ABSTRACT
Aggressive ossifying fibroma is a benign fibro-osseous disorder characterized by its aggressive behavior, which complicates its management. In this article, we present a case involving the recurrence of this condition in the maxillary region, with orbital and dental involvement, in a patient who had previously undergone surgery and reconstruction with a microvascularized free fibula flap. A multidisciplinary approach involving maxillofacial surgery and dentistry was employed to deliver a customized and entirely satisfactory solution for the patient. The use of 3D surgery was integral to our approach, encompassing pre-surgical digital planning and the transfer of this planning to the operating room via navigation software. Customized surgical cutting guides facilitated precise resection, while a personalized polyether ether ketone (PEEK) prosthesis was utilized for reconstruction of the malar and infraorbital region. Pre-prosthetic computer-aided design/computer-aided manufacturing (CAD/CAM) surgery, along with dental rehabilitation using transepithelial abutments and dental prostheses on a titanium framework, were employed for dental restoration. During the postoperative period, mobility in the reconstructed maxilla was observed due to the loss of support from the initial reconstruction plate. This was addressed by replacing the plate with a custom-made titanium plate, designed to accommodate the location of the transepithelial abutments and prevent disruption of the dental rehabilitation. This case demonstrates the potential of new technologies when applied within the collaborative framework of maxillofacial surgeons and dentists, enabling effective and definitive solutions in complex reconstruction cases. Key words:Aggressive ossifying fibroma; 3D surgery; customized reconstruction; complex dental reconstruction.
ABSTRACT
Maxillofacial surgery planning has been improved by technological advances in 3D printing. The use of customized cutting and positioning guides allows intraoperative reproduction of pre-planned osteotomy cuts, resulting in increased surgical accuracy, reduced surgical time and improved esthetic and functional outcomes. Our paper presents a new method for creating and printing in-house cutting and positioning guides. A computer program (Brainlab iPlan) was used to segment the mandible for three-dimensional planning from imported conventional computed tomography (CT) scans. The virtual model of the mandible was printed on a stereolithography (SLA) 3D printer and a reconstruction plate was adapted to the printed model. The surface of the model and the screw-retained plate was scanned using a structured light surface 3D scanner (Artec Eva). The obtained scan of the jaw and plate in position was processed and transformed into an STL file. Free software (Autodesk Meshmixer) superimposes the initial jaw on the scanned jaw with the plate, designing a customized hybrid cutting guide that allows accurate intraoperative positioning, knowing the exact position of the reconstruction plate screws in the jaw. The total design, fabrication and 3D printing time for the in-house hybrid guide was 595 min. The average total printing cost was EUR 16. We found the technique to be simple and repeatable. We present and describe here a novel and simple technique for in-house 3D printed positioning and cutting guide system which can be applied to overall maxillofacial area. In cases of mandibular reconstruction, this protocol guarantees an adequate esthetic and functional result. Key words:Oral cancer, 3D surgery, CAD/CAM, personalized medicine, surgical guides, in house.
ABSTRACT
Advances in 3D printing technology have the potential to significantly improve the workflow of maxillofacial surgical planning. In-house fabricated custom positioning and cutting guides allow for intraoperative reproduction of pre-planned osteotomy cuts, which can result in greater surgical accuracy and patient safety while maintaining an acceptable cost-effectiveness ratio. The design and creation of the customized surgical guides is performed in our hospital fab lab, which allows time savings, from an average of 10 days to just 24 hours, and a cost reduction of more than 90%. The process begins with the import of the pre-surgical facial CT scan into 3D software that allows to perform the surgical cuts virtually and the manipulation of the segments. Once the virtual planning of the surgery has been performed, the next step is the creation of the cutting and positioning guides. The final step is the printing of the guides in surgical resin and their sterilization. In addition, post-surgical models can be 3D printed to pre-mold the plates on them, which saves surgical time. The mentoplasty surgery is a simple example of how 3D surgery can be applied to maxillofacial surgery in an efficient way obtaining all the advantages of customized surgery with a limited investment in time and resources. Key words:3Dsurgery, customized, personalized medicine, genioplasty, surgical guides, in house.
ABSTRACT
La tuberculosis (TB) es una enfermedad granulomatosa crónica que afecta de forma primordial a los pulmones. La afectación de la cavidad oral es rara, lo que hace que sea infradiagnosticada e infratratada. Dicha afectación puede ser primaria o secundaria, siendo más común la afectación secundaria. Exponemos el caso de un varón fumador de 39 años que presenta una lesión ulcerada en mucosa yugal izquierda de 3 semanas de evolución. Se tomó biopsia con resultado de mucosa escamosa con ulceración e intensa inflamación crónica granulomatosa no necrotizante. Además, presentaba una lesión cavitada a nivel pulmonar. Escribimos este artículo con el fin de determinar la importancia de realizar un buen diagnóstico diferencial de las lesiones ulcerativas de la cavidad oral y recalcar el manejo multidisciplinar de esta patología. (AU)
Tuberculosis (TB) is a chronic granulomatous disease which affects the lungs in majority of the cases. Tuberculosis of the oral cavity may be overlooked in the differential diagnosis of oral lesions and can be misdiagnosed and managed incorrectly. Oral manifestations of TB are seen both in primary and secondary stages of the disease but are most commonly associated with secondary TB. A 39-year-old smoker man with an ulcerative oral lesion came to the emergency room. A partial incisional biopsy was performed, with the result of squamous mucosa with ulceration and intense chronic non-necrotizing granulomatous inflammation. In addition, he had a cavitated lesion in the lung. We write this article in order to determine the importance of making a good differential diagnosis of ulcerative lesions of the oral cavity and emphasize the multidisciplinary management of this pathology. (AU)
