Evaluation of a New Method for CyberKnife Treatment for Central Lung and Mediastinal Tumors by Tracheobronchial Tracking.

BACKGROUND: CyberKnife treatment for central lung tumors and mediastinal tumors can be difficult to perform with marker less. PURPOSE: We aimed to evaluate a novel tracheobronchial-based method (ie, tracheobronchial tracking) for the purpose of minimally invasive CyberKnife treatment for central lung and mediastinal tumors. METHODS: Five verification plans were created using an in-house phantom. Each plan included five irradiation sessions. The reference plan irradiated and tracked the simulated tumor (using the target tracking volume, TTV). Trachea plans tracked the simulated tracheo-bronchus and irradiated the simulated tumor and included two types of subplans: correlated plans in which the displacement of the simulated tracheobronchial and the simulated tumor were correlated, and non-correlated plans in which these factors were not correlated. Moreover, 15 mm and 25 mm TTVs were evaluated for each plan. The sin waveform and the patient's respiratory waveform were prepared as the respiratory model. Evaluations were performed by calculating the dose difference between the radiophotoluminescent glass dosimeter (RPLD)-generated mean dose values (generated by the treatment planning system, TPS) and the actual absorbed RPLD dose. Statistical analyses were performed to evaluate findings for each plan. Correlation and prediction errors were calculated for each axis of each plan using log files to evaluate tracking accuracy. RESULTS: Dose differences were statistically significant only in comparisons with the non-correlated plan. When evaluated using the sin waveform, the mean values for correlation and prediction errors in each axis and for all plans were less than 0.6 mm and 0.1 mm, respectively. In the same manner, they were less than 1.1 mm and 0.2 mm when evaluated using the patient's respiratory waveform. CONCLUSION: Our newly-developed tracheobronchial tracking method would be useful in facilitating minimally invasive CyberKnife treatment in certain cases of central lung and mediastinal tumors.

Cycle-generative adversarial network-based bone suppression imaging for highly accurate markerless motion tracking of lung tumors for cyberknife irradiation therapy.

PURPOSE: Lung tumor tracking during stereotactic radiotherapy with the CyberKnife can misrecognize tumor location under conditions where similar patterns exist in the search area. This study aimed to develop a technique for bone signal suppression during kV-x-ray imaging. METHODS: Paired CT images were created with or without bony structures using a 4D extended cardiac-torso phantom (XCAT phantom) in 56 cases. Subsequently, 3020 2D x-ray images were generated. Images with bone were input into cycle-consistent adversarial network (CycleGAN) and the bone suppressed images on the XCAT phantom (BSIphantom ) were created. They were then compared to images without bone using the structural similarity index measure (SSIM) and peak signal-to-noise ratio (PSNR). Next, 1000 non-simulated treatment images from real cases were input into the training model, and bone-suppressed images of the patient (BSIpatient ) were created. Zero means normalized cross correlation (ZNCC) by template matching between each of the actual treatment images and BSIpatient were calculated. RESULTS: BSIphantom values were compared to their paired images without bone of the XCAT phantom test data; SSIM and PSNR were 0.90 ± 0.06 and 24.54 ± 4.48, respectively. It was visually confirmed that only bone was selectively suppressed without significantly affecting tumor visualization. The ZNCC values of the actual treatment images and BSIpatient were 0.763 ± 0.136 and 0.773 ± 0.143, respectively. The BSIpatient showed improved recognition accuracy over the actual treatment images. CONCLUSIONS: The proposed bone suppression imaging technique based on CycleGAN improves image recognition, making it possible to achieve highly accurate motion tracking irradiation.

Evaluation of computed tomography metal artifact and CyberKnife fiducial recognition for novel size fiducial markers.

PURPOSE: This study aimed to compare fiducial markers used in CyberKnife treatment in terms of metal artifact intensity observed in CT images and fiducial recognition in the CyberKnife system affected by patient body thickness and type of marker. METHODS: Five markers, ACCULOC 0.9 mm × 3 mm, Ball type Gold Anchor (GA) 0.28 mm × 10 mm, 0.28 mm × 20 mm, and novel size GA 0.4 mm × 10 mm, 0.4 mm × 20 mm were evaluated. To evaluate metal artifacts of CT images, two types of CT images of water-equivalent gels with each marker were acquired using Aquilion LB CT scanner, one applied SEMAR (SEMAR-on) and the other did not apply this technique (SEMAR-off). The evaluation metric of artifact intensity (MSD ) which represents a variation of CT values were compared for each marker. Next, 5, 15, and 20 cm thickness of Tough Water (TW) was placed on the gel under the condition of overlapping the vertebral phantom in the Target Locating System, and the live image of each marker was acquired to compare fiducial recognition. RESULTS: The mean MSD of SEMAR-off was 78.80, 74.50, 97.25, 83.29, and 149.64 HU for ACCULOC, GA0.28 mm × 10 mm, 20 mm, and 0.40 mm × 10 mm, 20 mm, respectively. In the same manner, that of SEMAR-on was 23.52, 20.26, 26.76, 24.89, and 33.96 HU, respectively. Fiducial recognition decreased in the order of 5, 15, and 20 cm thickness, and GA 0.4 × 20 mm showed the best recognition at thickness of 20 cm TW. CONCLUSIONS: We demonstrated the potential to reduce metal artifacts in the CT image to the same level for all the markers we evaluated by applying SEMAR. Additionally, the fiducial recognition of each marker may vary depending on the thickness of the patient's body. Particularly, we showed that GA 0.40 × 20 mm may have more optimal recognition for CyberKnife treatment in cases of high bodily thickness in comparison to the other markers.

Effect of a hydrogel spacer on the intrafractional prostate motion during CyberKnife treatment for prostate cancer.

The purpose of this study was to evaluate the effect of a hydrogel spacer on intrafractional prostate motion during CyberKnife treatment. The retrospective study enrolled 24 patients (with the hydrogel spacer = 12, without the hydrogel spacer = 12) with two fiducial markers. Regarding intrafractional prostate motion, the offset values (mm) of three axes (X-axis; superior [+] to inferior [-], Y-axis; right [+] to left [-], Z-axis; posterior [+] to anterior [-]) obtained from fiducial markers position between a digitally reconstructed radiographs images and live images in the Target Locating System were used, and extracted from generated log files. The mean values of the offset and each standard deviation were calculated for each patient, and both the groups were compared. For all the patients, a total of 2204 offset values and timestamps (without the hydrogel spacer group: 1065, with the hydrogel spacer group: 1139) were recorded for the X-, Y-, and Z-axes, respectively. The offset values (mean ± standard deviation) for the X-, Y-, and Z-axes were -0.04 ± 0.92 mm, -0.03 ± 0.97 mm (P = 0.66), 0.02 ± 0.51, -0.02 ± 0.49 mm (P = 0.50), and 0.56 ± 0.97 mm, 0.34 ± 1.07 mm (P = 0.14), in patients inserted without or with the hydrogel spacer, respectively. There was no effect of a hydrogel spacer on the intrafractional prostate motion in the three axes during CyberKnife treatment for prostate cancer.

Comparison of CT artifacts and image recognition of various fiducial markers including two types of thinner fiducial markers for CyberKnife treatment.

AIM: The aim of the study was to evaluate computed tomography (CT) artifacts and image recognition of the CyberKnife system. Regarding fiducial markers, VISICOIL of 0.5 mm × 5.0 mm and 0.75 mm × 5.0 mm, ball-shaped Gold Anchor (GA) of 0.28 mm × 10 mm and 0.28 mm × 20 mm, were compared with the standard cylinder marker of 0.9 mm × 3.0 mm (ACCULOC). BACKGROUND: Recently, various kinds of commercial fiducial markers have been available in CyberKnife treatment. MATERIALS AND METHODS: The CT images of a water equivalent gel with each fiducial marker were acquired for the evaluation of CT artifacts. The evaluation was performed using the standard deviation of Hounsfield Unit (HU) value for a rectangle region near the fiducial marker. Then, to evaluate the image recognition, each fiducial marker was located to overlap in the target locating system (TLS) for the two sites; the vertebral bone and the pubic bone. RESULTS: For CT artifacts, the standard deviations of the VISICOIL of 0.5 mm × 5.0 mm was the smallest. The image recognition of four fiducial markers had a value close to the standard cylinder marker and was feasible for common use, but was slightly poorer when using GA of 0.28 mm × 10 mm in the dynamic conditions. CONCLUSION: Our results indicated that VISICOIL 0.5 × 5.0 mm and the GAs can be used nearly always for CyberKnife treatment in spite of their much thinner needles than those of cylinder types.

Time-temperature superposition principle for the kinetic analysis of destabilization of pharmaceutical emulsions.

The time-temperature superposition principle (TTSP) was applied to the destabilization kinetics of a pharmaceutical emulsion. The final goal of this study is to predict precisely the emulsion stability after long-term storage from the short-period accelerated test using TTSP. As the model emulsion, a cream preparation that is clinically used for the treatment of pruritus associated with chronic kidney disease was tested. After storage at high temperatures ranging from 30 to 45 °C for designated periods, the emulsion state was monitored using magnetic resonance imaging, and then the phase separation behaviors observed were analyzed according to the Arrhenius approach applying TTSP. The Arrhenius plot showed a biphasic change around 35 °C, indicating that the separation behaviors of the sample were substantially changed between the lower (30-35 °C) and higher (35-45 °C) temperature ranges. This study also monitored the coalescence behavior using a backscattered light measurement. The experiment verified that the destabilization was initiated by coalescence of oil droplets and then it eventually led to obvious phase separation via creaming. Furthermore, we note the coalescence kinetics agreed well with the phase separation kinetics. Therefore, in the case of the sample emulsion, the coalescence behavior has a dominant influence on the destabilization process. This study offers a profound insight into the destabilization process of pharmaceutical emulsions and demonstrates the promising applicability of TTSP to pharmaceutical research.

Prediction of color changes in acetaminophen solution using the time-temperature superposition principle.

A prediction method for color changes based on the time-temperature superposition principle (TTSP) was developed for acetaminophen solution. Color changes of acetaminophen solution are caused by the degradation of acetaminophen, such as hydrolysis and oxidation. In principle, the TTSP can be applied to only thermal aging. Therefore, the impact of oxidation on the color changes of acetaminophen solution was verified. The results of our experiment suggested that the oxidation products enhanced the color changes in acetaminophen solution. Next, the color changes of acetaminophen solution samples of the same head space volume after accelerated aging at various temperatures were investigated using the Commission Internationale de l'Eclairage (CIE) LAB color space (a*, b*, L* and ΔE*ab), following which the TTSP was adopted to kinetic analysis of the color changes. The apparent activation energies using the time-temperature shift factor of a*, b*, L* and ΔE*ab were calculated as 72.4, 69.2, 72.3 and 70.9 (kJ/mol), respectively, which are similar to the values for acetaminophen hydrolysis reported in the literature. The predicted values of a*, b*, L* and ΔE*ab at 40 °C were obtained by calculation using Arrhenius plots. A comparison between the experimental and predicted values for each color parameter revealed sufficiently high R(2) values (>0.98), suggesting the high reliability of the prediction. The kinetic analysis using TTSP was successfully applied to predicting the color changes under the controlled oxygen amount at any temperature and for any length of time.

Prediction of color changes using the time-temperature superposition principle in liquid formulations.

This study reports the results of applying the time-temperature superposition principle (TTSP) to the prediction of color changes in liquid formulations. A sample solution consisting of L-tryptophan and glucose was used as the model liquid formulation for the Maillard reaction. After accelerated aging treatment at elevated temperatures, the Commission Internationale de l'Eclairage (CIE) LAB color parameters (a*, b*, L*, and E*ab) of the sample solution were measured using a spectrophotometer. The TTSP was then applied to a kinetic analysis of the color changes. The calculated values of the apparent activation energy of a*, b*, L*, and ΔE*ab were 105.2, 109.8, 91.6, and 103.7 kJ/mol, respectively. The predicted values of the color parameters at 40°C were calculated using Arrhenius plots for each of the color parameters. A comparison of the relationships between the experimental and predicted values of each color parameter revealed the coefficients of determination for a*, b*, L*, and ΔE*ab to be 0.961, 0.979, 0.960, and 0.979, respectively. All the R(2) values were sufficiently high, and these results suggested that the prediction was highly reliable. Kinetic analysis using the TTSP was successfully applied to calculating the apparent activation energy and to predicting the color changes at any temperature or duration.

Synthesis of a membrane protein with two transmembrane regions.

A membrane protein with two transmembrane domains was synthesized by means of the thioester method. The F1F0 ATP synthase subunit c (Sub.c), which consists of 79 amino acid residues (MW 8257), was chosen as a target. For synthetic purposes, two building blocks, Boc-[Lys34(Boc)]-Sub.c(1-38)-SCH2CH2CO-Ala and Sub.c(39-79), were synthesized via solid-phase methods using Boc chemistry. RP-HPLC purification conditions for the transmembrane peptide were examined. As a result, a combination of a mixture of formic acid, 1-propanol and water with a phenyl column was found to be useful for separating the transmembrane peptide. The purified building blocks were condensed in DMSO in the presence of silver chloride, 3,4-dihydro-3-hydroxy-4-oxo-1,2,3-benzotriazine (HOOBt), N,N-diisopropylethylamine to give the product, Sub.c, after removal of Boc groups (yield 16%). The yield of the condensation reaction could be improved to 23% by raising the reaction temperature to 50 degrees C, and to 26% when a mixture of chloroform and methanol was used as a solvent.