropionate) [P(3M2MP)], and its copolymer with 3-hydroxybutyrate (3HB) were successfully biosynthesized from 3-mercapto-2-methylpropionic acid as a structurally-related precursor. This is the fourth PTE of biological origin and the first to be α-methylated. P(3M2MP) was biosynthesized using an engineered Escherichia coli LSBJ, which has a high molecular weight, amorphous structure, and elastomeric properties, reaching 2600% elongation at break. P(3HB-co-3M2MP) copolymers were synthesized by expressing 3HB-supplying enzymes. The copolymers were produced with high content in the cells and showed a high 3M2MP unit incorporation of up to 77.2 wt% and 54.8 mol%, respectively. As the 3M2MP fraction in the copolymer increased, the molecular weight decreased and the polymers became softer, more flexible, and less crystalline, with lower glass transition temperatures and higher elongations at break. The properties of this PTE were distinct from those of previously biosynthesized PTEs, indicating that the range of material properties can be further expanded by introducing α-methylated thioester monomers.

Optimization of Culture Conditions for Secretory Production of 3-Hydroxybutyrate Oligomers Using Recombinant Escherichia coli.

Poly(3-hydroxybutyrate) [P(3HB)] is the most representative polyhydroxyalkanoate (PHA), which is a storage polyester for prokaryotic cells. P(3HB)-producing recombinant Escherichia coli secretes diethylene glycol (DEG)-terminated 3HB oligomers (3HBO-DEG) through a PHA synthase-mediated chain transfer and alcoholysis reactions with externally added DEG. The purpose of this study was to optimize the culture conditions for the secretory production of 3HBO-DEG with jar fermenters. First, the effects of culture conditions, such as agitation speed, culture temperature, culture pH, and medium composition on 3HBO-DEG production, were investigated in a batch culture using 250-ml mini jar fermenters. Based on the best culture conditions, a fed-batch culture was conducted by feeding glucose to further increase the 3HBO-DEG titer. Consequently, the optimized culture conditions were reproduced using a 2-L jar fermenter. This study successfully demonstrates a high titer of 3HBO-DEG, up to 34.8 g/L, by optimizing the culture conditions, showing the feasibility of a new synthetic strategy for PHA-based materials by combining secretory oligomer production and subsequent chemical reaction.

Enhanced Production of (R)-3-Hydroxybutyrate Oligomers by Coexpression of Molecular Chaperones in Recombinant Escherichia coli Harboring a Polyhydroxyalkanoate Synthase Derived from Bacillus cereus YB-4.

The biodegradable polyester poly-(R)-3-hydroxybutyrate [P(3HB)] is synthesized by a polymerizing enzyme called polyhydroxyalkanoate (PHA) synthase and accumulates in a wide variety of bacterial cells. Recently, we demonstrated the secretory production of a (R)-3HB oligomer (3HBO), a low-molecular-weight P(3HB), by using recombinant Escherichia coli expressing PHA synthases. The 3HBO has potential value as an antibacterial substance and as a building block for various polymers. In this study, to construct an efficient 3HBO production system, the coexpression of molecular chaperones and a PHA synthase derived from Bacillus cereus YB-4 (PhaRCYB4) was examined. First, genes encoding enzymes related to 3HBO biosynthesis (phaRCYB4, phaA and phaB derived from Ralstonia eutropha H16) and two types of molecular chaperones (groEL, groES, and tig) were introduced into the E. coli strains BW25113 and BW25113ΔadhE. As a result, coexpression of the chaperones promoted the enzyme activity of PHA synthase (approximately 2-3-fold) and 3HBO production (approximately 2-fold). The expression assay of each chaperone and PHA synthase subunit (PhaRYB4 and PhaCYB4) indicated that the combination of the two chaperone systems (GroEL-GroES and TF) supported the folding of PhaRYB4 and PhaCYB4. These results suggest that the utilization of chaperone proteins is a valuable approach to enhance the formation of active PHA synthase and the productivity of 3HBO.

Development of Thin Vibration Sheets Using a Shape Memory Alloy Actuator for the Tactile Feedback of Myoelectric Prosthetic hands.

Because the current myoelectric prosthetic hand does not have a tactile function, the user must always check the condition of the prosthetic hand. Various studies on sensory feedback have been conducted to address this problem, but several devices used in them cannot be integrated with artificial limbs, and wearing the devices is a burden on the user. To solve this problem, we developed thin vibration stimulation sheets using shape memory alloy (SMA) actuators. We then conducted an experiment on the effect of the change in shape at the contact part between the sheet and the skin on perception and confirmed that it would be easier to perceive vibration when the skin was deformed in a wider range. In addition, we investigated the number of distinguishable stimulus intensity levels and identification of stimulus positions. According to the results, the stimulus presented by the developed vibration sheet could be identified in three stages without learning about the stimulus, and the stimulation position by the vibration sheet could be identified with the same or higher accuracy as that of the disk-type vibration motor used in the existing research, although the accuracy decreased when vibrations were presented simultaneously.

Microbial oversecretion of (R)-3-hydroxybutyrate oligomer with diethylene glycol terminal as a macromonomer for polyurethane synthesis.

Poly((R)-3-hydroxybutyrate) (P(3HB)) is a polyester that is synthesized and accumulated in many prokaryotic cells. Recently, a new culture method for the secretion of the intracellularly synthesized (R)-3-hydroxybutyrate oligomer (3HBO) from recombinant Escherichia coli cells was developed. In this study, we attempted to produce microbial 3HBO capped with a diethylene glycol terminal (3HBO-DEG) as a macromonomer for polymeric materials. First, we prepared recombinant E. coli strains harboring genes encoding various polyhydroxyalkanoate (PHA) synthases (PhaC, PhaEC or PhaRC) that can incorporate chain transfer (CT) agents such as DEG into the polymer's terminal and generate CT end-capped oligomers. To this end, each strain was cultivated under DEG supplemental conditions, and the synthesis of 3HBO-DEG was confirmed. As a result, the highest secretory production of 3HBO-DEG was observed for the PHA synthase derived from Bacillus cereus YB-4 (PhaRCYB4). To evaluate the usability of the secreted 3HBO-DEG as a macromonomer, 3HBO-DEG was purified from the culture medium and polymerized with 4,4'-diphenylmethane diisocyanate as a spacer compound. Characterization of the polymeric products revealed that 3HBO-based polyurethane was successfully obtained and was a flexible and transparent noncrystalline polymer, unlike P(3HB). These results suggested that microbial 3HBO-DEG is a promising platform building block for synthesizing polyurethane and various other polymers.

Autotrophic biosynthesis of polyhydroxyalkanoate by Ralstonia eutropha from non-combustible gas mixture with low hydrogen content.

OBJECTIVES: To autotrophically produce polyhydroxyalkanoate (PHA) by Ralstonia eutropha without the risk of gas explosion, the feasibility of using a non-combustible gas mixture with low hydrogen content was investigated. RESULTS: A non-combustible gas mixture (H2: O2: CO2: N2 = 3.6: 7.6: 12.3: 76.5) was used for a 144-hour flask cultivation of two R. eutropha strains. Initially, using strain H16, the production conditions for poly(3-hydroxybutyrate) [P(3HB)] were explored by examining nutrient deficiency. Of these, a nitrogen source-deficient culture medium yielded the highest polymer content of 70 wt% in cells. Next, to produce PHA copolymer, the recombinant strain 1F2 was cultured under the nitrogen source-deficient autotrophic condition. As a result, the accumulation of 3HB-based copolymer containing of 1.2 mol% 3-hydroxyvalerate unit and 1.2 mol% 3-hydroxy-4-methylvalerate unit was observed with 57 wt% of the cell content. CONCLUSIONS: The use of a non-combustible gas with low hydrogen content is beneficial for PHA production in eliminating the risk of explosion due to hydrogen leakage.

Microbial Secretion Platform for 3-Hydroxybutyrate Oligomer and Its End-Capped Forms Using Chain Transfer Reaction-Mediated Polyhydroxyalkanoate Synthases.

The biodegradable polyester 3-hydroxybutyrate (3HB) polymer [P(3HB)] is intracellularly synthesized and accumulated in recombinant Escherichia coli. In this study, native polyhydroxyalkanoate (PHA) synthases are used to attempt to microbially secrete 3HB homo-oligomers (3HBOs), which are widely distributed in nature as physiologically active substances. High secretory production is observed, especially for the two PHA synthases from Aeromonas caviae and Bacillus cereus YB4. Surprisingly, an ethyl ester at the carboxy terminus (ethyl ester form) of 3HBOs is identified for most of the PHA synthases tested. Next, 3HBOs with a functional carboxyl group (carboxyl form of 3HBO) are obtained by using the alcohol dehydrogenase gene (adhE)-deficient mutant strain, suggesting that the endogenous ethanol produced in E. coli acts as a chain transfer (CT) agent in the generation of 3HBOs. Furthermore, an in vitro polymerization assay reveals that CT agents such as ethanol and free 3HB are involved in the generation of ethyl ester and carboxyl form of 3HBO, respectively. The microbial platform established herein allows the secretion of 3HBOs with desirable end structures by supplementation with various CT agents. The obtained 3HBOs and their end-capped forms may be used as physiologically active substances and building blocks for polymeric materials.

NADPH supply for poly(3-hydroxybutyrate) synthesis concomitant with enzymatic oxidation of phosphite.

Acetoacetyl-CoA reductase (PhaB), involved in poly(3-hydroxybutyrate) [P(3HB)] biosynthesis, requires the coenzyme NADPH as a reducing agent. In this study, the effect of NADPH supply on P(3HB) production was investigated in vitro and in vivo using a phosphite dehydrogenase double mutant (PtxDEAAR), which catalyzes oxidation of phosphite to phosphate with the generation of NADH and NADPH. In an in vitro assay using purified enzymes, P(3HB) polymerization was observed only when phosphite and PtxDEAAR were present, confirming that NADPH was supplied to PhaB. In an in vivo assay using Escherichia coli as a production host for P(3HB), the presence of phosphite and PtxDEAAR did not influence the yield of P(3HB) under normal growth conditions. However, P(3HB) yield increased 3.2-fold in non-growing E. coli cells compared to the control, suggesting that PtxDEAAR-mediated NADPH generation is coupled with P(3HB) biosynthesis. This study confirmed the use of PtxDEAAR for supplying NADPH during P(3HB) synthesis in vitro and in vivo.

Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyalkanoates) by recombinant Escherichia coli from glucose.

The polyhydroxyalkanoate (PHA) copolymers consisting of short-chain-length (scl) and medium-chain-length (mcl) monomers have various properties ranging from stiff to flexible depending on the molar fraction of the monomer compositions. It has been reported that PhaG, which is first known as a (R)-3-hydroxyacyl-acyl carrier protein (ACP)-CoA transferase, actually functions as a 3-hydroxyacyl-ACP thioesterase, and the product of PP0763 gene from Pseudomonas putida KT2440 has a (R)-3-hydroxyacyl (3HA)-CoA ligase activity (Wang et al., Appl. Environ. Microbiol., 78, 519-527, 2012). In this study, we found a new (R)-3HA-CoA ligase (the product of PA3924 gene) from Pseudomonas aeruginosa PAO. The PA3924 gene was coexpressed with PHA synthase 1 gene (phaC1Ps) and phaGPs gene from Pseudomonas sp. 61-3, and ß-ketothiolase gene (phbARe) and acetoacetyl-CoA reductase gene (phbBRe) from Ralstonia eutropha in Escherichia coli LS5218 at 25°C. As a result, the copolymer containing 94.6 mol% 3-hydroxybutyrate (3HB) and 5.4 mol% mcl-3-hydroxyalkanoates (3HA) consisting of C8, C10, C12 and C14 was synthesized by recombinant E. coli LS5218 from glucose as the sole carbon source. The concentration of P(3HB-co-3HA) (scl-co-mcl-PHA) synthesized by the recombinant E. coli LS5218 harboring phaC1Ps, phaGPs, phbABRe and the PA3924 genes was approximately 7-fold higher than that of the recombinant LS5218 harboring phaC1Ps, phaGPs, phbABRe and the PP0763 genes. The number-average molecular weight of the P(3HB-co-5.4% 3HA) copolymer was 233 × 10(3), which was relatively high molecular weight. In addition, the physical and the mechanical properties of the copolymer were demonstrated to improve the brittleness of P(3HB) homopolymer.

Negative feedback loop of cholesterol regulation is impaired in the livers of patients with Alagille syndrome.

AIM: To characterize cholesterol regulation in the liver of patients with Alagille syndrome (AGS). METHODS: Serum total cholesterol (TC) and total bile acid (TBA) levels were measured in 23 AGS patients. The expressions of genes involved in cholesterol regulation, including low-density lipoprotein receptor (LDLR), scavenger receptor class B type I (SR-BI), 3-hydroxy-3-methylglutaryl coenzyme A reductase (HMGCR), cholesterol 7α-hydroxylase (CYP7A1), ATP-binding cassette transporter (ABC) A1, and ABCG1/5/8, were measured in liver tissues from five of these patients. Expression of regulators for these genes, including farnesoid X receptor/small heterodimer partner (SHP), liver X receptor α (LXRα) and mature Sterol regulatory element-binding protein 2 (SREBP2) was measured. The expression of mature SREBP2 protein was also examined. RESULTS: Serum TC and TBA levels were correlated in the AGS patients. Liver cholesterol was also increased compared with controls, and correlated with bile acid contents. LDLR, SR-BI, HMGCR, and ABCGs mRNA expression were upregulated, while CYP7A1 mRNA expression was downregulated in AGS livers. SHP and LXRα mRNA expression was also increased, but maturation of SREBP2 was not suppressed in the patients. CONCLUSIONS: The major upregulators of liver cholesterol might be increased in AGS patients, indicating an impaired negative feedback mechanism and accelerated liver cholesterol accumulation.