Simultaneous automatic segmentation of multiple needles using 3D ultrasound for high-dose-rate prostate brachytherapy.

PURPOSE: Sagittally reconstructed 3D (SR3D) ultrasound imaging shows promise for improved needle localization for high-dose-rate prostate brachytherapy (HDR-BT); however, needles must be manually segmented intraoperatively while the patient is anesthetized to create a treatment plan. The purpose of this article was to describe and validate an automatic needle segmentation algorithm designed for HDR-BT, specifically capable of simultaneously segmenting all needles in an HDR-BT implant using a single SR3D image with ~5 mm interneedle spacing. MATERIALS AND METHODS: The segmentation algorithm involves regularized feature point classification and line trajectory identification based on the randomized 3D Hough transform modified to handle multiple straight needles in a single image simultaneously. Needle tips are identified based on peaks in the derivative of the signal intensity profile along the needle trajectory. For algorithm validation, 12 prostate cancer patients underwent HDR-BT during which SR3D images were acquired with all needles in place. Needles present in each of the 12 images were segmented manually, providing a gold standard for comparison, and using the algorithm. Tip errors were assessed in terms of the 3D Euclidean distance between needle tips, and trajectory error was assessed in terms of 2D distance in the axial plane and angular deviation between trajectories. RESULTS: In total, 190 needles were investigated. Mean execution time of the algorithm was 11.0 s per patient, or 0.7 s per needle. The algorithm identified 82% and 85% of needle tips with 3D errors ≤3 mm and ≤5 mm, respectively, 91% of needle trajectories with 2D errors in the axial plane ≤3 mm, and 83% of needle trajectories with angular errors ≤3°. The largest tip error component was in the needle insertion direction. CONCLUSIONS: Previous work has indicated HDR-BT needles may be manually segmented using SR3D images with insertion depth errors ≤3 mm and ≤5 mm for 83% and 92% of needles, respectively. The algorithm shows promise for reducing the time required for the segmentation of straight HDR-BT needles, and future work involves improving needle tip localization performance through improved image quality and modeling curvilinear trajectories.

Three-dimensional transrectal ultrasound guided high-dose-rate prostate brachytherapy: A comparison of needle segmentation accuracy with two-dimensional image guidance.

PURPOSE: Conventional transrectal ultrasound guided high-dose-rate prostate brachytherapy (HDR-BT) uses an axially acquired image set for organ segmentation and 2D sagittal images for needle segmentation. Sagittally reconstructed 3D (SR3D) transrectal ultrasound enables both organ and needle segmentation and has the potential to reduce organ-needle alignment uncertainty. This study compares the accuracy of needle tip localization between the conventional 2D sagittally assisted axially reconstructed (SAAR) and SR3D approaches. METHODS AND MATERIALS: Twelve patients underwent SAAR-guided HDR-BT, during which SR3D images were acquired for subsequent segmentation and analysis. A total of 183 needles were investigated. Needle end-length measurements were taken, providing a gold standard for insertion depths. Dosimetric impact of insertion depth errors (IDEs) on clinical treatment plans was assessed. RESULTS: SR3D guidance provided statistically significantly smaller IDEs than SAAR guidance with a mean ± SD of -0.6 ± 3.2 mm and 2.8 ± 3.2 mm, respectively (p < 0.001). Shadow artifacts were found to obstruct the view of some needle tips in SR3D images either partially (12%) or fully (10%); however, SR3D IDEs had a statistically significantly smaller impact on prostate V100% than SAAR IDEs with mean ± SD decreases of -1.2 ± 1.3% and -6.5 ± 6.7%, respectively (p < 0.05). CONCLUSIONS: SR3D-guided HDR-BT eliminates a source of systematic uncertainty from the SAAR-guided approach, providing decreased IDEs for most needles, leading to a significant decrease in dosimetric uncertainty. Although imaging artifacts can limit the accuracy of tip localization in a subset of needles, we identified a method to mitigate these artifacts for clinical implementation.

Validation of a novel robot-assisted 3DUS system for real-time planning and guidance of breast interstitial HDR brachytherapy.

PURPOSE: In current clinical practice, there is no integrated 3D ultrasound (3DUS) guidance system clinically available for breast brachytherapy. In this study, the authors present a novel robot-assisted 3DUS system for real-time planning and guidance of breast interstitial high dose rate (HDR) brachytherapy treatment. METHODS: For this work, a new computer controlled robotic 3DUS system was built to perform a hybrid motion scan, which is a combination of a 6 cm linear translation with a 30° rotation at both ends. The new 3DUS scanner was designed to fit on a modified Kuske assembly, keeping the current template grid configuration but modifying the frame to allow the mounting of the 3DUS system at several positions. A finer grid was also tested. A user interface was developed to perform image reconstruction, semiautomatic segmentation of the surgical bed as well as catheter reconstruction and tracking. A 3D string phantom was used to validate the geometric accuracy of the reconstruction. The volumetric accuracy of the system was validated with phantoms using magnetic resonance imaging (MRI) and computed tomography (CT) images. In order to accurately determine whether 3DUS can effectively replace CT for treatment planning, the authors have compared the 3DUS catheter reconstruction to the one obtained from CT images. In addition, in agarose-based phantoms, an end-to-end procedure was performed by executing six independent complete procedures with both 14 and 16 catheters, and for both standard and finer Kuske grids. Finally, in phantoms, five end-to-end procedures were performed with the final CT planning for the validation of 3DUS preplanning. RESULTS: The 3DUS acquisition time is approximately 10 s. A paired Student t-test showed that there was no statistical significant difference between known and measured values of string separations in each direction. Both MRI and CT volume measurements were not statistically different from 3DUS volume (Student t-test: p > 0.05) and they were significantly correlated to 3DUS measurement (Pearson test: MRI p < 0.05 and CT p < 0.001). The mean angular separation distance between catheter trajectories segmented from 3DUS and CT images was 0.42° ± 0.24°, while the maximum and mean trajectory separations were 0.51 ± 0.19 and 0.37 ± 0.17 mm, respectively. Overall, the new finer grid has performed significantly better in terms of dosimetric indices. The planning target volume dosimetric indices were not found statistically different between 3DUS and CT planning (Student t-test, p > 0.05). Both the skin and the pectoral muscle dosimetric indices were within ABS guidelines. CONCLUSIONS: A novel robot-assisted 3DUS system was designed and validated. To their knowledge, this is the first system capable of performing real-time guidance and planning of breast multicatheter HDR brachytherapy treatments. Future investigation will test the feasibility of using the system in the clinic and for permanent breast brachytherapy.

Superior canal dehiscence syndrome: clinical manifestations and radiologic correlations.

The objective of this study is to describe the superior canal dehiscence syndrome (SCDS) and its vestibule-cochlear manifestations, while analyzing dehiscence size, audiogram and vestibular-evoked myogenic potential (VEMP) changes following dehiscence obliteration. We conducted a prospective study in a tertiary referral center. All Patients diagnosed and surgically treated for SCDS were operated through a middle fossa craniotomy (MFC). Clinical and radiological data were collected. The main outcome measures were Air-bone gaps, Pure-tone average (PTA), speech discrimination scores (SDS) and VEMP thresholds and were correlated to dehiscence size. 28 patients were included in this study with a mean dehiscence size of 4.68 mm. Phonophobia and imbalance were the most debilitating cochlear and vestibular symptoms, respectively. At 2 months postoperatively, low-frequency air-bone gaps showed a statistically significant improvement (p < 0.001). SDS and PTA did not show any statistically significant changes 2 months postoperatively (p = 0.282 and p = 0.295, respectively). VEMP threshold differences between operated and contralateral ears were statistically significant preoperatively (p < 0.001) and non-significant 2 months postoperatively (p = 0.173). Dehiscence size only showed a statistically significant correlation with preoperative total cochlear symptoms, while remaining insignificant with all other variables measured. Air-bone gaps, VEMP and computerized tomography remain essential tools in diagnosing and following SCDS. Dehiscence size is an independent factor in the analysis of SCDS, with cochlear symptomatology being associated to dehiscence sizes. Finally, it is shown that overall symptomatology, audiometric results and VEMP thresholds return to normal values post-obliteration, confirming the continuing success of the MFC approach for SCDS obliteration.

Prostate: registration of digital histopathologic images to in vivo MR images acquired by using endorectal receive coil.

PURPOSE: To develop and evaluate a technique for the registration of in vivo prostate magnetic resonance (MR) images to digital histopathologic images by using image-guided specimen slicing based on strand-shaped fiducial markers relating specimen imaging to histopathologic examination. MATERIALS AND METHODS: The study was approved by the institutional review board (the University of Western Ontario Health Sciences Research Ethics Board, London, Ontario, Canada), and written informed consent was obtained from all patients. This work proposed and evaluated a technique utilizing developed fiducial markers and real-time three-dimensional visualization in support of image guidance for ex vivo prostate specimen slicing parallel to the MR imaging planes prior to digitization, simplifying the registration process. Means, standard deviations, root-mean-square errors, and 95% confidence intervals are reported for all evaluated measurements. RESULTS: The slicing error was within the 2.2 mm thickness of the diagnostic-quality MR imaging sections, with a tissue block thickness standard deviation of 0.2 mm. Rigid registration provided negligible postregistration overlap of the smallest clinically important tumors (0.2 cm(3)) at histologic examination and MR imaging, whereas the tested nonrigid registration method yielded a mean target registration error of 1.1 mm and provided useful coregistration of such tumors. CONCLUSION: This method for the registration of prostate digital histopathologic images to in vivo MR images acquired by using an endorectal receive coil was sufficiently accurate for coregistering the smallest clinically important lesions with 95% confidence.

A compact mechatronic system for 3D ultrasound guided prostate interventions.

PURPOSE: Ultrasound imaging has improved the treatment of prostate cancer by producing increasingly higher quality images and influencing sophisticated targeting procedures for the insertion of radioactive seeds during brachytherapy. However, it is critical that the needles be placed accurately within the prostate to deliver the therapy to the planned location and avoid complications of damaging surrounding tissues. METHODS: The authors have developed a compact mechatronic system, as well as an effective method for guiding and controlling the insertion of transperineal needles into the prostate. This system has been designed to allow guidance of a needle obliquely in 3D space into the prostate, thereby reducing pubic arch interference. The choice of needle trajectory and location in the prostate can be adjusted manually or with computer control. RESULTS: To validate the system, a series of experiments were performed on phantoms. The 3D scan of the string phantom produced minimal geometric error, which was less than 0.4 mm. Needle guidance accuracy tests in agar prostate phantoms showed that the mean error of bead placement was less then 1.6 mm along parallel needle paths that were within 1.2 mm of the intended target and 1 degree from the preplanned trajectory. At oblique angles of up to 15 degrees relative to the probe axis, beads were placed to within 3.0 mm along a trajectory that were within 2.0 mm of the target with an angular error less than 2 degrees. CONCLUSIONS: By combining 3D TRUS imaging system to a needle tracking linkage, this system should improve the physician's ability to target and accurately guide a needle to selected targets without the need for the computer to directly manipulate and insert the needle. This would be beneficial as the physician has complete control of the system and can safely maneuver the needle guide around obstacles such as previously placed needles.

Evaluation of inter-session 3D-TRUS to 3D-TRUS image registration for repeat prostate biopsies.

To ensure accurate targeting and repeatability, 3D TRUS-guided biopsies require registration to determine coordinate transformations to (1) incorporate pre-procedure biopsy plans and (2) compensate for inter-session prostate motion and deformation between repeat biopsy sessions. We evaluated prostate surface- and image-based 3D-to-3D TRUS registration by measuring the TRE of manually marked, corresponding, intrinsic fiducials in the whole gland and peripheral zone, and also evaluated the error anisotropy. The image-based rigid and non-rigid methods yielded the best results with mean TREs of 2.26 mm and 1.96 mm, respectively. These results compare favorably with a clinical need for an error of less than 2.5 mm.

Mechanically assisted 3D ultrasound guided prostate biopsy system.

There are currently limitations associated with the prostate biopsy procedure, which is the most commonly used method for a definitive diagnosis of prostate cancer. With the use of two-dimensional (2D) transrectal ultrasound (TRUS) for needle-guidance in this procedure, the physician has restricted anatomical reference points for guiding the needle to target sites. Further, any motion of the physician's hand during the procedure may cause the prostate to move or deform to a prohibitive extent. These variations make it difficult to establish a consistent reference frame for guiding a needle. We have developed a 3D navigation system for prostate biopsy, which addresses these shortcomings. This system is composed of a 3D US imaging subsystem and a passive mechanical arm to minimize prostate motion. To validate our prototype, a series of experiments were performed on prostate phantoms. The 3D scan of the string phantom produced minimal geometric distortions, and the geometric error of the 3D imaging subsystem was 0.37 mm. The accuracy of 3D prostate segmentation was determined by comparing the known volume in a certified phantom to a reconstructed volume generated by our system and was shown to estimate the volume with less then 5% error. Biopsy needle guidance accuracy tests in agar prostate phantoms showed that the mean error was 2.1 mm and the 3D location of the biopsy core was recorded with a mean error of 1.8 mm. In this paper, we describe the mechanical design and validation of the prototype system using an in vitro prostate phantom. Preliminary results from an ongoing clinical trial show that prostate motion is small with an in-plane displacement of less than 1 mm during the biopsy procedure.