Quantitative Flow Cytometry: Concerns and Recommendations in Clinic and Research.

BACKGROUND: Quantitative flow cytometry (QFCM) can be an important element within the developing toolbox for clinical diagnostics which relies on precise and rapid tests that provide a conclusive answer for physicians. The FC technology combines all of these features. Until recently, this imperative discipline was based on qualitative assessments of cell populations. However, due to the enormous advancement in FC technology, which allows the quantification of a number of antigens on cell surface and within the cells by units of median fluorescence intensity (MFI), this method becomes meaningful and fits the clinical needs. METHODS: On the basis of our experience in the field of quantitative FC, we wish to highlight some of the key concerns related to this methodology and suggest possible solutions for achieving uniform and standardized QFCM tests based on MFI. RESULTS: Several parameters are responsible for inter and intra laboratory variations. The standardization of quantitative FC relies on three major components; Samples and reagents handling, FC maintenance and data analysis. The use of specialized beads as a part of the routine calibration process lowers inter-test variability between different operators and different FC instruments. Similarly, the use of agreed biological controls contributes significantly to lowering test variability. CONCLUSIONS: The field of QFCM displays a significant part in the diagnostic clinical toolbox. We believe that the recommendations described herein can improve significantly the stability and accuracy of this method, thus assuring a more standardized cell analyses. © 2017 International Clinical Cytometry Society.

Impaired SNX9 Expression in Immune Cells during Chronic Inflammation: Prognostic and Diagnostic Implications.

Chronic inflammation is associated with immunosuppression and downregulated expression of the TCR CD247. In searching for new biomarkers that could validate the impaired host immune status under chronic inflammatory conditions, we discovered that sorting nexin 9 (SNX9), a protein that participates in early stages of clathrin-mediated endocytosis, is downregulated as well under such conditions. SNX9 expression was affected earlier than CD247 by the generated harmful environment, suggesting that it is a potential marker sensing the generated immunosuppressive condition. We found that myeloid-derived suppressor cells, which are elevated in the course of chronic inflammation, are responsible for the observed SNX9 reduced expression. Moreover, SNX9 downregulation is reversible, as its expression levels return to normal and immune functions are restored when the inflammatory response and/or myeloid-derived suppressor cells are neutralized. SNX9 downregulation was detected in numerous mouse models for pathologies characterized by chronic inflammation such as chronic infection (Leishmania donovani), cancer (melanoma and colorectal carcinoma), and an autoimmune disease (rheumatoid arthritis). Interestingly, reduced levels of SNX9 were also observed in blood samples from colorectal cancer patients, emphasizing the feasibility of its use as a diagnostic and prognostic biomarker sensing the host's immune status and inflammatory stage. Our new discovery of SNX9 as being regulated by chronic inflammation and its association with immunosuppression, in addition to the CD247 regulation under such conditions, show the global impact of chronic inflammation and the generated immune environment on different cellular pathways in a diverse spectrum of diseases.

Nucleus pulposus degeneration alters properties of resident progenitor cells.

BACKGROUND CONTEXT: The intervertebral disc (IVD) possesses a minimal capability for self-repair and regeneration. Changes in the differentiation of resident progenitor cells can represent diminished tissue regeneration and a loss of homeostasis. We previously showed that progenitor cells reside in the nucleus pulposus (NP). The effect of the degenerative process on these cells remains unclear. PURPOSE: We sought to explore the effect of IVD degeneration on the abundance of resident progenitor cells in the NP, their differentiation potential, and their ability to give rise to NP-like cells. We hypothesize that disc degeneration affects those properties. STUDY DESIGN: Nucleus pulposus cells derived from healthy and degenerated discs were methodically compared for proliferation, differentiation potential, and ability to generate NP-like cells. METHODS: Intervertebral disc degeneration was induced in 10 skeletally, mature mini pigs using annular injury approach. Degeneration was induced in three target discs, whereas intact adjacent discs served as controls. The disc degeneration was monitored using magnetic resonance imaging for 6 to 8 weeks. After there was a clear evidence of degeneration, we isolated and compared cells from degenerated discs (D-NP cells [NP-derived cells from porcine degenerated discs]) with cells isolated from healthy discs (H-NP cells) obtained from the same animal. RESULTS: The comparison showed that D-NP cells had a significantly higher colony-forming unit rate and a higher proliferation rate in vitro. Our data also indicate that although both cell types are able to differentiate into mesenchymal lineages, H-NP cells exhibit significantly greater differentiation toward the chondrogenic lineage and NP-like cells than D-NP cells, displaying greater production of glycosaminoglycans and higher gene expression of aggrecan and collagen IIa. CONCLUSIONS: Based on these findings, we conclude that IVD degeneration has a meaningful effect on the cells in the NP. D-NP cells clearly go through the regenerative process; however, this process is not powerful enough to facilitate full regeneration of the disc and reverse the degenerative course. These findings facilitate deeper understanding of the IVD degeneration process and trigger further studies that will contribute to development of novel therapies for IVD degeneration.

Microcomputed tomography-based structural analysis of various bone tissue regeneration models.

Microcomputed tomography (microCT) analysis is a powerful tool for the evaluation of bone tissue because it provides access to the 3D microarchitecture of the bone. It is invaluable for regenerative medicine as it provides the researcher with the opportunity to explore the skeletal system both in vivo and ex vivo. The quantitative assessment of macrostructural characteristics and microstructural features may improve our ability to estimate the quality of newly formed bone. We have developed a unique procedure for analyzing data from microCT scans to evaluate bone structure and repair. This protocol describes the procedures for microCT analysis of three main types of mouse bone regeneration models (ectopic administration of bone-forming mesenchymal stem cells, and administration of cells after both long bone defects and cranial segmental bone defects) that can be easily adapted for a variety of other models. Precise protocols are crucial because the system is extremely user sensitive and results can be easily biased if standardized methods are not applied. The suggested protocol takes 1.5-3.5 h per sample, depending on bone tissue sample size, the type of equipment used, variables of the scanning protocol and the operator's experience.

Targeted gene-and-host progenitor cell therapy for nonunion bone fracture repair.

Nonunion fractures present a challenge to orthopedics with no optimal solution. In-vivo DNA electroporation is a gene-delivery technique that can potentially accelerate regenerative processes. We hypothesized that in vivo electroporation of an osteogenic gene in a nonunion radius bone defect site would induce fracture repair. Nonunion fracture was created in the radii of C3H/HeN mice, into which a collagen sponge was placed. To allow for recruitment of host progenitor cells (HPCs) into the implanted sponge, the mice were housed for 10 days before electroporation. Mice were electroporated with either bone morphogenetic protein 9 (BMP-9) plasmid, Luciferase plasmid or injected with BMP-9 plasmid but not electroporated. In vivo bioluminescent imaging indicated that gene expression was localized to the defect site. Microcomputed tomography (µCT) and histological analysis of murine radii electroporated with BMP-9 demonstrated bone formation bridging the bone gap, whereas in the control groups the defect remained unbridged. Population of the implanted collagen sponge by HPCs transfected with the injected plasmid following electroporation was noted. Our data indicate that regeneration of nonunion bone defect can be attained by performing in vivo electroporation with an osteogenic gene combined with recruitment of HPCs. This gene therapy approach may pave the way for regeneration of other skeletal tissues.

Genetically modified mesenchymal stem cells induce mechanically stable posterior spine fusion.

Most spine fusion procedures involve the use of prosthetic fixation devices combined with autologous bone grafts rather than biological treatment. We had shown that spine fusion could be achieved by injection of bone morphogenetic protein-2 (BMP-2)-expressing mesenchymal stem cells (MSCs) into the paraspinal muscle. In this study, we hypothesized that posterior spinal fusion achieved using genetically modified MSCs would be mechanically comparable to that realized using a mechanical fixation. BMP-2-expressing MSCs were injected bilaterally into paravertebral muscles of the mouse lumbar spine. In one control group BMP-2 expression was inhibited. Microcomputed tomography and histological analyses were used to evaluate bone formation. For comparison, a group of mouse spines were bilaterally fused with stainless steel pins. The harvested spines were later tested using a custom four-point bending apparatus and structural bending stiffness was estimated. To assess the degree to which MSC vertebral fusion was targeted and to quantify the effects of fusion on adjacent spinal segments, images of the loaded spine curvature were analyzed to extract rigidity of the individual spinal segments. Bone bridging of the targeted vertebrae was observed in the BMP-2-expressing MSC group, whereas no bone formation was noted in any control group. The biomechanical tests showed that MSC-mediated spinal fusion was as effective as stainless steel pin-based fusion and significantly more rigid than the control groups. Local analysis showed that the distribution of stiffness in the MSC-based fusion group was similar to that in the steel pin fusion group, with the majority of spinal stiffness contributed by the targeted fusion at L3-L5. Our findings demonstrate that MSC-induced spinal fusion can convey biomechanical rigidity to a targeted segment that is comparable to that achieved using an instrumental fixation.

Genetically modified cells in regenerative medicine and tissue engineering.

Regenerative medicine appears to take as its patron, the Titan Prometheus, whose liver was able to regenerate daily, as the field attempts to restore lost, damaged, or aging cells and tissues. The tremendous technological progress achieved during the last decade in gene transfer methods and imaging techniques, as well as recent increases in our knowledge of cell biology, have opened new horizons in the field of regenerative medicine. Genetically engineered cells are a tool for tissue engineering and regenerative medicine, albeit a tool whose development is fraught with difficulties. Gene-and-cell therapy offers solutions to severe problems faced by modern medicine, but several impediments obstruct the path of such treatments as they move from the laboratory toward the clinical setting. In this review we provide an overview of recent advances in the gene-and-cell therapy approach and discuss the main hurdles and bottlenecks of this approach on its path to clinical trials and prospective clinical practice.

The use of a synthetic oxygen carrier-enriched hydrogel to enhance mesenchymal stem cell-based bone formation in vivo.

A major hurdle to surmount in bone-tissue engineering is ensuring a sufficient oxygen supply to newly forming tissue to avoid cell death or delayed development of osteogenic features. We hypothesized that an oxygen-enriched hydrogel scaffold would enhance tissue-engineered bone formation in vivo. To test this, we used a well-characterized mesenchymal stem cell (MSC) line, Tet-off BMP2 MSC, whose cells were engineered to express recombinant human bone morphogenetic protein-2. Cells were suspended in hydrogel supplemented with perfluorotributylamine (PFTBA) and implanted subcutaneously in an ectopic site, a radial bone defect, or a lumbar paravertebral muscle (mouse model of spinal fusion) in C3H/HeN mice. For controls, we used cells suspended in the same gel without PFTBA. In the ectopic site, there were significant increases in bone formation (2.5-fold increase), cell survival, and osteocalcin activity in the PFTBA-supplemented groups. PFTBA supplementation significantly increased structural parameters of bone in radial bone defects and triggered a significant 1.4-fold increase in bone volume in the spinal fusion model. We conclude that synthetic oxygen carrier supplementation of tissue-engineered implants enhances ectopic bone formation and yields better bone quality and volume in bone-repair and spinal fusion models, probably due to increased cell survival.