Fabrication of porous FePt microcapsules for immunosensing techniques.

Porous FePt microcapsules are fabricated for use in bead-based immunoassay technologies, that generally use magnetic spheres to immobilize biomolecules on their surface. The magnetic capsules can be used to carry assay reagents to reduce the time required to perform immunoassay processes, and microsize capsules are easier to manipulate magnetically than nanosize ones. Silica particles of approximately 2.5 µm diameter are used as templates and modified with poly(ethyleneimine) (PEI), which enables FePt nanoparticles to accumulate selectively on the template particles and an FePt shell to be formed by a polyol process. To increase the mechanical stability of the FePt nanoparticle assembly shell, a double-layered FePt nanoparticle assembly is fabricated by repeating the modification process of PEI and the synthesis process of FePt nanoparticles, resulting in the fabrication of magnetic capsules with a three-dimensional structure. We further investigate the ability of magnetic capsules to immobilize antibodies on their surface. Gold nanoparticles are used as linkers between the magnetic microcapsules and antibodies. The antibodies are successfully immobilized on the surface of the developed microsize FePt capsules.

Separation and Analysis of Adherent and Non-Adherent Cancer Cells Using a Single-Cell Microarray Chip.

A new single-cell microarray chip was designed and developed to separate and analyze single adherent and non-adherent cancer cells. The single-cell microarray chip is made of polystyrene with over 60,000 microchambers of 10 different size patterns (31-40 µm upper diameter, 11-20 µm lower diameter). A drop of suspension of adherent carcinoma (NCI-H1650) and non-adherent leukocyte (CCRF-CEM) cells was placed onto the chip, and single-cell occupancy of NCI-H1650 and CCRF-CEM was determined to be 79% and 84%, respectively. This was achieved by controlling the chip design and surface treatment. Analysis of protein expression in single NCI-H1650 and CCRF-CEM cells was performed on the single-cell microarray chip by multi-antibody staining. Additionally, with this system, we retrieved positive single cells from the microchambers by a micromanipulator. Thus, this system demonstrates the potential for easy and accurate separation and analysis of various types of single cells.

Repetitive Immunoassay with a Surface Acoustic Wave Device and a Highly Stable Protein Monolayer for On-Site Monitoring of Airborne Dust Mite Allergens.

This work describes a sensor to be incorporated into the on-site monitoring system of airborne house dust mite (HDM) allergens. A surface acoustic wave (SAW) device was combined with self-assembled monolayers of a highly stable antibody capture protein on the SAW surface that have high resistance to pH change. A sandwich assay was used to measure a HDM allergen, Der f 1 derived from Dermatophagoides farinae. Capture antibodies were cross-linked to a protein G based capture layer (ORLA85) on the sensor surface, thereby only Der f 1 and detection antibodies were regenerated by changing pH, resulting in fast repetition of the measurement. The sensor was characterized through 10 repetitive measurements of Der f 1, which demonstrated high reproducibility of the sensor with the coefficient of variation of 5.6%. The limit of detection (LOD) of the sensor was 6.1 ng·mL(-1), encompassing the standard (20 ng·mL(-1)) set by the World Health Organization. Negligible sensor outputs were observed for five different major allergens including other HDM allergens which tend to have cross-reactivity to Der f 1 and their mixtures with Der f 1. Finally, the sensor lifetime was evaluated by conducting three measurements per day, and the sensor output did not substantially change for 4 days. These characteristics make the SAW immunosensor a promising candidate for incorporation into on-site allergen monitoring systems.

Chemiluminescent imaging of transpired ethanol from the palm for evaluation of alcohol metabolism.

A 2-dimensional imaging system was constructed and applied in measurements of gaseous ethanol emissions from the human palm. This imaging system measures gaseous ethanol concentrations as intensities of chemiluminescence by luminol reaction induced by alcohol oxidase and luminol-hydrogen peroxide-horseradish peroxidase system. Conversions of ethanol distributions and concentrations to 2-dimensional chemiluminescence were conducted on an enzyme-immobilized mesh substrate in a dark box, which contained a luminol solution. In order to visualize ethanol emissions from human palm skin, we developed highly sensitive and selective imaging system for transpired gaseous ethanol at sub ppm-levels. Thus, a mixture of a high-purity luminol solution of luminol sodium salt HG solution instead of standard luminol solution and an enhancer of eosin Y solution was adapted to refine the chemiluminescent intensity of the imaging system, and improved the detection limit to 3 ppm gaseous ethanol. The highly sensitive imaging allows us to successfully visualize the emissions dynamics of transdermal gaseous ethanol. The intensity of each site on the palm shows the reflection of ethanol concentrations distributions corresponding to the amount of alcohol metabolized upon consumption. This imaging system is significant and useful for the assessment of ethanol measurement of the palmar skin.

Direct analysis of airborne mite allergen (Der f1) in the residential atmosphere by chemifluorescent immunoassay using bioaerosol sampler.

Dermatophagoides farinae allergen (Der f1) is one of the most important indoor allergens associated with allergic diseases in humans. Mite allergen Der f1 is usually associated with particles of high molecular weight; thus, Der f1 is generally present in settled dust. However, a small quantity of Der f1 can be aerosolized and become an airborne component. Until now, a reliable method of detecting airborne Der f1 has not been developed. The aim of this study was to develop a fiber-optic chemifluorescent immunoassay for the detection of airborne Der f1. In this method, the Der f1 concentration measured on the basis of the intensity of fluorescence amplified by an enzymatic reaction between the labeled enzyme by a detection antibody and a fluorescent substrate. The measured Der f1 concentration was in the range from 0.49 to 250 ng/ml and a similar range was found by enzyme-linked immunosorbent assay (ELISA). This method was proved to be highly sensitive to Der f1 compared with other airborne allergens. For the implementation of airborne allergen measurement in a residential environment, a bioaerosol sampler was constructed. The airborne allergen generated by a nebulizer was conveyed to a newly sampler we developed for collecting airborne Der f1. The sampler was composed of polymethyl methacrylate (PMMA) cells for gas/liquid phases and some porous membranes which were sandwiched in between the two phases. Der f1 in air was collected by the sampler and measured using the fiber-optic immunoassay system. The concentration of Der f1 in aerosolized standards was in the range from 0.125 to 2.0 mg/m(3) and the collection rate of the device was approximately 0.2%.

Fiber-Optic Fluoroimmunoassay System with a Flow-Through Cell for Rapid On-Site Determination of Escherichia coli O157:H7 by Monitoring Fluorescence Dynamics.

Dynamic fluoroimmunoassay with a flow-through system using optical fiber probes consisting of polystyrene was developed and applied to a quantitative detection of E. coli O157:H7. The system measures E. coli as fluorescence of sandwich-type immune complexes formed by capture antibodies immobilized on the surface of the probe, E. coli cells, and fluorescently labeled detection antibodies. Excitation was carried out using an evanescent wave from the probe. Resulting fluorescence recoupled into the probe was detected by a photodiode. The assay system was constructed with a flow cell which was available for sequential injection of experimental reagents. In vitro characterization was performed using the flow cell, and the calibration range of E. coli O157:H7 was from 10(3) to 10(7) cells/mL. The measurement for each sample was completed within 12 min. Furthermore, it was also possible to estimate the concentrations of E. coli O157:H7 by the increasing rate of fluorescence during binding reaction of detection antibodies to antigens. This minimized the time for measurement down to 6 min. The system is suitable for rapid and direct determination for microorganisms or bacteria in food, clinical, and environmental sources.

Fluorescence immunoassay using an optical fiber for determination of Dermatophagoides farinae (Der f1).

Immunoassay methods are generally used for measuring of allergenic substances. However, they need special facilities, skilled handling, and time-consuming procedure. In this work, a fiber-optic immunoassay system which could measure allergen by fluorescent intensities of immune complexes formed by allergens and fluorescently labeled antibodies was established. Immune complexes absorbed on the optical fiber probe surface, and excitation light was injected into the probe, then evanescent field is created in the proximity of the probe. The fluorophores were excited by the evanescent light, and fluorescence was detected by a photo diode. The target allergen detected by our system was Der f1 derived from Dermatophagoides farinae that is one of the house dust mite and major source of inhaled allergens. The fluorophore used labeling on detecting antibody was cyanine 5. The system enabled to detect and quantitatively determine of Der f1. The measurement range was from 0.24 to 250 ng/ml, and the result competes with ELISA. The measurement time was 16 min/sample. The immunoassay system was applied to measurement of Der f1 from actual dust samples. Calculated values of Der f1 showed good correlations between the fiber-optic fluoroimmunoassay and ELISA.

Soft contact lens biosensor for in situ monitoring of tear glucose as non-invasive blood sugar assessment.

A contact lens (CL) biosensor for in situ monitoring of tear glucose was fabricated and tested. Biocompatible 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer and polydimethyl siloxane (PDMS) were employed as the biosensor material. The biosensor consists of a flexible Pt working electrode and a Ag/AgCl reference/counter electrode, which were formed by micro-electro-mechanical systems (MEMS) technique. The electrode at the sensing region was modified with glucose oxidase (GOD). The CL biosensor showed a good relationship between the output current and glucose concentration in a range of 0.03-5.0mM, with a correlation coefficient of 0.999. The calibration range covered the reported tear glucose concentrations in normal and diabetic patients. Also, the CL biosensor was applied to a rabbit for the purpose of tear glucose monitoring. The basal tear glucose was estimated to 0.11 mM. Also, the change of tear glucose induced by the change of blood sugar level was assessed by the oral glucose tolerance test. As a result, tear glucose level increased with a delay of 10 min from blood sugar level. The result showed that the CL biosensor is expected to provide further detailed information about the relationship between dynamics of blood glucose and tear glucose.

A soft and flexible biosensor using a phospholipid polymer for continuous glucose monitoring.

A flexible biosensor using a phospholipid polymer to immobilization of glucose oxidase (GOD) was fabricated and tested. At first, an enzyme membrane formed by immobilizing GOD onto a porous polytetrafluoroethylene (PTFE) membrane using the phospholipid polymer (2-methacryloyloxyethyl phosphorylcholine (MPC) copolymerized with 2-ethylhexylmethacrylate (EHMA):PMEH) was evaluated. According to the result of amperometric measurement, average density of GOD to be immobilized was optimized to 38.9 units cm(-2). Temperature and pH dependences were also investigated. Then, a flexible glucose sensor was fabricated by immobilizing GOD onto a flexible hydrogen peroxide electrode using PMEH. The flexible glucose sensor showed a linear relationship between output currents and glucose concentration in 0.05-1.00 mmol L(-1), with a correlation coefficient of 0.999. The calibration range covered the normal tear glucose level of 0.14-0.23 mmol L(-1). This indicates that the flexible biosensor is considered to be useful for monitoring of glucose in tear fluids.

Tonometric biosensor with a differential pressure sensor for chemo-mechanical measurement of glucose.

A tonometric biosensor for glucose was constructed using a chemo-mechanical reaction unit and a differential pressure sensor. The reaction unit was fabricated by using both liquid and gas cells separated by an enzyme diaphragm membrane, in which glucose oxidase was immobilized onto the single (gas cell) side of the dialysis membrane. By applying glucose solution (0, 25.0, 50.0, 100, 150 and 200 mmol/l) into the liquid cell of the chemo-mechanical reaction unit, the pressure in the gas cell decreased continuously with a steady de-pressure slope because the oxygen consumption in the gas cell was induced by the glucose oxidase (GOD) enzyme reaction at the enzyme side of the porous diaphragm membrane. The steady de-pressure slope in the gas cell showed the linear relationship with the glucose concentration in the liquid cell between 25.0 and 200.0 mmol/l (correlation coefficient of 0.998). A substrate regeneration cycle coupling GOD with l-ascorbic acid (AsA: 0, 1.0, 3.0, 10.0 and 50.0 mmol/l; as reducing reagent system) was applied to the chemo-mechanical reaction unit in order to amplify the output signal of the tonometric biosensor. 3.0 mmol/l concentration of AsA could optimally amplify the sensor signal more than 2.5 times in comparison with that of non-AsA reagent.