Spectrophotometric determination of fenoprofen calcium drug in pure and pharmaceutical preparations. Spectroscopic characterization of the charge transfer solid complexes.

Simple, accurate and robust spectrophotometric method was developed for determination of fenoprofen calcium drug (FPC). The proposed method was based on the charge transfer (CT) reaction of FPC drug (as n-electron donor) with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), 2,4,6-trinitrophenol (picric acid, PA) or 1,2,5,8-tetrahydroxyanthraquinone (Quinalizarin, QZ) (as π-acceptors) to give highly colored charge transfer complexes. Different variables affecting the reaction such as reagent concentration, temperature and time have been carefully optimized to achieve the highest sensitivity. Beer's law was obeyed over the concentration ranges of 2-60, 0.6-90 and 4-30µgmL-1 using DDQ, PA and QZ CT reagents, respectively, with correlation coefficients of 0.9986, 0.9989 and 0.997 and detection limits of 1.78, 0.48 and 2.6µgmL-1 for the CT reagents in the same order. Elucidation of the chemical structure of the solid CT complexes formed via reaction between the drug under study and π-acceptors was done using elemental, thermal analyses, IR, 1H NMR and mass spectrometry. X-ray diffraction was used to estimate the crystallinity of the CT complexes. Their biological activities were screened against different bacterial and fungal organisms. The method was applied successfully with satisfactory results for the determination of FPC drug in fenoprofen capsules. The method was validated with respect to linearity, limit of detection and quantification, inter- and intra-days precision and accuracy. The proposed method gave comparable results with the official method.

A newly validated and characterized spectrophotometric method for determination of a three water pollutants metal ions.

A simple, fast and accurate spectrophotometric method had been developed to determine lead (II), chromium (III) and barium (II) ions in pure forms and in spiked water samples using thoron (THO) as a reagent forming colored complexes. It was found that the formed complexes absorbed maximally at 539, 540 and 538nm for Pb(II)-THO, Cr(III)-THO and Ba(II)-THO complexes, respectively. The optimum experimental conditions for these complexes had been studied carefully. Beer's law was obeyed in the range 1-35, 1-70, and 1-45µgmL-1 for Pb (II), Cr(III) and Ba(II) ions with THO reagent, respectively. Different parameters such as linearity, selectivity, recovery, limits of quantification and detection, precision and accuracy were also evaluated in order to validate the proposed method. The results showed that, THO was effective in simultaneous determination of Pb(II), Cr(III) and Ba(III) ions in pure forms and in spiked water samples. Also, the results of the proposed method were compared with that obtained from atomic absorption spectrometry. The isolated solid complexes had been characterized using elemental analysis, X-ray powder diffraction (XRD), IR, mass spectrometry and TD-DFT calculations. Their biological activities were investigated against different types of bacteria and fungi organisms.

Construction and performance characterization of screen printed and carbon paste ion selective electrodes for potentiometric determination of naphazoline hydrochloride in pharmaceutical preparations.

This paper describes the development of screen-printed (SPE) and carbon paste (CPE) sensors for the rapid and sensitive quantification of naphazoline hydrochloride (NPZ) in pharmaceutical formulations. This work compares the electroactivity of conventional carbon paste and screen-printed carbon paste electrodes towards potentiometric titration of NPZ. The repeatability and accuracy of measurements performed in the analysis of these pharmaceutical matrices using new screen printed sensors were evaluated. The influence of the electrode composition, conditioning time of the electrode and pH of the test solution, on the electrode performance were investigated. The drug electrode showed Nernstain responses in the concentration range from 1 × 10(-6) to 1 × 10(-2) mol L(-1) with slopes of 57.5 ± 1.3 and 55.9 ± 1.6 mV per decade for SPE and CPE, respectively, and was found to be very precise and usable within the pH range 3-8. These sensors exhibited a fast response time (about 3 s for both SPE and CPE, respectively), a low detection limit (3.5 × 10(-6) and 1.5 × 10(-6) M for SPE and CPE, respectively), a long lifetime (3 and 2 months for SPE and CPE, respectively) and good stability. The selectivity of the electrode toward a large number of inorganic cations, sugars and amino acids was tested. It was applied to potentiometric determination of NPZ in pure state and pharmaceutical preparation under batch conditions. The percentage recovery values for the assay of NPZ in tablets (relative standard deviations ≤0.3% for n = 4) were compared well with those obtained by the official method.