Biocompatible Cu/NiMo Composite Electrocatalyst for Hydrogen Evolution Reaction in Microbial Electrosynthesis; Unveiling the Self-Detoxification Effect of Cu.

H2-driven microbial electrosynthesis (MES) is an emerging bioelectrochemical technology that enables the production of complex compounds from CO2. Although the performance of microbial fermentation in the MES system is closely related to the H2 production rate, high-performing metallic H2-evolving catalysts (HEC) generate cytotoxic H2O2 and metal cations from undesirable side reactions, severely damaging microorganisms. Herein, a novel design for self-detoxifying metallic HEC, resulting in biologically benign H2 production, is reported. Cu/NiMo composite HEC suppresses H2O2 evolution by altering the O2 reduction kinetics to a four-electron pathway and subsequently decomposes the inevitably generated H2O2 in sequential catalytic and electrochemical pathways. Furthermore, in situ generated Cu-rich layer at the surface prevents NiMo from corroding and releasing cytotoxic Ni cations. Consequently, the Cu/NiMo composite HEC in the MES system registers a 50% increase in the performance of lithoautotrophic bacterium Cupriavidus necator H16, for the conversion of CO2 to a biopolymer, poly(3-hydroxybutyrate). This work successfully demonstrates the concept of self-detoxification in designing biocompatible materials for bioelectrochemical applications as well as MES systems.

Strain-Induced Metallization and Defect Suppression at Zipper-like Interdigitated Atomically Thin Interfaces Enabling High-Efficiency Halide Perovskite Solar Cells.

Halide perovskite light absorbers have great advantages for photovoltaics such as efficient solar energy absorption, but charge accumulation and recombination at the interface with an electron transport layer (ETL) remain major challenges in realizing the absorbers' full potential. Here we report the experimental realization of a zipper-like interdigitated interface between a Pb-based halide perovskite light absorber and an oxide ETL by the PbO capping of the ETL surface, which produces an atomically thin two-dimensional metallic layer that can significantly enhance the perovskite/ETL charge extraction process. As the atomistic origin of the emergent two-dimensional interfacial metallicity, first-principles calculations performed on the representative MAPbI3/TiO2 interface identify the interfacial strain induced by the simultaneous formation of stretched I-substitutional Pb bonds (and thus Pb-I-Pb bonds bridging MAPbI3 and TiO2) and contracted substitutional Pb-O bonds. Direct and indirect experimental evidence for the presence of interfacial metallic states are provided, and a nonconventional defect-passivating nature of the strained interdigitated perovskite/ETL interface is emphasized. It is experimentally demonstrated that the PbO capping method is generally applicable to other ETL materials, including ZnO and SrTiO3, and that the zipper-like interdigitated metallic interface leads to about a 2-fold increase in the charge extraction rate. Finally, in terms of the photovoltaic efficiency, we observe a volcano-type behavior with the highest performance achieved at the monolayer-level PbO capping. This work establishes a general perovskite/ETL interface engineering approach to realize high-performance perovskite solar cells.

Autogenous Production and Stabilization of Highly Loaded Sub-Nanometric Particles within Multishell Hollow Metal-Organic Frameworks and Their Utilization for High Performance in Li-O2 Batteries.

Sub-nanometric particles (SNPs) of atomic cluster sizes have shown great promise in many fields such as full atom-to-atom utilization, but their precise production and stabilization at high mass loadings remain a great challenge. As a solution to overcome this challenge, a strategy allowing synthesis and preservation of SNPs at high mass loadings within multishell hollow metal-organic frameworks (MOFs) is demonstrated. First, alternating water-decomposable and water-stable MOFs are stacked in succession to build multilayer MOFs. Next, using controlled hydrogen bonding affinity, isolated water molecules are selectively sieved through the hydrophobic nanocages of water-stable MOFs and transferred one by one to water-decomposable MOFs. The transmission of water molecules via controlled hydrogen bonding affinity through the water-stable MOF layers is a key step to realize SNPs from various types of alternating water-decomposable and water-stable layers. This process transforms multilayer MOFs into SNP-embedded multishell hollow MOFs. Additionally, the multishell stabilizes SNPs by π-backbonding allowing high conductivity to be achieved via the hopping mechanism, and hollow interspaces minimize transport resistance. These features, as demonstrated using SNP-embedded multishell hollow MOFs with up to five shells, lead to high electrochemical performances including high volumetric capacities and low overpotentials in Li-O2 batteries.

Cobalt-Phosphate Catalysts with Reduced Bivalent Co-Ion States and Doped Nitrogen Atoms Playing as Active Sites for Facile Adsorption, Fast Charge Transfer, and Robust Stability in Photoelectrochemical Water Oxidation.

A cobalt-phosphate (Co-Pi) catalyst having octahedral CoO6 molecular units as reaction sites is a key component in photoelectrochemical (PEC) water oxidation systems, but its limited adsorption sites for oxygen-evolving intermediates (*OH, *OOH), slow charge transfer rates, and fast degradation of reaction sites are yet to be overcome. Here, we report that Co-Pi nanoparticles with low-coordinate Co ions and doped nitrogen atoms could be decorated on hematite nanorod arrays to form N-CoPi/hematite composites. Moreover, the local atomic configuration and bond distance studies show that trivalent Co3+ states are partially reduced through nitrogen radicals in the plasma to low-coordinate bivalent Co2+ states playing as the facile adsorption sites of oxygen-evolving intermediates due to the decreased activation barrier for water oxidation. Electron transport is also reinforced by nitrogen species due to the formation of hybridizing N 2p orbitals that give the acceptor levels in the bandgap. As a result, both the incident photon-to-electron conversion efficiency and the charge transfer resistance on N-CoPi/hematite outperform those on a bare hematite by about 3 fold. Furthermore, N-CoPi/hematite gives high activity retention over 90% after the long operation of water oxidation, in support of the reaction sites on N-CoPi not degrading during the successive water oxidation.

Ultrafine Metallic Nickel Domains and Reduced Molybdenum States Improve Oxygen Evolution Reaction of NiFeMo Electrocatalysts.

An electrocatalyst for oxygen evolution reaction (OER) is essential in the realization of renewable energy conversion technologies, but its large overpotential, slow charge transfer, and degradation of surface reaction sites are yet to be overcome. Here, it is found that the metallic nickel domains and high-valence reduced molybdenum ions of NiFeMo electrocatalysts grown on a 3D conductive and porous electrode without using binders enable ultrahigh performance in OER. High resolution-transmission electron microscope and extended X-ray absorption fine structure analyses show that metallic nickel domains with Ni-Ni bonds are generated on the catalyst surface via a dry synthesis using nitrogen plasma. Also, Mo K-edge X-ray absorption near-edge spectroscopy reveals that Mo6+ ions are reduced into high-valence modulating Mo4+ ions. With the metallic nickel domains facilitating the adsorption of oxygen intermediates to low-coordinated Ni0 and the Mo4+ pulling their electrons, the catalyst exhibits about 60-fold higher activity than a Mo-free NiFe catalyst, while giving about threefold faster charge transfer along with longer stability over 100 h and repeated 100 cycles compared to a bare NiFeMo catalyst. Additionally, these metallic domains and high-valence modulating metal ions are exhibited to give high Faradaic efficiency over 95%.

Size-controlled CdSe quantum dots to boost light harvesting capability and stability of perovskite photovoltaic cells.

Here, we report that incorporation of size-controlled CdSe quantum dots (QDs) into perovskite photovoltaic cells (PSCs) boosts their light harvesting capability. X-ray photoemission and optical absorption spectroscopy analyses also show that the electronic structure of CdSe QDs makes them efficient charge transfer mediators between perovskite and Spiro-MeOTAD layers. In addition, electrochemical impedance spectroscopy experiments demonstrate that QDs help to decrease charge transfer resistance at the interfaces. Additionally, time-correlated single photon counting measurements show that small (2 nm) QDs enhance visible light collection of PSCs in the short wavelength region via Förster resonance energy transfer while large (4 nm) QDs improve light collection of PSCs in the long wavelength region via enhanced light backscattering at the perovskite/QD interface. Moreover, the photocurrent density in the PSCs with QDs retained over 95% of the initial value in a 100 h stability test, thus supporting that the perovskite layer that has been encapsulated with QDs acts to prevent penetration of water molecules through the perovskite layer. Consequently, these results support that utilization of size-controlled hybrid QDs could open up a new route to realize high-performance PSCs even under humid conditions.

Broadband Light Absorption and Efficient Charge Separation Using a Light Scattering Layer with Mixed Cavities for High-Performance Perovskite Photovoltaic Cells with Stability.

CH3 NH3 PbI3 is one of the promising light sensitizers for perovskite photovoltaic cells, but a thick layer is required to enhance light absorption in the long-wavelength regime ranging from PbI2 absorption edge (500 nm) to its optical band-gap edge (780 nm) in visible light. Meanwhile, the thick perovskite layer suppresses visible-light absorption in the short wavelengths below 500 nm and charge extraction capability of electron-hole pairs produced upon light absorption. Herein, we find that a new light scattering layer with the mixed cavities of sizes in 100 and 200 nm between transparent fluorine-doped tin oxide and mesoporous titanium dioxide electron transport layer enables full absorption of short-wavelength photons (λ < 500 nm) to the perovskite along with enhanced absorption of long-wavelength photons (500 nm < λ < 780 nm). Moreover, the light-driven electric field is proven to allow efficient charge extraction upon light absorption, thereby leading to the increased photocurrent density as well as the fill factor prompted by the slow recombination rate. Additionally, the photocurrent density of the cell with a light scattering layer of mixed cavities is stabilized due to suppressed charge accumulation. Consequently, this work provides a new route to realize broadband light harvesting of visible light for high-performance perovskite photovoltaic cells.

Encapsulation of redox polysulphides via chemical interaction with nitrogen atoms in the organic linkers of metal-organic framework nanocrystals.

Lithium polysulphides generated during discharge in the cathode of a lithium-sulphur redox cell are important, but their dissolution into the electrolyte from the cathode during each redox cycle leads to a shortened cycle life. Herein, we use in situ spectroelectrochemical measurements to demonstrate that sp(2) nitrogen atoms in the organic linkers of nanocrystalline metal-organic framework-867 (nMOF-867) are able to encapsulate lithium polysulphides inside the microcages of nMOF-867, thus helping to prevent their dissolution into the electrolyte during discharge/charge cycles. This encapsulation mechanism of lithiated/delithiated polysulphides was further confirmed by observations of shifted FTIR spectra for the C = N and C-N bonds, the XPS spectra for the Li-N bonds from nMOF-867, and a visualization method, demonstrating that nMOF-867 prevents lithium polysulphides from being dissolved in the electrolyte. Indeed, a cathode fabricated using nMOF-867 exhibited excellent capacity retention over a long cycle life of 500 discharge/charge cycles, with a capacity loss of approximately 0.027% per cycle from a discharge capacity of 788 mAh/g at a high current rate of 835 mA/g.