ABSTRACT
Silicon (Si) nano-electronics is advancing towards the end of the Moore's Law, as gate lengths of just a few nanometers have been already reported in state-of-the-art transistors. In the nanostructures that act as channels in transistors or depletion layers in pn diodes, the role of dopants becomes critical, since the transport properties depend on a small number of dopants and/or on their random distribution. Here, we present the possibility of single-charge tunneling in codoped Si nanodevices formed in silicon-on-insulator films, in which both phosphorus (P) donors and boron (B) acceptors are introduced intentionally. For highly doped pn diodes, we report band-to-band tunneling (BTBT) via energy states in the depletion layer. These energy states can be ascribed to quantum dots (QDs) formed by the random distribution of donors and acceptors in such a depletion layer. For nanoscale silicon-on-insulator field-effect transistors (SOI-FETs) doped heavily with P-donors and also counter-doped with B-acceptors, we report current peaks and Coulomb diamonds. These features are ascribed to single-electron tunneling (SET) via QDs in the codoped nanoscale channels. These reports provide new insights for utilizing codoped silicon nanostructures for fundamental applications, in which the interplay between donors and acceptors can enhance the functionalities of the devices.
ABSTRACT
Microlens arrays (MLAs) which are increasingly popular micro-optical elements in compact integrated optical systems were fabricated using a femtosecond direct laser write (fs-DLW) technique in the low-shrinkage SZ2080TM photoresist. High-fidelity definition of 3D surfaces on IR transparent CaF2 substrates allowed to achieve â¼50% transmittance in the chemical fingerprinting spectral region 2-5 µm wavelengths since MLAs were only â¼10 µm high corresponding to the numerical aperture of 0.3 (the lens height is comparable with the IR wavelength). To combine diffractive and refractive capabilities in miniaturised optical setup, a graphene oxide (GO) grating acting as a linear polariser was also fabricated by fs-DLW by ablation of a 1 µm-thick GO thin film. Such an ultra-thin GO polariser can be integrated with the fabricated MLA to add dispersion control at the focal plane. Pairs of MLAs and GO polarisers were characterised throughout the visible-IR spectral window and numerical modelling was used to simulate their performance. A good match between the experimental results of MLA focusing and simulations was achieved.
ABSTRACT
Herein, we give an overview of several less explored structural and optical characterization techniques useful for biomaterials. New insights into the structure of natural fibers such as spider silk can be gained with minimal sample preparation. Electromagnetic radiation (EMR) over a broad range of wavelengths (from X-ray to THz) provides information of the structure of the material at correspondingly different length scales (nm-to-mm). When the sample features, such as the alignment of certain fibers, cannot be characterized optically, polarization analysis of the optical images can provide further information on feature alignment. The 3D complexity of biological samples necessitates that there be feature measurements and characterization over a large range of length scales. We discuss the issue of characterizing complex shapes by analysis of the link between the color and structure of spider scales and silk. For example, it is shown that the green-blue color of a spider scale is dominated by the chitin slab's Fabry-Pérot-type reflectivity rather than the surface nanostructure. The use of a chromaticity plot simplifies complex spectra and enables quantification of the apparent colors. All the experimental data presented herein are used to support the discussion on the structure-color link in the characterization of materials.
ABSTRACT
Current-voltage characteristics of a quantum dot in double-barrier configuration, as formed in the nanoscale channel of silicon transistors, were analyzed both experimentally and theoretically. Single electron transistors (SET) made in a SOI-FET configuration using silicon quantum dot as well as phosphorus donor quantum dots were experimentally investigated. These devices exhibited a quantum Coulomb blockade phenomenon along with a detectable effect of variable tunnel barriers. To replicate the experimental results, we developed a generalized formalism for the tunnel-barrier dependent quantum Coulomb blockade by modifying the rate-equation approach. We qualitatively replicate the experimental results with numerical calculation using this formalism for two and three energy levels participated in the tunneling transport. The new formalism supports the features of most of the small-scaled SET devices.
ABSTRACT
Carbon nanotubes (CNTs) are ultimately small structures, attractive for future nanoelectronics. CNT-bundles on Si nanostructures can offer an alternative pathway to build hybrid CMOS-compatible devices. To develop a simple method of using such CNT-bundles as transistor channels, we fabricated semiconductor single-walled CNT field-effect transistors using inkjet printing on a CMOS-compatible platform. We investigated a method of producing stable CNT solutions without surfactants, allowing for CNT debundling and dispersion. An inkjet-printing system disperses CNT-networks with ultimately low density (down to discrete CNT-bundles) in Al source-drain gaps of transistors. Despite the small number of networks and random positions, such CNT-bundles provide paths to the flow current. For enhanced controllability, we also demonstrate the manipulation of CNT-networks using an AFM technique.
ABSTRACT
Current enhancement without increasing the input power is a critical issue to be pursued for electronic circuits. However, drivability of metal-oxide-semiconductor (MOS) transistors is limited by the source-injection current, and electrons that have passed through the source unavoidably waste their momentum to the phonon bath. Here, we propose the Si electron-aspirator, a nanometer-scaled MOS device with a T-shaped branch, to go beyond this limit. The device utilizes the hydrodynamic nature of electrons due to the electron-electron scattering, by which the injected hot electrons transfer their momentum to cold electrons before they relax with the phonon bath. This momentum transfer induces an electron flow from the grounded side terminal without additional power sources. The operation is demonstrated by observing the output-current enhancement by a factor of about 3 at 8 K, which reveals that the electron-electron scattering can govern the electron transport in nanometer-scaled MOS devices, and increase their effective drivability.
ABSTRACT
Control of coupling of dopant atoms in silicon nanostructures is a fundamental challenge for dopant-based applications. However, it is difficult to find systems of only a few dopants that can be directly addressed and, therefore, experimental demonstration has not yet been obtained. In this work, we identify pairs of donor atoms in the nano-channel of a silicon field-effect transistor and demonstrate merging of the donor-induced potential wells at the interface by applying vertical electric field. This system can be described as an interfacial double-donor molecule. Single-electron tunneling current is used to probe the modification of the potential well. When merging occurs at the interface, the gate capacitance of the potential well suddenly increases, leading to an abrupt shift of the tunneling current peak to lower gate voltages. This is due to the decrease of the system's charging energy, as confirmed by Coulomb blockade simulations. These results represent the first experimental observation of electric-field-assisted formation of an interfacial double-donor molecule, opening a pathway for designing functional devices using multiple coupled dopant atoms.
ABSTRACT
Following the rapid development of the electronics industry and technology, it is expected that future electronic devices will operate based on functional units at the level of electrically active molecules or even atoms. One pathway to observe and characterize such fundamental operation is to focus on identifying isolated or coupled dopants in nanoscale silicon transistors, the building blocks of present electronics. Here, we review some of the recent progress in the research along this direction, with a focus on devices fabricated with simple and CMOS-compatible-processing technology. We present results from a scanning probe method (Kelvin probe force microscopy) which show direct observation of dopant-induced potential modulations. We also discuss tunneling transport behavior based on the analysis of low-temperature I-V characteristics for devices representative for different regimes of doping concentration, i.e., different inter-dopant coupling strengths. This overview outlines the present status of the field, opening also directions toward practical implementation of dopant-atom devices.
ABSTRACT
The impact of dopant atoms in transistor functionality has significantly changed over the past few decades. In downscaled transistors, discrete dopants with uncontrolled positions and number induce fluctuations in device operation. On the other hand, by gaining access to tunneling through individual dopants, a new type of devices is developed: dopant-atom-based transistors. So far, most studies report transport through dopants randomly located in the channel. However, for practical applications, it is critical to control the location of the donors with simple techniques. Here, we fabricate silicon transistors with selectively nanoscale-doped channels using nano-lithography and thermal-diffusion doping processes. Coupled phosphorus donors form a quantum dot with the ground state split into a number of levels practically equal to the number of coupled donors, when the number of donors is small. Tunneling-transport spectroscopy reveals fine features which can be correlated with the different numbers of donors inside the quantum dot, as also suggested by first-principles simulation results.
ABSTRACT
Silicon field-effect transistors have now reached gate lengths of only a few tens of nanometers, containing a countable number of dopants in the channel. Such technological trend brought us to a research stage on devices working with one or a few dopant atoms. In this work, we review our most recent studies on key atom devices with fundamental structures of silicon-on-insulator MOSFETs, such as single-dopant transistors, preliminary memory devices, single-electron turnstile devices and photonic devices, in which electron tunneling mediated by single dopant atoms is the essential transport mechanism. Furthermore, observation of individual dopant potential in the channel by Kelvin probe force microscopy is also presented. These results may pave the way for the development of a new device technology, i.e., single-dopant atom electronics.
ABSTRACT
We show that single-electron transport through a single dopant can be achieved even in a random background of many dopants without any precise placement of individual dopants. First, we observe potential maps of a phosphorus-doped channel by low-temperature Kelvin probe force microscopy, and demonstrate potential changes due to single-electron trapping in single dopants. We then show that only one or a small number of dopants dominate the initial stage of source-drain current vs gate voltage characteristics in scaled-down, doped-channel, field-effect transistors.