Generation and Stability of the gem-Diol Forms in Imidazole Derivatives Containing Carbonyl Groups. Solid-State NMR and Single-Crystal X-ray Diffraction Studies.

The stability of gem-diol forms in imidazolecarboxaldehyde isomers was studied by solid-state nuclear magnetic resonance (ss-NMR) combined with single-crystal X-ray diffraction studies. These methodologies also allowed determining the factors governing the occurrence of such rare functionalization in carbonyl moieties. Results indicated that the position of the carbonyl group is the main factor that governs the generation of geminal diols, having a clear and direct effect on hydration, since, under the same experimental conditions, only 36% of 5-imidazolecarboxaldehydes and 5% of 4-imidazolecarboxaldehydes were hydrated, as compared to 2-imidazolecarboxaldehydes, with which a 100% hydration was achieved. Not only did trifluoroacetic acid favor the addition of water to the carbonyl group but also it allowed obtaining single crystals. Single crystals of the gem-diol and the hemiacetal forms 2-imidazolecarboxaldehyde and N-methyl-2-imidazolecarboxaldehyde, respectively, were isolated and studied through 1H ss-NMR. Mass spectrometry and solution-state NMR experiments were also performed to study the hydration process.

gem-Diol and Hemiacetal Forms in Formylpyridine and Vitamin-B6-Related Compounds: Solid-State NMR and Single-Crystal X-ray Diffraction Studies.

The gem-diol moieties of organic compounds are rarely isolated or even studied in the solid state. Here, liquid- and solid-state NMR, together with single-crystal X-ray diffraction studies, were used to show different strategies to favor the gem-diol or carbonyl moieties and to isolate hemiacetal structures in formylpyridine and vitamin-B6-related compounds. The change in position of the carbonyl group in pyridine compounds had a clear and direct effect on the hydration, which was enhanced by trifluoroacetic acid addition. Because of their biochemical importance, vitamin-B6-related compounds were studied with emphasis on the elucidation of the gem-diol, cyclic hemiacetal or carbonyl structures that can be obtained in different experimental conditions. In particular, new racemic mixtures for the cyclic hemiacetal structure from pyridoxal are reported in trifluoroacetate and hydrochloride derivatives.

Spatially Resolved Monitoring of Drying of Hierarchical Porous Organic Networks.

Evaporation kinetics of water confined in hierarchal polymeric porous media is studied by low field nuclear magnetic resonance (NMR). Systems synthesized with various degrees of cross-linker density render networks with similar pore sizes but different response when soaked with water. Polymeric networks with low percentage of cross-linker can undergo swelling, which affects the porosity as well as the drying kinetics. The drying process is monitored macroscopically by single-sided NMR, with spatial resolution of 100 µm, while microscopic information is obtained by measurements of spin-spin relaxation times (T2). Transition from a funicular to a pendular regime, where hydraulic connectivity is lost and the capillary flow cannot compensate for the surface evaporation, can be observed from inspection of the water content in different sample layers. Relaxation measurements indicate that even when the larger pore structures are depleted of water, capillary flow occurs through smaller voids.

Dissolution properties, solid-state transformation and polymorphic crystallization: progesterone case study.

Progesterone is a natural steroid hormone and a poor soluble drug which presents two polymorphs (forms 1 and 2). Different methods to obtain form 2 were tested and a complete solid-state characterization of both polymorphs (forms 1 and 2) was conducted. X-ray powder diffraction, hot stage microscopy, Fourier transform infrared, dispersive Raman, (13)C solid-state nuclear magnetic resonance spectroscopy, thermal analysis, scanning electron microscopy techniques and intrinsic dissolution rates (IDR) were applied to investigate physical-chemical and dissolution properties of these two polymorphs. Form 2 was obtained from diluted solutions and from melting after cooling at room temperature. Form 1 was obtained from concentrated solutions and, a mixture of both polymorphs was crystallized from intermediate solutions. The crystal habit was not a distinctive characteristic of each polymorph. The effect of mechanical stress was evaluated in the metastable polymorph (form 2). We observed that grinding form 2 produced seeds of form 1 that induced the transformation of form 2 into form 1 at high temperature. The polymorphic quantification from XRD patterns of ground samples were carried out by the Rietveld method. After grinding and at room temperature conditions (∼25 °C), it was observed the transformation of 17% of form 2 into form 1 in 10 days.

Single crystal structure, solid state characterization and dissolution rate of terbinafine hydrochloride.

Terbinafine hydrochloride (TH), a poorly water soluble antifungal agent, was characterized by solid state techniques including differential scanning calorimetry, thermogravimetry, X-ray powder diffraction, optical and electron microscopies, Fourier transform infrared, Raman and solid-state nuclear magnetic resonance spectroscopies and intrinsic dissolution rate (IDR). A colorless single crystal of TH was grown from an ethanol:water solution and its crystalline structure was determined through X-ray single crystal diffraction. Also, a new crystal habit of TH was obtained through the slow solvent evaporation technique revealing a needle-like shape. A comparison between the IDR results for the TH raw material and TH needle-like crystal revealed lower values for the new crystal habit, which can be attributed to the preferential orientation of the crystals in the compressed disks.