Influence of the Number of Revision Surgeries and Nasal Symmetry After Final Rhinoplasty for Patients With Cleft Lip.

The effects of operative intervention on vertical nasal growth in patients with unilateral cleft lips (CLs) are well described. However, the factors influencing nasal symmetry have not been sufficiently evaluated. Therefore, this study aimed to study the factors that cause difficulties in obtaining nasal symmetry postoperatively in patients with CLs. We conducted a retrospective analysis using data from patients with CLs who underwent a series of treatments at Keio University Hospital from 1990 to 2000. We collected data on the patients' sex, cleft type, number and time of revision surgery, palatal fistula incidence, and history of the pharyngeal flap and orthognathic surgery. Nasal symmetry was analyzed as the symmetrical ratio after the final touch-up surgery, and multivariate analysis was conducted using binary logistic regression to determine the factors affecting nasal symmetry. This study included 89 patients with unilateral CL. Multivariate analysis revealed that complete cleft lip and palate ( P < 0.05, odds ratio = 4.37) and repeated revision surgery ( P < 0.05, odds ratio = 9.28) were significant predictors of the final nasal symmetry. Our study showed that cleft type and the number of revision surgeries were identified as important factors for obtaining nasal symmetry after final touch-up rhinoplasty. Revision surgery may be necessary to relieve patients' psychological stress due to nasal deformity, suggesting that this dilemma needs to be overcome.

The role of surgeon's learning on the outcomes of alveolar bone graft for cleft repair.

BACKGROUND AND PURPOSE: Teaching cleft repair in the operating room may not sufficiently prepare craniofacial residents to perform the procedure self-reliantly. This study aimed to assess the influence of surgeons' experience level on the operative time and graft survival ratio after alveolar bone grafts for cleft repair. SUBJECTS AND METHODS: This was a retrospective review of 100 consecutive alveolar bone graft patients treated for unilateral alveolar cleft by one craniofacial surgeon between 2012 and 2019. An alveolar bone graft from the iliac bone was performed using the lateral sliding flap. Sex, age, cleft width, cleft defect volume, and operative time were recorded, and the 1-year postoperative graft survival ratio was calculated. Multiple regression analysis was performed to identify factors that affect the operative time and survival ratio. RESULTS: Factors affecting the operative time were the experience level of the surgeon and the presence of a cleft palate. Factors affecting the graft survival ratio were the cleft defect volume and experience level of the surgeon. In cleft lip and alveolus, the survival ratio was constant, and the operative time stabilised after approximately 20 cases. In cleft lip and palate, more experience was required to master the technique, and the operative time and survival ratio were stabilised only after approximately 40 cases. CONCLUSION: Surgeons' experience level influenced the outcomes of alveolar bone grafting. Although surgical training is currently undergoing a paradigm shift from on-the-job training to simulation-based training, clinical experience is critical to be self-sufficient.

Symmetrical peripheral gangrene caused by septic shock.

We report three cases of symmetrical peripheral gangrene (SPG) caused by septic shock. Most of sepsis survivors with SPG require amputation of the affected extremities. To preserve the length of the thumb and fingers, we performed surgical amputation and used flaps to cover the amputated peripheral extremities.

Nasal tip surgery for cleft nose in Asians.

"Collapsed nasal tip," one of the most characteristic features of cleft lip nose, resembles the effect of pushing the nose tip with a finger and is especially noticeable among Asians. The authors examined a rhinoplasty technique for improving collapsed nasal tip. Using an intercartilaginous incision, the distal nasal framework, including the alar cartilages, and the caudal septum were widely exposed. A septal extension graft was fixed to the caudal septum, and the alar cartilages were precisely sutured to the extension graft using markings transferred to the extension graft. This procedure was applied to 15 Asian rhinoplasties, with all patients having substantial improvement in the shape of their nasal tip. Comparing those with and without a history of rhinoplasty, effecting a projection of the nasal tip was more difficult in patients with a history of previous rhinoplasties. The advantages of this technique include inconspicuous scarring and versatility in the modification of the nasal tip. Rhinoplasty during the growth period should be planned with consideration of future augmentation rhinoplasties.

Evaluation of bone volume after secondary bone grafting in unilateral alveolar cleft using computer-aided engineering.

The purpose of this study was to evaluate the initial defect and the outcome of bone grafts for unilateral alveolar cleft. To determine the absorption of the bone graft in patients with unilateral cleft, computer-aided engineering (CAE) with multi-detector row computed tomography (MDCT) was used. MDCT scans of 29 patients were taken immediately preoperatively and at 1 month and 6 months postoperatively. The patients underwent bone grafting between 8 and 14 years of age using iliac crest bone grafts. Three-dimensional models were created in each period, and the defect at the alveolar cleft and volume of the bone graft were determined in each patient using CAE. Cleft volume and success of alveolar bone grafting were significantly correlated (P < .01). Alveolar clefts with cleft palate required more bone volume than those without cleft palate (P < .01), but the resorption rate did not significantly differ between alveolar clefts with and without cleft palate (0.48 ± 0.14 and 0.49 ± 0.18, respectively; P = .93). In conclusion, three-dimensional reconstruction of bone grafts using CAE based on MDCT provides a valuable objective assessment of graft volume.

Effective scoring of scapha prevents helix irregularity in prominent ear correction - a biomechanical study.

BACKGROUND: As the antihelix is created in the operation for prominent ear, the helix often presents irregularities. This biomechanical study aims to elucidate effective techniques to prevent these irregularities. METHODS: Finite element models were produced simulating 10 prominent ears. The scaphas of the 10 models were thinned to simulate scoring or abrasion of the cartilage. The thinning was conducted in four fashions. In the first group, no thinning was conducted (Non-Scoring Models); in the second group, the upper half of the scapha was thinned (Upper-Scoring Models); in the third group, the lower half of the scapha was thinned (Lower-Scoring Models); in the fourth group, the whole scapha was thinned (Whole-Scoring Models). Mattress sutures were applied to create the antihelix to simulate Mustarde's in-suture technique. Thereafter, transformation of the helix's contour was evaluated. RESULTS: Irregularity developed on the upper region of the helix with Non-Scoring and Lower-Scoring Models; the degree of the upper-region's irregularity was reduced with Upper-Scoring Models and Whole-Scoring Models. Although the edge of the helix moved in the posterior-medial direction with other type models, it moved in the anterior direction with Whole-Scoring Models. CONCLUSION: Irregularity of the upper region of the helix can be prevented by performing scoring or abrasion of the upper part of the scapha. The prominence of the helix and width of the auricle are adjustable by varying the areas of the scapha receiving scoring or abrasion. These findings are useful in improving operative outcomes in the treatment of prominent ears.

Classification of congenital midline upper lip sinuses: a case report and review of the literature.

BACKGROUND: We recently encountered a case of a midline upper lip sinus, one of the rarest congenital lip sinuses. Several embryological hypotheses have been proposed regarding the etiology of this rare disease, but it remains obscure. METHODS: We reviewed all cases of upper lip sinus reported in the English language through 2011, and classified them into three types according to accompanying anomalies and the site of the fistula. RESULTS: Twenty-eight studies involving 31 cases were reviewed and classified. A type I sinus was a midline sinus without accompanying anomalies. There were 13 such cases, with a female predilection. Type II sinuses were midline sinuses with accompanying anomalies, and there were nine such cases. Type III sinuses were lateral sinuses with or without accompanying anomalies; there were nine cases. CONCLUSIONS: Our classification scheme is not only convenient for clinical application, but also reflects the embryological process responsible for congenital lip sinuses.

The inverted Batman incision: a new incision in transcolumellar incision for open rhinoplasty.

Columellar and nostril shapes often present irregularity after transcolumellar incision for open rhinoplasty, because of the contracture of the incised wound. The present study introduces a new technique to prevent this complication, and verifies its efficacy in improving cosmetic appearance. In our new method, a zig-zag incision with three small triangular flaps is made on the columella and in the pericolumellar regions of the bilateral nostril rims. Since the shape of the incision resembles the contour of an inverted "batman", we term our new method the "Inverted Batman" incision. To verify the effectiveness of the Inverted Batman incision, aesthetic evaluation was conducted for 21 patients operated on using the conventional transcolumellar incision (Conventional Group) and 19 patients operated on using the Inverted Batman incision (Inverted Batman Group). The evaluation was performed by three plastic surgeons, using a four-grade scale to assess three separate items: symmetry of bilateral soft triangles, symmetry of bilateral margins of the columella, and evenness of the columellar surface. The scores of the two groups for these three items were compared using a non-parametric test (Mann-Whitney U-test). With all three items, the Inverted Batman group patients present higher scores than Conventional Group patients. The Inverted Batman incision is effective in preserving the correct anatomical structure of the columella, soft triangle, and nostril rims. Hence, we recommend the Inverted Batman incision as a useful technique for open rhinoplasty.

Involvement of the sphenosquamosal suture for unilateral coronal synostosis.

The etiology of the clinical entity commonly known as unilateral coronal synostosis is often described as the unilateral fusion of the coronal ring. However, recent theories have poorly explained the basis of the deformities associated with unilateral coronal synostosis. We retrospectively analyzed computed tomographic data sets from 18 patients who presented with unilateral coronal synostosis and arrived at our hospital between 1985 and 2010. Using three-dimensional reconstructions of the computed tomographic images, analyses of the cranial base and measurements of each cranial bone were performed. As a result, the ipsilateral and contralateral basion-clinoid-pterion angles did not differ significantly (P = 0.49) and were almost identical in each case. However, the ipsilateral basion-partis-petrosae angle was wider than the corresponding contralateral angle (P < 0.001). In addition, the ipsilateral nasion-clinoid-pterion angle and the sphenoid, zygomatic, and temporal bones on the ipsilateral side were significantly shorter than those on the contralateral side (P < 0.001). Based on a shortening ratio, the sphenoid bone was smaller (42.0% ± 10.9%) than the temporal (68.9% ± 7.58%) and zygomatic bones (71.1% ± 8.38%). This difference was significant (P < 0.001). In conclusion, restricted growth potential of the central portion of the ipsilateral sphenoid bone was identified. We propose that the coronal ring, which includes the frontoparietal and frontosphenoidal sutures, and the sphenosquamosal suture are involved in unilateral coronal synostosis. Using our findings and the theory of Delashaw et al, the deformity observed in unilateral coronal synostosis can be explained more adequately and/or completely.

The boomerang osteotomy -- a new method of reduction malarplasty.

BACKGROUND: To achieve optimal outcomes in reduction malarplasty, it is important to preserve the natural curvature of the cheek while reducing the zygoma prominence and the width of the midface. The present article introduces an effective technique that aims to achieve these purposes. METHODS: Through an intraoral approach, boomerang-shaped bone incision lines are marked on the anterior aspect of the zygomatico-maxillary junction. The lines are placed medial to the most prominent part of the zygoma. The zygomatic arch is divided at its posterior part through a small incision made in the pre-auricular region. By performing these manoeuvres, a unit of bone-composed of a part of the zygoma body and zygomatic arch - is mobilised. The mobilised bone is shifted medially, reducing the width of the midface and making the zygoma region less prominent. After performing reduction malarplasty for 89 patients (10 males and 79 females) using this technique, clinical outcomes were evaluated. RESULTS: Outcomes of the treatment was optimal, with over 80% of the patients evaluating the results as excellent in terms of effectiveness in malar prominence, facial width and symmetry. CONCLUSION: Because the continuity of the main part of the zygoma body and zygomatic arch is preserved in our technique, medial transfer of the zygoma is enabled while preserving the natural curvature of the malar region and the superior-inferior position of the zygomatic arch. Because of these advantages, we recommend our technique as an effective technique of reduction malarplasty.

Anthropometric evaluation of bilateral cleft lip nose with cone beam computed tomography in early childhood: Estimation of nasal tip collapse.

BACKGROUND: Nasal tip features of cleft lip nose cannot be defined well using conventional measurement methods. Therefore, we developed a new method in which vertical nasal tip (the pronasale) position is evaluated based on the Frankfurt-Horizontal plane. This measurement was applied to bilateral cleft lip patients in early childhood. METHODS: Cone beam computed tomography (CT) records of bilateral cleft lip patients after primary rhinoplasty aged from 5 to 8 years (n = 13) were investigated retrospectively. As age-matched controls, data from a normal group (n = 17) and complete unilateral cleft lip group after primary rhinoplasty (n = 19) were included. In each group, nasolabial angle (ß), nasal tip angle (α), nasal width (al-al), columellar length (sn-c' ), nasal tip protrusion (sn-prn), and vertical nasal tip position (sn'-prn'/sn'-n') were investigated. RESULTS: With the exception of vertical nasal tip position and nasal width, the measurement data of the bilateral cleft lip patients were acceptable. In the bilateral cleft lip group, however, vertical nasal tip position was significantly higher and nasal width was significantly larger than those in the normal and unilateral groups (P < 0.0001 and P = 0.0298; P = 0.0001 and P = 0.0002, respectively). CONCLUSIONS: In cleft lip nose, the lower lateral cartilage that normally composes the nasal tip domes is splayed out, causing cephalic positioning of the pronasale. Nasal tip collapse was more severe in bilateral cleft lip than in the unilateral group. These results were compatible with the fact that many bilateral cleft lip patients require augmentation rhinoplasty after adolescence even after primary rhinoplasty.

New classification scheme of proboscis lateralis based on a review of 50 cases.

BACKGROUND: Among congenital nasal deformities, proboscis lateralis is one of the rarest. Boo-Chai classified proboscis lateralis into four groups. Recently, we encountered a new case of proboscis lateralis with median cleft lip. We noticed that this classification had not been considered according to convalescence and embryologics, and further refinement seemed to be needed. METHODS: We reviewed all cases of proboscis lateralis reported in English through 2009 and classified them by intercanthal distance. RESULTS: A total of 34 studies involving 50 cases were reviewed. Six cases were identified as having normal intercanthal distance. Three of them presented nose abnormalities and fit Boo-Chai group II category. The other three were consistent with group I. Hypertelorism was observed in 27 cases and was further divided into two groups based on the occurrence of a frontal encephalocele. Seventeen cases without a frontal encephalocele were compatible with Boo-Chai groups III and IV. The other 10 cases associated with a visible encephalocele had encephalopathy; most died at an early age, and long-term survival cases suffered developmental delay and mental retardation. Seventeen cases were defined as hypotelorism, and all cases also presented as holoprosencephaly. CONCLUSIONS: The redefined classification contains two new groups: group V as hypertelorism with encephalocele and group VI as hypotelorism. A new classification scheme is proposed as not only convenient for clinical application but also embryologically accurate.

An anatomical study on the position of the summit of the zygoma: theoretical bases for reduction malarplasty.

BACKGROUND: To achieve optimal outcomes in reduction malarplasty, the area of zygoma from which volume should be reduced must be accurately identified. This anatomical study aims to evaluate the location of the zygoma region that contributes most to the protrusion of the cheek. METHODS: The morphology of the zygoma was studied on 121 Japanese adults (73 men and 48 women). The midpoint of the inferior orbital rim, zygomaticomaxillary junction, the junction between the frontal process and the zygomatic arch, and the lateral orbital rim were marked to be used as anatomical reference points. Then, a vertical plane intersecting the anterior and posterior edges of the zygoma was marked. The point of the zygoma most distant from the plane was defined as the summit of the zygoma. Three-dimensional measurement using graphic software was performed, and the positional relationships between the summit and the four reference points were evaluated. RESULTS: In terms of horizontal position, the summit is located lateral to the lateral orbital rim and medial to the junction between the frontal process and the zygomatic arch. Regarding vertical position, the summit exists at higher positions in men than in women. CONCLUSIONS: The summit of the zygoma is located medial to the junction of the frontal process and zygomatic arch. Therefore, bone incision lines should be placed medial to the posterior edge of the frontal process in reduction malarplasty; effective correction of the protrusion cannot be achieved solely by detachment of the zygomatic arch. The summit is located higher for men than for women. Therefore, bone incision lines should be placed higher for men than for women.

Biomechanical analysis of the effect of intracranial pressure on the orbital distances in trigonocephaly.

OBJECTIVE: This biomechanical study aims to elucidate differences in how skulls with trigonocephaly, normal skulls, and postoperative trigonocephalic skulls respond to intracranial pressure and how this affects the orbital distances. MATERIALS AND METHODS: For 10 patients with trigonocephaly (8.2 ± 4.5 months), simulation models were produced based on the computed tomographic data of the skulls. These models were categorized as the Trigono group. For each model, a 15-mm Hg pressure was applied to the neurocranium to simulate the intracranial pressure. The interorbital distances expanded in response to the applied pressure. The amount of the change in the orbital distance was calculated using finite element analysis. The same processes were repeated for 10 models simulating normal skulls (the Control group) and postoperative trigonocephalic skulls (the Remodeled group). The changes in the orbital distance were compared among the three groups. RESULTS: The changes in the orbital distance were significantly smaller for the Trigono group than for the Control group. However, changes were significantly greater for the Remodeled group than for the Control group. CONCLUSION: The expansion of interorbital distances in response to the cranial pressure is restricted in skulls with trigonocephaly. This restriction is eliminated by performing remodeling of the skull. These findings explain why spontaneous correction of hypotelorism occurs postoperatively in trigonocephaly.

Reconstruction of the scalp with a calvarial defect.

PURPOSE: To review our clinical cases and devise a protocol for selecting the best operative methods to reconstruct the scalp with a calvarial defect. METHODS: We reviewed the original disease, the areas and depths of the scalp and calvarial defects, the methods of reconstruction, and complications in 20 patients. RESULTS: The defect was caused by secondary cranial infection following decompressive craniectomy for intracranial hemorrhage (ICH) in 11 patients; extensive removal of the scalp and calvaria for resection of a malignant tumor in 6 patients; and by secondary cranial infection following removal of a malignant tumor in 3 patients. Cranial infection was frequently associated with abscess formation around the fixation screws and plates, suggesting that artificial materials induced the infection. We reconstructed the defect using free flaps in 15 patients and using local flaps in 5 patients. CONCLUSIONS: When restoring the calvaria in the primary operation, the use of metal screws and plates should be minimized to prevent cranial infection and subsequent scalp and calvaria defects. Local flaps are appropriate for reconstructing relatively small defects (<20 cm(2)), whereas free flaps are better for reconstructing relatively large defects (>25 cm(2)).

Palatoplasty for bilateral oblique cleft of the soft palate accompanied by Tessier number 5·7 cleft.

Craniofacial cleft is a rare congenital deformity in which there are fissures of a facial structure classified by Tessier. A palatoplasty to reconstruct the muscle sling and to close the cleft of the velum was performed. Acceptable postoperative appearance of the velum was seen after 6 months. Although further follow-up is still needed for velopharyngeal function, this case report provides details of the anatomical deformities and our surgical approach to this atypical bilateral cleft palate.

Dynamic effects of the Nuss procedure on the spine in asymmetric pectus excavatum.

OBJECTIVE: This study aimed to elucidate dynamic effects of the Nuss procedure on the spine in the treatment of patients with pectus excavatum with asymmetric thoraces. METHODS: Twenty-five patients with pectus excavatum who underwent the Nuss procedure were categorized into 4 groups by preoperative morphology of the spine and thoracic asymmetry. In group 1 (n = 8), the right side of the thorax was concave and the spine bowed to the right. In group 2 (n = 4), the right side of the thorax was concave and the spine bowed to the left. In group 3 (n = 5), the left side of the thorax was concave and the spine bowed to the right. In group 4 (n = 8), the left side of the thorax was concave and the spine bowed to the left. With computed tomographic data, finite-element models were produced to simulate each patient's thorax. Thereafter, dynamic response patterns of the spine to the Nuss procedure were examined. Validity of these biomechanical findings was verified by referring to clinical outcomes. RESULTS: In group 1 and group 4 models, deformed spines were straightened; in group 2 and group 3 models, spinal bowing increased. These biomechanical findings were compatible with clinical evaluations. CONCLUSIONS: Performance of the Nuss procedure for asymmetric pectus excavatum exerts dynamic influence on the spine. Response patterns of the spine are predictable from morphologic relationships between the asymmetric patterns of the anterior thoracic wall and the spine.