Application of 32 factorial design for loratadine-loaded nanosponge in topical gel formulation: comprehensive in-vitro and ex vivo evaluations.

Loratadine (LoR) is a highly lipophilic and practically insoluble in water, hence having a low oral bioavailability. As it is formulated as topical gel, it competitively binds with the receptors, thus reducing the side-effects. The objective of this study was to prepare LoR loaded nanosponge (LoR-NS) in gel for topical delivery. Nine different formulations of emulsion were prepared by solvent evaporation method with polyvinyl alcohol (PVA), ethyl cellulose (EC), and dichloromethane (DCM). Based on 32 Full Factorial Design (FFD), optimization was carried out by varying the concentration of LOR:EC ratio and stirring rate. The preparations were subjected for the evaluation of particle size (PS), in vitro release, zeta potential (ZP) and entrapment efficiency (EE). The results revealed that the NS dispersion was nanosized with sustained release profiles and significant PS. The optimised formulation was formulated and incorporated into carbopol 934P hydrogel. The formulation was then examined to surface morphological characterizations using scanning electron microscopy (SEM) which depicted spherical NS. Stability studies, undertaken for 2 months at 40 ± 2 °C/75 ± 5% RH, concluded to the stability of the formulation. The formulation did not cause skin irritation. Therefore, the prepared NS hydrogel proved to be a promising applicant for LoR as a novel drug delivery system (NDDS) for safe, sustained and controlled topical application.

Preparation and characterization of a curcumin nanoemulsion gel for the effective treatment of mycoses.

Fungal infections of skin including mycoses are one of the most common infections in skin or skins. Mycosis is caused by dermatophytes, non-dermatophyte moulds and yeasts. Various studies show different drugs to treat mycoses, yet there is need to treat it with applied drugs delivery. This study was designed to prepare a bio curcumin (CMN) nanoemulsion (CMN-NEs) for transdermal administration to treat mycoses. The self-nanoemulsification approach was used to prepare a nanoemulsion (NE), utilizing an oil phase consisting of Cremophor EL 100 (Cre EL), glyceryl monooleate (GMO), and polyethylene glycol 5000 (PEG 5000). Particle size (PS), polydispersity index (PDI), zeta potential (ZP), Fourier transform infrared (FTIR) spectrophotometric analysis, and morphological analyses were performed to evaluate the nanoemulsion (NE). The in vitro permeation of CMN was investigated using a modified vertical diffusion cell with an activated dialysis membrane bag. Among all the formulations, a stable, spontaneously produced nanoemulsion was determined with 250 mg of CMN loaded with 10 g of the oil phase. The average droplet size, ZP, and PDI of CMN-NEs were 90.0 ± 2.1 nm, - 7.4 ± 0.4, and 0.171 ± 0.03 mV, respectively. The release kinetics of CMN differed from zero order with a Higuchi release profile as a result of nanoemulsification, which also significantly increased the flux of CMN permeating from the hydrophilic matrix gel. Overall, the prepared nanoemulsion system not only increased the permeability of CMN but also protected it against chemical deterioration. Both CMN-ME (24.0 ± 0.31 mm) and CMN-NE gel (29.6 ± 0.25 mm) had zones of inhibition against Candida albicans that were significantly larger than those of marketed Itrostred gel (21.5 ± 0.34 mm). The prepared CMN-NE improved the bioavailability, better skin penetration, and the CMN-NE gel enhanced the release of CMN from the gel matrix on mycotic patients.

Green synthesis of ginger-encapsulated zinc oxide nanoparticles: Unveiling their characterization and selective cytotoxicity on MDA-MB 231 breast cancer cells.

Zinc oxide nanoparticles (ZnO-NPs) were synthesized using ginger (Zingiber officinale) extracts in a green synthesis approach and evaluated their in vitro cytotoxicity effect on the MDA-MB 231 breast cancer cell line. The bottom-up approach was employed to develop the green-synthesized ginger-encapsulated ZnO-NPs (GZnO-NPs) without using hazardous substances. The most substantial Fourier-transform infrared absorption peak of the ginger root extract was seen at 1634.24 cm-1. The peak also confirmed the presence of ginger root extract-encapsulated ZnO-NPs at 1556.79, 1471.54, and 1019.83 cm-1. It indicates that the biomolecules found in plant extracts behave as capping agents, aiding in the formation of nanoparticles. The mean particle sizes (PSs) of optimized GZnO-NPs of the ratios 1:2 were found to be 104.01 ± 7.12 nm with a zeta potential of -11.5 ± 1.31 mV. The X-ray diffraction and scanning electron microscope analysis confirmed that the prepared nanoparticles were spherical and crystalline, with PS ranging from 100 to 150 nm. The GZnO-NPs were subjected to MTT assay and cellular migration potential, and it was found that the inhibitory concentration on the MDA-MB 231 (breast) cancer cell line and scratch area showed a dose-dependent efficacy. The successfully green-synthesized GZnO-NPs effectively induced cell death in the MDA-MB 231 cancer cell line. The scratch assay results confirmed that prepared GZnO-NPs inhibited the proliferation and migration of cancerous cells.

Biopolymer collagen-chitosan scaffold containing Aloe vera for chondrogenic efficacy on cartilage tissue engineering.

The chondrogenic efficacy of aloe vera blended collagen-chitosan (COL-CS-AV) porous scaffold was investigated using articular chondrocytes in a standard condition. Cytocompatibility was analyzed using fluorescent dyes (calcein AM/ethidium bromide) and the viable cells were quantified by MTT assay. Glycosaminoglycan (GAG) content of ECM was estimated by using 1, 9-Dimethyl methylene Blue (DMMB). The total RNA content was quantified and the cartilage specific genes (col2a1, Acan) were amplified by reverse transcription-PCR from the cell lysate of the scaffolds. Histological examination was made using Haematoxylin and Eosin (H&E), safranin-O, masson's trichrome, alcian blue, and alizarin red to stain the specific component of ECM secreted on the construct. The cartilage specific collagen type II was estimated by immunohistochemistry using monoclonal type II collagen antibody. The results of these studies proved that COL-CS-AV scaffold has more chondrogenic efficacy than COL-CS, thus the aloe vera blend COL-CS-AV scaffold might be used as suitable candidate for cartilage tissue engineering.

Targeted Drug Administration onto Cancer Cells Using Hyaluronic Acid-Quercetin-Conjugated Silver Nanoparticles.

Quercetin (QtN) displays low systemic bioavailability caused by poor water solubility and instability. Consequently, it exerts limited anticancer action in vivo. One solution to increase the anticancer efficacy of QtN is the use of appropriate functionalized nanocarriers that preferentially target and deliver the drug to the tumor location. Herein, a direct advanced method was designed to develop water-soluble hyaluronic acid (HA)-QtN-conjugated silver nanoparticles (AgNPs). HA-QtN reduced silver nitrate (AgNO3) while acting as a stabilizing agent to produce AgNPs. Further, HA-QtN#AgNPs served as an anchor for folate/folic acid (FA) conjugated with polyethylene glycol (PEG). The resulting PEG-FA-HA-QtN#AgNPs (further abbreviated as PF/HA-QtN#AgNPs) were characterized both in vitro and ex vivo. Physical characterizations included UV-visible (UV-Vis) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), particle size (PS) and zeta potential (ZP) measurements, and biopharmaceutical evaluations. The biopharmaceutical evaluations included analyses of the cytotoxic effects on the HeLa and Caco-2 cancer cell lines using the MTT assay; cellular drug intake into cancer cells using flow cytometry and confocal microscopy; and blood compatibility using an automatic hematology analyzer, a diode array spectrophotometer, and an enzyme-linked immunosorbent assay (ELISA). The prepared hybrid delivery nanosystem was hemocompatible and more oncocytotoxic than the free, pure QtN. Therefore, PF/HA-QtN#AgNPs represent a smart nano-based drug delivery system (NDDS) and could be a promising oncotherapeutic option if the data are validated in vivo.

5-Fluorouracil-Loaded PLGA Nanoparticles: Formulation, Physicochemical Characterisation, and In VitroAnti-Cancer Activity.

The major goal of this investigation was to prepare a drug delivery of polymeric nanoparticles (NPs) from 5-fluorouracil (FU) that could be delivered intravenously and improve the therapeutic index of the FU. In order to achieve this, interfacial deposition method was used to prepare FU entrapped poly-(lactic-co-glycolic acid) nanoparticles (FU-PLGA-NPs). The influence of various experimental settings on the effectiveness of FU integration into the NPs was assessed. Our findings show that the technique used to prepare the organic phase and the ratio of the organic phase to the aqueous phase had the greatest impact on the effectiveness of FU integration into NPs. The results show that the preparation process produced spherical, homogenous, negatively charged particles with a nanometric size of 200 nm that are acceptable for intravenous delivery. A quick initial release over 24 h and then slow and steady release of FU from the formed NPs, exhibiting a biphasic pattern. Through the human small cell lung cancer cell line (NCI-H69), the in vitro anti-cancer potential of the FU-PLGA-NPs was evaluated. It was then associated to the in vitro anti-cancer potential of the marketed formulation Fluracil®. Investigations were also conducted into Cremophor-EL (Cre-EL) potential activity on live cells. The viability of NCI-H69 cells was drastically reduced when they were exposed to 50 µg·mL-1 Fluracil®. Our findings show that the integration of FU in NPs significantly increases the drug cytotoxic effect in comparison to Fluracil®, with this potential effect being particularly important for extended incubation durations.

Design, Physical Characterizations, and Biocompatibility of Cationic Solid Lipid Nanoparticles in HCT-116 and 16-HBE Cells: A Preliminary Study.

In this study, pEGFP-LUC was used as a model plasmid and three distinct cationic lipids (dioleyloxy-propyl-trimethylammonium chloride [DOTMA], dioleoyl trimethylammonium propane [DOTAP], and cetylpyridinium chloride [CPC]) were tested along with PEG 5000, as a nonionic surfactant, to prepare glyceryl monostearate (GMS)-based cationic solid lipid nanoparticles (cSLNs). Both the type and quantity of surfactant had an impact on the physicochemical characteristics of the cSLNs. Thermal analysis of the greater part of the endothermic peaks of the cSLNs revealed they were noticeably different from the individual pure compounds based on their zeta potential (ZP ranging from +17 to +56 mV) and particle size (PS ranging from 185 to 244 nm). The addition of cationic surfactants was required to produce nanoparticles (NPs) with a positive surface charge. This suggested that the surfactants and extensive entanglement of the lipid matrix GMS provided support for the behavioral diversity of the cSLNs and their capacity to interface with the plasmid DNA. Additionally, hemolytic assays were used to show that the cSLNs were biocompatible with the human colon cancer HCT-116 and human bronchial epithelial 16-HBE cell lines. The DOTMA 6-based cSLN was selected as the lead cSLN for further ex vivo and in vivo investigations. Taken together, these new findings might provide some guidance in selecting surfactants to prepare extremely efficient and non-toxic cSLN-based therapeutic delivery systems (e.g., gene therapy).

Ameliorated Stomach Specific Floating Microspheres for Emerging Health Pathologies Using Polymeric Konjac Glucomannan-Based Domperidone.

The goal of this study was to use polymeric konjac glucomannan (KGM), Kollidon VA 64 (KVA64), and glutaraldehyde to ameliorate stomach specific floating microspheres (SSFM) using domperidone (DoN) to increase in vivo bioavailability and emerging health pathologies. The SSFM were made using the emulsion cross-linking process, and the polymer was chosen based on its ability to get cross-linked. The thermodynamic parameters were used to determine the AL classes of phase solubility curves using ideal complexes produced with KVA64. The optimal interaction constants at 25 and 37°C were found to be 116.14 and 128.05 M-1, respectively. The prepared SSFM had an average particle size (PS) of 163.71 ± 2.26 mm and a drug content of 96.66 ± 0.32%. It can be determined from in vitro drug release experiments that drug release is good in terms of regulated drug release after 12 h (92.62 ± 2.43%). The SSFMs were approximately sphere-shaped and had smooth surfaces, according to the morphological data. SSFMs were investigated using Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), and differential scanning calorimetry (DSC), and no chemical structural changes were identified. The SSFMs produces a considerable gastric residence time with optimal DoN release and absorption in stomach fluid, and the mean residence time (17.36 ± 1.4 h) and t 1/2 (10.47 ± 0.6 h) were considerably longer (p < 0.05) than those obtained following i.v. treatment (MRT = 8.42 ± 1.2 h; t 1/2 = 9.07 ± 0.7 h). The SSFMs maintained good physical stability for three months when stored at room temperature.

An Ideal Approach for Enhancing 5-Fluorouracil Anticancer Efficacy by Nanoemulsion for Cytotoxicity against a Human Hepatoma Cell Line (HepG2 Cells).

The core objectives of the research were to prepare 5-fluorouracil nanoemulsion (FU-NE) and to evaluate the physiochemical properties and to study the in vitro antiproliferation in HepG2 cell lines. The physiochemical parameters determined were compatibility, particle size (PS), polydispersity index (PDI), zeta potential (ZP), density, surface tension (ST), pH, viscosity, in vitro release of FU, cytotoxicity, and apoptosis study. The prepared FU-NE3 was stable, sterile, and homogeneous. On the HepG2 (120 µg.mL-1) cells, in vitro cytotoxicity was obtained at IC50 concentration. Apoptosis examination by AO/EBand Hoechst staining shows that the majority of cell demise was caused by apoptosis, with a tiny fraction of necrosis. Hence, this investigation concluded that the developed FU-NE has now desirable characteristics for drug delivery to the cancer cell and may be screened for the in vivo colorectal anticancer activity.

The Unique Carboxymethyl Fenugreek Gum Gel Loaded Itraconazole Self-Emulsifying Nanovesicles for Topical Onychomycosis Treatment.

The novel itraconazole (ITZ) nail penetration enhancing self-emulsifying nanovesicles (ITZ-nPEVs) loaded in carboxymethyl fenugreek gum (CMFG) gel circumvent the systemic onychomycosis treatment. The ITZ-nPEVs were prepared by the thin film hydration technique, and the particle size (PS), zeta potential (ZP), drug content (DC), entrapment efficiency (% EE), deformity index (DI), viscosity, morphology, and physical stability of the ITZ-nPEVs were measured. In terms of nail hydration, transungual drug absorption, and antifungal efficacy against Candida albicans, the chosen ITZ-nPEVs, nPEV-loaded CMFG (CMFG-ITZ-nPEVs) gel, and the commercialized Itrostred gel were compared. The ITZ-nPEVs showed spherical structure with high DC, % EE, low PS and PDI and positive ZP of ITZ ranging from 95.36 to 93.89 mg/5 mL and 95.36-96.94%, 196.55-252.5 nm, 0.092-0.49, and +11.1 to +22.5 mV, respectively. Compared to the Itrostred gel, the novel ITZ-nPEVs exhibited hydration enhancement factor for 24 h (HE24) of 1.53 and 1.39 drug uptake enhancement factor into nail clippings. Moreover, zone of inhibitions for ITZ-nPEVs (27.0 ± 0.25 mm) and CMFG-ITZ-nPEVs (33.2 ± 0.09 mm) against Candida albicans were significantly greater than that of Itrostred gel (22.9 ± 0.44 mm). For clinical investigation on onychomycotic patients, a nail penetration enhancer containing ITZ-nPEV-loaded CMFG gel presents a highly promising approach.

Preparation of Soluble Complex of Curcumin for the Potential Antagonistic Effects on Human Colorectal Adenocarcinoma Cells.

This study was designed to investigate the effects of curcumin (CMN) soluble complex (SC) prepared by melt casting (HM) and hot-melt extrusion (HME) technology. Phase solubility (PS) study, in silico molecular modeling, aqueous solubility, drug release, and physicochemical investigation including a novel dyeing test was performed to obtain an optimized complex by a central composite design (CCD). The results show that the HME-SC produces better improvements towards solubility (0.852 ± 0.02), dissolution (91.87 ± 0.21% at 30 min), with an ideal stability constant (309 and 377 M-1 at 25 and 37 °C, respectively) and exhibits AL type of isotherm indicating 1:1 stoichiometry. Intermolecular hydrogen bonding involves the formation of SC, which does not undergo any chemical modification, followed by the complete conversion of the amorphous form which was identified by XRD. The in vitro cytotoxicity showed that IC50 was achieved in the SW480 (72 µM.mL-1) and Caco-2 (40 µM.mL-1) cells while that of pure CMN ranged from 146 to 116 µM/mL-1. Apoptosis studies showed that cell death is primarily due to apoptosis, with a low rate of necrosis. In vivo toxicity, confirmed by the zebrafish model, exhibited the safety of the HME-SC. In conclusion, the HME-SC potentially enhances the solubility and cytotoxicity to the treatment of colorectal cancer (CRC).

Human Hair Keratin Composite Scaffold: Characterisation and Biocompatibility Study on NIH 3T3 Fibroblast Cells.

The aim of this study was to transform human hair keratin waste into a scaffold for soft tissue engineering to heal wounds. The keratin was extracted using the Shindai method. Keratin and polyvinyl alcohol (PVA) was cross-linked with alginate dialdehyde and converted into a scaffold by the freeze-drying method using gentamycin sulphate (GS) as a model drug. The scaffold was subjected to Fourier transform infrared spectra (FTIR), swelling index, porosity, water absorption, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), X-ray diffraction (XRD), drug release, and cell viability (MTT) analysis. The scaffold was tested for keratinocyte growth using the murine fibroblast cell line (NIH 3T3 cells). The outcome from the keratin had a molecular weight band between 52-38 kDa in SDS-PAGE (Sodium dodecylsulfate-Polyacrylamide gel electrophoresis). A porous scaffold was capable of water absorption (73.64 ± 14.29%), swelling ability (68.93 ± 1.33%), and the release of GS shown as 97.45 ± 4.57 and 93.86 ± 5.22 of 1:4 and 1:3 scaffolds at 16 h. The physicochemical evaluation revealed that the prepared scaffold exhibits the proper structural integrity: partially crystalline with a strong thermal property. The scaffold demonstrated better cell viability against the murine fibroblast cell line (NIH 3T3 cells). In conclusion, we found that the prepared composite scaffold (1:4) can be used for wound healing applications.

Superfast Synthesis of Stabilized Silver Nanoparticles Using Aqueous Allium sativum (Garlic) Extract and Isoniazid Hydrazide Conjugates: Molecular Docking and In-Vitro Characterizations.

Green synthesis of silver nanoparticles (AgNPs) was synthesized from fresh garlic extract coupled with isoniazid hydrazide (INH), a commonly used antibiotic to treat tuberculosis. A molecular docking study conducted with the selected compounds compared with anthranilate phosphoribosyltransferase (trpD) from Mycobacterium tuberculosis. The aqueous extract of garlic was prepared and mixed with silver nitrate (AgNO3) solution for the superfast synthesis of stable AgNPs. INH was then conjugated with AgNPs at different ratios (v/v) to obtain stable INH-AgNPs conjugates (AgNCs). The resulting AgNCs characterized by FTIR spectra revealed the ultrafast formation of AgNPs (<5 s) and perfectly conjugated with INH. The shifting of λmax to longer wavelength, as found from UV spectral analysis, confirmed the formation of AgNCs, among which ideal formulations (F7, F10, and F13) have been pre-selected. The zeta particle size (PS) and the zeta potential (ZP) of AgNPs were found to be 145.3 ± 2.1 nm and -33.1 mV, respectively. These data were significantly different compared to that of AgNCs (160 ± 2.7 nm and -14.4 mV for F7; 208.9 ± 2.9 nm and -19.8 mV for F10; and 281.3 ± 3.6 nm and -19.5 mV for F13), most probably due to INH conjugation. The results of XRD, SEM and EDX confirmed the formation of AgNCs. From UV spectral analysis, EE of INH as 51.6 ± 5.21, 53.6 ± 6.88, and 70.01 ± 7.11 %, for F7, F10, and F13, respectively. The stability of the three formulations was confirmed in various physiological conditions. Drug was released in a sustainable fashion. Besides, from the preferred 23 compounds, five compounds namely Sativoside R2, Degalactotigonin, Proto-desgalactotigonin, Eruboside B and Sativoside R1 showed a better docking score than trpD, and therefore may help in promoting anti-tubercular activity.

Stoichiometrically Governed Curcumin Solid Dispersion and Its Cytotoxic Evaluation on Colorectal Adenocarcinoma Cells.

BACKGROUND: Colorectal cancer (CRC) is the third most commonly occurring cancer in men and the second most commonly occurring cancer in women. Curcumin (CMN) is obtained from a natural source and has no toxicity, even at high doses (8,000 mg/kg body weight in 24 hours) and was determined to have anticancer potency on several kinds of carcinoma. However, its medical applications were limited because of its low solubility and poor bioavailability. MATERIALS AND METHODS: To improve the medical applications of CMN, various hydrophilic carriers such as poloxamer 407 (PMX-407), poloxamer 188 (PMX-188), Gelucire 50/13 (Gel-50/13), and mannitol (MNL) were used to prepare a binary complex solid dispersion (SD). These binary SDs were characterized for aqueous solubility in various solvents. Physical stability, thermal behaviors, and morphology were determined by Fourier transform infrared spectrophotometric analysis, powder X-ray diffraction analysis, thermogravimetric analysis, differential scanning calorimetric analysis, scanning electron microscopy, dynamic light scattering study, and the novel dyeing test. In vitro drug release was determined by dissolution study. Based on the characterization, the better SD complex was optimized using Box-Behnken design (BBD). The cytotoxicity and apoptosis study of prepared CMN (C-SD) were used to test for colorectal adenocarcinoma cell lines. RESULTS: These results showed that the solubility of CMN is greatly improved after complexation with PXM-407 in SD. CMN is practically insoluble in water at acidic and neutral pH; however, the SD of CMN with PXM-407 produced significant improvement in solubility (1.266±0.0242 mg/mL) and dissolution (91.36±0.431% at 30 minutes); similarly, these data fit with a phase solubility study and in silico molecular modeling. Moreover, the solid-state characterization revealed that the SD complex exhibits the intermolecular hydrogen bond with drug and carrier. Also, the complex does not undergo any chemical modification owing to the amorphous form, and the dye test showed better coloring impact indicating the solubility of CMN. The cell cycle arrest confirmed at G2/M phase from flow cytometry analysis, and Western blot investigation was recognized molecular level cell death and the complex induced more exploit DNA during apoptosis. CONCLUSION: This study confirmed that the ideal stoichiometric ratio of CMN with carrier to enhance its solubility was 1:1. This molecular complex of PXM-407 was found to be more effective against colorectal cancer (CRC) than pure CMN.