Oxidative potential of the inhalation bioaccessible fraction of PM10 and bioaccessible concentrations of polycyclic aromatic hydrocarbons and metal(oid)s in PM10.

Atmospheric particulate matter (PM) has been related to numerous adverse health effects in humans. Nowadays, it is believed that one of the possible mechanisms of toxicity could be the oxidative stress, which involves the development of reactive oxygen species (ROS). Different assays have been proposed to characterize oxidative stress, such as dithiothreitol (DTT) and ascorbic acid (AA) acellular assays (OPDTT and OPAA), as a metric more relevant than PM mass measurement for PM toxicity. This study evaluates the OP of the bioaccessible fraction of 65 PM10 samples collected at an Atlantic Coastal European urban site using DTT and AA assays. A physiologically based extraction (PBET) using Gamble's solution (GS) as a simulated lung fluid (SLF) was used for the assessment of the bioaccessible fraction of PM10. The use of the bioaccessible fraction, instead of the fraction assessed using conventional phosphate buffer and ultrasounds assisted extraction (UAE), was compared for OP assessment. Correlations between OPDTT and OPAA, as well as total and bioaccessible concentrations of polycyclic aromatic hydrocarbons (PAHs) and metal(oid)s, were investigated to explore the association between those compounds and OP. A correlation was found between both OP (OPDTT and OPAA) and total and bioaccessible concentrations of PAHs and several metal(oid)s such as As, Bi, Cd, Cu, Ni, and V. Additionally, OPDTT was found to be related to the level of K+.

A multi-residue method for the analysis of organic pollutants released from atmospheric PM2.5 in simulated biological fluids: Inhalation bioaccessibility and bioavailability estimation.

BACKGROUND: In recent decades, there has been a growing interest within the scientific community regarding the study of the fraction that could be released in simulated biological fluids to estimate in vitro bioaccessibility and bioavailability of compounds. Concerning particulate matter (PM), studies were essentially focused on metal (oid)s probably due to more complex methodologies needed for organic compounds, requiring extraction and pre-concentration steps from simulated fluids, followed by chromatographic analysis. Thus, the development of a simple and sensitive methodology for the analysis of multi-class organic compounds released in different inhalation simulated fluids would represent a great contribution to the field. RESULTS: In this work, a methodology for the analysis of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols released in simulated fluids from PM2.5 samples was developed. After a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) and a simulated body fluid (SBF, filling a dialysis membrane) to obtain in vitro inhalation bioaccessible and bioavailable fractions, respectively; compounds were determined by a vortex-assisted liquid-liquid extraction (VALLE) and a subsequent analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). Experimental conditions concerning VALLE extraction (extraction time and amount of NaCl (g)) were optimized by using a central composite design (CCD), best MS/MS transitions were selected and matrix-matched calibration combined with use of labelled subrogate standards provided high sensitivity, minimization of matrix effects and recovering losses compensation. SIGNIFICANCE: The successful validation results obtained for most of the compounds demonstrated the effectiveness of the proposed methodology for the analysis of multi-class organic pollutants released in ALF and SBF for inhalation bioaccessibility and bioavailability assessment, respectively. Furthermore, applicability of the method was proved by analysing 20 p.m.2.5 samples, being the proposed in vitro PBET dialyzability approach for assessing organic pollutant's inhalation bioavailability applied to PM2.5 samples for the first time.

Effects of Zinc Oxide Nanoparticle Exposure on Human Glial Cells and Zebrafish Embryos.

Zinc oxide nanoparticles (ZnO NPs) are among the most widely used nanomaterials. They have multiple applications in cosmetics, textiles, paints, electronics and, recently, also in biomedicine. This extensive use of ZnO NPs notably increases the probability that both humans and wildlife are subjected to undesirable effects. Despite being among the most studied NPs from a toxicological point of view, much remains unknown about their ecotoxicological effects or how they may affect specific cell types, such as cells of the central nervous system. The main objective of this work was to investigate the effects of ZnO NPs on human glial cells and zebrafish embryo development and to explore the role of the released Zn2+ ions in these effects. The effects on cell viability on human A172 glial cells were assessed with an MTT assay and morphological analysis. The potential acute and developmental toxicity was assessed employing zebrafish (Danio rerio) embryos. To determine the role of Zn2+ ions in the in vitro and in vivo observed effects, we measured their release from ZnO NPs with flame atomic absorption spectrometry. Then, cells and zebrafish embryos were treated with a water-soluble salt (zinc sulfate) at concentrations that equal the number of Zn2+ ions released by the tested concentrations of ZnO NPs. Exposure to ZnO NPs induced morphological alterations and a significant decrease in cell viability depending on the concentration and duration of treatment, even after removing the overestimation due to NP interference. Although there were no signs of acute toxicity in zebrafish embryos, a decrease in hatching was detected after exposure to the highest ZnO NP concentrations tested. The ability of ZnO NPs to release Zn2+ ions into the medium in a concentration-dependent manner was confirmed. Zn2+ ions did not seem entirely responsible for the effects observed in the glial cells, but they were likely responsible for the decrease in zebrafish hatching rate. The results obtained in this work contribute to the knowledge of the toxicological potential of ZnO NPs.

Organotin compounds in seafood by ultrasonic assisted extraction and gas chromatography-triple quadrupole tandem mass spectrometry.

Although restricting environmental quality values for organotin compounds (OTs) are set by Directive 2013/39/EU of the European Parliament, marine environment remains being affected due to maritime circulation at global scale. Fish and seafood accumulate OTs, making fish and seafood consumption the main source of OTs in humans. Because of the fish and seafood matrices complexity and the required low limits of detection, a robust and fast procedure for the quantification of OTs in fish and seafood, using ultrasound-assisted extraction and gas chromatography-tandem mass spectrometry, was validated and applied. Detection (2.7 µg Sn kg-1) and quantification (8.0 µg Sn kg-1) limits, repeatability and intermediate precision (<10%), accuracy by analysing ERM®-CE477 Mussel Tissue and analytical recoveries (65-122%) were assessed. Multivariate analysis shown that the matrix effect for some OTs displayed good negative correlation with the fat and protein content. Health risk assessment of OTs intake revealed no serious risk for human consumption.

Source apportionment of PM10 and health risk assessment related in a narrow tropical valley. Study case: Metropolitan area of Aburrá Valley (Colombia).

This study investigates spatio-temporal variations of PM10 mass concentrations and associated metal(oid)s, δ13C carbon isotope ratios, polycyclic aromatic hydrocarbons (PAHs), total organic carbon (TOC) and equivalent black carbon (eBC) concentrations over a half year period (from March 2017 to October 2017) in two residential areas of Medellín (MED-1 and MED-2) and Itagüí municipality (ITA-1 and ITA-2) at a tropical narrow valley (Aburrá Valley, Colombia), where few data are available. A total of 104 samples were analysed by using validated analytical methodologies, providing valuable data for PM10 chemical characterisation. Metal(oid)s concentrations were measured by inductively coupled plasma mass spectrometry (ICP-MS) after acid digestion, and PAHs concentrations were measured by Gas Chromatography-Mass Spectrometry (GC-MS) after Pressurised Hot Water Extraction (PHWE) and Membrane Assisted Solvent Extraction (MASE). Mean PM10 mass concentration ranged from 37.0 µg m-3 to 45.7 µg m-3 in ITA-2 and MED-2 sites, respectively. Al, Ca, Mg and Na (from 6249 ng m-3 for Mg at MED-1 site to 10,506 ng m-3 for Ca at MED-2 site) were the major elements in PM10 samples, whilst As, Be, Bi, Co, Cs, Li, Ni, Sb, Se, Tl and V were found at trace levels (< 5.4 ng m-3). Benzo[g,h,i] perylene (BghiP), benzo[b + j]fluoranthene (BbjF) and indene(1,2,3-c,d)pyrene (IcdP) were the most profuse PAHs in PM10 samples, with average concentrations of 0.82-0.86, 0.60-0.78 and 0.47-0.58 ng m-3, respectively. Results observed in the four sampling sites showed a similar dispersion pattern of pollutants, with temporal fluctuations which seems to be associated to the meteorology of the valley. A PM source apportionment study were carried out by using the positive matrix factorization (PMF) model, pointing to re-suspended dust, combustion processes, quarry activity and secondary aerosols as PM10 sources in the study area. Among them, combustion was the major PM10 contribution (accounting from 32.1 to 32.9% in ITA-1 and ITA-2, respectively), followed by secondary aerosols (accounting for 13.2% and 23.3% ITA-1 and MED-1, respectively). Finally, a moderate carcinogenic risk was observed for PM10-bound PAHs exposure via inhalation, whereas significant carcinogenic risk was estimated for carcinogenic metal(oid)s exposure in the area during the sampling period.

In-vitro inhalation bioavailability estimation of Metal(oid)s in atmospheric particulate matter (PM2.5) using simulated alveolar lysosomal fluid: A dialyzability approach.

A novel in-vitro method, by using synthetic body fluids, human physiological conditions and a simulated air-blood barrier (by using a dialysis membrane) has been developed and applied to assess in-vitro inhalation bioavailability of metal(oid)s associated to particulate matter (PM2,5) samples collected from an industrial site of the Northwest of Spain. A validated analytical methodology based on inductively coupled plasma mass spectrometry (ICP-MS) was used to analyse metal(oid)s concentrations in bioavailable fractions. This approach would be a more realistic human health risk assessment since considering processes that occur in human body in contrast the overestimation derived from current models (which consider environmental concentrations). Metal(oid)s such as Cu and Mo seemed to be the most bioavailable (mean in-vitro bioavailability ratios higher than 70%); Ba, Cd, Mn, Pb, Rb, Sb, Sn, V and Zn shown mean ratios between 20 and 60%, while low in-vitro bioavailability ratios (less than 20%) were observed for metal(oid)s such as Al, Co, Cr, Fe, Ni, Ti, and Tl. Health risk assessment via inhalation based on hazard carcinogenic and non-carcinogenic indexes (HIc and HInc, respectively) were performed considering three exposure scenarios using both inhalation bioavailable and total metal(oid)s concentrations in PM2.5 samples, suggesting no risk to human health. The influence of chemical composition on in-vitro bioavailability ratios was obtained, pointing out that inhalation ratios of Al, Ba, Cr, Cu, Fe, Ni, Pb and V seem to be affected by sea salt and/or crustal and/or biogenic and/or anthropogenic content of PM2.5.

Multi-class organic pollutants in atmospheric particulate matter (PM2.5) from a Southwestern Europe industrial area: Levels, sources and human health risk.

The occurrence of 50 multi-class pollutants comprising 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 12 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols was studied in atmospheric particulate matter (PM2.5) samples collected at an industrial area focused on automotive manufacturing located at the Southwestern Atlantic European region (Vigo city, Spain) during 1-year period. Among all quantitated pollutants in PM2.5 samples, bisphenol A (BPA) was the most predominant with an average concentration of 6180 pg m-3, followed by PAHs comprising benzo(b+j)fluoranthene (BbF + BjF) and benzo(g,h,i)perylene (BghiP), accounting for 546 pg m-3 and 413 pg m-3 respectively. In addition, two OPFRs concerning tris(chloropropyl) phosphate (TCPP) and triphenyl phosphine oxide (TPPO) were the next following the concentration order, accounting for 411 pg m-3 and 367 pg m-3 respectively; being butyl benzyl phthalate (BBP) the most profuse PAE (56.1 pg m-3 by average). High relative standard deviations (RSDs) were observed during the whole sampling period, while statistically significant differences were only observed for PAHs concentrations during cold and warm seasons. Furthermore, some water-soluble ions and metal(oid)s were analysed in PM2.5 samples to be used as PM source tracers, whose concentrations were quite below the target levels set in the current legislation. Data obtained from principal component analysis (PCA) and PAHs molecular indices suggested a pyrogenic and petrogenic origin for PAHs, whereas occurrence of the remaining compounds seems to be attributed to resources used in the automotive industrial activity settled in the sampling area. Moreover, although a substantial anthropogenic source to PM2.5 in the area was observed, marine and soil resuspension contributions were also accounted. Finally, carcinogenic and non-carcinogenic risks posed by PM2.5-bound pollutants inhalation were assessed, being both averages within the safe level considering the whole period.

Inhalation bioaccessibility of multi-class organic pollutants associated to atmospheric PM2.5: Correlation with PM2.5 properties and health risk assessment.

Inhalation exposure to fine particulate matter (PM2.5) represents a global concern due to the adverse effects in human health. In the last years, scientific community has been adopted the assessment of the PM2.5-bound pollutant fraction that could be released (bioaccessible fraction) in simulated lung fluids (SLFs) to achieve a better understanding of PM risk assessment and toxicological studies. Thus, bioaccessibility of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols in PM2.5 samples was evaluated. The proposed method consists of a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) to obtain bioaccessible fractions, followed by a vortex-assisted liquid-liquid microextraction (VALLME) and a final analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). The highest inhalation bioaccessibility ratio was found for bisphenol A (BPA) with an average of 83%, followed by OPFRs, PAEs and PAHs (with average bioaccessibilities of 68%, 41% and 34%, respectively). Correlations between PM2.5 composition (major ions, trace metals, equivalent black carbon (eBC) and UV-absorbing particulate matter (UVPM)) and bioaccessibility ratios were also assessed. Principal Component Analysis (PCA) suggested that PAHs, PAES and OPFRs bioaccessibility ratios could be positively correlated with PM2.5 carbonaceous content. Furthermore, both inverse and positive correlations on PAHs, PAEs and OPFRs bioaccessibilites could be accounted for some major ions and metal (oid)s associated to PM2.5, whereas no correlations comprising considered PM2.5 major ions and metal (oid)s contents and BPA bioaccessibility was observed. In addition, health risk assessment of target PM2.5-associated PAHs via inhalation was assessed in the study area considering both total and bioaccessible concentrations, being averaged human health risks within the safe carcinogenic and non-carcinogenic levels.

Trace elements in dried blood spots as potential discriminating features for metabolic disorder diagnosis in newborns.

Trace elements in dried blood spots (DBSs) from newborns were determined by laser ablation coupled with inductively coupled plasma mass spectrometry, and data were subjected to chemometric evaluation in an attempt to classify healthy newborns and newborns suffering from metabolic disorders. Unsupervised [principal component analysis (PCA) and cluster analysis (CA)] and supervised [linear discriminant analysis (LDA) and soft independent modeling by class analogy (SIMCA)] pattern recognition techniques were used as classification techniques. PCA and CA have shown a clear tendency to form two groups (healthy newborns and newborns suffering from metabolic disorders). LDA and SIMCA have predicted that 90.5% and 83.9% of originally grouped healthy newborn cases were correctly classified by LDA and SIMCA, respectively. In addition, these percentages were 97.6% (LDA) and 80.6% (SIMCA) for DBSs from newborns suffering from metabolic disorders. However, SIMCA has only detected one misclassified DBS from the healthy group, and the lower percentage is attributed to four DBSs from the healthy newborn group and five DBSs from newborns with disorders that were found as belonging to both categories (healthy newborns and newborns with disorders) in the training set. LDA also gave a percentage of grouped maple syrup urine disease (MSUD) cases correctly classified of 100%, although the percentage fells to 66.7% when classifying phenylketonuria (PKU) cases. Finally, essential elements such as Fe, K, Rb, and Zn were found to be matched (correlated) with the concentration of amino acids such as phenylalanine, valine, and leucine, biomarkers linked with MSUD and PKU diseases.

Inhalation bioaccessibility estimation of polycyclic aromatic hydrocarbons from atmospheric particulate matter (PM10): Influence of PM10 composition and health risk assessment.

Polycyclic aromatic hydrocarbons (PAHs) inhalation bioaccessibility was assessed in 65 atmospheric particulate matter samples (PM10) collected at an Atlantic coastal European urban site. The proposed method consists on a physiologically based extraction (PBET) by using Gamble's solution followed by a vortex assisted liquid-liquid micro-extraction (VALLME) and quantification by high performance liquid chromatography with fluorescence detection (HPLC-FLD). The use of a micro-extraction technique combined with FLD detection, provides a simple, fast, sensitive, accurate and low-cost methodology to PAHs quantification in bioaccessible fractions. Accuracy of the bioaccessibility study was assessed by means of a mass balance approaches using a PM10 filter and a certified reference material (ERM-CZ100). High-moderate inhalation bioaccessibilities were found for phenanthrene (Phe), fluoranthene (Ft) and pyrene (Pyr) (average ratios in the 52-65% range); while dibenz (a,h)anthracene (DBahA), indeno (1,2,3-cd)pyrene (IP) and benzo (g,h,i)perylene (BghiP) were observed to be less bioaccessibles (average ratios in the 11-14% range). Relationship between PM10 composition (major ions, trace metals, equivalent black carbon (eBC) and UV-absorbing particulate matter (UVPM)) and PAHs bioaccessibility ratios was also assessed. Principal Component Analysis (PCA) showed that PAHs bioaccessibility percentage is dependent on anthropogenic (eBC, UVPM and Sb concentrations) and marine sources of PM10. Predicted PAHs bioaccessibilities after applying a multiple linear regression model based on marine and anthropogenic source of PM10 could also be established. Health risk assessment of target PM10-associated PAHs via inhalation was assessed considering bioaccessibility concentrations by using hazard index (HI) and BaP equivalent concentration (BaPeq) approaches, suggesting no carcinogenic risk in the area during the sampling campaign.

The occurrence and distribution of polycyclic aromatic hydrocarbons, bisphenol A and organophosphate flame retardants in indoor dust and soils from public open spaces: Implications for human exposure.

Global concern exists regarding human exposure to organic pollutants derived from public open spaces and indoor dust. This study has evaluated the occurrence of 18 polycyclic aromatic hydrocarbons (PAHs), 11 organophosphorus flame retardants (OPFRs) and bisphenol A (BPA). To achieve this, a new simple, efficient and fast multi-residue analytical method based on a fully automated pressurised liquid extraction (PLE) and subsequent quantification by gas chromatography coupled to electron ionization-mass spectrometry (GC-EI-MS) in selected ion monitoring (SIM) mode was developed. The developed method was applied to indoor dust (12 sampling households) and soil derived from two public open spaces (POSs). Among all compounds studied, PAHs were the most ubiquitous contaminants detected in POS soils and indoor dust although some OPFRs and BPA were detected in lower concentrations. An assessment of the incremental lifetime cancer risk (ILCR) was done and indicated a high potential cancer risk from the POS sites and some of the indoor dust sampled sites. However, key variables, such as the actual exposure duration, frequency of contact and indoor cleaning protocols will significantly reduce the potential risk. Finally, the ingestion of soils and indoor dust contaminated with OPFRs and BPA was investigated and noted in almost all cases to be below the USEPA reference doses.

Comparative study of atmospheric water-soluble organic aerosols composition in contrasting suburban environments in the Iberian Peninsula Coast.

This study investigates the structural composition and major sources of water-soluble organic matter (WSOM) from PM2.5 collected, in parallel, during summer and winter, in two contrasting suburban sites at Iberian Peninsula Coast: Aveiro (Portugal) and Coruña (Spain). PM10 samples were also collected at Coruña for comparison. Ambient concentrations of PM2.5, total nitrogen (TN), and WSOM were higher in Aveiro than in Coruña, with the highest levels found in winter at both locations. In Coruña, concentrations of PM10, TN, and WSOM were higher than those from PM2.5. Regardless of the season, stable isotopic δ13C and δ15N in PM2.5 suggested important contributions of anthropogenic fresh organic aerosols (OAs) at Aveiro. In Coruña, δ13C and δ15N of PM2.5 and PM10 suggests decreased anthropogenic input during summer. Although excitation-emission fluorescence profiles were similar for all WSOM samples, multi-dimensional nuclear magnetic resonance (NMR) spectroscopy confirmed differences in their structural composition, reflecting differences in aging processes and/or local sources between the two locations. In PM2.5 WSOM in Aveiro, the relative distribution of non-exchangeable proton functional groups was in the order: HC (40-43%) > HCC (31-39%) > HCO (12-15%) > Ar-H (5.0-13%). However, in PM2.5 and PM10 WSOM in Coruña, the relative contribution of HCO groups (24-30% and 23-29%, respectively) equals and/or surpasses that of HCC (25-26% and 25-29%, respectively), being also higher than those of Aveiro. In both locations, the highest aromatic contents were observed during winter due to biomass burning emissions. The structural composition of PM2.5 and PM10 WSOM in Coruña is dominated by oxygenated aliphatic compounds, reflecting the contribution of secondary OAs from biogenic, soil dust, and minor influence of anthropogenic emissions. In contrast, the composition of PM2.5 WSOM in Aveiro appears to be significantly impacted by fresh and secondary anthropogenic OAs. Marine and biomass burning OAs are important contributors, common to both sites.

Selenium species determination in foods harvested in Seleniferous soils by HPLC-ICP-MS after enzymatic hydrolysis assisted by pressurization and microwave energy.

Fast, green, automated, highly efficient and accurate methodology for extracting selenium species in foods samples (Brazil nut, golden berries and heart of palm) harvested in seleniferous soils by using pressurized-assisted enzymatic hydrolysis (PAEH) and microwave-assisted enzymatic hydrolysis (MAEH) were optimized. After foods defatting or drying, selenium species were released using protease XIV and enzyme activator in 7 and 12 min for PAEH and MAEHmethods, respectively. Inductively coupled plasma - mass spectrometry (ICP-MS) and high performance liquid chromatography (HPLC) coupled with ICP-MS detection were used to assess total selenium and selenium species contents in the enzymatic extracts. Analytical performances, such as limits of quantification (0.032-0.599 µg g-1 and 0.014-0.240 µg g-1 for PAEH and MAEH, respectively), repeatability (11-14.5%) and accuracy of the over-all procedures were established. Selenomethionine (SeMet) were detected in all analyzed samples and selenocystine (SeCys2) in Brazil nut; however, SeMet and SeCys2 levels were only quantified in Brazil nut. Inorganic selenium species were not detected in any sample. The presence of SeMet and SeCys2 and the absence of oxidized selenium methionine (SeOMet) in the enzymatic extracts were confirmed by Orbitrap mass spectrometry.

Development of dried serum spot sampling techniques for the assessment of trace elements in serum samples by LA-ICP-MS.

A novel approach for serum analysis by dried matrix spot (DMS) technique is proposed. The methodology consists of sampling filter paper discs (2.7 mm in diameter) containing the large amount of serum retained after a single spotting. Several oxidizers (sodium chlorate, sodium azide, acetic acid, formic acid, 1-butyl-3-methylimidazoliumm chloride/bromide) were tested (oxidizers premixed with the sample before spotting, and papers previously soaked in concentrated additive/oxidizer solutions). Direct multi-element determination (Al, Be, Ca, Cu, Fe, K, Li, Mg, Mn, Mo, Na, P, Rb, Se, V, and Zn) in dried serum spots at very low levels was therefore assessed by laser ablation (LA) coupled with inductively coupled plasma - mass spectrometry (ICP-MS). Laser ablation was performed using a focused Nd: YAG laser beam in lineal scan mode (wavelength 213 nm, laser fluency 2.2 J cm-2, repetition rate 20 Hz, laser spot diameter 90 µm, depth 0 µm, scanning speed 12 µm s-1). Matrix-matched calibration mode and 13C as internal standard (for signal intensities normalization) was used throughout the work. Limits of quantification were found to be from 21 µg L-1 to 221 mg L-1. Repeatability (seven ablations of the same dried serum spot) and reproducibility (two ablations of seven dried serum spot from the same material) offered RSDs below 12% for all analytes, which seems satisfactory for clinical purposes. The method was validated by analyzing several certified reference materials (Seronorm™ level I and II trace elements in serum), and it was applied to several DMS from serum samples from healthy adults.

In vivo and in vitro testing for selenium and selenium compounds bioavailability assessment in foodstuff.

The assessment of selenium and selenium species bioavailability in foodstuff is of special concern on the context of human nutrition. In vivo (human and animal), and in vitro tests are important approaches for estimating the bioavailability of toxic and essential compounds to humans. An overview on in vivo and in vitro bioavailability assays for releasing selenium and selenium species in foodstuffs is summarized. Se and Se species content in a foodstuff critically influence Se bioavailability and bioactivity to humans and animals. Se bioavailability is affected by foodstuff-matrix major composition and minor components. Foodstuffs processing and/or treatments could enhancement or decrease Se bioavailability. Experimental conditions such as the selection of healthy status of examined people (in in vivo humans approaches), the selection of animal model (in vivo animals approaches), or the selection of GI conditions (in in vitro tests) could determines the results. Thus, international standardized protocol for in vivo and in vitro approaches assessment is mandatory.

Bioavailability assessment of essential and toxic metals in edible nuts and seeds.

Bioavailability of essential and toxic metals in edible nuts and seeds has been assessed by using an in vitro dialyzability approach. The samples studied included walnuts, Brazil nuts, Macadamia nuts, pecans, hazelnuts, chestnuts, cashews, peanuts, pistachios and seeds (almond, pine, pumpkin and sunflower). Metals were measured by inductively coupled plasma-mass spectrometry in dialyzates and also in samples after a microwave assisted acid digestion pre-treatment. Low dialyzability percentages were found for Al, Fe and Hg; moderate percentages were found for Ba, Ca, Cd, Co, Cu, K, Li, Mg, Mn, Mo, P, Pb, Se, Sr, Tl and Zn; and high dialyzability ratios were found for As, Cr and Ni. The highest dialyzability percentages were found in raw chestnuts and raw hazelnuts. Metal dialyzability was found to be negatively affected by fat content. Positive correlation was found between carbohydrate content and metal dialyzability ratios. Protein and dietary fibre content did not influence metal bioavailability. Predicted dialyzability for some metals based on fat and protein content could also be established.

In vitro bioavailability of total selenium and selenium species from seafood.

In vitro bioavailability of total selenium and selenium species from different raw seafood has been assessed by using a simulated gastric and intestinal digestion/dialysis method. Inductively coupled plasma-mass spectrometry (ICP-MS) was used to assess total selenium contents after a microwave assisted acid digestion, and also to quantify total selenium in the dialyzable and non-dialyzable fractions. Selenium speciation in the dialyzates was assessed by high performance liquid chromatography (HPLC) coupled with ICP-MS detection. Major Se species (selenium methionine and oxidized selenium methionine) from dialyzate were identified and characterized by HPLC coupled to mass spectrometry (HPLC-MS). Selenocystine was detected at low concentrations while Se-(Methyl)selenocysteine and inorganic selenium species (selenite and selenate) were not detected in the dialyzate. Low bioavailability percentages for total selenium (6.69±3.39 and 5.45±2.44% for fish and mollusk samples, respectively) were obtained. Similar bioavailability percentages was achieved for total selenium as a sum of selenium species (selenocystine plus oxidized selenium methionine and selenium methionine, mainly). HPLC-MS data confirmed SeMet oxidation during the in vitro procedure.

Arsenic species determination in human scalp hair by pressurized hot water extraction and high performance liquid chromatography-inductively coupled plasma-mass spectrometry.

Analytical methods for the determination of total arsenic and arsenic species (mainly As(III) and As(V)) in human scalp hair have been developed. Inductively coupled plasma-mass spectrometry (ICP-MS) and high performance liquid chromatography (HPLC) coupled to ICP-MS have been used for total arsenic and arsenic species determination, respectively. The proposed methods include a "green", fast, high efficient and automated species leaching procedure by pressurized hot water extraction (PHWE). The operating parameters for PHWE including modifier concentration, extraction temperature, static time, extraction steps, pressure, mean particle size, diatomaceous earth (DE) mass/sample mass ratio and flush volume were studied using design of experiments (Plackett-Burman design PBD). Optimum condition implies a modifier concentration (acetic acid) of 150 mM and powdered hair samples fully mixed with diatomaceous earth (DE) as a dispersing agent at a DE mass/sample mass ratio of 5. The extraction has been carried out at 100°C and at an extraction pressure of 1500 psi for 5 min in four extraction step. Under optimised conditions, limits of quantification of 7.0, 6.3 and 50.3 ng g(-1) for total As, As(III) and As(V), respectively were achieved. Repeatability of the overall procedure (4.4, 7.2 and 2.1% for total As, As(III) and As(V), respectively) was achieved. The analysis of GBW-07601 (human hair) certified reference material was used for validation. The optimised method has been finally applied to several human scalp hair samples.

Use of pressurized hot water extraction and high performance liquid chromatography-inductively coupled plasma-mass spectrometry for water soluble halides speciation in atmospheric particulate matter.

The feasibility of pressurized hot water extraction (PHWE) has been novelty investigated to speed up water soluble halide species (bromide, Br(-); bromate, BrO(3)(-); iodide, I(-) and iodate, IO(3)(-)) leaching from atmospheric particulate matter (PM(10) and PM(2.5)). Total bromine and iodine and total water soluble bromine and iodine have been assessed by inductively coupled plasma-mass spectrometry (ICP-MS). Water-soluble bromine and iodine species were also measured by ICP-MS after anion exchange high performance liquid chromatography (HPLC). Variables inherent to the pressurized hot water extraction process (temperature, modifier concentration, static time, pressure, number of cycles and dispersing agent mass) were fully studied. Results showed that the pressurized leaching procedure can be performed in 9 min (5 min for pre-heating, 2 min of static time, 1 min of purge time, and 1 min of end relief time). The use of diluted acetic acid as a modifier did not improve the target recoveries. Dispersing agent (diatomaceous earth) was not needed, which reduces the time for filling the cells. Water-soluble halides were reached under the following extraction conditions: extraction temperature of 100 °C, pressure of 1500 psi, static time of 2 min and 1 extraction cycle. Optimized HPLC conditions consisted of an isocratic elution with 175 mM ammonium nitrate plus 15% (v/v) methanol as mobile phase (optimum flow rate of at 1.5 mL min(-1)). Analytical performances, such as limits of detection and quantification, repeatability and analytical recoveries of the over-all procedure have been established. Results obtained show water soluble halides accounted for approximately 20.9±1.3 and 11.8±0.6% of the total bromine and total iodine, respectively. A 79 and 89% of bromine and iodine was non-water soluble, which may be organic non-water soluble species. Br(-) and IO(3)(-) were found to be the major species, and they accounted for 100% of the total water-soluble bromine and iodine.

Speciation of the bio-available iodine and bromine forms in edible seaweed by high performance liquid chromatography hyphenated with inductively coupled plasma-mass spectrometry.

A bioavailability study based on an in vitro dialyzability approach has been applied to assess the bio-available fractions of iodine and bromine species from edible seaweed. Iodide, iodate, 3-iodo-tyrosine (MIT), 3,5-diiodo-tyrosine (DIT), bromide and bromate were separated by anion exchange chromatography under a gradient elution mode (175 mM ammonium nitrate plus 15% (v/v) methanol, pH 3.8, as a mobile phase, and flow rates within the 0.5-1.5 mL min(-1) range). Inductively coupled plasma-mass spectrometry (ICP-MS) was used as a selective detector for iodine ((127)I) and bromine ((79)Br). Low dialyzability ratios (within the 2.0-18% range) were found for iodine species; whereas, moderate dialyzability percentages (from 9.0 to 40%) were obtained for bromine species. Iodide and bromide were the major species found in the dialyzates from seaweed, although MIT and bromate were also found in the dialyzates from most of the seaweed samples analysed. However, DIT was only found in dialyzates from Wakame, Kombu, and NIES 09 (Sargasso) certified reference material; whereas, iodate was not found in any dialyzate. Iodine dialyzability was found to be dependent on the protein content (negative correlation), and on the carbohydrate and dietary fibre levels (positive correlation). However, bromine dialyzability was only dependent on the protein amount in seaweed (negative correlation).