Effect of poly(ethylene oxide) homopolymer and two different poly(ethylene oxide-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymers on morphological, optical, and mechanical properties of nanostructured unsaturated polyester.

Novel nanostructured unsaturated polyester resin-based thermosets, modified with poly(ethylene oxide) (PEO), poly(propylene oxide) (PPO), and two poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) block copolymers (BCP), were developed and analyzed. The effects of molecular weights, blocks ratio, and curing temperatures on the final morphological, optical, and mechanical properties were reported. The block influence on the BCP miscibility was studied through uncured and cured mixtures of unsaturated polyester (UP) resins with PEO and PPO homopolymers having molecular weights similar to molecular weights of the blocks of BCP. The final morphology of the nanostructured thermosetting systems, containing BCP or homopolymers, was investigated, and multiple mechanisms of nanostructuration were listed and explained. By considering the miscibility of each block before and after curing, it was determined that the formation of the nanostructured matrices followed a self-assembly mechanism or a polymerization-induced phase separation mechanism. The miscibility between PEO or PPO blocks with one of two phases of UP matrix was highlighted due to its importance in the final thermoset properties. Relationships between the final morphology and thermoset optical and mechanical properties were examined. The mechanisms and physics behind the morphologies lead toward the design of highly transparent, nanostructured, and toughened thermosetting UP systems.

Effect of CdSe nanoparticle addition on nanostructuring of PS-b-P4VP copolymer via solvent vapor exposure.

The surface morphology of poly(styrene-b-4 vinyl pyridine) (PS-b-P4VP) diblock copolymer thin films after solvent vapor annealing has been studied. Morphological features can be switched upon exposure to vapors of a solvent selective for one of the blocks. Self-assembled nanostructures such as hexagonal or striped morphologies were obtained varying vapor exposure time. In addition, the effect of the presence of CdSe nanoparticles located in the P4VP block on obtained nanostructures was analyzed. Atomic force microscopy (AFM) was used for morphological characterization of the block copolymer and the nanocomposites. AFM images showed that nanostructuring was different depending on the amount of CdSe nanoparticles, due to the decrease in P4VP chain mobility.

Optical storage in azobenzene-containing epoxy polymers processed as Langmuir Blodgett films.

In this study, azocopolymers containing different main-chain segments have been synthesized with diglycidyl ether of bisphenol A (DGEBA, DER 332, n=0.03) and the azochromophore Disperse Orange 3 (DO3) cured with two monoamines, viz. benzylamine (BA) and m-toluidine (MT). The photoinduced birefringence was investigated in films produced with these azopolymers using the spin coating (SC) and Langmuir Blodgett (LB) techniques. In the LB films, birefringence increased with the content of azochromophore and the film thickness, as expected. The nanostructured nature of the LB films led to an enhanced birefringence and faster dynamics in the writing process, compared to the SC films. In summary, the combination of azocopolymers and the LB method may allow materials with tuned properties for various optical applications, including in biological systems were photoisomerization may be used to trigger actions such as drug delivery.

Functionalisation of CdSe semiconductor nanoparticles with polystyrene brushes by radical polimerization.

CdSe nanoparticles with polystyrene (PS) brushes are obtained by "grafting through" technique starting from solely aqueously synthesized nanoparticles. Mercaptoethanol (ME) capped nanoparticles are used to achieve double bond functional groups on the surface by condensation reaction with methacryloxypropyltrimethoxysilane (MPS). PS polymerization starts from these double bonds. Spectroscopic, diffraction and thermal techniques are used to characterize the nanoparticles. Infrared spectroscopy shows the formation of robust bonding between CdSe nanoparticles and the organic ligand, as well as the presence of the functional double bond on the surface of nanoparticles. Thermal analysis reveals changes in thermal properties of PS, as thermal stability of PS in the functionalised nanoparticles is improved. UV-vis and fluorescence measurements show that PS-CdSe nanoparticles exhibit good optical properties and transmission electron microscope (TEM) micrographs shows good level of dispersion of CdSe nanoparticles in a PS matrix.

Bioinspired antimicrobial and biocompatible bacterial cellulose membranes obtained by surface functionalization with aminoalkyl groups.

There has been a great deal of interest in the use of nanostructured bacterial cellulose membranes for biomedical applications, including tissue implants, wound healing, and drug delivery. However, as bacterial cellulose does not intrinsically present antimicrobial properties, in the present study, antimicrobial bacterial cellulose membranes were obtained by chemical grafting of aminoalkyl groups onto the surface of its nanofibrillar network. This approach intends to mimic intrinsic antimicrobial properties of chitosan. Interestingly, these novel grafted bacterial cellulose membranes (BC-NH2) are simultaneously lethal against S. aureus and E. coli and nontoxic to human adipose-derived mesenchymal stem cells (ADSCs) and thus may be useful for biomedical applications. In addition to these biological properties, the bioactive nanostructured BC-NH2 membranes also present improved mechanical and thermal properties.

Conductive photoswitchable vanadium oxide nanopaper based on bacterial cellulose.

A bacterial cellulose mat was used as a template for the fabrication of conductive photoswitchable hybrid nanopaper by the incorporation of sol-gel synthesized vanadium nanoparticles. The resulting nanopaper, prepared through a green pathway, was able to photoinduce a reversible color change. Conductive properties at the nano- and macroscales were confirmed by electrostatic force microscopy and semiconductor analysis measurements, respectively.

Conductive properties of TiO2/bacterial cellulose hybrid fibres.

Conductive properties of TiO(2) nanoparticles and TiO(2)/BC hybrid inorganic/organic fibres were investigated by electrostatic force microscopy (EFM). TiO(2)/BC hybrid composites were prepared based on bacterial cellulose produced by Gluconobacterxylinum, being the bacterial cellulose as a hydrophilic substrate for TiO(2) nanoparticles synthesized via sol-gel. Taken into account hydrophilic nature of the cellulose, TiO(2) nanoparticles were located on the surface of the fibres due to hydrogen bonding interactions. EFM was used to determine qualitatively conductive properties of TiO(2) nanoparticles and their TiO(2)/BC hybrid inorganic/organic fibres. Results indicate that TiO(2)/BC hybrid fibres respond to applied bias regardless of the sign of the applied voltage.

Effect of alkaline and autohydrolysis processes on the purity of obtained hemicelluloses from corn stalks.

A study of the potential of autohydrolysis and alkaline extraction processes from corn stalks was performed for high purity hemicellulose extraction. The influence of process parameters on the purity of obtained hemicelluloses was analyzed. An experimental design was developed for the autohydrolysis treatments to determine the optimal conditions to solubilize the hemicelluloses with lowest content in contaminants. On the other hand, alkaline extraction, including raw material pretreatment (dewaxing and delignification step) was carried out analyzing the effectiveness of this processes for maximum pure hemicellulose recovery. The maximum yield (54% of the raw material hemicelluloses) and the best physicochemical properties (highest hemicellulose content free of lignin) were obtained with these pretreatments in alkaline extraction. Moreover, the effect of lignin removal by sulfuric acid from the autohydrolysis liquors before hemicellulose precipitation was studied. This purification step has allowed to obtain lignin-free autohydrolysis hemicellulose but with the presence of sulfur as predominant contaminant.

Bacterial cellulose produced by a new acid-resistant strain of Gluconacetobacter genus.

A bacterial strain isolated from the fermentation of Colombian homemade vinegar, Gluconacetobacter medellensis, was investigated as a new source of bacterial cellulose (BC). The BC produced from substrate media consisting of various carbon sources at different pH and incubation times was quantified. Hestrin-Schramm (HS) medium modified with glucose led to the highest BC yields followed by sucrose and fructose. Interestingly, the microorganisms are highly tolerant to low pH: an optimum yield of 4.5 g/L was achieved at pH 3.5, which is generally too low for other bacterial species to function. The cellulose microfibrils produced by the new strain were characterized by scanning and transmission electron microscopy, infrared spectroscopy X-ray diffraction and elemental analysis. The morphological, structural and chemical characteristics of the cellulose produced are similar to those expected for BC.

The role of reactive silicates on the structure/property relationships and cell response evaluation in polyurethane nanocomposites.

Precursors of polyurethane chains have been reacted by means of in situ polymerization with organically modified montmorillonite clay to obtain polyurethane nanocomposites containing from 1 to 4 wt % of nanoreinforcement. The effective final dispersion of inorganic component at nanometric scale was investigated by X-ray diffraction, atomic force microscopy, and transmission electron microscopy. In addition, the effect of the nanoreinforcement incorporation on thermal and mechanical behavior of polyurethane nanocomposites was evaluated. Nanocomposites showed similar mechanical properties to polyurethanes containing high-hard segment contents with higher tensile modulus and a decrease in elastomeric properties of polyurethane materials. Finally, biocompatibility studies using L-929 fibroblast have been carried out to examine in vitro cell response and cytotoxicity of the matrix and their nanocomposite materials. Results suggested that the organic modifier in the clay is unsuitable for biomedical devices in spite of the fact that the matrix is a good candidate for cell adhesion and proliferation.

Enhancing water repellence and mechanical properties of gelatin films by tannin addition.

In order to reduce pollution caused by traditional non-biodegradable plastic films, renewable raw materials from plants and wastes of meat industries have been employed in this work. A hydrolysable chestnut-tree tannin was used for gelatin modification. Films of gelatin and gelatin-tannin were obtained by casting at room conditions. Transition temperatures of both gelatin and gelatin-tannin systems were determined by differential scanning calorimetry (DSC). Glass transition temperatures of modified gelatin occurred at higher temperatures than for neat gelatin. Enthalpy and temperature of helix-coil transition decreased when tannin content increased due to variations in the helical structure of gelatin as a consequence of tannin presence in agreement with X-ray analysis. Mechanical and thermal behaviour varied as a function of the content of tannin, showing optimum values for films modified with 10 wt% tannin. The transparency of films was maintained after modification with tannin. Solubility and swelling tests of the films revealed that the presence of tannin reduced the water affinity of gelatin.

Conductive properties of switchable photoluminescence thermosetting systems based on liquid crystals.

Conductive properties of different thermosetting materials modified with nematic 4'-(hexyl)-4-biphenyl-carbonitrile (HBC) liquid crystal and rutile TiO(2) nanoparticles were successfully studied by means of tunneling atomic force miscroscopy (TUNA). Taking into account the liquid crystal state of the HBC at room temperature, depending on both the HBC content and the presence of TiO(2) nanoparticles, designed materials showed different TUNA currents passed through the sample. The addition of TiO(2) nanoparticles into the systems multiply the detected current if compared to the thermosetting systems without TiO(2) nanoparticles and simultaneously stabilized the current passed through the sample, making the process reversible since the absolute current values were almost the same applying both negative and positive voltage. Moreover, thermosetting systems modified with liquid crystals with and without TiO(2) nanoparticles are photoluminescence switchable materials as a function of temperature gradient during repeatable heating/cooling cycle. Conductive properties of switchable photoluminescence thermosetting systems based on liquid crystals can allow them to find potential application in the field of photoresponsive devices, with a high contrast ratio between transparent and opaque states.

Conductive behavior of high TiO2 nanoparticle content of inorganic/organic nanostructured composites.

Amphiphilic polystyrene-b-poly(ethylene oxide) (PS-b-PEO) diblock copolymers with different block ratios were used as templates for the incorporation of a high content of titanium dioxide nanoparticles using the sol-gel method. Confinement of the inorganic part in the PEO block of the block copolymer allows the generation of nanostructured systems with a high nanoparticle content. As successfully demonstrated using tunneling atomic force microscopy, the investigated systems maintained the conductive properties of the TiO(2) nanoparticles. The obtained results confirmed that with increasing TiO(2) nanoparticle content, the local current value increased up to 15 pA, and this conductivity value strongly depended on the amount of the PEO block in the block copolymer template. Moreover, the results indicated that control of the ratio between the sol-gel and the PEO block allows the design of well-dispersed, conductive inorganic/organic hybrids with high inorganic content. These materials can provide attractive strategies in the field of dye-sensitized solar cells.

Surfactant effects on morphology-properties relationships of silver-poly(styrene-b-isoprene-b-styrene) block copolymer nanocomposites.

Good dispersion of silver nanoparticles in poly(styrene-b-isoprene-b-styrene) block copolymer matrix has been achieved by adding dodecanethiol as surfactant to lower the high surface energy of metal nanoparticles. First, the influence of surfactant in the cylindrical nanostructure of neat block copolymer matrix has been analyzed. Taking into account the high solubility between dodecanethiol and the PS block of the SIS block copolymer, when silver nanoparticles and surfactant have been added to the block copolymer matrix its morphology changes from cylindrical to lamellar nanostructure. For the nanocomposite without surfactant, the block copolymer matrix loses its capability to self-assemble in lamellar nanostructure and in this case, agglomeration of silver nanoparticles occurs. Rheological, mechanical and morphological analysis were carried out in order to study the optimal content of surfactant necessary to obtain well-dispersed nanoparticles without worsen the final properties of the nanocomposite. The best silver/dodecanethiol w/w ratio appears to be 1, as confirmed by UV-Vis analysis. Moreover, semi-empirical models, such as Guth and Gold, and Halpin-Tsai, have been used in order to both predict and verify experimental tensile modulus of the obtained nanocomposites. The Guth and Gold equation, applicable to elastomers filled with spherical nanoparticles, provides a result closer to the experimental values than Halpin-Tsai model.

Nanoindentation study of interphases in epoxy/amine thermosetting systems modified with thermoplastics.

The characterization of a mixture of epoxy/amine with different stoichiometric ratios was carried out by means of nanoindentation. The epoxy system was composed by diglycidyl ether of bisphenol-A and 4,4'-methylene bis-(3-chloro 2,6-diethylaniline). Diffusion through interface formed by epoxy/amine system in stoichiometric ratio and several thermoplastic polymers was also analyzed by means of stiffness analysis, as studied by atomic force microscopy (AFM) and coupled nanoindentation tests. Used thermoplastics were an amorphous, atactic polystyrene, and two semicrystalline, syndiotactic polystyrene and poly(phenylene sulfide). Larger range diffusion was obtained in epoxy/amine systems modified with atactic polystyrene while the study of the influence of stoichiometric ratio suggests that the excess of epoxy generated stiffer material. In addition, larger indentation loads resulted in higher apparent stiffness because of the more number of polymer chains that had to re-accommodate owing to the increase in contact area.

Relationships between the morphology and thermoresponsive behavior in micro/nanostructured thermosetting matrixes containing a 4'-(hexyloxy)-4-biphenylcarbonitrile liquid crystal.

Meso/nanostructured thermoresponsive thermosetting materials based on an epoxy resin modified with two different molecular weight amphiphilic poly(styrene- block-ethylene oxide) block copolymers (PSEO) and a low molecular weight liquid crystal, 4'-(hexyloxy)-4-biphenylcarbonitrile (HOBC), were investigated. A strong influence of the addition of PSEO on the morphology generated in HOBC--(diglicydyl ether of bisphenol A epoxy resin/ m-xylylenediamine) was detected, especially in the case of the addition of PSEO block copolymers with a higher PEO-block content and a lower molecular weight. The morphologies generated in the ternary systems also influenced the thermoresponsive behavior of the HOBC separated phase provoked by applying an external field, such as a temperature gradient and an electrical field. Thermal analysis of the investigated materials allowed for a better understanding of the relationships between generated morphology/thermo-optical properties/PSEO:HOBC ratio, and HOBC content. Controlling the relationship between the morphology and thermoresponsive behavior in micro/nanostructured thermosetting materials based on a 4'-(hexyloxy)-4-biphenylcarbonitrile liquid crystal allows the development of materials which can find application in thermo- and in some cases electroresponsive devices, with a high contrast ratio between transparent and opaque states.

Plantain fibre bundles isolated from Colombian agro-industrial residues.

Comestible fruit production from Musaceas plants is an important economical activity in developing countries like Colombia. However, it generates a large amount of agro-industrial residues. Some of them are a potential resource of natural fibres, which can be used as reinforcement for composite materials. In this work, a series of commercial plantain (Musa AAB, cv "Dominico Harton") fibre bundles extracted from pseudostem, leaf sheath and rachis agricultural wastes were analyzed. Mechanical decortication and biological retting processes were used during fiber extraction. No significant differences in composition of vascular bundles were observed for both extraction processes. Gross morphological characteristics and mechanical behavior have been evaluated. Conducting tissues with spiral-like arrangement are observed attached to fibre bundles. This fact suggests a big amount of these tissues in commercial plantain plants. Both used extraction methods are not enough to remove them. Pseudostem fibre bundles have higher specific strength and modulus and lower strain at break than leaf sheath and rachis fibre bundles, having values comparable to other lignocellulosic fibres bundles.

Biological natural retting for determining the hierarchical structuration of banana fibers.

Extraction processes of natural fibers can be performed by different procedures that include mechanical, chemical and biological methods. Each method presents different advantages or drawbacks according to the amount of fiber produced or the quality and properties of fiber bundles obtained. In this study, biological natural retting was satisfactorily used for obtaining banana fibers from plant bunches. However, the most important contribution of this work refers to the description of the hierarchical microstructural ordering present in banana fiber bundles in both bundle surface and inner region. The chemical composition of banana fiber bundles has been evaluated by FTIR spectroscopy. Through exposure time, the fiber bundle configuration presents small variations in composition. The main changes are related to hemicellulose and pectins as they conform the outer walls of the bundle. Hierarchical helicoidal ordering in the bundle surface as well as orientation on the longitudinal axis of the bundle were observed by optical microscopy (OM) and scanning electron microscopy (SEM) for 3-4 microm surface fibers and 10-15 microm inner elementary fibers, respectively. With increasing exposure time, fiber bundle walls lose integrity, as reflected in their mechanical behavior.