ABSTRACT
Perovskite light-emitting diodes (LEDs) have reached external quantum efficiencies of over 20% for various colours, showing great potential for display and lighting applications. Despite the internal quantum efficiencies of the best-performing devices already approaching unity, around 80% of the internally generated photons are trapped in the devices and lose energy through a variety of lossy channels. Significant opportunities for improving efficiency and maximizing photon extraction lie in the effective management of light. In this Review we analyse light management strategies based on the intrinsic optical properties of the perovskite materials and the extrinsic properties related to device structures. These approaches should allow the external quantum efficiencies of perovskite LEDs to substantially exceed the conventional limits of planar organic LED devices. By revisiting lessons learned from organic LEDs and perovskite solar cells, we highlight possible directions of future research towards perovskite LEDs with ultrahigh efficiencies.
ABSTRACT
Blue organic light-emitting diodes require high triplet interlayer materials, which induce large energetic barriers at the interfaces resulting in high device voltages and reduced efficiencies. Here, we alleviate this issue by designing a low triplet energy hole transporting interlayer with high mobility, combined with an interface exciplex that confines excitons at the emissive layer/electron transporting material interface. As a result, blue thermally activated delay fluorescent organic light-emitting diodes with a below-bandgap turn-on voltage of 2.5 V and an external quantum efficiency (EQE) of 41.2% were successfully fabricated. These devices also showed suppressed efficiency roll-off maintaining an EQE of 34.8% at 1000 cd m-2. Our approach paves the way for further progress through exploring alternative device engineering approaches instead of only focusing on the demanding synthesis of organic compounds with complex structures.
ABSTRACT
This work reports on a reduced graphene oxide and poly(aniline) composite (rGO-PANI), with rGO clusters inserted between PANI chains. These clusters were formed due the plasticizing effect of N-methyl-2-pyrrolidone (NMP) solvent, which was added during the synthesis. Further, this composite was processed as thin film onto an interdigitated electrode array and used as the sensitive layer for ammonia gas, presenting sensitivity of 250% at 100 ppm, a response time of 97 s, and a lowest detection limit of 5 ppm. The PANI deprotonation process, upon exposure to NH3, rGO, also contributed by improving the sensitivity due its higher surface area and the presence of carboxylic acids. This allowed for the interaction between the hydrogen of NH3 (nucleophilic character) and the -COOH groups (electrophilic character) from the rGO surface, thereby introducing a promising sensing composite for amine-based gases.
Subject(s)
Graphite , Ammonia , Electrodes , GasesABSTRACT
Here we use triple-cation metal-organic halide perovskite single crystals for the transistor channel of a flash memory device. Moreover, we design and demonstrate a 10 nm thick single-layer nanofloating gate. It consists of a ternary blend of two organic semiconductors, a p-type polyfluorene and an n-type fullerene that form a donor:acceptor interpenetrating network that serves as the charge storage unit, and of an insulating polystyrene that acts as the tunneling dielectric. Under such a framework, we realize the first non-volatile flash memory transistor based on a perovskite channel. This simplified, solution-processed perovskite flash memory displays unique performance metrics such as a large memory window of 30 V, an on/off ratio of 9 × 107, short write/erase times of 50 ms, and a satisfactory retention time exceeding 106 s. The realization of the first flash memory transistor using a single-crystal perovskite channel could be a valuable direction for perovskite electronics research.
ABSTRACT
UNLABELLED: Perovskite solar cells are becoming one of the leading technologies to reduce our dependency on traditional power sources. However, the frequently used component poly(3,4-ethylenedioxythiophene) polystyrene sulfonate ( PEDOT: PSS) has several shortcomings, such as an easily corroded indium-tin-oxide (ITO) interface at elevated temperatures and induced electrical inhomogeneity. Herein, we propose solution-processed nitrogen-doped graphene oxide nanoribbons (NGONRs) as a hole transport layer (HTL) in perovskite solar cells, replacing the conducting polymer PEDOT: PSS. The conversion efficiency of NGONR-based perovskite solar cells has outperformed a control device constructed using PEDOT: PSS. Moreover, our proposed NGONR-based devices also demonstrate a negligible current hysteresis along with improved stability. This work provides an effective route for substituting PEDOT: PSS as the effective HTL.
ABSTRACT
The effects of UV-ozone (UVO) irradiation on copper-doped nickel acetate and its applicability to perovskite solar cells were investigated. UVO irradiation of copper-doped nickel acetate significantly increased the electrical conductivity (from 4.28 × 10(-4) S cm(-1) to 5.66 × 10(-2) S cm(-1)), which is due to the increased carrier concentration (from 3.53 × 10(13) cm(-3) to 2.41 × 10(16) cm(-3)), and the charge extraction efficiency was enhanced, leading to better compatibility with the hole transport layer. By UVO irradiation, the work function was increased from 4.95 eV to 5.33 eV by the surface dipole formation, which effectively reduced the interface barrier between the hole transport layer and the MAPbI3 light absorbing layer. UVO Irradiation of the underlying layer also allows the MAPbI3 precursors to form better morphology with highly arranged crystallinity. Compared to the cells using non-irradiated copper doped nickel acetate, UVO-irradiated copper-doped nickel acetate devices showed an enhanced open-circuit voltage (3% increase), short circuit current (16% increase), fill factor (5% increase), showing an enhanced power conversion efficiency of 12.2% (21% increase).
ABSTRACT
A combination of graphene nanoribbons (GNRs) and carbon nanotubes (CNTs) was deployed as a potential candidate to replace the commonly used hole transport material poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) ( PEDOT: PSS) in a high performance organic photovoltaic. A power conversion efficiency (PCE) of 7.6% has been obtained using inkjet printing to fabricate the photovoltaic along with the presence of C60-bis as an electron transporting material.
