Optimized spray-dried conditions' impact on fatty acid profiles and estimation of in vitro digestion of spray-dried chia/fish oil microcapsules.

Long-chain polyunsaturated fatty acids (LCPUFA) are of interest due to their potential health properties and have a significant role in reducing the risk of various chronic diseases in humans. It is commonly used as a supplement. However, lipid oxidation is an important negative factor caused by environmental, processing, and limited water solubility of LCPUFA, making them difficult to incorporate into food products. The objective of this research work was to prevent oxidation, extend shelf life, enhance the stability of fatty acids, and to achieve controlled release by preparing spray-dried powder (SDM). For spray-drying, aqueous emulsion blends were formulated using a 1:1 ratio of chia seed oil (CSO) and fish oil (FO) and using a laboratory-scale spray-dryer with varying conditions: inlet air temperature (IAT, 125-185 °C), wall material (WM, 5-25%), pump speed (PS, 3-7 mL/min), and needle speed (NS, 3-11 s). The maximum alpha-linolenic acid (ALA) content was 33 ± 1%. The highest values of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) in the microcapsules were 8.4 ± 0.4 and 13 ± 1%, respectively. Fourier transform infrared and X-Ray diffraction analysis results indicated that SDM was successfully formulated with Gum Arabic and maltodextrin (MD). The blending without encapsulation of CSO and FO was digested more efficiently and resulted in more oil being released with simulated gastric fluid (SGF), simulated intestinal fluid (SIF), and SGF + SIF conditions without heating. No significant changes were observed for saturated, monounsaturated, and LCPUFA, whether exposed or not to gastrointestinal conditions. However, compared to the release of SDM, it can be useful for designing delivery systems for the controlled release of essential fatty acids.

Systematic Implications of Palynomorph Diversity Using Microscopic Trends Among Asteraceous Flora From the Drylands of Baluchistan, Pakistan.

Pollen micromorphological traits with taxonomic implications are first reported from the study area for 50 Asteraceous taxa belonging to nine tribes. Cichorieae (21 taxa), Cardueae (11 taxa), Inuleae (six taxa), and Anthemideae (four taxa) are the leading tribes. The research included Cousinia haeckeliae, Himalaiella afghana, Pterachaenia stewartii (endemic to Afghanistan and Pakistan), and Xylanthemum macropodum (endemic to Baluchistan). Light and scanning electron microscopy were employed for the visualization of pollen photomicrographs. The data was analyzed statistically via SPSS, PAST, and Origin. Significant diagnostic qualitative and quantitative palynological traits were explored for discrimination down to the species level within the tribes. All the investigated taxa possessed radial symmetry, isopolarity, and monad form (characters for distinction at the subdivision level). The aperture types were trizonocolporate, tetrazonocolporate, and tricolporate with number position and character (NPC) formulas N3P4C5, N4P4C5, and N3P4C3. Goniotreme, peritreme, and ptychotreme types of amb were recognized. Echinate, echinate lophate, scabrate, and gemmate sculpturing were present with and without perforated surface patterns. Variations in the shapes in polar and equatorial views and lacuna shapes further assisted the separation of taxa. The observed shape classes were perprolate, prolate spheroidal, prolate, subprolate, oblate spheroidal, suboblate, and oblate. Principal component analysis, correlation, standard probability plots, and ridge line paired features plot for quantitative variables determined the positive correlation between the length and width of colpi in equatorial and polar view with polar axis and equatorial diameter and number of spines between colpi with the number of spines per pollen. The number of spines per pollen was negatively correlated with the width and length of colpi in the polar view. Multiple sample analysis of variance (ANOVA) concluded that a high statistically significant difference exists among the means of analyzed traits. The examined qualitative and quantitative palynological traits revealed noticeable variations, thus providing the source for species discrimination in Asteraceous tribes.

Eco-friendly extraction of antibacterial compounds from enriched olive pomace: a design-of-experiments approach to sustainability.

The increasing interest in utilizing olive pomace bioactive molecules to advance functional elements and produce antioxidant and antimicrobial additives underscores the need for eco-friendly extraction and purification methods. This study aims to develop an eco-friendly extraction method to evaluate the effect of extraction parameters on the recovery of bioactive molecules from enriched olive pomace. The effects were identified based on total phenolic and flavonoid contents and antioxidant activity, employing a design of experimental methodology. The positive and the negative simultaneous effects showed that among the tested enrichments, those incorporating Nigella Sativa, dates, and coffee demonstrated superior results in terms of the measured responses. Furthermore, chromatographic analysis unveiled the existence of intriguing compounds such as hydroxytyrosol, tyrosol, and squalene in distinct proportions. Beyond this, our study delved into the structural composition of the enriched pomace through FTIR analysis, providing valuable insights into the functional groups and chemical bonds present. Concurrently, antimicrobial assays demonstrated the potent inhibitory effects of these enriched extracts against various microorganisms, underscoring their potential applications in food preservation and safety. These findings highlight enriched olive pomace as a valuable reservoir of bioactive molecules for food products since they can enhance their anti-oxidative activity and contribute to a sustainable circular economy model for olive oil industries.

Apigenin ameliorates genitourinary dysfunction in a type 1 diabetic rat model via Drp1 modulation.

The present study aimed to explore the potential ameliorative effect of apigenin (APG) against diabetes-associated genitourinary complications in rats. A diabetic rat model was induced by the intraperitoneal injection of streptozotocin (STZ). All experimental animals were treated with vehicle or vehicle plus APG at a dose of 0.78 mg/kg/day for 10 days, either once diabetes was confirmed or at the end of the 3rd week after confirmation of diabetes. Rats were sacrificed at the end of the fifth week. In addition to the histological assessment, an analysis of kidney function tests and serum testosterone was performed to assess diabetic genitourinary complications. Gene expression of the mitochondrial fission protein, dynamin related protein 1 (Drp1), was measured in renal and testicular tissues using qRT PCR. APG can increase body weight, reduce blood glucose levels, and improve renal and testicular functions in diabetic rats. APG decreased Drp1 overexpression in diabetic animals' kidneys and testes. In summary, our current work discloses that APG attenuates diabetic genitourinary lesions in rats via suppressing Drp1 overexpression.

Phytochemicals, Health-Promoting Effects, and Enzyme Inhibition Traits of Phlomis stewartii Extracts.

Phlomis stewartii is a wild, perennial woody plant used for diverse therapeutic targets. The present work evaluated the influence of independent variables such as extraction time, solvent concentration, and speed in the range of (100 mL, 150 mL, and 200 mL), (2 h, 5 h, and 8 h), and (100 rpm, 150 rpm, and 200 rpm), respectively, on extraction yields, phytochemical components, total phenolic contents (TPC), and total flavonoid contents (TFC) of P. stewartii extract. In the present work, response surface methodology (RSM) was applied to optimize the extraction yield. High-performance liquid chromatography (HPLC) was performed to detect the bioactive constituents of the extracts. The potent extracts were analyzed to study α-amylase and α-glucosidase inhibitory activities. Under the optimized conditions of solvent concentration (200 mL), extraction time (8 h), and speed (150 rpm), the whole plant methanol extract (WPME) showed a maximum extraction yield of 13.5%, while the leaves methanol extract (LME) showed a maximum TPC of 19.5 ± 44 mg of gallic acid equivalent (GAE) per gram of extract and a maximum TFC of 4.78 ± 0.34 mg of quercetin equivalent (QE) per gram of extract. HPLC analysis showed the presence of p-coumaric, gallic acid, quercetin, salicylic acid, sinapic acid, and vanillic acid. LME showed the highest α-amylase inhibitory activity (IC50 = 46.86 ± 0.21 µg/mL) and α-glucosidase inhibitory activity (IC50 value of 45.81 ± 0.17 µg/mL). Therefore, in conclusion, LME could be considered to fix the α-amylase and α-glucosidase-mediated disorders in the human body to develop herbal phytomedicine.

Comprehensive study of allergenic tree species: Palynological insights enhanced by HPLC and GC-MS profiling.

Considering the limited data available on tree species in Uzbekistan, this research aimed to provide new insights. We gathered plant samples from different locations within Samarkand city and thoughtfully selected 15 tree species that represent the country's flora. Using scanning electron microscopy, we conducted comprehensive analyses of pollen morphology, revealing a diverse range of variations in the shapes, dimensions, and surface characteristics displayed by pollen grains. Distinct ornamentations such as micro-echinate, reticulate, rugulate, gemmate-verrucate, and verrucate-scabrate patterns facilitated the differentiation of species. These scanning electron microscopy findings enhance our comprehension of tree species diversity, adaptation, and ecological roles. In addition, leaf extracts were analyzed using HPLC and GC-MS, revealing a plethora of bioactive compounds, including catechins, chlorogenic acid, vanillic acid, and others. Furthermore, GC-MS analysis revealed the presence of seven key compounds, including 1-hexadecyne, 2-chloroethanol, 1,6-heptadiene, 2-methyl-, 5-bromoadamantan-2-one, ethyl 3-(3-pyridyl) propenoate, bis (2-ethylhexyl) phthalate, and quercetin. This study demonstrates the effectiveness of this method in assessing the quality of leaf extracts from tree species by examining both microscopic characteristics and chemical composition. This multifaceted approach has deepened our understanding of the characteristics and chemical compositions of these trees, thus contributing to a more profound appreciation of their ecological significance and potential applications.

Hazardous waste management (Buxus papillosa) investment for the prosperity of environment and circular economy: Response surface methodology-based simulation.

Dealing with the current defaults of environmental toxicity, heating, waste management, and economic crises, exploration of novel non-edible, toxic, and waste feedstock for renewable biodiesel synthesis is the need of the hour. The present study is concerned with Buxus papillosa with seeds oil concentration (45% w/w), a promising biodiesel feedstock encountering environmental defaults and waste management; in addition, this research performed simulation based-response surface methodology (RSM) for Buxus papillosa bio-diesel. Synthesis and application of novel Phyto-nanocatalyst bimetallic oxide with Buxus papillosa fruit capsule aqueous extract was advantageous during transesterification. Characterization of sodium/potassium oxide Phyto-nanocatalyst confirmed 23.5 nm nano-size and enhanced catalytic activity. Other characterizing tools are FTIR, DRS, XRD, Zeta potential, SEM, and EDX. Methyl ester formation was authenticated by FTIR, GC-MS, and NMR. A maximum 97% yield was obtained at optimized conditions i.e., methanol ratio to oil (8:1), catalyst amount (0.37 wt%), reaction duration (180 min), and temperature of 80 °C. The reusability of novel sodium/potassium oxide was checked for six reactions. Buxus papillosa fuel properties were within the international restrictions of fuel. The sulphur content of 0.00090% signified the environmental remedial nature of Buxus papillosa methyl esters and it is a highly recommendable species for biodiesel production at large scale due to a t huge number of seeds production and vast distribution.

A rare rotated, medially displaced fracture-dislocation of the medial clavicle - Case report and review of the literature.

Clavicle fractures combined with sternoclavicular joint dislocations are very rare injuries that need to be addressed quickly and treated effectively due to the altered biomechanics of the shoulder girdle as well as to the potential damages to the surrounding "noble" anatomical structures. A diagnostic and therapeutic algorithm for such injuries has not yet been established. Computer Tomography with 3D reconstruction should be the diagnostic gold standard. In case of a highly displaced fracture and/or dislocation in an active patient, surgical treatment is advised in order to obtain proper bone and joint healing with satisfactory functional outcomes as well as to protect the surrounding anatomical structures from potential damages. We present the case of an 18-year-old male, skeletally mature patient, who had a fall while snowboarding. Subsequently he was diagnosed with a very uncommon combination of a displaced medial clavicle fracture and complete posterior Sterno-Clavicular dislocation with 111° rotation of the sternoclavicular fragment. We opted for surgery, decided to use "off-label" a 2.5 V-plate Ulna plate long (Medartis®) and to associate this procedure with a Sterno-Clavicular arthrodesis with tape-augmentation to stabilize the SC joint; this treatment strategy resulted in a good clinical outcome without any remaining instability and satisfactory ROM. We collected this case to describe this seldom combination, to show our treatment strategy and to advocate the creation of a standardized diagnostic and therapeutic algorithm. X-rays, Computer Tomography images and intraoperative photos are presented.

Evaluation of bipolar Transurethral Enucleation and Resection of the Prostate in terms of efficiency and patient satisfaction compared to retropubic open prostatectomy in prostates larger than 80 cc. A prospective randomized study.

OBJECTIVES: To compare the outcomes of bipolar Transurethral Enucleation Resection of the Prostate (TUERP) and simple retropubic prostatectomy in patients with prostate volumes larger than 80 cc. PATIENTS AND METHODS: A prospective randomized study included all patients amenable to surgeries for benign prostate hyperplasia (BPH) with prostate size over 80 cc at a tertiary care hospital between January 2020 to February 2022. Bipolar TUERP and Retropubic open prostatectomy techniques were compared regarding patients' demographics, intraoperative parameters, outcomes, and peri-operative complications. RESULTS: Ninety patients were included in our study and randomly assigned to bipolar TUERP (Group 1 = 45 patients) and retropubic open prostatectomy (Group 2 = 45 patients). The TUERP group demonstrated significantly lower operative time (77 ± 11 minutes vs. 99 ± 14 minutes, p < 0.001), hemoglobin drop (median = 1.1 vs. 2.5, p < 0.001), and resected tissue weight (71 ± 6.6 cc vs. 84.5 ± 10.6 cc, p < 0.001). Postoperatively, the TUERP group demonstrated significantly lower catheter time (median = 2 vs. 7 days, p < 0.001) and less hospital stay. IPSS, Qmax, and patient satisfaction were better in the TUERP group within six months of surgery. We reported 90-day complications after TUERP in 13.3% of patients compared to 17.8% after retropubic prostatectomy, with a statistically insignificant difference. Urethral stricture predominated after TUERP, while blood transfusion dominated in retropubic prostatectomy. CONCLUSIONS: The present study found that TUERP had equivalent efficacy and safety to open retropubic prostatectomy for patients with BPH and prostate volumes > 80 ml.

Effect of cold-pressed Nigella sativa seed meal on dough quality and nutritional value of bread.

This study investigated the application of black cumin meal (BCM) obtained from cold-pressing Nigella sativa seeds in bread baking. The effect of BCM on bread rheological traits and its nutritional value were investigated. Zeleny sedimentation, falling number, Farinograph, and Extensograph values in flour mixed with BCM (2.5%, 5%, 7.5%, and 10%) were evaluated. In addition, mineral content, protein, fat, thymoquinone, and crude cellulose contents in bread were investigated. Zeleny sedimentation and falling number values decreased with the increase in BCM in the flour samples. The water absorption, development time, stability, and softening degree values of the dough measured in the Farinograph device did not show a statistically significant difference in the flour with the BCM mixture compared to the control sample. The energy value and extensibility determined in the Extensograph device decreased with the increase in the amount of BCM in the flour. The amount of protein and crude fiber in bread increased with the increase in the amount of BCM. It was noted that there were significant increases in Fe, Ca, Mg, K, and Zn levels with the increase in BCM. Meanwhile, thymoquinone was not found in the bread samples containing BCM. The results revealed that the nutritional values of BCM-mixed bread are rich in protein, minerals, and cellulose.

Antioxidant and Anticancer Assessment and Phytochemical Investigation of Three Varieties of Date Fruits.

Date palm (Phoenix dactylifera L.) fruits contain high concentrations of phenolic compounds, particularly flavonoids and other micronutrients, which impact human health due to their potent antioxidant, anti-inflammatory, and anticancer characteristics. In the present study, the effect of ethyl acetate, hydroethanol, hydromethanol, and aqueous extract from three date palm varieties (i.e., Ajwa, Siwi, and Sukkari) on phytochemical profiles and antioxidant and anticancer activities was investigated. Fruit extracts were screened for their antioxidant activity using the DPPH· method. Phenolic constituents were quantified and identified using HPLC-DAD. Extracts (ethyl acetate, hydroethanol, and hydromethanol) were assessed for cytotoxicity on nine human cancer cell lines, i.e., MG-63, HCT116, MCF7, MDA-MB-231, HEPG2, HUH7, A549, H460, and HFB4, using the sulphorhodamine-B (SRB) assay. Results showed that the ethyl acetate extract of the Sukkari fruits has the greatest antioxidant potential with an IC50 value of 132.4 ± 0.3 µg·mL-1, while the aqueous extract of Ajwa date fruits exhibited the lowest antioxidant effect with an IC50 value of 867.1 ± 0.3 µg·mL-1. The extracts exhibited potent to moderate anticancer activities against the investigated cancer cell line in a source-dependent manner. Methanol extract of Siwi fruits exhibited the most potent anticancer activity (IC50 = 99 ± 1.6 µg·mL-1), followed by the same extract of Sukkari fruits with an IC50 value of 119 ± 3.5 µg·mL-1 against the cell line of human breast cancer (MDA-MB-231). Additionally, principal component analysis (PCA) was investigated to determine the relationship among the investigated traits and treatments. Our findings reveal that date palm fruit-derived extracts are excellent sources of biologically active constituents and substantiate their potential use in new anticancer strategies from natural resources.

Micromorphological Sculptural Diversity in Foliar Epidermis and Trichomes Features among Invasive Species.

This study examines the role of light microscopic (LM) and scanning electron microscopic (SEM) micromorphological traits of the epidermis in identifying and classifying invasive plants. SEM was conducted to increase our understanding of microscopic qualities that are not visible in light microscopy and to elucidate unclear affinities among invasive species. The study examines invasive species' morphological and anatomical characteristics from the Pothohar Plateau of Pakistan for the first time. The results showed that various micromorphological features are very useful for species' accurate identification. Adaxial and abaxial surfaces of leaves showed variations in subsidiary cells, glands, anticlinal wall patterns, stomata, and epidermal cells. Epidermal cell shapes observed were irregular, elongated, rectangular, and polygonal. Epidermal cells having maximum length were calculated in Stellaria media (126.3 µm) on adaxial side. On the abaxial surface, the minimum length was noticed in Eucalyptus camaldulensis (28.5 µm). Both glandular and nonglandular trichomes were examined, ranging from unicellular to multicellular. Most of the investigated specimens of leaves were amphistomatic, while some were hypostomatic, like Alternanthera pungens, Calotropis procera, Cannabis sativa, Lantana camara, and Thevetia peruviana. Leaf epidermal morphology contains numerous useful systematic features for accurate identifications of plant species. The micromorphological attributes under observation provide a standard criterion to the researcher for identifications of invasive flora in future morpho-taxonomic studies.

Capsaicin Rich Low-Fat Salad Dressing: Improvement of Rheological and Sensory Properties and Emulsion and Oxidative Stability.

This study aimed to investigate the potential use of cold-pressed hot pepper seed oil by-product (HPOB) in a low-fat salad dressing to improve its rheological properties, emulsion, and oxidative stability. The total phenolic content (TPC), the 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, and CUPRIC reducing antioxidant capacity (CUPRAC) values were 317.4 mg GAE/100 g, 81.87%, and 6952.8 mg Trolox/100 g, respectively. The capsaicin, dihydrocapsaicin, and total carotenoid content were 175.8 mg/100 g, 71.01 mg/100 g, and 106.3 µg/g, respectively. All emulsions indicated shear-thinning, viscoelastic solid-like behavior, and recoverable characteristics, which were improved via enrichment with HPOB. The thermal loop test showed that the low-fat sample formulated with 3% HPOB indicated little change in the G* value, showing that it exhibited high emulsion stability. The induction period values (IP) of the salad dressing samples containing HPOB (between 6.33 h and 8.33 h) were higher than the IP values of the control samples (3.20 h and 2.58 h). The enrichment with HPOB retarded the formation of oxidative volatile compounds of hexanal, nonanal, and 1-octene-3-ol. According to the results presented in this study, HPOB could be effectively used in a low-fat salad dressing to enhance its rheological characteristics and oxidative stability.

Cement Augmented Pedicle Screw Instrumentation in Pediatric Spine Surgery.

BACKGROUND: Osteoporosis in pediatric patients is rare. Osteomalacia and osteoporosis are known to develop in syndromic or neuromuscular scoliosis children. Spinal deformity surgery for pediatric patients with osteoporosis is challenging, associated with pedicle screw (PS) failure and compression fractures. Cement augmentation of PS is one several measures to prevent screw failure. It provides additional pull-out strength to the PS in the osteoporotic vertebra. METHODS: In 2010-2020, an analysis of pediatric patients who had cement augmentation of PS with a minimum follow-up of 2 years was performed. Radiological and clinical evaluations were analyzed. RESULTS: The study included 7 patients (4 girls, 3 boys) with a mean age of 13 years (range, 10-14 years) and mean follow-up of 3 years (range, 2-3 years). Only 2 patients underwent revision surgery. Total number of cement augmented PSs was 52 with an average of 7 per patient. Only 1 patient had lower instrumented vertebra vertebroplasty. There was no PS pull-out in the cement augmented levels, and there were no neurological deficits or pulmonary cement embolisms. One patient developed a PS pull-out in uncemented levels. Two patients developed compression fractures, one, with osteogenesis imperfecta, in the supra-adjacent levels (upper instrumented vertebra + 1 and upper instrumented vertebra + 2), and the other, with neuromuscular scoliosis, in the uncemented segments. CONCLUSIONS: In this study, all cement augmented PSs provided satisfactory radiological outcomes without PS pull-out and adjacent vertebral compression fracture. In pediatric spine surgery, in osteoporotic patients with a poor bone purchase, cement augmentation may be used, especially in high-risk patients with osteogenesis imperfecta, neuromuscular scoliosis, and syndromic scoliosis.

Hardware-in-the-loop testing of simple and intelligent MPPT control algorithm for an electric vehicle charging power by photovoltaic system.

In this paper, an electric vehicle (EV) charging station powered by a photovoltaic (PV) system has been created to charge EVs. Furthermore, the maximum available power from the PV system was extracted using a new algorithm called the simplified universal intelligent PID (SUIPID) controller, which has the advantages of simplicity in design and intelligence. The SUIPID controller was compared to the artificial neural networks (ANNs), the fuzzy logic controller (FLC) based on linear membership functions, and the FLC based on particle swarm optimization (PSO) to optimize its parameters under various conditions. The system simulation was first performed using MATLAB software, then an experimental set up was conducted to confirm the theoretical work. The proposed SUIPID responds 28.5%, 44.4%, and 61.5% faster than the PSO-FLC, ANN, and FLC, respectively, whereas the ITAE error was reduced by 27.3%, 52.9%, and 65.2%, respectively. Also, the charging procedure of the EV battery is precisely steady under different atmospheric conditions. The SUIPID controller has several advantages over other intelligent algorithms, most notably its ease of design and implementation.

Membrane-processed honey samples for pollen characterization with health benefits.

Better processing techniques must be utilized widely due to the rising demand for honey. The most common honey processing techniques are applied to melissopalynomorphs to check the quality and quantity of valuable honey using microporous ultrafiltration membranes. It is essential to have the ability to selectively filter out sugars from honey using ultrafiltration. This study authenticated 24 honey samples using membrane reactors ultrafiltration protocol to describe the pollen spectrum of dominant vegetation. The purpose of this study was also to explore nutritional benefits as well as the active phytochemical constituents of honey samples. Honey samples were collected and labeled Acacia, Eucalyptus, and Ziziphus species based on plant resources provided by local beekeepers. A variety of honeybee flora was collected around the apiaries between 2020 and 2021. Honey analysis revealed that the pollen extraction of 24 bee foraging species belonging to 14 families. The honey membrane technology verified the identities of honey and nectar sources. Also, pollen identified using honey ultrafiltration membranes revealed dominant resources: Acacia spp. (69%), Eucalyptus spp. (52%) and Ziziphus spp. Honey filtration using a membrane technology classified 14 samples as unifloral, represented by six dominant pollen types. The absolute pollen count in the honey sample revealed that 58.33% (n = 14) belong to Maurizio's class I. Scanning ultrasculpturing showed diverse exine patterns: reticulate, psilate, scabrate-verrucate, scabrate-gemmate, granulate, perforate, microechinate, microreticulate, and regulate to fossulate for correct identification of honey pollen types. Honey ultrafiltration should be utilized to validate the botanical sources of honey and trace their biogeographic authenticity. Thus, it is imperative to look at the alternative useful method to identify the botanical origin of filtered honey. It is critical to separate honey from adulteration by a standardized protocol. Membrane technology has yielded significant outcomes in the purification of honey.

Transdiscal Screw Fixation in L5-S1 Adult Spondylolisthesis: Technical Note and Midterm Outcomes of a Case Series.

BACKGROUND: Spondylolisthesis changes the pelvic morphology and sagittal spinopelvic alignment with abnormality compared to individuals with similar pelvic morphology. There are many treatment options including a combination of decompression and fusion. In spondylolisthesis patients with high-grade spondylolisthesis, bone to bone contact (closed intradiscal space), and high-grade disc degeneration with disc collapse, fusion is challenging. METHODS: From 2011 through 2020, an analysis of L5-S1 spondylolisthesis patients who had L5-S1 transdiscal screw fixation with a minimum follow-up of 2 years was performed. Radiological evaluation and clinical measures were compared preoperatively and postoperatively. Postoperative complications were analyzed. Also, L5-S1 degree fusion was analyzed using a computed tomography scan. RESULTS: Eight patients of L5-S1 spondylolisthesis with a mean follow-up of 69 (25-122) months. All patients were female; the average age was 58 (43-78) years. 4 patients presented with high-grade spondylolisthesis (Meyerding grade III). Among the patients, 3 patients were undergoing revision surgery. Only 5 patients had interbody fusion for their adjacent levels. In the postoperative follow-up, none of the patients had neurological deficits. Radiological evaluations of L5-S1 level showed fusion in all patients. Only 1 patient had rod failure and was advised for revision surgery. CONCLUSIONS: L5-S1 transdiscal screw fixation may provide a satisfactory rigid fixation and fusion at the L5-S1 level in cases of spondylolisthesis. This technique requires a surgeon's experience. Despite the challenge of this technique, it can provide a safe option for acquiring rigid stabilization.

Streptococcus pseudopneumoniae as an emerging respiratory tract pathogen at Assiut University hospitals.

Background and Objectives: Streptococcus pseudopneumoniae is a member of viridans streptococci. It is non-capsulated, bile insoluble and optochin susceptible in ambient air but resistant in 5% CO2. This study aimed to isolate S. pseudopneumoniae from sputum specimens of patients admitted to Chest Department and Chest ICU of Assiut University hospitals, differentiate it from Streptococcus pneumoniae in addition, to evaluate the prevalence of Streptococcus pseudopneumoniae in clinical isolates by phenotypic and genotypic methods, to subject the isolates to antimicrobial susceptibility testing using agar disc diffusion method. Materials and Methods: Isolation of Streptococcus pseudopneumoniae from sputum sample and doing phenotypic test (optochin susceptibility test,bile susceptibility test and antimicrobial susceptibility test) and genotypic test by polymerase chain reaction (PCR) for five genes: CpsA, LytA, AliB-like ORF2, 16S rRNA and Spn9802 genes. Results: Twenty isolates of S. pseudopneumoniae were diagnosed phenotypically by optochin susceptibility and bile solubility tests followed by genotypic characterization by polymerase chain reaction (PCR) for five genes: CpsA, LytA, AliB-like ORF2, 16S rRNA and Spn9802 genes. The prevalence of S. pseudopneumoniae among studied patients was 10% (20/200). Conclusion: The pure growth of S. pseudopneumoniae from sputum samples together with the great percentage of antibiotic resistance should raise attention to the clinical importance of this organism.