Evaluation of Mg[B(HFIP)4]2-Based Electrolyte Solutions for Rechargeable Mg Batteries.

One of the greatest challenges toward rechargeable magnesium batteries is the development of noncorrosive electrolyte solutions with high anodic stability that can support reversible Mg deposition/dissolution. In the last few years, magnesium electrolyte solutions based on Cl-free fluorinated alkoxyborates were investigated for Mg batteries due to their high anodic stability and ionic conductivity and the possibility of reversible deposition/dissolution in ethereal solvents. Here, the electrochemical performance of Mg[B(hexafluoroisopropanol)4]2/dimethoxyethane (Mg[B(HFIP)4]2/DME) solutions was examined. These electrolyte solutions require a special "conditioning" pretreatment that removes undesirable active moieties. Such a process was developed and explored, and basic scientific issues related to the mechanism by which it affects Mg deposition/dissolution were addressed. The chemical changes that occur during the conditioning process were examined. Mg[B(HFIP)4]2/DME solutions were found to enable reversible Mg deposition, albeit with a relatively low Coulombic efficiency of 95% during the first cycles. Prolonged deposition/dissolution cycling tests demonstrate a stable behavior of magnesium electrodes. Overall, this system presents a reasonable electrolyte solution and can serve as a basis for future efforts to develop chlorine-free alternatives for secondary magnesium batteries. It is clear that such a conditioning process is mandatory, as it removes reactive contaminants that lead to unavoidable passivation and deactivation of Mg electrodes from the solution.

Oxacycle-Fused [1]Benzothieno[3,2-b][1]benzothiophene Derivatives: Synthesis, Electronic Structure, Electrochemical Properties, Ionisation Potential, and Crystal Structure.

The molecular properties of [1]benzothieno[3,2-b][1]benzothiophene (BTBT) are vulnerable to structural modifications, which in turn are determined by the functionalization of the backbone. Hence versatile synthetic strategies are needed to discover the properties of this molecule. To address this, we have attempted heteroatom (oxygen) functionalization of BTBT by a concise and easily scalable synthesis. Fourfold hydroxy-substituted BTBT is the key intermediate, from which the compounds 2,3,7,8-bis(ethylenedioxy)-[1]benzothieno[3,2-b][1]benzothiophene and 2,3,7,8-bis(methylenedioxy)-[1]benzothieno[3,2-b][1]benzothiophene are synthesized. The difference in ether functionalities on the BTBT scaffold influences the ionisation potential values substantially. The crystal structure reveals the transformation of the herringbone motif in bare BTBT towards π-stacked columns in the newly synthesized derivatives. The results are further justified by the simulated HOMO levels of the model compound.

Heteroleptic Copper(I) Complexes Prepared from Phenanthroline and Bis-Phosphine Ligands: Rationalization of the Photophysical and Electrochemical Properties.

The electronic and structural properties of ten heteroleptic [Cu(NN)(PP)]+ complexes have been investigated. NN indicates 1,10-phenanthroline (phen) or 4,7-diphenyl-1,10-phenanthroline (Bphen); each of these ligands is combined with five PP bis-phosphine chelators, i.e., bis(diphenylphosphino)methane (dppm), 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp), 1,2-bis(diphenylphosphino)benzene (dppb), and bis[(2-diphenylphosphino)phenyl] ether (POP). All complexes are mononuclear, apart from those based on dppm, which are dinuclear. Experimental data-also taken from the literature and including electrochemical properties, X-ray crystal structures, UV-vis absorption spectra in CH2Cl2, luminescence spectra and lifetimes in solution, in PMMA, and as powders-have been rationalized with the support of density functional theory calculations. Temperature dependent studies (78-358 K) have been performed for selected complexes to assess thermally activated delayed fluorescence. The main findings are (i) dependence of the ground-state geometry on the crystallization conditions, with the same complex often yielding different crystal structures; (ii) simple model compounds with imposed C2 v symmetry ([Cu(phen)(PX3)2]+; X = H or CH3) are capable of modeling structural parameters as a function of the P-Cu-P bite angle, which plays a key role in dictating the overall structure of [Cu(NN)(PP)]+ complexes; (iii) as the P-Cu-P angle increases, the energy of the metal-to-ligand charge transfer absorption bands linearly increases; (iv) the former correlation does not hold for emission spectra, which are red-shifted for the weaker luminophores; (v) the larger the number of intramolecular π-interactions within the complex in the ground state, the higher the luminescence quantum yield, underpinning a geometry locking effect that limits the structural flattening of the excited state. This work provides a general framework to rationalize the structure-property relationships of [Cu(NN)(PP)]+, a class of compounds of increasing relevance for electroluminescent devices, photoredox catalysis, and solar-to-fuels conversion, which so far have been investigated in an unsystematic fashion, eluding a comprehensive understanding.

Heteroleptic Copper(I) Pseudorotaxanes Incorporating Macrocyclic Phenanthroline Ligands of Different Sizes.

A series of copper(I) pseudorotaxanes has been prepared from bis[2-(diphenylphosphino)phenyl] ether (POP) and macrocyclic phenanthroline ligands with different ring sizes (m30, m37, and m42). Variable-temperature studies carried out on the resulting [Cu(mXX)(POP)]+ (mXX = m30, m37, and m42) derivatives have revealed a dynamic conformational equilibrium due to the folding of the macrocyclic ligand. The absorption and luminescence properties of the pseudorotaxanes have been investigated in CH2Cl2. They exhibit metal-to-ligand charge-transfer emission with photoluminescence quantum yields (PLQYs) in the range 20-30%. The smallest system [Cu(m30)(POP)]+ shows minimal differences in spectral shape and position compared to its analogues, suggesting a slightly distorted coordination environment. PLQY is substantially enhanced in poly(methyl methacrylate) films (∼40-45%). The study of emission spectra and excited-state lifetimes in powder samples as a function of temperature (78-338 K) reveals thermally activated delayed fluorescence, with sizable differences in the singlet-triplet energy gap compared to the reference compound [Cu(dmp)(POP)]+ (dmp = 2,9-dimethyl-1,10-phenanthroline) and within the pseudorotaxane series. The system with the largest ring ([Cu(m42)(POP)]+) has been tested as emissive material in OLEDs and affords bright green devices with higher luminance and greater stability compared to [Cu(dmp)(POP)]+, which lacks the macrocyclic ring. This highlights the importance of structural factors in the stability of electroluminescent devices based on Cu(I) materials.

Combining topological and steric constraints for the preparation of heteroleptic copper(I) complexes.

Heteroleptic copper(I) complexes have been prepared from a macrocyclic ligand incorporating a 2,9-diphenyl-1,10-phenanthroline subunit (M30) and two bis-phosphines, namely bis[(2-diphenylphosphino)phenyl] ether (POP) and 1,3-bis(diphenylphosphino)propane (dppp). In both cases, the diphenylphosphino moieties of the PP ligand are too bulky to pass through the 30-membered ring of M30 during the coordination process, hence the formation of C2v-symmetrical pseudo-rotaxanes is prevented. When POP is used, X-ray crystal structure analysis shows the formation of a highly distorted [Cu(M30)(POP)](+) complex in which the POP ligand is only partially threaded through the M30 unit. This compound is poorly stable as the Cu(I) cation is not in a favorable coordination environment due to steric constraints. By contrast, in the case of dppp, the bis-phosphine ligand undergoes both steric and topological constraints and adopts a nonchelating coordination mode to generate [Cu2(M30)2(µ-dppp)](BF4)2. This compound exhibits metal-to-ligand charge transfer (MLCT) emission characterized by a very large Stokes' shift (≈200 nm) that is not attributed to a dramatic structural distortion between the ground and the emitting states but to very weak MLCT absorption transitions at longer wavelengths. Accordingly, [Cu2(M30)2(µ-dppp)](BF4)2 shows unusually high luminescence quantum yields for Cu(I) complexes, both in solution and in the solid state (0.5 and 7 %, respectively).

Heteroleptic copper(I) complexes prepared from phenanthroline and bis-phosphine ligands.

Preparation of [Cu(NN)(PP)](+) derivatives has been systematically investigated starting from two libraries of phenanthroline (NN) derivatives and bis-phosphine (PP) ligands, namely, (A) 1,10-phenanthroline (phen), neocuproine (2,9-dimethyl-1,10-phenanthroline, dmp), bathophenanthroline (4,7-diphenyl-1,10-phenanthroline, Bphen), 2,9-diphenethyl-1,10-phenanthroline (dpep), and 2,9-diphenyl-1,10-phenanthroline (dpp); (B) bis(diphenylphosphino)methane (dppm), 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp), 1,2-bis(diphenylphosphino)benzene (dppb), 1,1'-bis(diphenylphosphino)ferrocene (dppFc), and bis[(2-diphenylphosphino)phenyl] ether (POP). Whatever the bis-phosphine ligand, stable heteroleptic [Cu(NN)(PP)](+) complexes are obtained from the 2,9-unsubstituted-1,10-phenanthroline ligands (phen and Bphen). By contrast, heteroleptic complexes obtained from dmp and dpep are stable in the solid state, but a dynamic ligand exchange reaction is systematically observed in solution, and the homoleptic/heteroleptic ratio is highly dependent on the bis-phosphine ligand. Detailed analysis revealed that the dynamic equilibrium resulting from ligand exchange reactions is mainly influenced by the relative thermodynamic stability of the different possible complexes. Finally, in the case of dpp, only homoleptic complexes were obtained whatever the bis-phosphine ligand. Obviously, steric effects resulting from the presence of the bulky phenyl rings on the dpp ligand destabilize the heteroleptic [Cu(NN)(PP)](+) complexes. In addition to the remarkable thermodynamic stability of [Cu(dpp)2]BF4, this negative steric effect drives the dynamic complexation scenario toward almost exclusive formation of homoleptic [Cu(NN)2](+) and [Cu(PP)2](+) complexes. This work provides the definitive rationalization of the stability of [Cu(NN)(PP)](+) complexes, marking the way for future developments in this field.

A stable and strongly luminescent dinuclear Cu(I) helical complex prepared from 2-diphenylphosphino-6-methylpyridine.

Treatment of 2-diphenylphosphino-6-methylpyridine (dpPyMe) with Cu(CH(3)CN)(4)BF(4) afforded the stable dinuclear Cu(I) complex [Cu(2)(µ-dpPyMe)(3)(CH(3)CN)](BF(4))(2). This compound is a weak emitter in solution, however a remarkably high emission quantum yield (46%) has been found in a rigid matrix at room temperature.

Dynamic topomerization of Cu(I)-complexed pseudorotaxanes.

Dynamic molecular motions resulting from the folding of a flexible macrocyclic component in a Cu(I)-complexed pseudorotaxane have been evidenced by variable temperature NMR experiments. The proposed conformational changes are also supported by the X-ray crystal structures of the compounds and computational studies.