Gluco-oligosaccharides synthesized by glucosyltransferases from constitutive mutants of Leuconostoc mesenteroides strain Lm 28.

AIMS: To find different types of glucosyltransferases (GTFs) produced by Leuconostoc mesenteroides strain Lm 28 and its mutant forms, and to check the effectiveness of gluco-oligosaccharide synthesis using maltose as the acceptor. METHODS AND RESULTS: Constitutive mutants were obtained after chemical mutagenesis by ethyl methane sulfonate. Lm M281 produced more active GTFs than that obtained by the parental strain cultivated on sucrose. GTF from Lm M286 produced a resistant glucan, based on endo-dextranase and amyloglucosidase hydrolysis. The extracellular enzymes from Lm M286 catalyse acceptor reactions and transfer the glucose unit from sucrose to maltose to produce gluco-oligosaccharides (GOS). By increasing the sucrose/maltose ratio, it was possible to catalyse the synthesis of oligosaccharides of increasing degree of polymerization (DP). CONCLUSIONS: Different types of GTFs (dextransucrase, alternansucrase and levansucrase) were produced from new constitutive mutants of Leuc. mesenteroides. GTFs from Lm M286 can catalyse the acceptor reaction in the presence of maltose, leading to the synthesis of branched oligosaccharides. SIGNIFICANCE AND IMPACT OF THE STUDY: Conditions were optimized to synthesize GOS by using GTFs from Lm M286, with the aim of producing maximum quantities of branched-chain oligosaccharides with DP 3-5. This would allow the use of the latter as prebiotics.

Effect of non-digestible gluco-oligosaccharides on glucose sensitivity in high fat diet fed mice.

Non digestible dietary carbohydrates have been reported to modify lipaemia and post-prandial glycaemia and insulinaemia. The aim of this study was to investigate the effect of a non-digestible gluco-oligosaccharides (GOS) diet on glucose, insulin, triglycerides and free fatty acid blood levels and glucose sensitivity in high fat diet fed mice (a high fat diet composed of 45% fat, 35% carbohydrate and 20% protein). Female C57B16/J mice were divided into two groups fed a high fat diet (HF) for 20 weeks supplemented or not with 1.5 g/kg/day of GOS (HF-GOS). The GOS supplementation did not change body weight nor fat pad mass, nor any of the blood parameters measured (glucose, insulin, leptin, triglycerides, and free fatty acids). However, mice which received the GOS supplemented diet showed an increased glucose utilization after a 1 g/kg load of glucose compared with the mice fed the high fat diet alone. Our results suggest a role for non-digestible GOS in the regulation of carbohydrate metabolism.

Esterification by immobilized lipase in solvent-free media: kinetic and thermodynamic arguments.

The aim of this study is to characterize, in solvent-free systems (SFS), the kinetic and thermodynamic performance of batch lipase-catalyzed esterification. SFS are compared to a conventional organic solvent, n-hexane. The esterification of oleic acid with ethanol was chosen as a model reaction. The TABEK (thermodynamic activity-based enzyme kinetics) approach was used to rationally analyze kinetics. Influence of the reaction medium on final conversions was also studied. Several factors, such as initial molar ratio of substrates, reactant availability, initial water content, and quantity of immobilized enzyme, were examined. Special attention was also turned to enzyme stability and reuse after reaction, this last item being a prerequisite in the development of industrial processes. SFS proved to be almost as efficient as n-hexane from a kinetic and thermodynamic point of view and offered a better volumetric production.

Reactor optimization for alpha-1,2 glucooligosaccharide synthesis by immobilized dextransucrase.

The immobilization of dextransucrase in Ca-alginate beads relies on the close association between dextran polymer and dextransucrase. However, high amounts of dextran in the enzyme preparation drastically limit the specific activity of the immobilized enzyme (4 U/mL of alginate beads). Moreover, even in the absence of diffusion limitation at the batch conditions used, the enzyme behavior is modified by entrapment so that the dextran yield increases and the alpha-1,2 glucooligosaccharides (GOS) are produced with a lower yield (46.6% instead of 56.7%) and have a lower mean degree of polymerization than with the free dextransucrase. When the immobilized catalyst is used in a continuous reaction, the reactor flow rate necessary to obtain high conversion of the substrates is very low, leading to external diffusion resistance. As a result, dextran synthesis is even higher than in the batch reaction, and its accumulation within the alginate beads limits the operational stability of the catalyst and decreases glucooligosaccharide yield and productivity. This effect can be limited by using reactor columns with length to diameter ratio > or =20, and by optimizing the substrate concentrations in the feed solution: the best productivity obtained was 3.74 g. U(-1). h(-1), with an alpha-1,2 GOS yield of 36%.

Factors affecting alpha,-1,2 glucooligosaccharide synthesis by Leuconostoc mesenteroides NRRL B-1299 dextransucrase.

The optimization of alpha-1,2 glucooligosaccharide (GOS) synthesis from maltose and sucrose by Leuconostoc mesenteroides NRRL B-1299 dextransucrase was achieved using experimental design and consecutive analysis of the key parameters. An increase of the pH of the reaction from 5.4 to 6.7 and of the temperature from 25 to 40 degrees C significantly favored alpha-1,2 GOS synthesis, thanks to a significant decrease of the side reactions, i.e., dextran and leucrose synthesis. These positive effects were not sufficient to compensate for the decrease of enzyme stability caused by the use of high pH and temperature. However, the critical parameters were the sucrose to maltose concentration ratio (S/M) and the total sugar concentration (TSC). Alpha1,2 GOS synthesis was favored at high S/M ratios. But using these conditions also led to an increase of side reactions which could be modulated by choosing the appropriate TSC. Finally, with S/M = 4 and TSC = 45% w/v, dextran and leucrose productions were limited and the final alpha-1,2 GOS yield reached 56.7%, the total GOS yield being 88%.

Crystal structures of amylosucrase from Neisseria polysaccharea in complex with D-glucose and the active site mutant Glu328Gln in complex with the natural substrate sucrose.

The structure of amylosucrase from Neisseria polysaccharea in complex with beta-D-glucose has been determined by X-ray crystallography at a resolution of 1.66 A. Additionally, the structure of the inactive active site mutant Glu328Gln in complex with sucrose has been determined to a resolution of 2.0 A. The D-glucose complex shows two well-defined D-glucose molecules, one that binds very strongly in the bottom of a pocket that contains the proposed catalytic residues (at the subsite -1), in a nonstrained (4)C(1) conformation, and one that binds in the packing interface to a symmetry-related molecule. A third weaker D-glucose-binding site is located at the surface near the active site pocket entrance. The orientation of the D-glucose in the active site emphasizes the Glu328 role as the general acid/base. The binary sucrose complex shows one molecule bound in the active site, where the glucosyl moiety is located at the alpha-amylase -1 position and the fructosyl ring occupies subsite +1. Sucrose effectively blocks the only visible access channel to the active site. From analysis of the complex it appears that sucrose binding is primarily obtained through enzyme interactions with the glucosyl ring and that an important part of the enzyme function is a precise alignment of a lone pair of the linking O1 oxygen for hydrogen bond interaction with Glu328. The sucrose specificity appears to be determined primarily by residues Asp144, Asp394, Arg446, and Arg509. Both Asp394 and Arg446 are located in an insert connecting beta-strand 7 and alpha-helix 7 that is much longer in amylosucrase compared to other enzymes from the alpha-amylase family (family 13 of the glycoside hydrolases).

Novel oligosaccharides synthesized from sucrose donor and cellobiose acceptor by alternansucrase.

Cellobiose was tested as acceptor in the reaction catalyzed by alternansucrase (EC 2.4.1.140) from Leuconostoc mesenteroides NRRL B-23192. The oligosaccharides synthesized were compared to those obtained with dextransucrase from L. mesenteroides NRRL B-512F. With alternansucrase and dextransucrase, overall oligosaccharide synthesis yield reached 30 and 14%, respectively, showing that alternansucrase is more efficient than dextransucrase for cellobiose glucosylation. Interestingly, alternansucrase produced a series of oligosaccharides from cellobiose. Their structure was determined by mass spectrometry and [13C-1H] NMR spectroscopy. Two trisaccharides are first produced: alpha-D-glucopyranosyl-(1-->2)-[beta-D-glucopyranosyl-(1-->4)]-D-glucopyranose (compound A) and alpha-D-glucopyranosyl-(1-->6)-beta-D-glucopyranosyl-(1-->4)-D-glucopyranose (compound B). Then, compound B can in turn be glucosylated leading to the synthesis of a tetrasaccharide with an additional alpha-(1-->6) linkage at the non-reducing end (compound D). The presence of the alpha-(1-->3) linkage occurred only in the pentasaccharides (compounds C1 and C2) formed from tetrasaccharide D. Compounds B, C1, C2 and D were never described before. They were produced efficiently only by alternansucrase. Their presence emphasizes the difference existing in the acceptor reaction selectivity of the various glucansucrases.

Amylosucrase, a glucan-synthesizing enzyme from the alpha-amylase family.

Amylosucrase (E.C. 2.4.1.4) is a member of Family 13 of the glycoside hydrolases (the alpha-amylases), although its biological function is the synthesis of amylose-like polymers from sucrose. The structure of amylosucrase from Neisseria polysaccharea is divided into five domains: an all helical N-terminal domain that is not similar to any known fold, a (beta/alpha)(8)-barrel A-domain, B- and B'-domains displaying alpha/beta-structure, and a C-terminal eight-stranded beta-sheet domain. In contrast to other Family 13 hydrolases that have the active site in the bottom of a large cleft, the active site of amylosucrase is at the bottom of a pocket at the molecular surface. A substrate binding site resembling the amylase 2 subsite is not found in amylosucrase. The site is blocked by a salt bridge between residues in the second and eight loops of the (beta/alpha)(8)-barrel. The result is an exo-acting enzyme. Loop 7 in the amylosucrase barrel is prolonged compared with the loop structure found in other hydrolases, and this insertion (forming domain B') is suggested to be important for the polymer synthase activity of the enzyme. The topology of the B'-domain creates an active site entrance with several ravines in the molecular surface that could be used specifically by the substrates/products (sucrose, glucan polymer, and fructose) that have to get in and out of the active site pocket.

Enzymatic synthesis of alpha-butylglucoside linoleate in a packed bed reactor for future pilot scale-up.

The enzymatic synthesis of a mixture of unsaturated fatty acid alpha-butylglucoside esters, containing more than 60% alpha-butylglucoside linoleate, was achieved through lipase-catalyzed esterification. The continuous evaporation under reduced pressure of the water produced enabled substrate conversions greater than 95% to be reached. Two immobilized lipases from Candida antarctica (Chirazyme L2, c.-f., C2) and Rhizomucor miehei (Chirazyme L9, c.-f.) were compared in stirred batch and packed bed configurations. When the synthesis was carried out in stirred batch mode, C. antarctica lipase appeared to be of greater interest than the R. miehei enzyme in terms of stability and regioselectivity. Surprisingly, a change in the process design to a packed bed configuration enabled the stability of R. miehei lipase to be significantly improved, while the C. antarctica lipase efficiency to synthesize unsaturated fatty acid alpha-butylglucoside esters was slightly decreased. Water content in the microenvironment of the biocatalyst was assumed to be responsible for such changes. When the process is run in stirred batch mode, the conditions used promote the evaporation of the essential water surrounding the enzyme, which probably leads to R. miehei lipase dehydration. In contrast, the packed bed design enabled such water evaporation in the microenvironment of the biocatalyt to be avoided, which resulted in a tremendous improvement of R. miehei lipase stability. However, C. antarctica lipase led to the formation of 3% diesters, whereas the final percentage of diesters reached 21% when R. miehei enzyme was used as biocatalyst. A low content of diesters is of greater interest in terms of alpha-butylglucoside linoleate application as linoleic acid carrier, and therefore the enzyme choice will have to be made depending on the properties expected for the final product.

Identification of key amino acid residues in Neisseria polysaccharea amylosucrase.

Amylosucrase from Neisseria polysaccharea catalyzes the synthesis of an amylose-like polymer from sucrose. Sequence alignment revealed that it belongs to the glycoside hydrolase family 13. Site-directed mutagenesis enabled the identification of functionally important amino acid residues located at the active center. Asp-294 is proposed to act as the catalytic nucleophile and Glu-336 as general acid base catalyst in amylosucrase. The conserved Asp-401, His-195 and His-400 residues are critical for the enzymatic activity. These results provide strong support for the predicted close structural and functional relationship between the sucrose-glucosyltransferases and enzymes of the alpha-amylase family.

Amylosucrase from Neisseria polysaccharea: novel catalytic properties.

Amylosucrase is a glucosyltransferase that synthesises an insoluble alpha-glucan from sucrose. The catalytic properties of the highly purified amylosucrase from Neisseria polysaccharea were characterised. Contrary to previously published results, it was demonstrated that in the presence of sucrose alone, several reactions are catalysed, in addition to polymer synthesis: sucrose hydrolysis, maltose and maltotriose synthesis by successive transfers of the glucosyl moiety of sucrose onto the released glucose, and finally turanose and trehalulose synthesis - these two sucrose isomers being obtained by glucosyl transfer onto fructose. The effect of initial sucrose concentration on initial activity demonstrated a non-Michaelian profile never previously described.

Characterisation of the activator effect of glycogen on amylosucrase from Neisseria polysaccharea.

Amylosucrase produces an insoluble alpha-1,4-linked glucan from sucrose, releasing fructose. In addition to polymerisation, in the presence of sucrose as sole substrate, amylosucrase catalyses sucrose hydrolysis and oligosaccharide synthesis in significant proportions. The effects of both glycogen acceptor and sucrose concentrations on the reactions catalysed by the highly purified amylosucrase from Neisseria polysaccharea were investigated. Sucrose hydrolysis decreased strongly with the increase of the concentration of glycogen, as did oligosaccharide synthesis, by glucose transfer onto glucose and fructose. The glucosyl units consumed were then preferentially used for elongation of glycogen chains. The study of the kinetic behaviour of amylosucrase revealed a strong, sucrose concentration dependent activator effect of glycogen. This activation was decreased at high sucrose concentration. The optimal sucrose concentrations increased with glycogen concentration, suggesting competition between sucrose and glycogen, and the presence of a second non-catalytic acceptor binding site which could bind various acceptors (glucose, maltose, glycogen) and also sucrose.

Crystallization and preliminary X-ray studies of recombinant amylosucrase from Neisseria polysaccharea.

Recombinant amylosucrase from Neisseria polysaccharea was crystallized by the vapour-diffusion procedure in the presence of polyethylene glycol 6000. The crystals belong to the orthorhombic space group P2(1)2(1)2, with unit-cell parameters a = 95.7, b = 117.2, c = 62.1 A, and diffract to 1.6 A resolution. A p-chloromercuribenzene sulfonate (pcmbs) derivative has been identified and a selenomethionine-substituted protein has been produced and crystallized.

Sequence analysis of the gene encoding alternansucrase, a sucrose glucosyltransferase from Leuconostoc mesenteroides NRRL B-1355.

The gene encoding alternansucrase (ASR) from Leuconostoc mesenteroides NRRL B-1355, an original sucrose glucosyltransferase (GTF) specific to alternating alpha-1,3 and alpha-1,6 glucosidic bond synthesis, was cloned, sequenced and expressed into Escherichia coli. Recombinant enzyme catalyzed oligoalternan synthesis from sucrose and maltose acceptor. From sequence comparison, it appears that ASR possesses the same domains as those described for GTFs specific to either contiguous alpha-1,3 osidic bond or contiguous alpha-1,6 osidic bond synthesis. However, the variable region and the glucan binding domain are longer than in other GTFs (by 100 and 200 amino acids respectively). The N-catalytic domain which presents 49% identity with the other GTFs from L. mesenteroides possesses the three determinants potentially involved in the glucosyl enzyme formation.

Induction and transcription studies of the dextransucrase gene in Leuconostoc mesenteroides NRRL B-512F.

Dextransucrase production by Leuconostoc mesenteroides NRRL B-512F in media containing carbon sources other than sucrose is reported for the first time. Dextransucrases were analyzed by gel electrophoresis and by an in situ activity assay. Their polymers and acceptor reaction products were also compared by (13)C nuclear magnetic resonance and high-performance liquid chromatography techniques, respectively. From these analyses, it was found that, independently of the carbon source, L. mesenteroides NRRL B-512F produced dextransucrases of the same size and product specificity. The 5' ends of dextransucrase mRNAs isolated from cells grown under different culture conditions were identical. Based on this evidence, we conclude that dextransucrases obtained from cells grown on the various carbon sources result from the transcription of the same gene. The control of expression occurs at this level. The low dextransucrase yields from cultures in D-glucose or D-fructose and the enhancement of dextransucrase gene transcription in the presence of sucrose suggest that an activating phenomenon may be involved in the expression mechanism. Dextransucrase mRNA has a size of approximately 4.8 kb, indicating that the gene is located in a monocistronic operon. The transcription start point was localized 34 bp upstream from the ATG start codon. The -10 and -35 sequences found, TATAAT and TTTACA, were highly homologous to the only glycosyltransferase promoter sequence reported for lactic acid bacteria.

Enzymatic synthesis of unsaturated fatty acid glucoside esters for dermo-cosmetic applications.

Unsaturated fatty acid alpha-butylglucoside esters were prepared by enzymatic esterification of alpha-butylglucoside in nonaqueous media. Conditions were firstly optimized using oleic acid as acyl group. Synthesis was possible in several solvents but the presence of water co-product in the medium limited the reaction to a thermodynamic equilibrium corresponding to a maximal conversion yield of 62%. In pure molten substrates, the removal of water under reduced pressure enabled yields superior to 95% to be obtained. Product profiles depended on enzyme origin : whatever the support, immobilized lipase B from Candida antarctica proved to be far more regioselective for the primary hydroxyl group of glucose than immobilized lipase from Rhizomucor miehei. Results obtained could be easily transposed to the acylation of alpha-butylglucoside with a commercial mixture of unsaturated fatty acids containing more than 60% of linoleic acid. The biocatalyst could be recycled more than ten times without any significant activity loss.

Glucansucrases: mechanism of action and structure-function relationships.

Glucansucrases are produced principally by Leuconostoc mesenteroides and oral Streptococcus species, but also by the lactic acid bacteria (Lactococci, Lactobacilli). They catalyse the synthesis of high molecular weight D-glucose polymers, named glucans, from sucrose. In the presence of efficient acceptors, they catalyse the synthesis of low molecular weight oligosaccharides. Glucosidic bond synthesis occurs without the mediation of nucleotide activated sugars and cofactors are not necessary. Glucansucrases have an industrial value because of the production of dextrans and oligosaccharides and a biological importance by their key role in the cariogenic process. They were identified more than 50 years ago. The first glucansucrase encoding gene was cloned more than 10 years ago. But the mechanism of their action remains incompletely understood. However, in order to synthesise oligosaccharides of biological interest or to develop vaccines against dental caries, elucidation of the factors determining the regiospecificity and the regioselectivity of glucansucrases is necessary. The cloning of glucansucrase encoding genes in addition to structure-function relationship studies have allowed the identification of important amino acid residues and have shown that glucansucrases are composed of two functional domains: a core region (ca. 1000 amino acids) involved in sucrose binding and splitting and a C-terminal domain (ca. 500 amino acids) composed of a series of tandem repeats involved in glucan binding. Enzymology studies have enabled different models for their action mechanism to be proposed. The use of secondary structure prediction has led to a clearer knowledge of structure-function relationships of glucansucrases. However, mainly due to the large size of these enzymes, data on the three-dimensional structure of glucansucrases (given by crystallography and modelling) remain necessary to clearly identify those features which determine function.

Enzymatic synthesis of alpha-butylglucoside lactate: a new alpha-hydroxy acid derivative.

An alpha-hydroxy acid derivative, alpha-butylglucoside lactate, was successfully prepared by enzymatic transesterification of alpha-butylglucoside with a lactate alkyl ester in a non-aqueous medium using immobilized lipase as biocatalyst. Ester synthesis in organic solvent was optimized. Solvent choice was made on the basis of substrate solubility and enzyme stability in the medium. A solvent-free reaction using butyllactate as lactate donor led to the highest yields. In the presence of 0.5M alphabutylglucoside and 100 g/L Novozym(R), a 67 % yield could be obtained within 40 h at 50 degrees C. However, the presence of butanol by-product limited the reaction to a maximum that could not be exceeded in closed systems. The elimination of the alcohol under reduced pressure resulted in the complete equilibrium shift of the transesterification reaction in favor of synthesis; below 15 mbars, more than 95% of 0.5M alpha-butylglucoside could be converted within 30 h. Moreover, simultaneous evaporation of water allowed hydrolysis of butyllactate to be eliminated. Consequently, a very high alpha-butylglucoside lactate concentration (170 g/) could be obtained in a single batch reaction. A single purification procedure, consisting of butyllactate extraction with hexane, enabled the product to be obtained at a purity above 95% (w/w). 1H and 13C NMR analysis later demonstrated that lactic acid was exclusively grafted onto the primary hydroxyl group of alphabutylglucoside.

Kinetic modeling of oligosaccharide synthesis catalyzed by leuconostoc mesenteroides NRRL B-1299 dextransucrase

The kinetic behavior of soluble and insoluble forms of dextransucrase from Leuconostoc mesenteroides NRRL B-1299 was investigated with sucrose as substrate and maltose as acceptor. To study the parameters involved, a kinetic model was applied that was previously developed for L. mesenteroides NRRL B-512F dextransucrase. There are significant correlations between the parameters of the soluble form of B-1299 dextransucrase and those calculated for the B-512F enzyme; that is, their properties are comparable and differ from those of the insoluble form of B-1299 dextransucrase. Whereas the calculated parameters for high maltose concentrations describe the kinetic behavior very well, the time curves for low maltose concentrations were not described correctly. Therefore, the parameters were calculated separately for the two ranges. Copyright 1999 John Wiley & Sons, Inc.

Sequence analysis of the gene encoding amylosucrase from Neisseria polysaccharea and characterization of the recombinant enzyme.

The Neisseria polysaccharea gene encoding amylosucrase was subcloned and expressed in Escherichia coli. Sequencing revealed that the deduced amino acid sequence differs significantly from that previously published. Comparison of the sequence with that of enzymes of the alpha-amylase family predicted a (beta/alpha)8-barrel domain. Six of the eight highly conserved regions in amylolytic enzymes are present in amylosucrase. Among them, four constitute the active site in alpha-amylases. These sites were also conserved in the sequence of glucosyltransferases and dextransucrases. Nevertheless, the evolutionary tree does not show strong homology between them. The amylosucrase was purified by affinity chromatography between fusion protein glutathione S-transferase-amylosucrase and glutathione-Sepharose 4B. The pure enzyme linearly elongated some branched chains of glycogen, to an average degree of polymerization of 75.