ABSTRACT
The study and applications of in vivo skin optics have been openly documented as early as the year 1954, or possibly earlier. To date, challenges in analyzing the complexities of this field remain, with wide scopes requiring more scrutiny. Recent advances in spectroscopic research and multivariate analytics allow a closer look into applications potentially for detecting or monitoring diseases. One of the challenges in this field is in establishing a reference for applications which correspond to certain bandwidths. This article reviews the scope on past research on skin spectroscopy, and the clinical aspects which have or may have applications on disease detection or enhancing diagnostics. A summary is supplied on the technicalities surrounding the measurements reported in literature, focused towards the wavelength-dependent applications in themes central to the respective research. Analytics on the topology of the papers' data cited in this work is also provided for a statistical perspective. In short, this paper strives to immediately inform the reader with possible applications via the spectroscopic devices at hand. Graphical Abstract .
Subject(s)
Optics and Photonics/methods , Skin Diseases/diagnosis , Skin/chemistry , Blood Circulation , Erythema/pathology , Humans , Infant , Melanins/chemistry , Melanins/metabolism , Monitoring, Physiologic/methods , Optics and Photonics/instrumentation , Oximetry/methods , Skin/blood supply , Spectrometry, Fluorescence , Spectrophotometry, Ultraviolet , Spectroscopy, Fourier Transform Infrared , Spectroscopy, Near-Infrared/methods , Spectrum Analysis, RamanABSTRACT
Dengue diagnostics have come a long way. Attempts at breaking away from lab-oriented dengue detection, such as NS1 antigen, IgM or IgG antibodies detection have extensively received numerous coverage. As a result, rapid detection tests (RDTs) have started to gain inroads in medical practice. Rapid detection tests notwithstanding, analysis of blood serum is still a relatively complicated task. This includes the necessity of phlebotomy, centrifugation for blood serum, and other reagent-based tests. Therefore, a non-invasive method of dengue detection was considered. In this study, we present the utility of diffuse reflectance skin spectroscopy (bandwidth of 200-2500nm) on the forearm during the triaging period for dengue screening potential. This is performed with multivariate analysis of 240 triaged febrile/suspected dengue patients. The data is then scrutinized for its clinical validity to be included as either confirmed or probable dengue, or a control group. Based on discriminant analysis of several data normalization models, we can predict the patients' clinical dengue-positivity at ranges of accuracy between ~93-98% depending on mode of the data, with a probably optimal sensitivity and specificity to the clinical diagnosis of ~89% and ~100% respectively. From the outcomes of this study, we recommend further trials with cautious optimism. With these findings, it is hoped that the elusive non-invasive detection of tropical diseases may gain platform in the near future.
Subject(s)
Dengue/diagnostic imaging , Mass Screening/methods , Skin/diagnostic imaging , Spectrum Analysis/methods , Adolescent , Adult , Aged , Aged, 80 and over , Female , Humans , Malaysia , Male , Middle Aged , Multivariate Analysis , Sensitivity and Specificity , Young AdultABSTRACT
OBJECTIVES: The evaluation of sources of error when preparing, printing, and using 3-dimensional (3D) printed head models for training purposes. METHODS: Two 3D printed models were designed and fabricated using actual patient imaging data with reference marker points embedded artificially within these models that were then registered to a surgical navigation system using 3 different methods. The first method uses a conventional manual registration, using the actual patient's imaging data. The second method is done by directly scanning the created model using intraoperative computed tomography followed by registering the model to a new imaging dataset manually. The third is similar to the second method of scanning the model but eventually uses an automatic registration technique. The errors for each experiment were then calculated based on the distance of the surgical navigation probe from the respective positions of the embedded marker points. RESULTS: Errors were found in the preparation and printing techniques, largely depending on the orientation of the printed segment and postprocessing, but these were relatively small. Larger errors were noted based on a couple of variables: if the models were registered using the original patient imaging data as opposed to using the imaging data from directly scanning the model (1.28 mm vs. 1.082 mm), and the accuracy was best using the automated registration techniques (0.74 mm). CONCLUSION: Spatial accuracy errors occur consistently in every 3D fabricated model. These errors are derived from the fabrication process, the image registration process, and the surgical process of registration.
Subject(s)
Imaging, Three-Dimensional/standards , Neuronavigation/standards , Phantoms, Imaging/standards , Printing, Three-Dimensional/standards , Surgery, Computer-Assisted/standards , Humans , Imaging, Three-Dimensional/methods , Neuronavigation/methods , Surgery, Computer-Assisted/methodsABSTRACT
OBJECTIVES: This study uses a new approach for classifying the human ethnicity according to the auditory brain responses (electroencephalography [EEG] signals) with a high level of accuracy. Moreover, the study presents three different algorithms used to classify the human ethnicity using auditory brain responses. The algorithms were tested on Malays and Chinese as a case study. MATERIALS AND METHODS: The EEG signal was used as a brain response signal, which was evoked by two auditory stimuli (Tones and Consonant Vowels stimulus). The study was carried out on Malaysians (Malay and Chinese) with normal hearing and with hearing loss. A ranking process for the subjects' EEG data and the nonlinear features was used to obtain the maximum classification accuracy. RESULTS: The study formulated the classification of Normal Hearing Ethnicity Index and Sensorineural Hearing Loss Ethnicity Index. These indices classified the human ethnicity according to brain auditory responses by using numerical values of response signal features. Three classification algorithms were used to verify the human ethnicity. Support Vector Machine (SVM) classified the human ethnicity with an accuracy of 90% in the cases of normal hearing and sensorineural hearing loss (SNHL); the SVM classified with an accuracy of 84%. CONCLUSION: The classification indices categorized or separated the human ethnicity in both hearing cases of normal hearing and SNHL with high accuracy. The SVM classifier provided a good accuracy in the classification of the auditory brain responses. The proposed indices might constitute valuable tools for the classification of the brain responses according to the human ethnicity.
Subject(s)
Electroencephalography/instrumentation , Evoked Potentials, Auditory/physiology , Hearing Loss, Sensorineural/physiopathology , Hearing Loss/physiopathology , Acoustic Stimulation/methods , Adult , Algorithms , Audiometry, Pure-Tone/methods , China/epidemiology , China/ethnology , Ethnicity/statistics & numerical data , Hearing Loss, Sensorineural/diagnosis , Hearing Loss, Sensorineural/ethnology , Humans , Language , Malaysia/ethnology , Male , Middle Aged , Noise/adverse effects , Speech Perception/physiology , Support Vector Machine/standardsABSTRACT
BACKGROUND: Navigation (image guidance) is an essential tool in modern neurosurgery, and most surgeons use an optical tracking system. Although the technology is accurate and reliable, one often is confronted by line of sight issues that interrupt the flow of an operation. There has been feedback on the matter, but the actual problem has not been accurately quantified, therefore making this the primary aim of this study. It is particularly important given that robotic technology is gradually making its way into neurosurgery and most of these devices depend on optical navigation when procedures are being conducted. METHODS: In this study, the frequency and causes of line of sight issues is assessed using recordings of Navigation probe locations and its synchronised video recordings. RESULTS: The mentioned experiment conducted for a series of 15 neurosurgical operations. This issue occured in all these surgeries except one. Maximum duration of issue presisting reached up to 56% of the navigation usage time. CONCLUSIONS: The arrangment of staff and equipment is a key factor in avoiding this issue.
Subject(s)
Clinical Competence , Neuronavigation/methods , Neurosurgeons , Neurosurgical Procedures/methods , Optical Imaging/methods , Surgery, Computer-Assisted/methods , Humans , Neuronavigation/instrumentation , Neurosurgical Procedures/instrumentation , Optical Imaging/instrumentation , Surgery, Computer-Assisted/instrumentationABSTRACT
OBJECTIVES: The hearing process in the brain is very complicated and hard to solve. However, an understanding of the hearing process is an essential issue and needed in many rehabilitation or treatment applications. This study investigates and compares the effects of simple and complex sounds on latency and amplitude of various event-related potential (ERP) components to male ethnic Malay adults. Comparisons were made with previous studies. MATERIALS AND METHODS: Simple and complex sounds were used (pure tones and the naturally produced Malay consonant-vowels [CVs]) to evoke the cortical auditory-evoked potential (CAEP) signals. Moreover, this study analyzed the influence of related CAEP components that are distinct to the selected population and determined which of the ERP components among (CAEP) components is most affected by the two distinct stimuli. Moreover, the study used classification algorithms to discover the ability of the brain in distinguishing CAEP evoked by stimuli contrasts. RESULTS: The results showed some resemblance between our results and ERP waveforms outlined in previous studies conducted on native speakers of English. On the other hand, it was also observed that the P1 and N2 had a significant effect in amplitude due to different stimulus. CONCLUSION: The results show high classification accuracy for the brain to distinguish auditory stimuli. Moreover, the results indicated some resemblance to previous studies conducted on native English speakers using similar tones and English CV stimuli. However, the amplitudes and latencies of the P1 were found to have a significant difference due to stimuli complexity.
ABSTRACT
There are many products claiming to be an electronic solution towards repelling mosquitoes. Several reviews were published in debunking these claims. However, there is a lack of a systematic study on effects of electromagnetic (EM) or more specifically, radio frequency (RF) waves against mosquitoes due to the conclusions made in those years. Therefore, we attempt to establish a fundamental study on female Aedes Aegypti (Linnaeus) mosquitoes by quantifying the collective behavior of the mosquitoes against a continuous stream of low-powered RF signals via a broadband horn antenna using image processing methods. By examining the average lateral and vertical positions of the mosquitoes versus frequency and time, the data shows negligible consistency in the reactions of the mosquitoes toward the different frequencies ranging from 10 to 20,000.00 MHz, with a step of 10 MHz. This was done by examining 33 hours of spatiotemporal data, which was divided into three sessions. All three sessions showed totally different convolutions in the positions in arbitrary units based on the raster scan of the image processing output. Several frequencies apparently showed up to 0.2-70% shift in both lateral and vertical components along the spectrum, without repeatability for all three sessions. This study contributes to the following: A pilot study for establishing the collective effects of RF against mosquitoes, open-source use, and finally a low-cost and easily adaptable platform for the study of EM effects against any insects.
Subject(s)
Aedes/physiology , Behavior, Animal/physiology , Aedes/radiation effects , Animals , Behavior, Animal/radiation effects , Female , Mosquito Control/instrumentation , Pilot Projects , Radio WavesABSTRACT
Classifying and quantifying mosquito activity includes a plethora of categories, ranging from measuring flight speeds, repellency, feeding rates, and specific behaviors such as home entry, swooping and resting, among others. Entomologists have been progressing more toward using machine vision for efficiency for this endeavor. Digital methods have been used to study the behavior of insects in labs, for instance via three-dimensional tracking with specialized cameras to observe the reaction of mosquitoes towards human odor, heat and CO2, although virtually none was reported for several important fields, such as repellency studies which have a significant need for a proper response quantification. However, tracking mosquitoes individually is a challenge and only limited number of specimens can be studied. Although tracking large numbers of individual insects is hailed as one of the characteristics of an ideal automated image-based tracking system especially in 3D, it also is a costly method, often requiring specialized hardware and limited access to the algorithms used for mapping the specimens. The method proposed contributes towards (a) unlimited open source use, (b) a low-cost setup, (c) complete guide for any entomologist to adapt in terms of hardware and software, (d) simple to use, and (e) a lightweight data output for collective behavior analysis of mosquitoes. The setup is demonstrated by testing a simple response of mosquitoes in the presence of human odor versus control, one session with continuous human presence as a stimuli and the other with periodic presence. A group of female Aedes aegypti (Linnaeus) mosquitoes are released into a white-background chamber with a transparent acrylic panel on one side. The video feed of the mosquitoes are processed using filtered contours in a threshold-adjustable video. The mosquitoes in the chamber are mapped on the raster where the coordinates of each mosquito are recorded with the corresponding timestamp. The average distance of the blobs within the frames against time forms a spectra where behavioral patterns can be observed directly, whether any collective effect is observed. With this method, 3D tracking will not be required and a more straightforward data output can be obtained.
Subject(s)
Aedes/physiology , Spatial Behavior , Algorithms , Animals , Automation , Female , Humans , Odorants , Software , Spatial Behavior/physiologyABSTRACT
A printed Bow-Tie slot antenna with loaded stub is proposed and the effects of changing the dimensions of the slot area, the stub and load sizes are considered in this paper. These parameters have a considerable effect on the antenna characteristics as well as its performance. An in-depth parametric study of these dimensions is presented. This paper proposes the necessary conditions for initial approximation of dimensions needed to design this antenna. In order to achieve the desired performance of the antenna fine tuning of all sizes of these parameters is required. The parametric studies used in this paper provide proper trends for initiation and tuning the design. A prototype of the antenna for 1.7GHz to 2.6GHz band is fabricated. Measurements conducted verify that the designed antenna has wideband characteristics with 50% bandwidth around the center frequency of 2.1GHz. Conducted measurements for reflection coefficient (S11) and radiation pattern also validate our simulation results.
Subject(s)
Equipment Design , Wireless TechnologyABSTRACT
In this paper, a new compact wideband monopole antenna is presented for wireless communication applications. This antenna comprises of a new radiating patch, a new arc-shaped strip, microstrip feed line, and a notched ground plane. The proposed radiating patch is combined with a rectangular and semi-circular patch and is integrated with a partial ground plane to provide a wide impedance bandwidth. The new arc-shaped strip between the radiating patch and microstrip feed line creates an extra surface on the patch, which helps further widen the bandwidth. Inserting one step notch on the ground plane further enhances the bandwidth. The antenna has a compact size of 16×20×1.6mm3. The measured result indicated that the antenna achieves a 127% bandwidth at VSWR≤2, ranging from 4.9GHz to 22.1GHz. Stable radiation patterns with acceptable gain are achieved. Also, a measured bandwidth of 107.7% at VSWR≤1.5 (5.1-17GHz) is obtained, which is suitable for UWB outdoor propagation. This antenna is compatible with a good number of wireless standards, including UWB band, Wimax 5.4 GHz band, MVDDS (12.2-12.7GHz), and close range radar and satellite communication in the X-band (8-12GHz), and Ku band (12-18GHz).
Subject(s)
Communication , Equipment Design , Radar/instrumentation , Wireless Technology/instrumentation , Calibration , Electric Impedance , Electromagnetic Radiation , Equipment Design/standardsABSTRACT
Research on joint torque reduction in robot manipulators has received considerable attention in recent years. Minimizing the computational complexity of torque optimization and the ability to calculate the magnitude of the joint torque accurately will result in a safe operation without overloading the joint actuators. This paper presents a mechanical design for a three dimensional planar redundant manipulator with the advantage of the reduction in the number of motors needed to control the joint angle, leading to a decrease in the weight of the manipulator. Many efforts have been focused on decreasing the weight of manipulators, such as using lightweight joints design or setting the actuators at the base of the manipulator and using tendons for the transmission of power to these joints. By using the design of this paper, only three motors are needed to control any n degrees of freedom in a three dimensional planar redundant manipulator instead of n motors. Therefore this design is very effective to decrease the weight of the manipulator as well as the number of motors needed to control the manipulator. In this paper, the torque of all the joints are calculated for the proposed manipulator (with three motors) and the conventional three dimensional planar manipulator (with one motor for each degree of freedom) to show the effectiveness of the proposed manipulator for decreasing the weight of the manipulator and minimizing driving joint torques.