ABSTRACT
We report on an extended cavity quantum cascade laser based on a cavity resonator integrated grating filter (CRIGF) that acts as both cavity end-reflector and spectral selector. Stable, mode-hop free, single-mode emission around 2150 cm-1 is obtained over large injection current ranges (more than 50 mA) with a typical threshold around 290 mA. A digital frequency tuning over more than 65 cm-1 is obtained by changing the periodicity of the CRIGF ending the extended cavity.
ABSTRACT
Cavity Resonator Grating Filters (CRIGFs) working in the Mid-Infrared are reported, with narrow-band resonant reflectivity peaks around 2200 cm-1 (4.6 µm). They are fabricated in the GaAs/AlGaAs material system that can potentially cover the whole [1-12] µm spectral range. TE-polarized peak reflectivity is 30% with a 4 cm-1 full width at half maximum.
ABSTRACT
We demonstrated Graded Cavity Resonator Integrated Grating Filters (G-CRIGFs) that are narrowband spectral reflectors, spectrally tunable over more than 40 nm around 850 nm using a spatial gradient. A simple analytical model is introduced and validated experimentally to determine spectral performance of G-CRIGFs from the spectral properties of a standard Cavity Resonator Integrated Grating Filter (CRIGF).
ABSTRACT
We design a narrowband polarization independent transmission guided mode resonance filter whose center wavelength is tunable with respect to the angle of incidence. The device is composed of two identical structures assembled back to back. Each half structure is a dielectric multilayer stack in which a grating is engraved. This so-called 2×1D crossed gratings component has already been demonstrated for reflection filtering [Opt. Lett.36, 1662 (2011)OPLEDP0146-959210.1364/OL.36.001662; Opt. Lett.39, 6038 (2014)OPLEDP0146-959210.1364/OL.39.006038]. The functioning in transmission requires the use of a high index material for the grating bumps. For the design, we resort to a clustering global optimization algorithm, used for the first time to our knowledge for grating structures. We demonstrated two filters with a quality factor of about 4000, tunable over more than 15 nm when the angle of incidence varies over a range of 4°, and with a transmittivity at resonance greater than 95% whatever the incident polarization.
ABSTRACT
Cavity-resonator-integrated guided-mode resonance filters (CRIGFs) are optical filters based on weak coupling by a grating between a free-space propagating optical mode and a guided mode, like guided-mode resonance filters (GMRFs). As compared to GMRFs they offer narrowband reflection with small aperture and high angular acceptance. We report experimental characterization and theoretical modeling of unexpected high-order reflected modes in such devices. Using coupled-mode modeling and moiré analysis we provide physical insight on key mechanisms ruling CRIGF properties. This model could serve as a simple and efficient framework to design new reflectors with tailored spatial and spectral modal reflectivities.
ABSTRACT
We demonstrate experimentally a spectral filter with high Q-factor (≃3238), wide accordability range (1500-1600 nm) with respect to the angle of incidence, and record polarization independence. This work is an experimental validation of the theoretical work reported in [Opt. Lett. 36, 1662 (2011)]: the filter is composed of two 1D crossed gratings engraved on each side of a planar waveguide. We provide a good comparison with theory and physical interpretations of the features observed experimentally.
ABSTRACT
Mesoscopic self-collimation (MSC) in mesoscopic photonic crystals with high reflectivity is exploited to realize a novel high Q-factor cavity by means of mesoscopic PhC planar mirrors. These mirrors efficiently confine a mode inside a planar Fabry-Perot-like cavity, that results from a beam focusing effect that stabilizes the cavity even for small beam sizes, resembling the focusing behavior of curved mirrors. Moreover, they show an improved reflectivity with respect to their standard distributed Bragg reflector counterparts that allows higher compactness. A Q-factor higher than 104 has been achieved for an optimized 5-period-long mirror cavity. The optimization of the Q-factor and the performances in terms of energy storage, field enhancement, and confinement are detailed.
ABSTRACT
Guided mode resonance filters (GMRFs) are a promising new generation of reflective narrow band filters, that combine structural simplicity with high efficiency. However their intrinsic poor angular tolerance and huge area limit their use in real life applications. Cavity-resonator-integrated guided-mode resonance filters (CRIGFs) are a new class of reflective narrow band filters. They offer in theory narrow-band high-reflectivity with a much smaller footprint than GMRF. Here we demonstrate that for tightly focused incident beams adapted to the CRIGF size, we can obtain simultaneously high spectral selecitivity, high reflectivity, high angular acceptance with large alignment tolerances. We demonstrate experimentally reflectivity above 74%, angular acceptance greater than ±4.2° for a narrow-band (1.4 nm wide at 847 nm) CRIGF.
ABSTRACT
We propose an optical component for widely tunable, narrow-band filtering. It takes advantage of the tunability properties, with respect to the angle of incidence, of guided-mode resonance filters. The intrinsic polarization sensitivity of the resonances is suppressed by exciting the modes through two identical, differently oriented one-dimensional gratings flanking a thick substrate. An example is provided that theoretically shows a polarization independent peak at 1.6 µm with a Q factor of 13,000 and a reflectivity greater than 99% at resonance, which is tunable over 100 nm. Finally, we discuss the fabrication limitations and conclude that the proposed configuration is realistic.
ABSTRACT
We report the measurement of a polarization-independent guided-mode resonant filter with a Q factor of approximately 2200 functioning near normal incidence in the near infrared (850 nm). Besides this remarkable performance, we provide a detailed optical and structural characterization of the component, which points out the origins of the limitation of the experimental performance. We conclude that the defaults in question can be corrected by improving the lithography process, and we are confident that even greater performance will be obtained in future realizations.
ABSTRACT
The interference between the emission originating from the short and long electron quantum paths is intrinsic to the high harmonic generation process. We investigate the universal properties of these quantum-path interferences in various generation media and discuss how ionization effects influence the observed interference structures. Our comparison of quantum-path interferences observed in xenon, argon, and neon demonstrates that our experimental tools are generally applicable and should also allow investigating more complex systems such as molecules or clusters.
Subject(s)
Light , Models, Theoretical , Refractometry/methods , Scattering, Radiation , Computer Simulation , Ions , Quantum TheoryABSTRACT
We have investigated the intensity dependence of high-order harmonic generation in argon when the two shortest quantum paths contribute to the harmonic emission. For the first time to our knowledge, experimental conditions were found to clearly observe interference between these two quantum paths that are in excellent agreement with theoretical predictions. This result is a first step towards the direct experimental characterization of the full single-atom dipole moment and demonstrates an unprecedented accuracy of quantum path control on an attosecond time scale.
ABSTRACT
We introduce a new approach to the characterization of femtosecond optical pulses based on a remarkably simple setup combining a two-photon detector and a pulse shaper consisting of a longitudinal acousto-optic programmable filter. The operation of this setup is demonstrated through the use of a new version of spectral phase interferometry for direct electric-field reconstruction based on time-domain instead of on frequency-domain interferometry.
