Seroprevalence of Toxoplasma gondii and Neospora spp. in horse population of Tehran, Iran.

Neospora spp. and Toxoplasma gondii are two closely related protozoan parasites that are widely distributed throughout the world. Horses can act as intermediate hosts for both parasites and can acquire disease. Blood samples were taken from 487 clinically healthy horses from 17 different mechanized stables in Tehran, the capital of Iran, during September and November of 2022. IFAT and ELISA were employed to detect antibodies directed against Neospora spp. and T. gondii. The anti-N. caninum antibodies were detected in 52 of the horses (10.67%) based on IFAT and in 86 of the 487 horses (17.65%) based on the ELISA test. Also, antibodies against T. gondii were detected in 41 horses (8.42%) based on IFAT and in 63 of 487 horses (12.94%) based on the ELISA test. Also, in 6 of the horses (1.23%) based on IFAT and in 13 of the 487 horses (2.67%) based on the ELISA test, double positivity suggested co-infection with both parasites. Gender, age groups, and the presence of dogs for neosporosis, and age groups and the presence of cats for toxoplasmosis, could be considered factors having an influence on the seroprevalences (P < 0.05). The results proved the importance of the urgent implementation of stringent regulatory measures to prevent and control the spread of these parasites.

Preparation, Physicochemical Characterization and Anti-Fungal Evaluation of Amphotericin B-Loaded PLGA-PEG-Galactosamine Nanoparticles.

Purpose: The present study aimed to formulate PLGA and PLGA-PEG-galactosamine nanoparticles (NPs) loaded with amphotericin B with appropriate physicochemical properties and antifungal activity. PLGA was functionalized with GalN to increase the adhesion and antifungal activity of NPs against Candida albicans. Methods: The physicochemical properties of NPs were characterized by particle size determination, zeta potential, drug crystallinity, loading efficiency, dissolution studies, differential scanning calorimeter (DSC), X-ray powder diffraction (XRPD), and Fourier transform infrared (FT-IR). Antifungal activity of the NPs at different drug/polymer ratios was examined by determining minimum inhibitory concentrations (MICs). Results: the FT-IR and 1 HNMR analysis successfully confirmed the formation of PLGA- PEG-GalN NPs. The PLGA NPs were in the size range of 174.1 ± 3.49 to 238.2±7.59 nm while PLGA-GalN NPs were 255.6 ±4.08 nm in size , respectively. Loading efficiency was in the range of 67%±2.4 to 77%±1.6, and entrapment efficiency in the range of 68.185%±1.9 to 73.05%±0.6. Zeta potential and loading efficiency for PLGA-GalN NPs were -0.456, 71%. The NPs indicated an amorphous status according to XRPD patterns and DSC thermograms. The PLGA-PEG-GalN NPs showed higher fungistatic activity than PLGA NPs. Conclusion: the results demonstrated that the antifungal activity of PLGA-PEG-GalN NPs was higher than pure amphotericin B and PLGA NPs.

Preparation and Evaluation of Eudragit® L100 Nanoparticles Loaded Impregnated with KT Tromethamine Loaded PVA -HEC Insertions for Ophthalmic Drug Delivery.

Purpose: The purpose of the present study was to improve the ocular delivery for ketorolac tromethamine (KT) used to treat inflammation of the eye. Methods: Eudragit nanoparticles loaded with KT were prepared and incorporated in polyvinyl alcohol (PVA) and hydroxyethyl cellulose (HEC) films. Nanoparticles were characterized by Fourier transform-infrared (FT-IR), scanning electron microscopy (SEM). Physicochemical properties and encapsulation effciency were investigated for nanoparticles. Also, the inserts were evaluated for their physiochemical parameters like percentage moisture absorption, percentage moisture loss, thickness and folding endurance. Results: Mean particle size and zeta potential were in range of 153.8-217 nm and (-10.8) - (-40.7) mV, respectively. The results show that the use of a surfactant has not led to any major change on drug loading. The loading increases with the amount of polymer. The insert had a thickness varying from 0.072 ± 0.0098 to 0.0865 ± 0.0035 mm. The thicknesses of the inserts and the folding endurance increased with the total polymer concentration. The physicochemical properties showed that the Eudragit® L-100 nanoparticles loaded PVA-HEC films could be an effective carrier for KT. Conclusion: For the first time, inserts of Eudragit nanoparticles were successfully prepared for ophthalmic drug delivery system to prevent frequent drug administration and enhance patient compliance.

Formulation and Physicochemical Characterization of Cyclosporine Microfiber by Electrospinning.

Purpose: The objective of this study was to improve the permeability and water solubility rate of a poor water soluble drug, cyclosporine A (CsA). Methods: In order to improve the drug dissolution rate and oral bioavailability, electrospinning method was used as an approach to prepare. The fibers were evaluated for surface morphology, thermal characterizations, drug crystallinity, in vitro drug release and in vivo bioavailability studies. Results: Scanning electron microscope (SEM) results confirmed that the fibers were in microsize range and the size of the fibers was in the rang of 0.2 to 2 micron. Differential scanning calorimetry (DSC) and powder X-ray diffractometry (XRPD) analysis ensured that the crystalline lattice of drug were weakened or destroyed in the fibers. The drug release was 15.28%, 20.67%, and 32.84% from pure drug, fibers of formulation B, and formulation A, respectively. In vivo study results indicated that the bioavailability parameters of the optimized fiber formulation were improved and the maximum concentration (Cmax) were significantly higher for fibers (3001 ng/mL) than for pure drug (2550 ng/mL). The dissolution rate of the formulations was dependent on the nature and ratio of drug to carriers. Conclusion: The physicochemical properties showed that the optimized mixture of polyethylene glycol (PEG) and povidone (PVP) fibers could be an effective carrier for CsA delivery. PEG and PVP fibers improved the absolute bioavailability and drug dissolution rate with appropriate physicochemical properties.

Preparation and physicochemical characterization of prazosin conjugated PLGA nanoparticles for drug delivery of flutamide

In the current work, a sustained drug delivery system of flutamide (FLT) was developed using Poly(D,L-lactide-co-glycolide) (PLGA) decorated bypoly(ethylene glycol) (PEG) grafted prazosin (PLGA-PEG-Praz) as a targeting moiety. In a multi-step reaction, PLGA was linked to PEG and prazosin. The structure of the synthesized polymers was confirmed by FTIR and 1H-NMR. Flutamide-loaded nanoparticles were prepared by quasi-emulsion solvent diffusion technique. The nanoparticles were evaluated for size, zeta potential, polydispersity index, drug crystallinity, loading efficiency, and release properties. Also, the physicochemical properties of the nanoparticles were analyzed using Scanning Electron Microscopy (SEM), Differential Scanning Calorimetry, and Powder X-Ray Diffractometry (XRD). The particle size of nanoparticles was ranged between 191 and 249 nm. Loading efficiency of nanoparticles was about 43%-69%. Results showed a steady release rate for nanoparticles compared to that of a pure drug powder. SEM characterization confirmed that particles were in nanosize range. DSC and XRPD results verified a decrease in drug crystallinity in the prepared formulations. In conclusion, the results of this study showed that PLGA-PEG-Praz nanoparticles could be a good choice to improve the physicochemical properties of the drug and these formulations can increase Flutamide efficacy.

Preparation, Physicochemical Characterization and Anti-fungal Evaluation of Nystatin-Loaded PLGA-Glucosamine Nanoparticles.

PURPOSE: Nystatin loaded PLGA and PLGA-Glucosamine nanoparticles were formulated. PLGA were functionalized with Glucosamine (PLGA-GlcN) to enhance the adhesion of nanoparticles to Candida Albicans (C.albicans) cell walls. METHOD: Quasi-emulsion solvent diffusion method was employed using PLGA and PLGA-GlcN with various drug-polymer ratios for the preparation of nanoparticles. The nanoparticles were evaluated for size, zeta potential, polydispersity index, drug crystallinity, loading efficiency and release properties. DSC, SEM, XRPD, 1H-NMR, and FT-IR were performed to analyze the physicochemical properties of the nanoparticles. Antifungal activity of the nanoparticles was evaluated by determination of MICs against C.albicans. RESULTS: The spectra of 1H-NMR and FT-IR analysis ensured GlcN functionalization on PLGA nanoparticles. SEM characterization confirmed that particles were in the nanosize range and the particle size for PLGA and PLGA-GlcN nanoparticles were in the range of 108.63 ± 4.5 to 168.8 ± 5.65 nm and 208.76 ± 16.85 nm, respectively. DSC and XRPD analysis ensured reduction of the drug crystallinity in the nanoparticles. PLGA-GlcN nanoparticles exhibit higher antifungal activity than PLGA nanoparticles. CONCLUSION: PLGA-GlcN nanoparticles showed more antifungal activity with appropriate physicochemical properties than pure Nystatin and PLGA nanoparticles.