ABSTRACT
Three xanthophylls [(3R,3'R,6'R)-lutein (1), (3R,3'S)-zeaxanthin (2), and (3R,3'S)-astaxanthin (3)] were used for the first time as initiators in the ring-opening polymerization (ROP) of ε-caprolactone (CL) catalyzed by tin(ii) 2-ethylhexanoate [Sn(Oct)2] for the synthesis of novel sustainable xanthophyll-containing poly(ε-caprolactone)s (xanthophylls-PCL). The obtained polyesters were characterized by 1H and 13C NMR, FT-IR, DSC, SEC, and MALDI-TOF MS, and their use as additives in green lubricants was evaluated using a sliding friction test under boundary conditions. Xanthophylls-PCL were obtained with good conversions and with molecular weights determined by SEC to be between 2500 and 10 500 Da. The thermal properties of xanthophyll-polyesters showed a crystalline domain, detected by DSC. Lastly, the green lubricant activity of these polymers was evaluated and the results showed that xanthophylls-PCL could be employed as additives for biodegradable lubricant applications since they have better tribological behavior than current additives, which demonstrates their potential as future commercial materials with interesting eco-friendly properties for diverse applications.
ABSTRACT
The present study focuses on an introductory analysis of the use of three xanthophylls as additives for green lubricant applications. For this purpose, the additives were characterized by FTIR and 1H-NMR techniques, and the bio-lubricants were described by their physical properties. The effect of the natural compounds on the friction and wear properties of bio-lubricants were evaluated by sliding friction tests under boundary conditions, as confirmed by an analysis of the lubricating film thickness. The antioxidant capacity was analyzed by FTIR spectroscopy. It was observed better wear protection in castor oil with xanthophylls than without these additives. The wear rate was reduced up to 50% compared with neat oil. Lesser beneficial effects were appreciated in friction coefficient since it was increased 25%. The best contribution was observed with astaxanthin as an additive. In addition, a significant improvement in the oxidation of castor oil, complemented with this additive, was exhibited by FTIR analysis. It was found that xanthophylls could be employed as additives for totally biodegradable lubricant applications since they have better tribological and antioxidant behavior than current additives.
ABSTRACT
Silver nanoparticles have been functionalized in situ with the electrically conducting polymer, poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) via colloidal synthesis. The formation of the functionalized silver nanoparticles, hereafter designated Ag(PEDOT:PSS), was confirmed by the appearance of the characteristic plasmon absorption peak at 420 nm in the UV-Vis spectrum of the aqueous suspension and by TEM analysis, where spherical particles with a mean size of around 8 nm (metallic core) were observed. Homogeneous thin films with granular topography, as observed by AFM, were prepared by self assembly. Electrical studies of the films showed an increase in electrical conductivity of three orders of magnitude with respect to the polymer film presumably due to the presence of the silver core. The conductive polymer/silver composite films also exhibit interesting electrochromic switching between blue and brown. These properties suggest the possibility of a variety of applications of Ag(PEDOT:PSS) films such as in electro optics devices, smart windows, amperometric sensors and capacitors.
ABSTRACT
Reducing the operation temperature of solid oxide fuel cells is a major challenge towards their widespread use for power generation. This has triggered an intense materials research effort involving the search for novel electrolytes with higher ionic conductivity near room temperature. Two main directions are being currently followed: the use of doping strategies for the synthesis of new bulk materials and the implementation of nanotechnology routes for the fabrication of artificial nanostructures with improved properties. In this paper, we review our recent work on solid oxide fuel cell electrolyte materials in these two directions, with special emphasis on the importance of disorder and reduced dimensionality in determining ion conductivity. Substitution of Ti for Zr in the A(2)Zr(2-) (y)Ti(y)O(7) (A = Y, Dy, and Gd) series, directly related to yttria stabilized zirconia (a common fuel cell electrolyte), allows controlling ion mobility over wide ranges. In the second scenario we describe the strong enhancement of the conductivity occurring at the interfaces of superlattices made by alternating strontium titanate and yttria stabilized zirconia ultrathin films. We conclude that cooperative effects in oxygen dynamics play a primary role in determining ion mobility of bulk and artificially nanolayered materials and should be considered in the design of new electrolytes with enhanced conductivity.
