Plasmonic Characterization of 3D Printable Metal-Polymer Nanocomposites.

Plasmonic polymer nanocomposites (i.e., polymer matrices containing plasmonic nanostructures) are appealing candidates for the development of manifold technological devices relying on light-matter interactions, provided that they have inherent properties and processing capabilities. The smart development of plasmonic nanocomposites requires in-depth optical analyses proving the material performance, along with correlative studies guiding the synthesis of tailored materials. Importantly, plasmon resonances emerging from metal nanoparticles affect the macroscopic optical response of the nanocomposite, leading to far- and near-field perturbations useful to address the optical activity of the material. We analyze the plasmonic behavior of two nanocomposites suitable for 3D printing, based on acrylic resin matrices loaded with Au or Ag nanoparticles. We compare experimental and computed UV-vis macroscopic spectra (far-field) with single-particle electron energy loss spectroscopy (EELS) analyses (near-field). We extended the calculations of Au and Ag plasmon-related resonances over different environments and nanoparticle sizes. Discrepancies between UV-vis and EELS are dependent on the interplay between the metal considered, the surrounding media, and the size of the nanoparticles. The study allows comparing in detail the plasmonic performance of Au- and Ag-polymer nanocomposites, whose plasmonic response is better addressed, accounting for their intended applications (i.e., whether they rely on far- or near-field interactions).

Chitin Nanocomposites for Fused Filament Fabrication: Flexible Materials with Enhanced Interlayer Adhesion.

In this work, we present a series of nanocomposites for Fused filament fabrication (FFF) based on polycaprolactone (PCL) and chitin nanocrystals (ChNCs). The ChNCs were synthesized by acid hydrolysis using HCl or lactic acid (LA). The approach using LA, an organic acid, makes the ChNCs synthesis more sustainable and modifies their surface with lactate groups, increasing their compatibility with the PCL matrix. The ChNCs characterization by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy revealed that both ChNCs presented similar morphologies and crystallinity, while differential scanning calorimetry and thermogravimetric analysis proved that they can bear temperatures up to 210 °C without degrading, which allows their processing in the manufacturing of PCL composites by twin-screw extrusion. Therefore, PCL composites in the form of filaments containing 0.5-1.0 wt % ChNCs were produced and used as feedstock in FFF, and standard tensile and flexural specimens were printed at different temperatures, up to 170 °C, to assess the influence of the ChNCs in the mechanical properties of the material. The tensile testing results showed that the presence of ChNCs enhances the strength and ductility of the PCL matrix, increasing the elongation at break around 20-50%. Moreover, the vertically printed flexural specimens showed a very different bending behavior, such that the pure PCL specimens presented a brittle fracture at 7% strain, while the ChNCs composites were able to bend over themselves. Hence, this work proves that the presence of ChNCs aims to improve the interlayer adhesion of the objects manufactured by FFF due to their good adhesive properties, which is currently a concern for the scientific community and the industrial sector.

Adoption of mobile learning in the university context: Systematic literature review.

The study on the adoption of mobile learning in university education reveals a growing interest in mobile technologies to improve the learning process; both the acceptance and rejection of these tools among students have been analyzed. However, there are gaps in the research that require a deeper exploration of the factors that influence the adoption and use of these technologies. Understanding these aspects is crucial to optimize mobile learning strategies and improve the educational experience in the university setting. The objective is to examine research trends regarding the topic. PRISMA-2020 is used in the Scopus and Web of Science databases. The results show the questionnaires as the main collection instruments; geographical contexts show that it has been researched predominantly in Asia; The studies have focused on university students; the most applied theories are TAM and UTAUT; and latent variables such as behavioral intention and attitude. The conclusions summarize the trends and patterns observed in the reviewed literature, as well as the research gaps identified, providing a solid foundation for future research and highlighting the importance of addressing this issue in the current context of digital education. The systematic review identifies key models and factors in the adoption of mobile learning in university settings, revealing both theoretical and practical implications. Furthermore, this text provides practical guidance for selecting effective data collection tools and making informed educational and policy decisions. However, it acknowledges limitations such as potential publication and language bias in the search process.

A Comparison of the Efficacy of Treatment With Fidaxomicin Versus Vancomycin in Clostridioides difficile Infection.

Background Clostridioides difficile infection (CDI) is a major cause of diarrhea in hospitalized adult patients. This study aims to evaluate the clinical characteristics, clinical cure, recurrence and mortality in patients with CDI treated with either fidaxomicin or vancomycin. Methods A retrospective case-control study was conducted on patients with CDI treated with either fidaxomicin or vancomycin at a hospital from January 2019 to March 2022. Results We assessed 140 patients with CDI episodes, 70 patients treated with fidaxomicin and 70 with vancomycin. Seventy (50%) were male. Median age was 70 years old (IQR: 56-81). Fidaxomicin group had more recurrent CDI episodes within six months (59% vs 11%, p ≤ 0.001), more severity (43% vs 16%, p ≤ 0.001) and less treatment response (84% vs 100%, p ≤ 0.002) compared with vancomycin group. Recurrence and mortality rates in the follow-up period did not differ in both groups. Conclusions Our study found fidaxomicin treatment had worse outcomes due to restricted usage, potentially impacting its effectiveness in CDI. This finding is especially significant for patients with severe or recurrent CDI, as prescribing of the drug was limited until May 2022 in Spain with the lifting of this restriction, further research is necessary to better understand the potential benefits of fidaxomicin in treating CDI.

Smart home adoption factors: A systematic literature review and research agenda.

Smart homes represent the complement of various automation technologies that together make up a network of devices facilitating the daily tasks of residents. These technologies are being studied for their application from different sectors, including the projection of their use to improve energy consumption planning and health care management. However, technology adoption depends on social awareness within the scope of cognitive advantages and innovations compared to perceived risk because although there are multiple benefits, potential users express fears related to the loss of autonomy and security. This study carries out a systematic literature review based on PRISMA in order to analyze research trends and literary evolution in the technological adoption of smart homes, considering the main theories and variables applied by the community. In proposing a research agenda in accordance with the identified gaps and the growing and emerging themes of the object of study, it is worth highlighting the growing interest in the subject, both for the present and its development in the future. Until now, adoption factors have been attributed more to the technological acceptance model and the diffusion of innovation theory, adopting components of the Theory of Planned Behavior; therefore, in several cases, the attributes of different theories are merged to adapt to the needs of each researcher, promoting the creation of empirical and extended models.

Thermal and Mechanical Properties of Reprocessed Polylactide/Titanium Dioxide Nanocomposites for Material Extrusion Additive Manufacturing.

Polylactic acid (PLA) is a biodegradable polymer that can replace petroleum-based polymers and is widely used in material extrusion additive manufacturing (AM). The reprocessing of PLA leads to a downcycling of its properties, so strategies are being sought to counteract this effect, such as blending with virgin material or creating nanocomposites. Thus, two sets of nanocomposites based respectively on virgin PLA and a blend of PLA and reprocessed PLA (rPLA) with the addition of 0, 3, and 7 wt% of titanium dioxide nanoparticles (TiO2) were created via a double screw extruder system. All blends were used for material extrusion for 3D printing directly from pellets without difficulty. Scanning electron micrographs of fractured samples' surfaces indicate that the nanoparticles gathered in agglomerations in some blends, which were well dispersed in the polymer matrix. The thermal stability and degree of crystallinity for every set of nanocomposites have a rising tendency with increasing nanoparticle concentration. The glass transition and melting temperatures of PLA/TiO2 and PLA/rPLA/TiO2 do not differ much. Tensile testing showed that although reprocessed material implies a detriment to the mechanical properties, in the specimens with 7% nano-TiO2, this effect is counteracted, reaching values like those of virgin PLA.

Manufacture and Characterization of Polylactic Acid Filaments Recycled from Real Waste for 3D Printing.

This paper studies the thermal, morphological, and mechanical properties of 3D-printed polylactic acid (PLA) blends of virgin and recycled material in the following proportions: 100/0, 25/75, 50/50, and 75/25, respectively. Real waste, used as recycled content, was shredded and sorted by size without a washing step. Regular dog-bone specimens were 3D printed from filaments, manufactured in a single screw extruder. Thermogravimetric analysis indicated that adding PLA debris to raw material did not significantly impact the thermal stability of the 3D-printed samples and showed that virgin and recycled PLA degraded at almost the same temperature. Differential scanning calorimetry revealed a significant reduction in crystallinity with increasing recycled content. Scanning electron microscopy showed a more homogenous structure for specimens from 100% pure PLA, as well as a more heterogeneous one for PLA blends. The tensile strength of the PLA blends increased by adding more recycled material, from 44.20 ± 2.18 MPa for primary PLA to 52.61 ± 2.28 MPa for the blend with the highest secondary PLA content. However, this study suggests that the mechanical properties of the reprocessed parts and their basic association are unique compared with those made up of virgin material.

Responsive Optical Materials Based on Ligand-Free Perovskite Quantum Dots Embedded in Mesoporous Scaffolds.

Herein we show that dispersing inorganic cesium lead bromide (CsPbBr3) perovskite quantum dots (QDs) in optical quality films, possessing an accessible and controlled pore size distribution, gives rise to fluorescent materials with a controlled and highly sensitive response to ambient changes. A scaffold-based synthesis approach is employed to obtain ligand-free QDs, whose pristine surface endows them with high sensitivity to the presence of different vapors in their vicinity. At the same time, the void network of the host offers a means to gradually expose the embedded QDs to such vapors. Under these conditions, the luminescent response of the QDs is mediated by the mesostructure of the matrix, which determines the rate at which vapor molecules will adsorb onto the pore walls and, eventually, condensate, filling the void space. With luminescence quantum yields as high as 60%, scaffold-supported ligand-free perovskite nanocrystals display intense photoemission signals over the whole process, as well as high photo- and chemical stability, which allows illuminating them for long periods of time and recovering the original response upon desorption of the condensed phase. The results herein presented open a new route to explore the application of perovskite QD-based materials in sensing.

Evaluating the influence of air pollution on solar radiation observations over the coastal region of Alicante (Southeastern Spain).

The present study evaluates ground-based downward surface shortwave radiation (Rs) over the coastal region of Alicante (Southeastern Spain). Hourly measurements collected over the eleven-year period 2010-2020 are used. Two weather stations located over the region capital, Alicante, have been selected as representative of urban and suburban typologies. Two additional weather stations far from the city have been selected representing rural typologies. Rs is significantly reduced over the urban station during the morning hours within the winter season compared to the observations recorded over the suburban and rural stations, with a global mean difference of -81 and -120 W/m2 at 10 LT, respectively. However, no significant differences are obtained during the midday sun, with a global mean difference of -20 W/m2 between the urban and rural stations. With the aim of explaining these differences, the current paper investigates the relationship between Rs and different air pollutants: NOx, SO2, and fine particulate matter (PM2.5 and PM10) as well as the wind field measured at the urban and suburban stations. The results found in this work point towards a close relationship between Rs and NOx concentrations annual cycles, which are also influenced by the prevailing wind circulations observed over the study area. A global mean NOx concentration of 107 µg/m3 is observed over the urban station at 10 LT during the winter season. In contrast, these high concentrations are significantly reduced over the suburban station, with global mean value of 40 µg/m3 at 10 LT, for this period of the year.

Influence of the Carbon Fiber Length Distribution in Polymer Matrix Composites for Large Format Additive Manufacturing via Fused Granular Fabrication.

Many studies assess the suitability of fiber-reinforced polymer composites in additive manufacturing. However, the influence of the fiber length distribution on the mechanical and functional properties of printed parts using these technologies has not been addressed so far. Hence, in this work we compare different composites based on Acrylonitrile Styrene Acrylate (ASA) and carbon fiber (CF) suitable for large format additive manufacturing (LFAM) technologies based on fused granular fabrication (FGF). We study in detail the influence of the CF size on the processing and final properties of these materials. Better reinforcements were achieved with longer CF, reaching Young's modulus and tensile strength values of 7500 MPa and 75 MPa, respectively, for printed specimens. However, the longer CF also worsened the interlayer adhesion of ASA to a greater extent. The composites also exhibited electrical properties characteristic of electrostatic dissipative (ESD) materials (105-1010 Ω/sq) and low coefficients of thermal expansion below 15 µm/m·°C. These properties are governed by the CF length distribution, so this variable may be used to tune these values. These composites are promising candidates for the design of elements with enhanced mechanical and functional properties for ESD protection elements or molds, so the products can be manufactured on demand.

Stereolithography of Semiconductor Silver and Acrylic-Based Nanocomposites.

Polymer nanocomposites (PNCs) attract the attention of researchers and industry because of their potential properties in widespread fields. Specifically, electrically conductive and semiconductor PNCs are gaining interest as promising materials for biomedical, optoelectronic and sensing applications, among others. Here, metallic nanoparticles (NPs) are extensively used as nanoadditives to increase the electrical conductivity of mere acrylic resin. As the in situ formation of metallic NPs within the acrylic matrix is hindered by the solubility of the NP precursors, we propose a method to increase the density of Ag NPs by using different intermediate solvents, allowing preparation of Ag/acrylic resin nanocomposites with improved electrical behaviour. We fabricated 3D structures using stereolithography (SLA) by dissolving different quantities of metal precursor (AgClO4) in methanol and in N,N-dimethylformamide (DMF) and adding these solutions to the acrylic resin. The high density of Ag NPs obtained notably increases the electrical conductivity of the nanocomposites, reaching the semiconductor regime. We analysed the effect of the auxiliary solvents during the printing process and the implications on the mechanical properties and the degree of cure of the fabricated nanocomposites. The good quality of the materials prepared by this method turn these nanocomposites into promising candidates for electronic applications.

Effect of Thermal and Hydrothermal Accelerated Aging on 3D Printed Polylactic Acid.

In the new transformation of 'Industry 4.0', additive manufacturing technologies have become one of the fastest developed industries, with polylactic acid (PLA) playing a significant role. However, there is an increasing amount of garbage generated during the printing process and after prototypes or end-of-life parts. Re-3D printing is one way to recycle PLA waste from fused filament fabrication. To do this process successfully, the properties of the waste mixture should be known. Previous studies have found that PLA degrades hydrolytically, but the time at which this process occurs for 3D printed products is not specified. This work aims to establish the baseline of the degradation kinetics of 3D printed PLA products to predict the service time until which these properties are retained. To achieve this, 3D printed specimens were thermally and hydrothermally aged during several time intervals. Thermal and mechanical properties were also determined. This study reveals that tensile strength decreases after 1344 h of hydrothermal ageing, simulating 1.5-2.5 years of real service time. PLA therefore has the same thermo-mechanical properties before reaching 1.5-years of age, so it could be recycled.

Comparison of the Material Quality of AlxIn1-xN (x-0-0.50) Films Deposited on Si(100) and Si(111) at Low Temperature by Reactive RF Sputtering.

AlxIn1-xN ternary semiconductors have attracted much interest for application in photovoltaic devices. Here, we compare the material quality of AlxIn1-xN layers deposited on Si with different crystallographic orientations, (100) and (111), via radio-frequency (RF) sputtering. To modulate their Al content, the Al RF power was varied from 0 to 225 W, whereas the In RF power and deposition temperature were fixed at 30 W and 300 °C, respectively. X-ray diffraction measurements reveal a c-axis-oriented wurtzite structure with no phase separation regardless of the Al content (x = 0-0.50), which increases with the Al power supply. The surface morphology of the AlxIn1-xN layers improves with increasing Al content (the root-mean-square roughness decreases from ≈12 to 2.5 nm), and it is similar for samples grown on both Si substrates. The amorphous layer (~2.5 nm thick) found at the interface with the substrates explains the weak influence of their orientation on the properties of the AlxIn1-xN films. Simultaneously grown AlxIn1-xN-on-sapphire samples point to a residual n-type carrier concentration in the 1020-1021 cm-3 range. The optical band gap energy of these layers evolves from 1.75 to 2.56 eV with the increase in the Al. PL measurements of AlxIn1-xN show a blue shift in the peak emission when adding the Al, as expected. We also observe an increase in the FWHM of the main peak and a decrease in the integrated emission with the Al content in room-temperature PL measurements. In general, the material quality of the AlxIn1-xN films on Si is similar for both crystallographic orientations.

Basalt Fiber Composites with Reduced Thermal Expansion for Additive Manufacturing.

Fused filament fabrication (FFF) is gaining attention as an efficient way to create parts and replacements on demand using thermoplastics. This technology requires the development of new materials with a reliable printability that satisfies the requirement of final parts. In this context, a series of composites based on acrylonitrile styrene acrylate (ASA) reinforced with basalt fiber (BF) are reported in this work. First, several surface modification treatments are applied onto the BF to increase their compatibility with the ASA matrix. Then, once the best treatment is identified, the mechanical properties, coefficient of thermal expansion (CTE) and warping distortion of the different specimens designed and prepared by FFF are studied. It was found that the silanized BF is appropriate for an adequate printing, obtaining composites with higher stiffness, tensile strength, low CTE and a significant reduction in part distortion. These composites are of potential interest in the design and manufacturing of final products by FFF, as they show much lower CTE values than pure ASA, which is essential to successfully fabricate large objects using this technique.

Raspberry Shake-Based Rapid Structural Identification of Existing Buildings Subject to Earthquake Ground Motion: The Case Study of Bucharest.

The Internet of things concept empowered by low-cost sensor technologies and headless computers has upscaled the applicability of vibration monitoring systems in recent years. Raspberry Shake devices are among those systems, constituting a crowdsourcing framework and forming a worldwide seismic network of over a thousand nodes. While Raspberry Shake devices have been proven to densify seismograph arrays efficiently, their potential for structural health monitoring (SHM) is still unknown and is open to discovery. This paper presents recent findings from existing buildings located in Bucharest (Romania) equipped with Raspberry Shake 4D (RS4D) devices, whose signal recorded under multiple seismic events has been analyzed using different modal identification algorithms. The obtained results show that RS4D modules can capture the building vibration behavior despite the short-duration and low-amplitude excitation sources. Based on 15 RS4D device readings from five different multistorey buildings, the results do not indicate damage in terms of modal frequency decay. The findings of this research propose a baseline for future seismic events that can track the changes in vibration characteristics as a consequence of future strong earthquakes. In summary, this research presents multi-device, multi-testbed, and multi-algorithm evidence on the feasibility of RS4D modules as SHM instruments, which are yet to be explored in earthquake engineering.

Analysis of Radon Measurements in Relation to Daily Seismic Activity Rates in the Vrancea Region, Romania.

Many previous research studies have shown how local and even regional earthquakes can significantly affect the release of radon in the soil. The aim of this work is to investigate the relationship between radon measurements and the daily seismic activity rate and develop a methodology that allows estimating the seismic activity rate using only radon measurements. To carry out this study, the earthquake catalogue of the Vrancea region (Romania) has been used to estimate the daily seismic activity rate during a given time period, in which radon measurements were also recorded, from January 2016 to September 2020. The Vrancea zone represents the most active seismic zone in Europe and is located on the eastern edge of the strongly bent Carpathian arc. In the case of the radon measurements, seasonal behaviours and linear trends due to non-seismic factors have been identified and subsequently removed. The discrete wavelet transform has been used to analyse the radon signal at two different scales: long and short periods. From the analysis carried out on a long-period scale, an approximate linear relationship has been obtained between the radon series and the daily seismic activity rate, which provides insights into the behaviour of the seismic activity in the study region with only the radon information. In addition, the study reveals certain characteristics that could be used as precursors of earthquakes at different scales: weeks in the case of the estimated daily seismic activity rate, and days in the case of the short-period signal obtained by the wavelet analysis. The results obtained for this region allow us to hope that the analysis of the radon time series can become an effective complement to the conventional seismic analysis used in operational earthquake forecasting.

Self-Assembly of CsPbBr3 Perovskites in Micropatterned Polymeric Surfaces: Toward Luminescent Materials with Self-Cleaning Properties.

In this work, we present a series of porous, honeycomb-patterned polymer films containing CsPbBr3 perovskite nanocrystals as light emitters prepared by the breath figure approach. Microscopy analysis of the topography and composition of the material evidence that the CsPbBr3 nanocrystals are homogeneously distributed within the polymer matrix but preferably confined inside the pores due to the fabrication process. The optical properties of the CsPbBr3 nanocrystals remain unaltered after the film formation, proving that they are stable inside the polystyrene matrix, which protects them from degradation by environmental factors. Moreover, these surfaces present highly hydrophobic behavior due to their high porosity and defined micropatterning, which is in agreement with the Cassie-Baxter model. This is evidenced by performing a proof-of-concept coating on top of 3D-printed LED lenses, conferring the material with self-cleaning properties, while the CsPbBr3 nanocrystals embedded inside the polymeric matrix maintain their luminescent behavior.

Synthesis of Silver Nanocomposites for Stereolithography: In Situ Formation of Nanoparticles.

Additive Manufacturing (AM) offers remarkable advantages in relation to traditional methods used to obtain solid structures, such as the capability to obtain customized complex geometries adapted to individual requirements. The design of novel nanocomposites suitable for AM is an excellent strategy to widen the application field of these techniques. In this work, we report on the fabrication of metal/polymer nanocomposites with enhanced optical/electrical behaviour for stereolithography (SLA). In particular, we analyse the in situ generation of Ag nanoparticles (NPs) from Ag precursors (AgNO3 and AgClO4) within acrylic resins via SLA. Transmission electron microscopy (TEM) analysis confirmed the formation of Ag NPs smaller than 5 nm in all nanocomposites, providing optical activity to the materials. A high density of Ag NPs with a good distribution through the material for the larger concentration of AgClO4 precursor tested was observed, in contrast to the isolated agglomerations found when the precursor amount was reduced to 0.1%. A significant reduction in the electrical resistivity up to four orders of magnitude was found for this material compared to the unfilled resin. However, consumption of part of the photoinitiator in the formation process of the Ag NPs contributed to a reduction in the polymerization degree of the resin and, consequently, degraded the mechanical properties of the nanocomposites. Experiments with longer curing times showed that, for the higher AgClO4 concentrations tested, post-curing times of 300 min allowed an 80% degree of polymerization to be achieved. These conditions turned these materials into promising candidates to obtain solid structures with multifunctional properties.